No images in this repository’s iceberg at this time
Download raw (51.2 KB)
******************************************************** 1968-baudrillard_system-of-objects_full-text.txt ******************************************************** 26 The analysis could be extended to the level of metalanguage (a system the signified of metalinguistic denotation is only an effect of the Sr, only 2 The hypothesis, in the same mode, at the metalinguistic level, that ******************************************************** 2013-TARIC-nomenclature_index.txt ******************************************************** Natural sands of all kinds, whether or not coloured, other than metal-bearing sands of Chapter|26 Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling or for railway or other ballast, shingle and flint, whether or not heat-treated; macadam of slag, dross or similar industrial waste, whether or not incorporating the materials cited in the first part of the heading; tarred macadam; granules, chippings and powder, of stones of heading|2515|or 2516, whether or not heat-treated Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling or for railway or other ballast, shingle and flint, whether or not heat-treated Precious-metal ores and concentrates Slag, ash and residues (other than from the manufacture of iron or steel), containing metals, arsenic or their compounds Containing arsenic, mercury, thallium or their mixtures, of a kind used for the extraction of arsenic or those metals or for the manufacture of their chemical compounds Hydrogen, rare gases and other non-metals Alkali or alkaline-earth metals; rare-earth metals, scandium and yttrium, whether or not intermixed or interalloyed; mercury Alkali or alkaline-earth metals Lithium metal of a purity by weight of 98,8|% or more (CAS|RN 7439-93-2) Rare-earth metals, scandium and yttrium, whether or not intermixed or interalloyed Alloy of cerium with other rare-earth metals, containing by weight 47 % or more of cerium Other inorganic acids and other inorganic oxygen compounds of non-metals Other inorganic oxygen compounds of non-metals Halides and halide oxides of non-metals Sulphides of non-metals; commercial phosphorus trisulphide Dichromium trioxide for use in metallurgy (CAS RN 1308-38-9) Titanium dioxide (CAS RN 13463-67-7)|with a purity by weight of 99,7|% or more|and|containing by weight: -|not more than 0,005|% of potassium and sodium combined (expressed as elemental sodium and elemental potassium), -|not more than 0,01|% of phosphorus (expressed as elemental phosphorus), for use in the metallurgy Hydrazine and hydroxylamine and their inorganic salts; other inorganic bases; other metal oxides, hydroxides and peroxides Lithium carbonate, containing one or more of the following impurities at the concentrations indicated: -|2|mg/kg or more of arsenic, -|200|mg/kg or more of calcium, -|200|mg/kg or more of chlorides, -|20|mg/kg or more of iron, -|150|mg/kg or more of magnesium, -|20|mg/kg or more of heavy metals, -|300|mg/kg or more of potassium, -|300|mg/kg or more of sodium, -|200|mg/kg or more of sulphates, determined according to the methods specified in the European Pharmacopœia Silicates; commercial alkali metal silicates Salts of oxometallic or peroxometallic acids Colloidal precious metals; inorganic or organic compounds of precious metals, whether or not chemically defined; amalgams of precious metals Colloidal precious metals Silver oxide, nitrate- and carbonate-free, with a silver content of at least 99.99|% by weight of the metal content, for the manufacture of silver oxide batteries Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals Compounds of mixtures of metals Other inorganic compounds (including distilled or conductivity water and water of similar purity); liquid air (whether or not rare gases have been removed); compressed air; amalgams, other than amalgams of precious metals Esters of other inorganic acids of non-metals (excluding esters of hydrogen halides) and their salts; their halogenated, sulphonated, nitrated or nitrosated derivatives Acid dyes, whether or not premetallised, and preparations based thereon; mordant dyes and preparations based thereon Pigments (including metallic powders and flakes) dispersed in non-aqueous media, in liquid or paste form, of a kind used in the manufacture of paints (including enamels); stamping foils; dyes and other colouring matter put up in forms or packings for retail sale Polishes and creams, for footwear, furniture, floors, coachwork, glass or metal, scouring pastes and powders and similar preparations (whether or not in the form of paper, wadding, felt, nonwovens, cellular plastics or cellular rubber, impregnated, coated or covered with such preparations), excluding waxes of heading|3404 Polishes and similar preparations for coachwork, other than metal polishes Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,15|mm or more but not more than 0,8|mm, not covered with a release film, of a total thickness of not more than 1|mm Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods Pickling preparations for metal surfaces; soldering, brazing or welding powders and pastes consisting of metal and other materials Soldering or welding paste, consisting of a mixture of metals and resin containing by weight: -|70|% or more, but not more than 90|% of tin -|not more than 10|% of one or more metals of silver, copper, bismuth, zinc, or indium for use in the electro technical industry With precious metal or precious-metal compounds as the active substance Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2cm3/g or more (as determined by the nitrogen absorption method) Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20|% or more but not more than 40|% of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile