LIVE ANIMALS
Live horses, asses, mules and hinnies
Horses
Pure-bred breeding animals
Other
For slaughter
Other
Asses
Other
Live bovine animals
Cattle
Pure-bred breeding animals
Heifers (female bovines that have never calved)
Cows
Other
Other
Of the sub-genus Bibos or of the sub-genus Poephagus
Other
Of a weight not exceeding 80|kg
Young male bovine animals, intended for fattening
Heifers of the grey, brown or yellow mountain breeds and spotted Pinzgau breed, other than for slaughter
Heifers of the Schwyz and Fribourg breeds, other than for slaughter
Heifers of the spotted Simmental breed, other than for slaughter
Bulls of the Schwyz, Fribourg and spotted Simmental breeds, other than for slaughter
Other
Of a weight exceeding 80|kg but not exceeding 160|kg
For slaughter
Other
Young male bovine animals, intended for fattening
Heifers of the grey, brown or yellow mountain breeds and spotted Pinzgau breed
Heifers of the Schwyz and Fribourg breeds
Heifers of the spotted Simmental breed
Bulls of the Schwyz, Fribourg and spotted Simmental breeds
Other
Of a weight exceeding 160|kg but not exceeding 300|kg
For slaughter
Other
Young male bovine animals, intended for fattening
Heifers and cows of the grey, brown or yellow mountain breeds and spotted Pinzgau breed
Heifers and cows of the Schwyz and Fribourg breeds
Heifers and cows of the spotted Simmental breed
Bulls of the Schwyz, Fribourg and spotted Simmental breeds
Other
Of a weight exceeding 300|kg
Heifers (female bovines that have never calved)
For slaughter
Not yet having any permanent teeth, of a weight of not less than 320|kg but not more than 470|kg
Other
Other
Heifers of the grey, brown or yellow mountain breeds and spotted Pinzgau breed
Not yet having any permanent teeth, of a weight of not less than 320|kg but not more than 470|kg
Other
Of the Schwyz and Fribourg breeds
Not yet having any permanent teeth, of a weight of not less than 320|kg but not more than 470|kg
Other
Of the spotted Simmental breed
Not yet having any permanent teeth, of a weight of not less than 320|kg but not more than 470|kg
Other
Other
Not yet having any permanent teeth, of a weight of not less than 320|kg but not more than 470|kg
Other
Cows
For slaughter
Other
Heifers of the grey, brown or yellow mountain breeds and spotted Pinzgau breed
Of the Schwyz and Fribourg breeds
Of the spotted Simmental breed
Other
Other
For slaughter
Not yet having any permanent teeth, of a weight of not less than 350|kg but not more than 500|kg
Other
Other
Bulls of the Schwyz, Fribourg and spotted Simmental breeds
Not yet having any permanent teeth, of a weight of not less than 350 kg but not more than 500 kg
Other
Other
Not yet having any permanent teeth, of a weight of not less than 350|kg but not more than 500|kg
Other
Buffalo
Pure-bred breeding animals
Other
Domestic species
Of a weight exceeding 160 kg
Other
Other
Other
Pure-bred breeding animals
Other
Domestic species
Of a weight exceeding 160 kg
Other
Other
Live swine
Pure-bred breeding animals
Other
Weighing less than 50|kg
Domestic species
Other
Weighing 50|kg or more
Domestic species
Sows having farrowed at least once, of a weight of not less than 160|kg
Other
Other
Live sheep and goats
Sheep
Pure-bred breeding animals
Other
Lambs (up to a year old)
Other
Goats
Pure-bred breeding animals
Other
Live poultry, that is to say, fowls of the species Gallus domesticus, ducks, geese, turkeys and guinea fowls
Weighing not more than 185|g
Fowls of the species Gallus domesticus
Grandparent and parent female chicks
Laying stocks
Other
Other
Laying stocks
Other
Turkeys
Ducks
Geese
Guinea fowls
Other
Fowls of the species Gallus domesticus
Other
Ducks
Geese
Turkeys
Guinea fowls
Other live animals
Mammals
Primates
Whales, dolphins and porpoises (mammals of the order Cetacea); manatees and dugongs (mammals of the order Sirenia); seals, sea lions and walruses (mammals of the suborder Pinnipedia)
Camels and other camelids (Camelidae)
Rabbits and hares
Domestic rabbits
Other
Other
Reptiles (including snakes and turtles)
Birds
Birds of prey
Psittaciformes (including parrots, parakeets, macaws and cockatoos)
Ostriches; emus (Dromaius novaehollandiae)
Other
Pigeons
Other
Insects
Bees
Other
Other
MEAT AND EDIBLE MEAT OFFAL
Meat of bovine animals, fresh or chilled
Carcases and half-carcases
High quality beef and veal
Other
Carcases of a weight of 180|kg or more but not exceeding 300|kg and half-carcases, of a weight of 90|kg or more but not exceeding 150|kg, with a low degree of ossification of the cartilages (in particular those of the symphysis pubis and the vertebral apophyses), the meat of which is a light pink colour and the fat of which, of extremely fine structure, is white to light yellow in colour
Other
Other cuts with bone in
'Compensated' quarters
High quality beef and veal
Other
"Compensated" quarters, of a weight of 90|kg or more but not exceeding 150|kg, with a low degree of ossification of the cartilages (in particular those of the symphysis pubis and the vertebral apophyses), the meat of which is a light pink colour and the fat of which, of extremely fine structure, is white to light yellow in colour
Other
Unseparated or separated forequarters
High quality beef and veal
Other
Separated forequarters of a weight of 45|kg or more but not exceeding|75|kg, with a low degree of ossification of the cartilages (in particular those of the vertebral apophyses), the meat of which is a light pink colour and the fat of which, of extremely fine structure, is white to light yellow in colour
Other
Unseparated or separated hindquarters
High quality beef and veal
Other
Separated hindquarters of a weight of 45|kg or more but not exceeding 75|kg (38|kg or more but not exceeding 68|kg in the case of "Pistola" cuts), with a low degree of ossification of the cartilages (more especially those of the vertebral apophyses), the meat of which is a light pink colour and the fat of which, of extremely fine structure, is white to light yellow in colour
Other
Other
High quality beef and veal
Other
Boneless
High quality
Other
Buffalo meat
Other
Meat of bovine animals, frozen
Carcases and half-carcases
High quality beef and veal
Other
Other cuts with bone in
'Compensated' quarters
High quality beef and veal
Other
Unseparated or separated forequarters
High quality beef and veal
Other
Intended for processing
For the manufacture of products falling within subheadings 1602 10, 1602 50 31 or 1602 50 95, not containing meat other than that of animals of the bovine species, with a collagen/protein ratio of no more than 0,45 and containing by weight at least 20% of lean meat (excluding offal and fat) with meat and jelly accounting for at least 85% of the total net weight; the products must be subjected to a heat treatment sufficient to ensure the coagulation of meat proteins in the whole of the product and which therefore shows no traces of a pinkish liquid on the cut surface when the product is cut along a line passing through its thickest part (A-products)
for the manufacture of products other than those falling within subheadings ex 0210 20, 0210 99 51, 0210 99 90, 1602 50 10 and 1602 90 61 (B-products)
Other
Other
Unseparated or separated hindquarters
High quality beef and veal
Other
Other
High quality beef and veal
Other
Boneless
Forequarters, whole or cut into a maximum of five pieces, each quarter being in a single block; 'compensated' quarters in two blocks, one of which contains the forequarter, whole or cut into a maximum of five pieces, and the other, the hindquarter, excluding the tenderloin, in one piece
High quality beef and veal
Other
Intended for processing
For the manufacture of products falling within subheadings 1602 10, 1602 50 31 or 1602 50 95, not containing meat other than that of animals of the bovine species, with a collagen/protein ratio of no more than 0,45 and containing by weight at least 20% of lean meat (excluding offal and fat) with meat and jelly accounting for at least 85% of the total net weight; the products must be subjected to a heat treatment sufficient to ensure the coagulation of meat proteins in the whole of the product and which therefore shows no traces of a pinkish liquid on the cut surface when the product is cut along a line passing through its thickest part (A-products)
For the manufacture of products other than those falling within subheadings ex 0210 20, 0210 99 51, 0210 99 90, 1602 50 10 and 1602 90 61 (B-products)
Other
Other
Crop, chuck-and-blade and brisket cuts
High quality beef and veal
Other
Intended for processing
For the manufacture of products falling within subheadings 1602 10, 1602 50 31 or 1602 50 95, not containing meat other than that of animals of the bovine species, with a collagen/protein ratio of no more than 0,45 and containing by weight at least 20% of lean meat (excluding offal and fat) with meat and jelly accounting for at least 85% of the total net weight; the products must be subjected to a heat treatment sufficient to ensure the coagulation of meat proteins in the whole of the product and which therefore shows no traces of a pinkish liquid on the cut surface when the product is cut along a line passing through its thickest part (A-products)
For the manufacture of products other than those falling within subheadings ex 0210 20, 0210 99 51, 0210 99 90, 1602 50 10 and 1602 90 61 (B-products)
Other
Other
Other
High quality
Other
Buffalo meat
Intended for processing
For the manufacture of products falling within subheadings 1602 10, 1602 50 31 or 1602 50 95, not containing meat other than that of animals of the bovine species, with a collagen/protein ratio of no more than 0,45 and containing by weight at least 20% of lean meat (excluding offal and fat) with meat and jelly accounting for at least 85% of the total net weight; the products must be subjected to a heat treatment sufficient to ensure the coagulation of meat proteins in the whole of the product and which therefore shows no traces of a pinkish liquid on the cut surface when the product is cut along a line passing through its thickest part (A-products)
For the manufacture of products other than those falling within subheadings ex 0210 20, 0210 99 51, 0210 99 90, 1602 50 10 and 1602 90 61 (B-products)
Other
Other
Other
Intended for processing
For the manufacture of products falling within subheadings 1602 10, 1602 50 31 or 1602 50 95, not containing meat other than that of animals of the bovine species, with a collagen/protein ratio of no more than 0,45 and containing by weight at least 20% of lean meat (excluding offal and fat) with meat and jelly accounting for at least 85% of the total net weight; the products must be subjected to a heat treatment sufficient to ensure the coagulation of meat proteins in the whole of the product and which therefore shows no traces of a pinkish liquid on the cut surface when the product is cut along a line passing through its thickest part (A-products)
For the manufacture of products other than those falling within subheadings ex 0210 20, 0210 99 51, 0210 99 90, 1602 50 10 and 1602 90 61 (B-products)
Other
Other
Meat of swine, fresh, chilled or frozen
Fresh or chilled
Carcases and half-carcases
Of domestic swine
Other
Hams, shoulders and cuts thereof, with bone in
Of domestic swine
Hams and cuts thereof
Shoulders and cuts thereof
Other
Other
Of domestic swine
Fore-ends and cuts thereof
Loins and cuts thereof, with bone in
Bellies (streaky) and cuts thereof
Other
Boneless
Tenderloin, presented separately
Loins and cuts thereof, excluding tenderloin presented separately
Loins
Cuts
Hams
Other
Other
Other
Frozen
Carcases and half-carcases
Of domestic swine
Other
Hams, shoulders and cuts thereof, with bone in
Of domestic swine
Hams and cuts thereof
Shoulders and cuts thereof
Other
Other
Of domestic swine
Fore-ends and cuts thereof
Loins and cuts thereof, with bone in
Bellies (streaky) and cuts thereof
Other
Boneless
Loins and cuts thereof, excluding tenderloin presented separately
Loins
Cuts
Other
Tenderloin, presented separately
Hams
Other
Other
Other
Meat of sheep or goats, fresh, chilled or frozen
Carcases and half-carcases of lamb, fresh or chilled
Of domestic lamb
Other
Other meat of sheep, fresh or chilled
Carcases and half-carcases
Of domestic sheep
Other
Other cuts with bone in
Short forequarters
Of domestic sheep
Other
Chines and/or best ends
Of domestic sheep
Other
Legs
Of domestic sheep
Other
Other
Of domestic sheep
Other
Boneless
Of domestic sheep
Of lamb
Other
Other
Of lamb
Other
Carcases and half-carcases of lamb, frozen
Of domestic lamb
Other
Other meat of sheep, frozen
Carcases and half-carcases
Of domestic sheep
Other
Other cuts with bone in
Short forequarters
Of domestic sheep
Other
Chines and/or best ends
Of domestic sheep
Other
Legs
Of domestic sheep
Other
Other
Of domestic sheep
Other
Boneless
Of lamb
Of domestic sheep
Other
Other
Of domestic sheep
Other
Meat of goats
Fresh or chilled
Carcases and half-carcases
Short forequarters
Chines and/or best ends
Legs
Other
Cuts with bone in
Boneless cuts
Goatmeat of kid
Other
Frozen
Carcases and half-carcases
Short forequarters
Chines and/or best ends
Legs
Other
Cuts with bone in
Boneless cuts
Goatmeat of kid
Other
Meat of horses, asses, mules or hinnies, fresh, chilled or frozen
Fresh or chilled
Frozen
Edible offal of bovine animals, swine, sheep, goats, horses, asses, mules or hinnies, fresh, chilled or frozen
Of bovine animals, fresh or chilled
For the manufacture of pharmaceutical products
Other
Thick skirt and thin skirt
Of high quality
Other
Other
Of bovine animals, frozen
Tongues
Livers
Other
For the manufacture of pharmaceutical products
Other
Thick skirt and thin skirt
Of high quality
Thin skirt, whole
Other
Other
Thin skirt, whole
Intended for processing
For the manufacture of products falling within subheadings 1602 10, 1602 50 31 or 1602 50 95, not containing meat other than that of animals of the bovine species, with a collagen/protein ratio of no more than 0,45 and containing by weight at least 20% of lean meat (excluding offal and fat) with meat and jelly accounting for at least 85% of the total net weight; the products must be subjected to a heat treatment sufficient to ensure the coagulation of meat proteins in the whole of the product and which therefore shows no traces of a pinkish liquid on the cut surface when the product is cut along a line passing through its thickest part (A-products)
For the manufacture of products other than those falling within subheadings ex 0210 20, 0210 99 51, 0210 99 90, 1602 50 10 and 1602 90 61 (B-products)
Other
Other
Other
Intended for processing
For the manufacture of products falling within subheadings 1602 10, 1602 50 31 or 1602 50 95, not containing meat other than that of animals of the bovine species, with a collagen/protein ratio of no more than 0,45 and containing by weight at least 20% of lean meat (excluding offal and fat) with meat and jelly accounting for at least 85% of the total net weight; the products must be subjected to a heat treatment sufficient to ensure the coagulation of meat proteins in the whole of the product and which therefore shows no traces of a pinkish liquid on the cut surface when the product is cut along a line passing through its thickest part (A-products)
For the manufacture of other products than products falling within subheadings ex 0210 20, 0210 99 51, 0210 99 90, 1602 50 10 and 1602 90 61 (B-products)
Other
Other
Other
Of swine, fresh or chilled
Of domestic swine
Other
Of swine, frozen
Livers
Of domestic swine
Other
Other
Other, fresh or chilled
For the manufacture of pharmaceutical products
Other
Of horses, asses, mules and hinnies
Of sheep and goats
Other, frozen
For the manufacture of pharmaceutical products
Other
Of horses, asses, mules and hinnies
Of sheep and goats
Meat and edible offal, of the poultry of heading|0105, fresh, chilled or frozen
Of fowls of the species Gallus domesticus
Not cut in pieces, fresh or chilled
Plucked and gutted, with heads and feet, known as '83|%|chickens'
Plucked and drawn, without heads and feet but with necks, hearts, livers and gizzards, known as '70|%|chickens'
Plucked and drawn, without heads and feet and without necks, hearts, livers and gizzards, known as '65|%|chickens', or otherwise presented
Not cut in pieces, frozen
Plucked and drawn, without heads and feet but with necks, hearts, livers and gizzards, known as '70|%|chickens'
Plucked and drawn, without heads and feet and without necks, hearts, livers and gizzards, known as '65|%|chickens', or otherwise presented
Cuts and offal, fresh or chilled
Cuts
Boneless
With bone in
Halves or quarters
Whole wings, with or without tips