Catalyst, -|in the form of solid spheres, -|of a diameter of 4|mm or more but not more than 12|mm, and -|consisting of a mixture of molybdenum oxide and other metal oxides, supported on silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid Catalyst in the form of spheres of a diameter of 4,2|mm or more but not|more than 9|mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder Catalyst: -|containing molybdenum oxide and other metal oxides in a silicon dioxide matrix, -|in the form of hollow cylindrical solids of a length of 4|mm or more but not more than 12|mm for use in the manufacture of acrylic acid Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2|% or more but not more than 3|% of rare-earth metal oxides and less than 1|% of disodium oxide Non-agglomerated metal carbides mixed together or with metallic binders Tungsten carbide simply mixed with metallic powder Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts Mixed metals oxides, in the form of powder, containing by weight: -|either 5|% or more of barium, neodymium or magnesium and 15|% or more of titanium, -|or 30|% or more of lead and 5|% or more of niobium, for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors Catalyst containing by weight of -|52|%|(±|10|%) of cuprous oxide (CAS|RN|1317-39-1), -|38|%|(±|10|%) of cupric oxide (CAS|RN|1317-38-0) and -|10|% (±|5|%) of metallic copper (CAS|RN|7440-50-8) Wastes of metal-pickling liquors, hydraulic fluids, brake fluids and anti-freeze fluids Mixture containing by weight: -|45|% or more but not more than 65|% of polymers of styrene -|35|% or more but not more than 45|% of poly(phenylene ether) -|not more than 10|% of other additives and with one or more of the following special colour effects: -|metallic or pearlescent with a visual angular metamerism caused by at least 0,3|% flake-based pigment -|fluorescent, as characterized by emitting light during absorption of ultraviolet radiation -|bright white, as characterized by L*|not less than 92|and b* not more than 2|and a* between -5|and 7|on the|CIELab colour scale Reflecting sheet: -|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -|covered on one or both sides with one or more layers of plastic or metallisation, and -|whether or not covered on one side with a self-adhesive layer and a release sheet Reflecting film consisting of -|a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, -|a layer of an acrylic resin having embedded glass beads, -|a layer of an acrylic resin hardened by a melamine cross-linking agent, -|a metal layer, -|an acrylic adhesive, and -|a release film Self-adhesive reflecting sheet whether or not in segmented pieces, -|whether or not containing a watermark, -|with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: -|a layer of acrylic or vinyl polymer, -|a layer of poly(methyl methacrylate)| or| polycarbonate containing microprisms, -|a layer of metallisation, -|an adhesive layer, and -|a release sheet -|whether or not containing an additional layer of polyester Self adhesive reflecting film, consisting of several layers including: -|a copolymer of acrylic resin, -|polyurethane,| -|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, -|glass microspheres, and -|an adhesive layer, with a release liner on one or both sides Reflecting sheet: -|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -|covered on one or both sides with one or more layers of plastic or metallisation, and -|whether or not covered on one side with a self-adhesive layer and a release sheet Self-adhesive reflecting sheet whether or not in segmented pieces, -|whether or not containing a watermark, -|with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: -|a layer of acrylic or vinyl polymer, -|a layer of poly(methyl methacrylate)| or| polycarbonate containing microprisms, -|a layer of metallisation, -|an adhesive layer, and -|a release sheet -|whether or not containing an additional layer of polyester Reflecting film containing: -|a poly(vinyl chloride) layer, -|a polyurethane layer, -|a glass microspheres layer, -|a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view, -|a metallised aluminium layer, and -|an adhesive, covered on one side with a release liner Self-adhesive film with a thickness of 40 µm or more, but not more than 400 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner Self adhesive reflecting film, consisting of several layers including: -|a copolymer of acrylic resin, -|polyurethane,| -|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, -|glass microspheres, and -|an adhesive layer, with a release liner on one or both sides Multi-layered film of poly(methyl methacrylate) and metallised layers of silver and copper: -|having a minimum reflectance of 93,5|% as determined by ASTM G173-03, -|covered on one side with a removable layer of polyethylene, -|covered on the other side with an acrylic pressure sensitive adhesive and a siliconised polyester liner Non-self adhesive reflecting film, consisting of several layers including: -|a copolymer of acrylic resin -|polyurethane -|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use -|glass microspheres, and -|a permanent liner of poly(ethyleneterephthalate) Reflecting sheet: -|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -|covered on one or both sides with one or more layers of plastic or metallisation, and -|whether or not covered on one side with a self-adhesive layer and a release sheet Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25|µm, either: -|only dyed in the mass, or -|dyed in the mass and metallised on one side Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120|µm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1|% of aluminium, of a thickness of not more than 300|µm and having a surface resistivity of not more than 