Backs, necks, backs with necks attached, rumps and wing-tips
Breasts and cuts thereof
Legs and cuts thereof
Other
Offal
Livers
Other
Cuts and offal, frozen
Cuts
Boneless
With bone in
Halves or quarters
Whole wings, with or without tips
Backs, necks, backs with necks attached, rumps and wing-tips
Breasts and cuts thereof
Legs and cuts thereof
Other
Offal
Livers
Other
Of turkeys
Not cut in pieces, fresh or chilled
Plucked and drawn, without heads and feet but with necks, hearts, livers and gizzards, known as '80|%|turkeys'
Plucked and drawn, without heads and feet and without necks, hearts, livers and gizzards, known as '73|%|turkeys', or otherwise presented
Not cut in pieces, frozen
Plucked and drawn, without heads and feet but with necks, hearts, livers and gizzards, known as '80|%|turkeys'
Plucked and drawn, without heads and feet and without necks, hearts, livers and gizzards, known as '73|%|turkeys', or otherwise presented
Cuts and offal, fresh or chilled
Cuts
Boneless
With bone in
Halves or quarters
Whole wings, with or without tips
Backs, necks, backs with necks attached, rumps and wing-tips
Breasts and cuts thereof
Legs and cuts thereof
Drumsticks and cuts of drumsticks
Other
Other
Offal
Livers
Other
Cuts and offal, frozen
Cuts
Boneless
With bone in
Halves or quarters
Whole wings, with or without tips
Backs, necks, backs with necks attached, rumps and wing-tips
Breasts and cuts thereof
Legs and cuts thereof
Drumsticks and cuts thereof
Other
Other
Offal
Livers
Other
Of ducks
Not cut in pieces, fresh or chilled
Plucked, bled, gutted but not drawn, with heads and feet, known as '85|%|ducks'
Plucked and drawn, without heads and feet but with necks, hearts, livers and gizzards, known as '70|%|ducks'
Plucked and drawn, without heads and feet and without necks, hearts, livers and gizzards, known as '63|%|ducks', or otherwise presented
Not cut in pieces, frozen
Plucked and drawn, without heads and feet but with necks, hearts, livers and gizzards, known as '70|%|ducks'
Plucked and drawn, without heads and feet and without necks, hearts, livers and gizzards, known as '63|%|ducks', or otherwise presented
Fatty livers, fresh or chilled
Other, fresh or chilled
Cuts
Boneless
With bone in
Halves or quarters
Whole wings, with or without tips
Backs, necks, backs with necks attached, rumps and wing-tips
Breasts and cuts thereof
Legs and cuts thereof
Paletots
Other
Offal
Livers, other than fatty livers
Other
Other, frozen
Cuts
Boneless
With bone in
Halves or quarters
Whole wings, with or without tips
Backs, necks, backs with necks attached, rumps and wing-tips
Breasts and cuts thereof
Legs and cuts thereof
Paletots
Other
Offal
Livers
Fatty livers
Other
Other
Of geese
Not cut in pieces, fresh or chilled
Plucked, bled, not drawn, with heads and feet, known as '82|%|geese'
Plucked and drawn, without heads and feet, with or without hearts and gizzards, known as '75|%|geese', or otherwise presented
Not cut in pieces, frozen
Plucked, bled, not drawn, with heads and feet, known as '82|%|geese'
Plucked and drawn, without heads and feet, with or without hearts and gizzards, known as '75|%|geese', or otherwise presented
Fatty livers, fresh or chilled
Other, fresh or chilled
Cuts
Boneless
With bone in
Halves or quarters
Whole wings, with or without tips
Backs, necks, backs with necks attached, rumps and wing-tips
Breasts and cuts thereof
Legs and cuts thereof
Paletots
Other
Offal
Livers, other than fatty livers
Other
Other, frozen
Cuts
Boneless
With bone in
Halves or quarters
Whole wings, with or without tips
Backs, necks, backs with necks attached, rumps and wing-tips
Breasts and cuts thereof
Legs and cuts thereof
Paletots
Other
Offal
Livers
Fatty livers
Other
Other
Of guinea fowls
Not cut in pieces, fresh, chilled or frozen
fresh or chilled
frozen
Other, fresh, chilled or frozen
Cuts
Boneless
With bone in
Halves or quarters
Fresh or chilled
Other
Whole wings, with or without tips
Backs, necks, backs with necks attached, rumps and wing-tips
Breasts and cuts thereof
Legs and cuts thereof
Other
Offal
Livers
Fresh or chilled
Other
Other
Other meat and edible meat offal, fresh, chilled or frozen
Of rabbits or hares
Of domestic rabbits
Other
Of primates
Of whales, dolphins and porpoises (mammals of the order Cetacea); of manatees and dugongs (mammals of the order Sirenia); of seals, sea lions and walruses (mammals of the suborder Pinnipedia)
Whale meat
Seal meat
Other
Of reptiles (including snakes and turtles)
Of camels and other camelids (Camelidae)
Other
Of domestic pigeons
Of game, other than of rabbits or hares
Of reindeer
Frozen
Other
Frogs' legs
Other
Pig fat, free of lean meat, and poultry fat, not rendered or otherwise extracted, fresh, chilled, frozen, salted, in brine, dried or smoked
Of pigs
Subcutaneous pig fat
Fresh, chilled, frozen, salted or in brine
Dried or smoked
Pig fat, other than that of subheading|0209|10|11|or 0209|10|19
Other
Meat and edible meat offal, salted, in brine, dried or smoked; edible flours and meals of meat or meat offal
Meat of swine
Hams, shoulders and cuts thereof, with bone in
Of domestic swine
Salted or in brine
Hams and cuts thereof
Shoulders and cuts thereof
Dried or smoked
Hams and cuts thereof
Shoulders and cuts thereof
Other
Bellies (streaky) and cuts thereof
Of domestic swine
Salted or in brine
Dried or smoked
Other
Other
Of domestic swine
Salted or in brine
Bacon sides or spencers
Three-quarter sides or middles
Fore-ends and cuts thereof
Loins and cuts thereof
Other
Hams, in brine, enclosed in a bladder or in an artificial gut
Other
Dried or smoked
Fore-ends and cuts thereof
Loins and cuts thereof
Other
Boneless
Chop, smoked
Pork neck, dried in air, seasoned or not, whole, in pieces or thinly sliced
Other
Other
Other
Meat of bovine animals
With bone in
Boneless
Cuts of meat from haunches of bovine animals aged at least 18 months, with no visible intramuscular fat (3 to 7 %) and a pH of the fresh meat between 5.4 and 6.0; salted, seasoned, pressed, dried only in fresh dry air and developing noble mould (bloom of microscopic fungi); the weight of the finished product is between 41|% and 53|% of the raw material before salting
Other
Other, including edible flours and meals of meat or meat offal
Of primates
Of whales, dolphins and porpoises (mammals of the order Cetacea); of manatees and dugongs (mammals of the order Sirenia); of seals, sea lions and walruses (mammals of the suborder Pinnipedia)
Of whales, dolphins and porpoises (mammals of the order Cetacea); of manatees and dugongs (mammals of the order Sirenia)
Other
Meat
Offal
Edible flours and meals of meat or meat offal
Of reptiles (including snakes and turtles)
Other
Meat
Of horses, salted, in brine or dried
Of sheep and goats
With bone in
Boneless
Of lamb
Other
Of reindeer
Other
Poultrymeat, salted or in brine, of heading 0207
Other
Offal
Of domestic swine
Livers
Other
Of bovine animals
Thick skirt and thin skirt
Other
Other
Poultry liver
Fatty livers of geese or ducks, salted or in brine
Other
Other
Of sheep and goats
Other
Edible flours and meals of meat or meat offal
Of domestic swine and bovine animals
Other
FISH AND CRUSTACEANS, MOLLUSCS AND OTHER AQUATIC INVERTEBRATES
Live fish
Ornamental fish
Freshwater fish
Other
Other live fish
Trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster)
Of the species Oncorhynchus apache or Oncorhynchus chrysogaster
Other
Of the species Oncorhynchus mykiss
Weighing 1.2 kg or less each
Other
Other
Eels (Anguilla spp.)
Of a length of less than 12|cm
Of a length of 12|cm or more but less than 20|cm
Of a length of 20|cm or more
Carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys spp., Cirrhinus spp., Mylopharyngodon piceus)
Atlantic and Pacific bluefin tuna (Thunnus thynnus, Thunnus orientalis)
Atlantic bluefin tuna (Thunnus thynnus)
Pacific bluefin tuna (Thunnus orientalis)
Southern bluefin tuna (Thunnus maccoyii)
Other
Freshwater fish
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Atlantic salmon (Salmo salar)
Other
Other
Other
Sharks (Squalus|spp.)
European sea bass (Dicentrarchus labrax)
Porbeagle shark (Lamna nasus)
Lesser or Greenland halibut (Reinhardtius hippoglossoides)
Atlantic halibut (Hippoglossus hippoglossus)
Gilt-head sea bream (Sparus aurata)
Swordfish (Xiphias gladius)
Bigeye tuna (Thunnus obesus)
Sea bream (Dentex dentex, Pagellus|spp.)
Other
Fish, fresh or chilled, excluding fish fillets and other fish meat of heading|0304
Salmonidae, excluding livers and roes
Trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster)
Of the species Oncorhynchus apache or Oncorhynchus chrysogaster
Of the species Oncorhynchus mykiss, with heads and gills on, gutted, weighing more than 1,2|kg each, or with heads off, gilled and gutted, weighing more than 1|kg each
Other
Of the species Oncorhynchus mykiss
In the form of whole fish (with heads on), whether or not gilled, whether or not gutted, weighing 1,2 kg or less each; with heads off, whether or not gilled, whether or not gutted, weighing 1 kg or less each
Other
Other
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus)
Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Atlantic salmon (Salmo salar)
Danube salmon (Hucho hucho)
Other
Flat fish (Pleuronectidae, Bothidae, Cynoglossidae, Soleidae, Scophthalmidae and Citharidae), excluding livers and roes
Halibut (Reinhardtius hippoglossoides, Hippoglossus hippoglossus, Hippoglossus stenolepis)
Lesser or Greenland halibut (Reinhardtius hippoglossoides)
Atlantic halibut (Hippoglossus hippoglossus)
Pacific halibut (Hippoglossus stenolepis)
Plaice (Pleuronectes platessa)
Sole (Solea spp.)
Turbot (Psetta maxima)
Other
Megrim (Lepidorhombus spp.)
Other
Tuna (of the genus Thunnus), skipjack or stripe-bellied bonito (Euthynnus (Katsuwonus) pelamis), excluding livers and roes
Albacore or longfinned tuna (Thunnus alalunga)
For the industrial manufacture of products of heading|1604
Other
Yellowfin tuna (Thunnus albacares)
For the industrial manufacture of products of heading|1604
Other
Skipjack or stripe-bellied bonito
For the industrial manufacture of products of heading|1604
Other
Bigeye tuna (Thunnus obesus)
For the industrial manufacture of products of heading|1604
Other
Atlantic and Pacific bluefin tuna (Thunnus thynnus, Thunnus orientalis)
Atlantic bluefin tuna (Thunnus thynnus)
For the industrial manufacture of products of heading|1604
Other
Pacific bluefin tuna (Thunnus orientalis)
For the industrial manufacture of products of heading|1604
Other
Southern bluefin tuna (Thunnus maccoyii)
For the industrial manufacture of products of heading|1604
Other
Other
For the industrial manufacture of products of heading|1604
Other
Herring (Clupea harengus, Clupea pallasii), anchovies (Engraulis spp.), sardines (Sardina pilchardus, Sardinops spp.), sardinella (Sardinella spp.), brisling or sprats (Sprattus sprattus), mackerel (Scomber scombrus, Scomber australasicus, Scomber japonicus), jack and horse mackerel (Trachurus spp.), cobia (Rachycentron canadum) and swordfish (Xiphias gladius), excluding livers and roes
Herring (Clupea harengus, Clupea pallasii)
Of a weight exceeding 100|g per piece, for processing
Other
Anchovies (Engraulis spp.)
Sardines (Sardina pilchardus, Sardinops spp.), sardinella (Sardinella spp.), brisling or sprats (Sprattus sprattus)
Sardines of the species Sardina pilchardus
Sardines of the genus Sardinops; sardinella (Sardinella spp.)
Brisling or sprats (Sprattus sprattus)
Mackerel (Scomber scombrus, Scomber australasicus, Scomber japonicus)
Mackerel (Scomber scombrus)
Other
Jack and horse mackerel (Trachurus spp.)
Atlantic horse mackerel (Trachurus trachurus)
Chilean jack mackerel (Trachurus murphyi)
Other
Horse mackerel (scad) (Caranx trachurus)
Other
Cobia (Rachycentron canadum)
Swordfish (Xiphias gladius)
Fish of the families Bregmacerotidae, Euclichthyidae, Gadidae, Macrouridae, Melanonidae, Merlucciidae, Moridae and Muraenolepididae, excluding livers and roes
Cod (Gadus morhua, Gadus ogac, Gadus macrocephalus)
Of the species Gadus morhua
For processing
Other
Other
For industrial manufacture
Other
Haddock (Melanogrammus aeglefinus)
With heads off, gilled and gutted, for processing
Other
Coalfish (Pollachius virens)
Hake (Merluccius spp., Urophycis spp.)
Hake of the genus Merluccius
Cape hake (shallow-water hake) (Merluccius capensis) and deepwater hake (deepwater Cape hake) (Merluccius paradoxus)
Southern hake (Merluccius australis)
Other
Silver hake (Merluccius bilinearis)
Hake of the species Merluccius merluccius
Other
Hake of the genus Urophycis
Alaska pollack (Theragra chalcogramma)
Blue whiting (Micromesistius poutassou, Micromesistius australis)
Blue whiting (Micromesistius poutassou)
Southern blue whiting (Micromesistius australis)
Other
Fish of the species Boreogadus saida
For processing
Other
Whiting (Merlangius merlangus)
Pollack (Pollachius pollachius)
Ling (Molva spp.)
Other
Tilapia (Oreochromis spp.), catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.), carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys spp., Cirrhinus spp., Mylopharyngodon piceus), eels (Anguilla spp.), Nile perch (Lates niloticus) and snakeheads (Channa spp.), excluding livers and roes
Tilapia (Oreochromis spp.)
Catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.)
Carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys spp., Cirrhinus spp., Mylopharyngodon piceus)
Eels (Anguilla spp.)
Other
Other fish, excluding livers and roes
Dogfish and other sharks
Dogfish of the species Squalus acanthias
Dogfish of the species Scyliorhinus spp.
Porbeagle shark (Lamna nasus)
Other
Rays and skates (Rajidae)
Toothfish (Dissostichus spp.)
Sea bass (Dicentrarchus spp.)
European sea bass (Dicentrarchus labrax)
Other
Sea bream (Sparidae)
Of the species Dentex dentex or Pagellus spp.
Gilt-head sea bream (Sparus aurata)
Other
Other
Freshwater fish
Other
Fish of the genus Euthynnus, other than the skipjack or stripe-bellied bonito (Euthynnus (Katsuwonus) pelamis) mentioned in subheading|0302|33
For the industrial manufacture of products of heading|1604
Other
Redfish (Sebastes spp.)
Of the species Sebastes marinus
Other
Of the species Sebastes mentella
Other
Ray's bream (Brama spp.)
Monkfish (Lophius spp.)
Pink cusk-eel (Genypterus blacodes)
Other
Red snapper (Lutjanus purpureus), for processing
Fish of the species Kathetostoma giganteum
Bogue (Boops boops)
Other
Livers and roes
Of herring (Clupea harengus, Clupea pallasii)
Of salmon
Of pike
Of Atlantic bigeye tuna (Thunnus obesus)
Other
Hard roes
Other
Fish, frozen, excluding fish fillets and other fish meat of heading|0304
Salmonidae, excluding livers and roes
Sockeye salmon (red salmon) (Oncorhynchus nerka)
Other Pacific salmon (Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus)
Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Atlantic salmon (Salmo salar)
Danube salmon (Hucho hucho)
Trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster)
Of the species Oncorhynchus apache or Oncorhynchus chrysogaster
Of the species Oncorhynchus mykiss, with heads and gills on, gutted, weighing more than 1,2|kg each, or with heads off, gilled and gutted, weighing more than 1|kg each
Other
Of the species Oncorhynchus mykiss
In the form of whole fish (with heads on), whether or not gilled, whether or not gutted, weighing 1,2 kg or less each; with heads off, whether or not gilled, whether or not gutted, weighing 1 kg or less each
Other
Other
Other
Of the genus Coregone
Other
Tilapia (Oreochromis spp.), catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.), carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys spp., Cirrhinus spp., Mylopharyngodon piceus), eels (Anguilla spp.), Nile perch (Lates niloticus) and snakeheads (Channa spp.), excluding livers and roes
Tilapia (Oreochromis spp.)
Catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.)
Carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys spp., Cirrhinus spp., Mylopharyngodon piceus)
Eels (Anguilla spp.)
Other
Flat fish (Pleuronectidae, Bothidae, Cynoglossidae, Soleidae, Scophthalmidae and Citharidae), excluding livers and roes
Halibut (Reinhardtius hippoglossoides, Hippoglossus hippoglossus, Hippoglossus stenolepis)
Lesser or Greenland halibut (Reinhardtius hippoglossoides)
Atlantic halibut (Hippoglossus hippoglossus)
Pacific halibut (Hippoglossus stenolepis)
Plaice (Pleuronectes platessa)
Sole (Solea spp.)