10|000|ohms (per square) (as determined by the ASTM D 257-99|method) Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: -|a visible light transmission of 50|% or more, -|coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral), -|a total thickness of not more than 0,2|mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2|mm Transparent polyurethane film metallised on one side: -|with a gloss of more than 90|degrees according to ASTM|D2457 -|covered on the metalized side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer -|covered on the other side with a protective poly(ethylene terephthalate) film -|with a total thickness of more than 204|µm but not more than 244|µm Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: -|microspheres with a coating of metal, whether or not alloyed with gold, -|an adhesive layer, -|with a protective|layer of silicone or poly(ethylene terephthalate) on one|side,| -|with a protective layer of poly(ethylene terephthalate) on the other side, and -|with a width of 5|cm or more but not more than 100|cm -|with a length of not more than 2|000|m Heat-, infra- and UV insulating poly(vinyl butyral) film: -|laminated with a metal layer with a thickness of 0,05|mm(±0,01|mm), -|containing by weight 29,75|% or more but not more than 40,25|% of triethyleneglycol di (2-ethyl hexanoate) as plasticizer, -|with a light transmission of 70|% or more (as determined by the ISO 9050|standard); -|with an UV transmission of|1|% or less (as determined by the ISO 9050|standard); -|with a total thickness of 0,43|mm (± 0,043|mm) Film, of a specular gloss of 30|or more but not more than 60|measured at an angle of 60|° using a glossmeter (as determined by the ISO 2813:2000|method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), joined by a metallised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances Roll of polymer-metal laminate comprising: -|a layer of poly(ethylene terephthalate), -|a layer of aluminium, -|a layer of polypropylene, -|with a width of not more than 275|mm, -|a total thickness of not more than 165|μm, and -|conforming to ASTM|D1701-91|and ASTM|D882-95A for use in the manufacture of lithium-ion electric vehicle batteries Reinforced or otherwise combined only with metal Rubber brake hose with -|textile strings, -|a wall thickness of 3,2|mm, -|a metal hollow terminal pressed on both ends, and -|one or more mounting brackets, of kind used in the manufacture of goods of Chapter 87 Reinforced only with metal Rubber-to-metal bonded parts Rubber-to-metal bonded parts Chamois (including combination chamois) leather; patent leather and patent laminated leather; metallised leather Patent leather and patent laminated leather; metallised leather Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading|5404|or 5405, combined with metal in the form of thread, strip or powder or covered with metal Of silk, of waste silk other than noil, of synthetic fibres, of yarn of heading|5605|or of textile materials containing metal threads Woven fabrics of metal thread and woven fabrics of metallised yarn of heading|5605, of a kind used in apparel, as furnishing fabrics or for similar purposes, not elsewhere specified or included Transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material Footwear incorporating a protective metal toecap Incorporating a protective metal toecap Incorporating a protective metal toecap Other footwear, incorporating a protective metal toecap Discs -|of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy, -|having a self-sharpening effect by constant release of the diamonds, -|suitable for abrasive cutting of wafers, -|whether or not containing a hole in the centre, -|whether or not on a support -|with a weight of not more than 377|g per piece and -|with an external diameter of not more than 206|mm Base metals clad with silver, not further worked than semi-manufactured Base metals or silver, clad with gold, not further worked than semi-manufactured Base metals, silver or gold, clad with platinum, not further worked than semi-manufactured Waste and scrap of precious metal or of metal clad with precious metal; other waste and scrap containing precious metal or precious-metal compounds, of a kind used principally for the recovery of precious metal Ash containing precious metal or precious-metal compounds Of gold, including metal clad with gold but excluding sweepings containing other precious metals Of platinum, including metal clad with platinum but excluding sweepings containing other precious metals Articles of jewellery and parts thereof, of precious metal or of metal clad with precious metal Of precious metal whether or not plated or clad with precious metal Of silver, whether or not plated or clad with other precious metal Of other precious metal, whether or not plated or clad with precious metal Of base metal clad with precious metal Articles of goldsmiths' or silversmiths' wares and parts thereof, of precious metal or of metal clad with precious metal Of precious metal whether or not plated or clad with precious metal Of silver, whether or not plated or clad with other precious metal Of other precious metal, whether or not plated or clad with precious metal Of base metal clad with precious metal Other articles of precious metal or of metal clad with precious metal Of base metal, whether or not plated with precious metal Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70 % or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70 % or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70 % or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) Plated or coated with other base metals Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin Painted, varnished or coated with plastics on at least one side, excluding so-called "sandwich