Turbot (Psetta maxima)
Other
Flounder (Platichthys flesus)
Fish of the genus Rhombosolea
Fish of the species Pelotreis flavilatus or Peltorhamphus novaezelandiae
Other
Megrim (Lepidorhombus|spp.)
Other
Tuna (of the genus Thunnus), skipjack or stripe-bellied bonito (Euthynnus (Katsuwonus) pelamis), excluding livers and roes
Albacore or longfinned tuna (Thunnus alalunga)
For the industrial manufacture of products of heading|1604
Other
Yellowfin tuna (Thunnus albacares)
For the industrial manufacture of products of heading|1604
Whole
Weighing more than 10|kg each
Other
Other
Weighing more than 10|kg each
Other
Other
Skipjack or stripe-bellied bonito
For the industrial manufacture of products of heading|1604
Other
Bigeye tuna (Thunnus obesus)
For the industrial manufacture of products of heading|1604
Other
Atlantic and Pacific bluefin tuna (Thunnus thynnus, Thunnus orientalis)
Atlantic bluefin tuna (Thunnus thynnus)
For the industrial manufacture of products of heading|1604
Other
Pacific bluefin tuna (Thunnus orientalis)
For the industrial manufacture of products of heading|1604
Other
Southern bluefin tuna (Thunnus maccoyii)
For the industrial manufacture of products of heading|1604
Other
Other
For the industrial manufacture of products of heading 1604
Other
Herring (Clupea harengus, Clupea pallasii), sardines (Sardina pilchardus, Sardinops spp.), sardinella (Sardinella spp.), brisling or sprats (Sprattus sprattus), mackerel (Scomber scombrus, Scomber australasicus, Scomber japonicus), jack and horse mackerel (Trachurus spp.), cobia (Rachycentron canadum) and swordfish (Xiphias gladius), excluding livers and roes
Herring (Clupea harengus, Clupea pallasii)
Of a weight exceeding 100|g per piece, for processing
Other, for industrial manufacture
Other
Sardines (Sardina pilchardus, Sardinops spp.), sardinella (Sardinella spp.), brisling or sprats (Sprattus sprattus)
Sardines of the species Sardina pilchardus
Sardines of the genus Sardinops; sardinella (Sardinella spp.)
Brisling or sprats (Sprattus sprattus)
Mackerel (Scomber scombrus, Scomber australasicus, Scomber japonicus)
Of the species Scomber scombrus or Scomber japonicus
Of the species Scomber scombrus
Of the species Scomber japonicus
Of the species Scomber australasicus
Jack and horse mackerel (Trachurus spp.)
Atlantic horse mackerel (Trachurus trachurus)
Chilean jack mackerel (Trachurus murphyi)
Other
Horse mackerel (scad) (Caranx trachurus)
Other
Cobia (Rachycentron canadum)
Swordfish (Xiphias gladius)
Fish of the families Bregmacerotidae, Euclichthyidae, Gadidae, Macrouridae, Melanonidae, Merlucciidae, Moridae and Muraenolepididae, excluding livers and roes
Cod (Gadus morhua, Gadus ogac, Gadus macrocephalus)
Of the species Gadus morhua
For processing
Other
Of the species Gadus ogac
For processing
Other
Of the species Gadus macrocephalus
For processing
Other
Haddock (Melanogrammus aeglefinus)
With heads off, gilled and gutted, for processing
Other
Coalfish (Pollachius virens)
Hake (Merluccius spp., Urophycis spp.)
Hake of the genus Merluccius
Cape hake (shallow-water hake) (Merluccius capensis) and deepwater hake (deepwater Cape hake) (Merluccius paradoxus)
For processing
Other
Argentine hake (Southwest Atlantic hake) (Merluccius hubbsi)
For processing
Other
Southern hake (Merluccius australis)
For processing
Other
Other
Silver hake (Merluccius bilinearis)
For processing
Other
Hake of the species Merluccius merluccius
Other hake of the genus Merluccius
For processing
Other
Hake of the genus Urophycis
Alaska pollack (Theragra chalcogramma)
For processing
Other
Blue whiting (Micromesistius poutassou, Micromesistius australis)
Blue whiting (Micromesistius poutassou, Gadus poutassou)
Southern blue whiting (Micromesistius australis)
Other
Fish of the species Boreogadus saida
For processing
Other
Whiting (Merlangius merlangus)
Pollack (Pollachius pollachius)
Blue grenadier (Macruronus novaezelandiae)
Ling (Molva spp.)
Other
Other fish, excluding livers and roes
Dogfish and other sharks
Dogfish of the species Squalus acanthias
Dogfish of the species Scyliorhinus spp.
Porbeagle shark (Lamna nasus)
Other
Rays and skates (Rajidae)
Toothfish (Dissostichus spp.)
Sea bass (Dicentrarchus spp.)
European sea bass (Dicentrarchus labrax)
Other
Other
Freshwater fish
Other
Fish of the genus Euthynnus, other than the skipjack or stripe-bellied bonito (Euthynnus (Katsuwonus) pelamis) mentioned in subheading|0303|43
For the industrial manufacture of products of heading|1604
Other
Redfish (Sebastes spp.)
Of the species Sebastes marinus
Other
Of the species Sebastes mentella
Other
Fish of the species Orcynopsis unicolor
Anchovies (Engraulis spp.)
Engraulis anchoita and Engraulis capensis, for processing
Other
Sea bream (Dentex dentex, Pagellus spp.)
Gilt-head sea bream (Sparus aurata)
Ray's bream (Brama spp.)
Monkfish (Lophius spp.)
Pink cusk-eel (Genypterus blacodes)
For processing
Other
Other
Fish of the species Kathetostoma giganteum
Bogue (Boops boops)
Pink cusk-eel (Genypterus capensis) for processing
Other
Livers and roes
Hard and soft roes for the manufacture of deoxyribonucleic acid or protamine sulphate
Other
Of Atlantic bigeye tuna (Thunnus obesus)
Of herring (Clupea harengus, Clupea pallasii)
Other
Hard roes
Other
Fish fillets and other fish meat (whether or not minced), fresh, chilled or frozen
Fresh or chilled fillets of tilapia (Oreochromis spp.), catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.), carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys spp., Cirrhinus spp., Mylopharyngodon piceus), eels (Anguilla spp.), Nile perch (Lates niloticus) and snakeheads (Channa spp.)
Tilapia (Oreochromis spp.)
Catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.)
Pangasius (Pangasius|spp.)
Other
Nile perch (Lates niloticus)
Other
Eels (Anguilla|spp.)
Carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys|spp., Cirrhinus|spp., Mylopharyngodon piceus)
Other
Fresh or chilled fillets of other fish
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Atlantic salmon (Salmo salar)
Other
Trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster)
Of the species Oncorhynchus mykiss, weighing more than 400|g each
Of the species Oncorhynchus apache or Oncorhynchus chrysogaster
Other
Of the species Oncorhynchus mykiss
Other
Flat fish (Pleuronectidae, Bothidae, Cynoglossidae, Soleidae, Scophthalmidae and Citharidae)
Of lesser or Greenland halibut (Reinhardtius hippoglossoides) and of Atlantic halibut (Hippoglossus hippoglossus)
Other
Fish of the families Bregmacerotidae, Euclichthyidae, Gadidae, Macrouridae, Melanonidae, Merlucciidae, Moridae and Muraenolepididae
Cod (Gadus morhua, Gadus ogac, Gadus macrocephalus) and fish of the species Boreogadus saida
Of the species Gadus morhua
Other
Coalfish (Pollachius virens)
Other
Haddock (Melanogrammus aeglefinus)
Other
Swordfish (Xiphias gladius)
Toothfish (Dissostichus spp.)
Other
Freshwater fish
Other
Redfish (Sebastes spp.)
Other
Herrings
Mackerel
Bluefin tunas (Thunnus thynnus)
Atlantic bigeye tuna (Thunnus obesus)
Gilt-head sea bream (Sparus aurata)
Sea bream (Dentex dentex and Pagellus|spp.)
European sea bass (Dicentrarchus labrax)
Other
Other, fresh or chilled
Tilapia (Oreochromis spp.), catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.), carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys spp., Cirrhinus spp., Mylopharyngodon piceus), eels (Anguilla spp.), Nile perch (Lates niloticus) and snakeheads (Channa spp.)
Carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys|spp., Cirrhinus|spp., Mylopharyngodon piceus)
Other
Salmonidae
Trout of the species Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster
Other
Fish of the families Bregmacerotidae, Euclichthyidae, Gadidae, Macrouridae, Melanonidae, Merlucciidae, Moridae and Muraenolepididae
Cod (Gadus morhua, Gadus ogac, Gadus macrocephalus) and fish of the species Boreogadus saida
Of the species Gadus morhua
Other
Coalfish (Pollachius virens)
Haddock (Melanogrammus aeglefinus)
For processing
Other
Other
Swordfish (Xiphias gladius)
Toothfish (Dissostichus spp.)
Other
Freshwater fish
Other
Flaps of herring
Herring of the species Clupea harengus and Clupea pallasii, of a weight exceeding 80|g per piece, for industrial manufacture
Other
Other
Herrings
Atlantic bluefin tunas (Thunnus thynnus)
Bigeye tuna (Thunnus obesus)
Sharks (Squalus|spp.), excluding dogfish of the species Squalus acanthias
Lesser or Greenland halibut (Reinhardtius hippoglossoides)
Atlantic halibut (Hippoglossus hippoglossus)
Sea bream (Dentex dentex, Pagellus|spp.)
European sea bass (Dicentrarchus labrax)
Redfish (Sebastes|spp.)
Bogue (Boops boops)
Porbeagle shark (Lamna nasus)
Gilt-head sea bream (Sparus aurata)
Other
Frozen fillets of tilapia (Oreochromis spp.), catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.), carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys spp., Cirrhinus spp., Mylopharyngodon piceus), eels (Anguilla spp.), Nile perch (Lates niloticus) and snakeheads (Channa spp.)
Tilapia (Oreochromis spp.)
Catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.)
Nile perch (Lates niloticus)
Other
Eels (Anguilla|spp.)
Carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys|spp., Cirrhinus|spp., Mylopharyngodon piceus)
Other
Frozen fillets of fish of the families Bregmacerotidae, Euclichthyidae, Gadidae, Macrouridae, Melanonidae, Merlucciidae, Moridae and Muraenolepididae
Cod (Gadus morhua, Gadus ogac, Gadus macrocephalus)
Cod of the species Gadus macrocephalus
For processing
Other
Other
Cod of the species Gadus morhua
For processing
Other
Cod of the species Gadus ogac
Haddock (Melanogrammus aeglefinus)
Coalfish (Pollachius virens)
Hake (Merluccius spp., Urophycis spp.)
Hake of the genus Merluccius
Cape hake (shallow-water hake) (Merluccius capensis) and deepwater hake (deepwater Cape hake) (Merluccius paradoxus)
Argentine hake (Southwest Atlantic hake) (Merluccius hubbsi)
Other
North Pacific hake (Merluccius productus), for processing
Other
Hake of the genus Urophycis
Alaska pollack (Theragra chalcogramma)
for processing
Other
Other
Fish of the species Boreogadus saida
Whiting (Merlangius merlangus)
Blue grenadier (Macruronus novaezelandiae)
For processing
Other
Ling (Molva spp.)
Other
Fish of the genus Macruronus, other than blue grenadier (Macruronus novaezealandiae) mentioned in subheading 0304|79|50
Patagonian grenadier (Macruronus magellanicus)
For processing
Other
Other
For processing
Other
Other
Frozen fillets of other fish
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Atlantic salmon (Salmo salar)
Other
Trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster)
Of the species Oncorhynchus mykiss, weighing more than 400|g each
Of the species Oncorhynchus apache or Oncorhynchus chrysogaster
Other
Of the species Oncorhynchus mykiss
Other
Flat fish (Pleuronectidae, Bothidae, Cynoglossidae, Soleidae, Scophthalmidae and Citharidae)
Plaice (Pleuronectes platessa)
Flounder (Platichthys flesus)
Megrim (Lepidorhombus spp.)
Other
Halibut (Reinhardtius hippoglossoides, Hippoglossus hippoglossus, Hippoglossus stenolepis)
Flat fish (Limanda aspera, Lepidopsetta bilineata, Pleuronectes quadrituberculatus, Limanda ferruginea, Lepidopsetta polyxystra)
For processing
Other
Other
Swordfish (Xiphias gladius)
Toothfish (Dissostichus spp.)
Herring (Clupea harengus, Clupea pallasii)
Tuna (of the genus Thunnus), skipjack or stripe-bellied bonito (Euthynnus (Katsuwonus) pelamis)
Atlantic bluefin tuna (Thunnus thynnus)
Bigeye tuna (Thunnus obesus)
Other
Other
Freshwater fish
Other
Redfish (Sebastes spp.)
Of the species Sebastes marinus
Other
Of the species Sebastes mentella
Other
Fish of the genus Euthynnus, other than the skipjack or stripe-bellied bonito (Euthynnus (Katsuwonus) pelamis) mentioned in subheading|0304|87|00
Mackerel (Scomber scombrus, Scomber australasicus, Scomber japonicus) and fish of the species Orcynopsis unicolor
Mackerel of the species Scomber australasicus
Other
Mackerel of the species Scomber scombrus
Mackerel of the species Scomber japonicus
Fish of the species Orcynopsis unicolor
Dogfish and other sharks
Dogfish (Squalus acanthias, Scyliorhinus spp.)
Porbeagle shark (Lamna nasus)
Other sharks
Monkfish (Lophius spp.)
Other
Of the species Allocyttus|spp. and Pseudocyttus maculatus
Ray's bream (Brama|spp.)
Sea bream (Dentex dentex, Pagellus|spp.)
European sea bass (Dicentrarchus labrax)
Bogue (Boops boops)
Gilt-head sea bream (Sparus aurata)
Other
Other, frozen
Swordfish (Xiphias gladius)
Toothfish (Dissostichus spp.)
Tilapia (Oreochromis spp.), catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.), carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys spp., Cirrhinus spp., Mylopharyngodon piceus), eels (Anguilla spp.), Nile perch (Lates niloticus) and snakeheads (Channa spp.)
Surimi
For processing
Other
Other
Carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys|spp., Cirrhinus|spp., Mylopharyngodon piceus)
Other
Alaska pollack (Theragra chalcogramma)
Surimi
For processing
Other
Other
For processing
Other
Fish of the families Bregmacerotidae, Euclichthyidae, Gadidae, Macrouridae, Melanonidae, Merlucciidae, Moridae and Muraenolepididae, other than Alaska pollack (Theragra chalcogramma)
Surimi
For processing
Other
Other
Cod (Gadus morhua, Gadus ogac, Gadus macrocephalus) and fish of the species Boreogadus saida
Cod of the species Gadus macrocephalus
For processing
Other
Cod of the species Gadus morhua
For processing
Other
Other
Haddock (Melanogrammus aeglefinus)
Coalfish (Pollachius virens)
Hake of the genus Merluccius
Hake (Merluccius productus) for processing
Other
Blue whiting (Micromesistius poutassou, Gadus poutassou)
Other
Fish of the genus Macruronus spp.
Blue grenadier (Macruronus novaezelandiae)
For processing
Other
Other
For processing
Other
Hake of the genus Urophycis spp.
Other
Other
Surimi
For processing
Other
Other
Freshwater fish
Of trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae); of Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou, Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Of trout (Oncorhynchus mykiss)
Of trout (Salmo trutta, Oncorhynchus clarki, Oncorhynchus aguabonita and Oncorhynchus gilae)
Of Atlantic salmon (Salmo salar)
Of Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou, Oncorhynchus rhodurus) and Danube salmon (Hucho hucho)
Of trout (Oncorhynchus apache and Oncorhynchus chrysogaster)
Other
Other
Herring (Clupea harengus, Clupea pallasii)
Flaps, of a weight exceeding 80|g per piece, for industrial manufacture
Other flaps for industrial manufacture
Other flaps
Other
Redfish (Sebastes spp.)
Megrim (Lepidorhombus spp.)
Ray's bream (Brama spp.)
Monkfish (Lophius spp.)
Other
Of mackerel (Scomber scombrus, Scomber australasicus, Scomber japonicus)
Flaps
Other
Sea bream (Dentex dentex, Pagellus|spp.)
Of gilt-head sea breams (Sparus aurata)
Of sharks (Squalus spp.)
Of bluefin tunas (Thunnus thynnus)
Of Atlantic bigeye tuna (Thunnus obesus)
Of flatfish (Limanda aspera, Lepidopsetta bilineata, Pleuronectes quadrituberculatus, Limanda ferruginea, Lepidopsetta polyxystra)
For processing
Other
European sea bass (Dicentrarchus labrax)
Other
Fish, dried, salted or in brine; smoked fish, whether or not cooked before or during the smoking process; flours, meals and pellets of fish, fit for human consumption
Flours, meals and pellets of fish, fit for human consumption
Of trout of the species Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster
Carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys|spp., Cirrhinus|spp., Mylopharyngodon piceus)
Sea bream (Dentex dentex, Pagellus|spp.)