panels" of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin Painted, varnished or coated with plastics on at least one side, excluding so-called "sandwich panels" of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin Current-conducting, with parts of non-ferrous metal Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel Expanded metal Bi-metal self-drilling screws, having a shank and head of stainless steel and a point and leading threads of carbon steel, which are welded together allowing the screw to self-drill its own pilot hole and cut its own thread into hard steel metal; bi-metal self-tapping screws, having a shank and head of stainless steel and leading threads of carbon steel which are welded together, allowing the screw to cut its own thread into hard steel metal Iron and steel weights -|whether or not with parts of other material -|whether or not with parts of other metals -|whether or not surface treated -|whether or not printed of a kind used for the production of remote controls Cloth (including endless bands), grill and netting, of wire of which no cross-sectional dimension exceeds 6|mm; expanded metal Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy Nickel oxide sinters and other intermediate products of nickel metallurgy Cobalt mattes and other intermediate products of cobalt metallurgy; cobalt and articles thereof, including waste and scrap Cobalt mattes and other intermediate products of cobalt metallurgy; unwrought cobalt; powders Beryllium, chromium, germanium, vanadium, gallium, hafnium, indium, niobium (columbium), rhenium and thallium, and articles of these metals, including waste and scrap Straight saw blades, for working metal For working metal Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal-cutting shears, pipe-cutters, bolt croppers, perforating punches and similar hand tools Interchangeable tools for hand tools, whether or not power-operated, or for machine tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock-drilling or earth-boring tools Dies for drawing or extruding metal For working metal Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles For working metal For working metal, with working part For working metal For working metal For working metal, with working part For working metal, with working part For working metal For working metal For metalworking Handles of base metal Sets of assorted articles containing at least one article plated with precious metal Containing only articles plated with precious metal Plated with precious metal Padlocks and locks (key, combination or electrically operated), of base metal; clasps and frames with clasps, incorporating locks, of base metal; keys for any of the foregoing articles, of base metal Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal Armoured or reinforced safes, strongboxes and doors and safe deposit lockers for strong-rooms, cash or deed boxes and the like, of base metal Filing cabinets, card-index cabinets, paper trays, paper rests, pen trays, office-stamp stands and similar office or desk equipment, of base metal, other than office furniture of heading|9403 Fittings for loose-leaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal Lever arch mechanisms for archiving sheets and other documents in binders and files consisting of arched sturdy metal elements (normally two) on a back plate and having at least one opening trigger that permits inserting and filing of sheets and other documents Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal Plated with precious metal Flexible tubing of base metal, with or without fittings Of other base metal Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing, footwear, awnings, handbags, travel goods or other made-up articles, tubular or bifurcated rivets, of base metal; beads and spangles of base metal Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal Sign-plates, nameplates, address-plates and similar plates, numbers, letters and other symbols, of base metal, excluding those of heading|9405 Wire, rods, tubes, plates, electrodes and similar products, of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying Coated electrodes of base metal, for electric arc-welding Cored wire of base metal, for electric arc-welding Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals Vacuum-vapour plant for the deposition of metal Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Calendering or other rolling machines, other than for metals or glass, and cylinders therefor Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Converters, ladles, ingot moulds and casting machines, of a kind used in metallurgy or in metal foundries Machining centres, unit construction machines (single station) and multi-station transfer machines, for working metal Lathes (including turning centres) for removing metal Machine tools (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes (including turning centres) of heading|8458 Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading|8461 Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included Machine tools (including presses) for working metal by forging, hammering or die-stamping; machine tools (including presses) for working metal by bending, folding, straightening, flattening, shearing, punching or notching; presses for working metal or metal carbides, not specified above Other machine tools for working metal or cermets, without removing material Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer For treating metal, including electric wire coil-winders Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics Moulding boxes for metal foundry Moulds for metal or metal carbides Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal Parts of deflash machines for cleaning the metal leads of semiconductor packages prior to the