Gilt-head sea bream (Sparus aurata)
Of sea bass (Dicentrarchus labrax)
Other
Livers and roes of fish, dried, smoked, salted or in brine
Hard roes, salted or in brine
Of herrings
Other
Atlantic bluefin tuna (Thunnus thynnus)
Of swordfish (Xiphias gladius)
Bigeye tuna (Thunnus obesus)
Other
Other
Of herrings
Smoked
Other
Other
Atlantic bluefin tuna (Thunnus thynnus)
Smoked
Other
Of swordfish (Xiphias gladius)
Smoked
Other
Bigeye tuna (Thunnus obesus)
Smoked
Other
Other
Smoked
Other
Fish fillets, dried, salted or in brine, but not smoked
Tilapia (Oreochromis spp.), catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.), carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys spp., Cirrhinus spp., Mylopharyngodon piceus), eels (Anguilla spp.), Nile perch (Lates niloticus) and snakeheads (Channa spp.)
Carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys|spp., Cirrhinus|spp., Mylopharyngodon piceus)
Other
Fish of the families Bregmacerotidae, Euclichthyidae, Gadidae, Macrouridae, Melanonidae, Merlucciidae, Moridae and Muraenolepididae
Cod (Gadus morhua, Gadus ogac, Gadus macrocephalus) and fish of the species Boreogadus saida
Cod of the species Gadus macrocephalus
Other
Cod of the species Gadus morhua
Other
Other
Other
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar), and Danube salmon (Hucho hucho), salted or in brine
Atlantic salmon (Salmo salar)
Other
Lesser or Greenland halibut (Reinhardtius hippoglossoides), salted or in brine
Other
Trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster)
Fish of the species Clupea ilisha, in brine
Atlantic bluefin tuna (Thunnus thynnus)
Bigeye tuna (Thunnus obesus)
Swordfish (Xiphias gladius)
Gilt-head sea bream (Sparus aurata)
Bogue (Boops boops)
Sea bream (Dentex dentex, Pagellus|spp.)
European sea bass (Dicentrarchus labrax)
Other
Smoked fish, including fillets, other than edible fish offal
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Atlantic salmon (Salmo salar)
Other
Herring (Clupea harengus, Clupea pallasii)
Smoked fillets of herrings (Clupea harengus)
Other
Trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Oncorhynchus chrysogaster)
Of the species Oncorhynchus mykiss
In the form of whole fish (with heads on), whether or not gilled, whether or not gutted, weighing 1,2 kg or less each; with heads off, whether or not gilled, whether or not gutted, weighing 1 kg or less each; fillets weighing 400 g or less each
Other
Other
Tilapia (Oreochromis spp.), catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.), carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys spp., Cirrhinus spp., Mylopharyngodon piceus), eels (Anguilla spp.), Nile perch (Lates niloticus) and snakeheads (Channa spp.)
Eels (Anguilla spp.)
Other
Carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys|spp., Cirrhinus|spp., Mylopharyngodon piceus)
Other
Other
Lesser or Greenland halibut (Reinhardtius hippoglossoides)
Atlantic halibut (Hippoglossus hippoglossus)
Mackerel (Scomber scombrus, Scomber australasicus, Scomber japonicus)
Of the species Scomber scombrus
Other
Other
Atlantic bluefin tuna (Thunnus thynnus)
Swordfish (Xiphias gladius)
Gilt-head sea bream (Sparus aurata)
Sea bream (Dentex dentex, Pagellus|spp.)
European sea bass (Dicentrarchus labrax)
Bigeye tuna (Thunnus obesus)
Other
Dried fish, other than edible fish offal, whether or not salted but not smoked
Cod (Gadus morhua, Gadus ogac, Gadus macrocephalus)
Dried, unsalted
Of the species Gadus morhua
Of the species Gadus ogac
Of the species Gadus macrocephalus
Dried, salted
Of the species Gadus morhua
Of the species Gadus ogac
Of the species Gadus macrocephalus
Other
Fish of the species Boreogadus saida
Dried, unsalted
Dried, salted
Herring (Clupea harengus, Clupea pallasii)
Anchovies (Engraulis spp.)
Atlantic halibut (Hippoglossus hippoglossus)
Other
Ling (Molva molva)
Bleu ling (Molva dipterygia dipterygia)
Tusk (Brosme brosme)
Atlantic bluefin tuna (Thunnus thynnus)
Bigeye tuna (Thunnus obesus)
Swordfish (Xiphias gladius)
Trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Onchorhynchus chrysogaster)
Carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys|spp., Cirrhinus|spp., Mylopharyngodon piceus)
Gilt-head sea bream (Sparus aurata)
Sea bream (Dentex dentex, Pagellus|spp.)
Sea bass (Dicentrarchus labrax)
Lesser or Greenland Halibut (Reinhardtius hippoglossoides), and Pacific Halibut (Hippoglossus stenolepis)
Coalfish (Pollachius Virens), salted and dried
Other
Fish, salted but not dried or smoked and fish in brine, other than edible fish offal
Herring (Clupea harengus, Clupea pallasii)
Cod (Gadus morhua, Gadus ogac, Gadus macrocephalus)
For processing
Of the species Gadus morhua
Of the species Gadus ogac
Of the species Gadus macrocephalus
Other
Of the species Gadus morhua
Of the species Gadus ogac
Of the species Gadus macrocephalus
Anchovies (Engraulis spp.)
Engraulis anchoita, for processing
Other
Tilapia (Oreochromis spp.), catfish (Pangasius spp., Silurus spp., Clarias spp., Ictalurus spp.), carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys spp., Cirrhinus spp., Mylopharyngodon piceus), eels (Anguilla spp.), Nile perch (Lates niloticus) and snakeheads (Channa spp.)
Carp (Cyprinus carpio, Carassius carassius, Ctenopharyngodon idellus, Hypophthalmichthys|spp., Cirrhinus|spp., Mylopharyngodon piceus)
Other
Other
Fish of the species Boreogadus saida
For processing
Other
Atlantic halibut (Hippoglossus hippoglossus)
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Other
Fish of the species Clupea ilisha, in brine
Atlantic bluefin tuna (Thunnus thynnus)
Bigeye tuna (Thunnus obesus)
Swordfish (Xiphias gladius)
Trout (Salmo trutta, Oncorhynchus mykiss, Oncorhynchus clarki, Oncorhynchus aguabonita, Oncorhynchus gilae, Oncorhynchus apache and Onchorhynchus chrysogaster)
Gilt-head sea bream (Sparus aurata)
Sea bream (Dentex dentex, Pagellus|spp.)
European sea bass (Dicentrarchus labrax)
Lesser or Greenland Halibut (Reinhardtius hippoglossoides), and Pacific Halibut (Hippoglossus stenolepis)
Other
Fish fins, heads, tails, maws and other edible fish offal
Shark fins
Smoked
Other
Fish heads, tails and maws
Dried, whether or not salted but not smoked
Of the species Gadus morhua
salted
unsalted
Of the species Gadus ogac
salted
unsalted
Of the species Boreogadus saida
salted
unsalted
Of the species Gadus macrocephalus
salted
unsalted
Other
Anchovies (Engraulis spp.)
Herring (Clupea harengus, Clupea pallasii)
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Atlantic halibut (Hippoglossus hippoglossus)
Other
Salted but not dried or smoked and in brine
For processing
Of the species Gadus morhua
Anchovies (Engraulis spp.)
Of the species Gadus ogac
Herring (Clupea harengus, Clupea pallasii)
Of the species Gadus macrocephalus
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Of the species Boreogadus saida
Atlantic halibut (Hippoglossus hippoglossus)
Other
Other
Of the species Gadus morhua
Anchovies (Engraulis spp.)
Of the species Gadus ogac
Herring (Clupea harengus, Clupea pallasii)
Of the species Boreogadus saida
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Of the species Gadus macrocephalus
Atlantic halibut (Hippoglossus hippoglossus)
Other
Other
Other
Dried, whether or not salted but not smoked
Of the species Gadus morhua
salted
unsalted
Of the species Gadus ogac
salted
unsalted
Of the species Boreogadus saida
salted
unsalted
Of the species Gadus macrocephalus
salted
unsalted
Other
Anchovies (Engraulis spp.)
Herring (Clupea harengus, Clupea pallasii)
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Atlantic halibut (Hippoglossus hippoglossus)
Other
Salted but not dried or smoked and in brine
For processing
Of the species Gadus morhua
Anchovies (Engraulis spp.)