electroplating process Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Of metal Coil for an electromagnetic valve, with: -|a plunger -|a diameter of 12,9|mm (+/- 0,1), -|a height without plunger of 20,5|mm (+/- 0,1), -|an electric cable with connector, and in a cylindrical metal housing Nickel-metal hydride Rectangular lithium-ion-accumulator, with -|a metal casing, -|a length of 173|mm (±|0,15|mm), -|a width of 21|mm (±|0,1|mm), -|a height of 91|mm (±|0,15|mm), -|a nominal voltage of 3,3|V and, -|a nominal capacity of 21|Ah|or more Rectangular lithium-ion-accumulator or module, with -|a metal casing, -|a length of 171|mm (±|3|mm), -|a width of 45,5|mm (±|1|mm), -|a height of 115|mm (±|1|mm), -|a nominal voltage of 3,75|V and -|a nominal capacity of 50|Ah for use in the manufacture of rechargeable batteries for motor vehicles Roll of polymer-metal laminate comprising: -|a layer of poly(ethylene terephthalate), -|a layer of aluminium, -|a layer of polypropylene, -|with a width of not more than 275|mm, -|a total thickness of not more than 165|μm, and -|conforming to ASTM|D1701-91|and ASTM|D882-95A for use in the manufacture of lithium-ion electric vehicle batteries Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12|V, comprising: -|coil, -|magnet, -|metal membrane, -|connector, -|holder of a kind used in the manufacture of goods of Chapter 87 Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing: -|a printed circuit board, -|a connector, -|whether or not a metal holder of a kind used in the manufacture of goods of chapter 87 Electric (including electrically heated gas), laser or other light or photon beam, ultrasonic, electron beam, magnetic pulse or plasma arc soldering, brazing or welding machines and apparatus, whether or not capable of cutting; electric machines and apparatus for hot spraying of metals or cermets Machines and apparatus for resistance welding of metal Machines and apparatus for arc (including plasma arc) welding of metals For treating metals Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Holder, fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players Holder, fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players AC socket with a noise filter, composed of: -|AC socket (for power cord connection) of 230|V, -|integrated noise filter composed of capacitors and inductors, -|cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit, whether or not equipped with a metal support, which joins the AC socket to the PDP TV set Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer SCART type connectors, built into a plastic or metal housing, with 21|pins in 2|rows, for use in the manufacture of products falling within headings 8521|and 8528 AC socket with a noise filter, composed of: -|AC socket (for power cord connection) of 230|V, -|integrated noise filter composed of capacitors and inductors, -|cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit, whether or not equipped with a metal support, which joins the AC socket to the PDP TV set Socket or plug, built into a plastic or metal housing, with no more than 96|pins, for use in the manufacture of products falling within headings 8521|or 8528 High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19|pins or 20|pins in 2|rows, for use in the manufacture of products falling within headings 8521|or 8528 D-Subminiature (D-sub) type socket or plug, built into a plastic or metal housing, with 15|pins in 3|rows, for use in the manufacture of products falling within headings 8521|or 8528 Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of: -|a length of 50|mm or more, but not more than 120|mm, -|a width of 20|mm or more but not more than 40|mm, -|a height of 30|mm or more, but not more than 120|mm of a kind used|in the manufacture of goods of Chapter 87 Electronic control unit BCM (Body Control Module) comprising -|plastic box with printed circuit board and metal holder, -|with voltage of 9V or more, but not more than 16V, -|able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder of a kind used in the manufacture of goods of Chapter 87 Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Mercury or sodium vapour lamps; metal halide lamps Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300|mm|!x!|350|mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons High-frequency amplifier comprising one or more integrated circuits and discrete capacitor chips on a metal flange in a housing Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Extension two-core cable with two connectors, containing at least: -|a rubber grommet, -|a plastic conduit, -|a metal attachment bracket of a kind used to connect vehicle speed sensors in the manufacture of vehicles of chapter 87 Extension two-core cable with two connectors, containing at least: -|a rubber grommet, -|a plastic conduit, -|a metal attachment bracket of a kind used to connect vehicle speed sensors in the manufacture of vehicles of chapter 87 Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading|8546; electrical conduit tubing and joints therefor, of base metal lined with insulating material Insulated fitting of ceramics, containing by weight 90|% or more of aluminium oxide, metallised, in the form of a hollow cylindrical body of an external diameter of 20|mm or more but not more than 250|mm, for the manufacture of vacuum interrupters Spent lithium-ion or nickel metal hydride electric accumulators Upper strut insulator containing -|a metal holder with three mounting screws, and -|a rubber bump of a kind used in the manufacture of goods of Chapter 87 Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 87 Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87 Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Front passenger airbag composed of: -|a metal housing with at least six mounting brackets, -|an embedded safety cushion, -|a cartridge filled with compressed gas of a kind used in the manufacture of goods of Chapter 87 Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528 Of base metal Red, blue or green laser module -|consisting of one or more laser diodes on a metal submount with optical elements and electric connectors in a hermetic housing, -|with or without mirrors or a Periodically Poled Lithium Niobate (PPLN) crystal, -|with an optical output power of 1W or more but not more than 50W, -|only capable of emitting central wavelengths within an exact range depending on the colour: Red: 600|nm or more but not more than 665|nm; Green: 515|nm or more but not more than 560|nm; Blue: 435|nm or more but not more than 475|nm, -|and operational in two or more closely spaced wavelength bins mutually parted by 1nm or more but not more than 5nm Tubular metal needles and needles for sutures Tubular metal needles Panels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a glass plate with a matrix of thin-film transistors, covered with a film of amorphous silicon, coated with a scintillator layer of caesium iodide and a metallised protective layer, or coated with a layer of amorphous selenium Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics) Machines and appliances for testing metals Spiral or metal diaphragm type pressure gauges Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing Gyroscopic sensor for measuring lateral acceleration of the vehicle vertical axis comprising -|a piezoelectric crystal for generating an electrical potential during deformation and -|a plastic box with metal holder of a kind used in the manufacture of goods of Chapter 87 Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer Wristwatches, pocket-watches and other watches, including stopwatches, with case of precious metal or of metal clad with precious metal Cases of precious metal or of metal clad with precious metal Cases of base metal, whether or not gold- or silver-plated Of precious metal or of metal clad with precious metal Of precious metal Of metal clad with precious metal Of base metal, whether or not gold- or silver-plated Keyboard pipe organs; harmoniums and similar keyboard instruments with free metal reeds Other seats, with metal frames Other metal furniture Of metal Of base metal, for use in civil aircraft Of base metal, for use in civil aircraft Illuminated signs, illuminated name-plates and the like, of base metal, for use in civil aircraft Parts of the articles of subheading 9405|10|or 9405|60, of base metal, for use in civil aircraft Die-cast miniature models of metal Of base metal, not covered with textile material Fitted with chain scoops of base metal Of base metal, including narrow strips mounted with chain scoops of base metal Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers Of man-made fibres, measuring less than 30|mm in width, permanently put in plastic or metal cartridges of a kind used in automatic typewriters, automatic data-processing equipment and other machines ******************************************************** 1240-bartholomeusbook-16_full-text.txt ******************************************************** metallis. The Ae ∣ gyptians haue the third. Other be found in metall or oare of brasse, but ******************************************************** 1240-bartholomeusbook-10_full-text.txt ******************************************************** ******************************************************** 1240-bartholomeus-anglicus_index.txt ******************************************************** Book 16 De lapidibus et metallis On rocks, gems and minerals ******************************************************** 1728-Cyclopaedia-Tree_of_Knowledge_extract-index.txt ******************************************************** ******************************************************** 350-gaius-julius_polyhistor_translation-preface.txt ******************************************************** whereof (for the hatred they beare to golde,) doo bye vp this kynde of metall, and ******************************************************** 1751-diderot-et-d_alembert_extract-index.txt ******************************************************** ******************************************************** 2016-amazon_extract-index.txt ******************************************************** ******************************************************** 1728-1783_article-on-design-in-the-cyclopaedia.txt ******************************************************** ******************************************************** 1964-marshall-mcluhan_understanding-media_full-text.txt ******************************************************** hides, bullion, and metals, and has ended as paper. The term metallic currencies advanced the mining of metals. conferred by precious metals. His ridicule of the money medium took and by moving from metallic to paper currencies. Today, electric or clay into bricks or plates, or metal into pipe. In terms of this kind of soldiers during the seventeenth century freed some metal supplies industries of gas, coal, oil, and metallic ores. The large changes in ******************************************************** 1240-bartholomeusbook-19_full-text.txt ******************************************************** of Rosset. These three are priuate coulours, which to make holde vponmetall, is the olde arte of lymning, prouided that the Ros∣set which is of late metal ∣ lis cap. de Vitro. ******************************************************** 350-gaius-julius-solinus_index.txt ******************************************************** ******************************************************** 1932-abbot_great-inventions_index.txt ********************************************************