Of the species Gadus ogac
Herring (Clupea harengus, Clupea pallasii)
Of the species Gadus macrocephalus
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Of the species Boreogadus saida
Atlantic halibut (Hippoglossus hippoglossus)
Other
Other
Of the species Gadus morhua
Anchovies (Engraulis spp.)
Of the species Gadus ogac
Herring (Clupea harengus, Clupea pallasii)
Of the species Boreogadus saida
Pacific salmon (Oncorhynchus nerka, Oncorhynchus gorbuscha, Oncorhynchus keta, Oncorhynchus tschawytscha, Oncorhynchus kisutch, Oncorhynchus masou and Oncorhynchus rhodurus), Atlantic salmon (Salmo salar) and Danube salmon (Hucho hucho)
Of the species Gadus macrocephalus
Atlantic halibut (Hippoglossus hippoglossus)
Other
Other
Crustaceans, whether in shell or not, live, fresh, chilled, frozen, dried, salted or in brine; smoked crustaceans, whether in shell or not, whether or not cooked before or during the smoking process; crustaceans, in shell, cooked by steaming or by boiling in water, whether or not chilled, frozen, dried, salted or in brine; flours, meals and pellets of crustaceans, fit for human consumption
Frozen
Rock lobster and other sea crawfish (Palinurus spp., Panulirus spp., Jasus spp.)
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Crawfish tails
For processing
Other
Other
Lobsters (Homarus spp.)
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Whole
Lobster (Homarus americanus), cooked
Other
Other
Lobster (Homarus americanus), in pieces, cooked
Other
Crabs
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Crabs of the species Paralithodes camchaticus, Chionoecetes spp. or Callinectes sapidus
Crabs of the species Cancer pagurus
Other
Crab of the species Geryon affinis
Other
Norway lobsters (Nephrops norvegicus)
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Cold-water shrimps and prawns (Pandalus spp., Crangon crangon)
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Shrimps of the species Crangon crangon
Other
Of the species Pandalus borealis, in shell, for processing
Of the species Pandalus montagui, in shell, for processing
Other
Other shrimps and prawns
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Deepwater rose shrimps (Parapenaeus longirostris)
Shrimps of the genus Penaeus
Shrimps and prawns of the specie Penaeus vannamei and Penaeus monodon, whether in shell or not, not cooked, for processing
Other
Shrimps of the family Pandalidae, other than of the genus Pandalus
Shrimps of the genus Crangon, other than of the species Crangon crangon
Other
Shrimps and prawns of the specie Pleoticus muelleri, whether in shell or not, for processing
Other
Other, including flours, meals and pellets of crustaceans, fit for human consumption
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Freshwater crayfish
Other
Not frozen
Rock lobster and other sea crawfish (Palinurus spp., Panulirus spp., Jasus spp.)
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Lobsters (Homarus spp.)
Live
Other
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Whole
Other
Crabs
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Crabs of the species Cancer pagurus
Other
Norway lobsters (Nephrops norvegicus)
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Cold-water shrimps and prawns (Pandalus spp., Crangon crangon)
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Shrimps of the species Crangon crangon
Fresh or chilled, or cooked by steaming or by boiling in water
Other
Other
Fresh (live or dead)
Of the species Pandalus borealis, in shell, for processing
Of the species Pandalus montagui, in shell, for processing
Other
For processing
Other
Other
Of the species Pandalus borealis, in shell, chilled, for processing
Of the species Pandalus montagui, in shell, chilled, for processing
Other
Boiled on board
For processing
Other
Other shrimps and prawns
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Shrimps of the family Pandalidae, other than of the genus Pandalus
Fresh (live or dead)
For processing
Other
Other
Boiled on board
For processing
Other
Shrimps of the genus Crangon, other than of the species Crangon crangon
Other
Shrimps and prawns of the specie Pleoticus muelleri, whether in shell or not, fresh or chilled, for processing
Shrimps and prawns of the specie Penaeus vannamei and Penaeus monodon, whether in shell or not, fresh or chilled, not cooked, for processing
Other
Other, including flours, meals and pellets of crustaceans, fit for human consumption
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Freshwater crayfish
Other
Peurullus|spp.
Other
Molluscs, whether in shell or not, live, fresh, chilled, frozen, dried, salted or in brine; smoked molluscs, whether in shell or not, whether or not cooked before or during the smoking process; flours, meals and pellets of molluscs, fit for human consumption
Oysters
Live, fresh or chilled
Flat oysters (of the genus Ostrea), live and weighing (shell included) not more than 40|g each
Intended for human consumption
Other
Other
Intended for human consumption
Other
Other
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Scallops, including queen scallops, of the genera Pecten, Chlamys or Placopecten
Live, fresh or chilled
Coquilles St Jacques (Pecten maximus)
Intended for human consumption
Other
Other
Intended for human consumption
Other
Other
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Coquilles St Jacques (Pecten maximus), frozen
Other
Mussels (Mytilus spp., Perna spp.)
Live, fresh or chilled
Mytilus spp.
Intended for human consumption
Other
Perna spp.
Intended for human consumption
Other
Other
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Mytilus spp.
Perna spp.
Cuttle fish (Sepia officinalis, Rossia macrosoma, Sepiola spp.) and squid (Ommastrephes spp., Loligo spp., Nototodarus spp., Sepioteuthis spp.)
Live, fresh or chilled
Cuttle fish (Sepia officinalis, Rossia macrosoma, Sepiola spp.)
Squid (Ommastrephes spp., Loligo spp., Nototodarus spp., Sepioteuthis spp.)
Loligo spp.
Other
Other
Smoked, whether or not cooked before or during the smoking process, not otherwise prepared
Frozen
Cuttle fish (Sepia officinalis, Rossia macrosoma, Sepiola spp.)
Of the genus Sepiola
Lesser cuttle fish (Sepiola rondeleti)
Other
Other
Squid (Ommastrephes spp., Loligo spp., Nototodarus spp., Sepioteuthis spp.)
Loligo spp.
Loligo vulgaris
Loligo pealei
Loligo patagonica
Other
Other
Pod (body of cephalopod or the squid headless and without tentacles), with skin and fins, for processing
Whole or tentacles and fins, for processing
Other
Other
Cuttle fish (Sepia officinalis, Rossia macrosoma, Sepiola spp.)
Squid (Ommastrephes spp., Loligo spp., Nototodarus spp., Sepioteuthis spp.)
Loligo spp.
Other
Octopus (Octopus spp.)
Live, fresh or chilled
Other
Smoked, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Frozen
Other
Snails, other than sea snails
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Clams, cockles and ark shells (families Arcidae, Arcticidae, Cardiidae, Donacidae, Hiatellidae, Mactridae, Mesodesmatidae, Myidae, Semelidae, Solecurtidae, Solenidae, Tridacnidae and Veneridae)
Live, fresh or chilled
Intended for human consumption
Other
Other
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Striped venus or other species of the family Veneridae, frozen
Other
Abalone (Haliotis spp.)
Live, fresh or chilled
Intended for human consumption
Other
Other
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Other
Other, including flours, meals and pellets, fit for human consumption
Live, fresh or chilled
European flying squid (Todarodes sagittatus)
Other
Common whelk (Buccinum undatum)
Other
Other
Smoked, whether in shell or not, whether or not cooked before or during the smoking process, not otherwise prepared
Frozen
Illex spp.
Pod (body of cephalopod or the squid headless and without tentacles), with skin and fins, for processing
Whole or tentacles and fins, for processing
Other
European flying squid (Todarodes sagittatus)
Other
Common whelk (Buccinum undatum)
Todarodes pacificus
Pod (body of cephalopod or the squid headless and without tentacles), with skin and fins, for processing
Whole or tentacles and fins, for processing
Other
Other
Other
European flying squid (Todarodes sagittatus)
Other
Aquatic invertebrates other than crustaceans and molluscs, live, fresh, chilled, frozen, dried, salted or in brine; smoked aquatic invertebrates other than crustaceans and molluscs, whether or not cooked before or during the smoking process; flours, meals and pellets of aquatic invertebrates other than crustaceans and molluscs, fit for human consumption
Sea cucumbers (Stichopus japonicus, Holothurioidea)
Live, fresh or chilled
Other
Smoked, whether or not cooked before or during the smoking process, not otherwise prepared
Frozen
Other
Sea urchins (Strongylocentrotus spp., Paracentrotus lividus, Loxechinus albus, Echinus esculentus)
Live, fresh or chilled
Other
Smoked, whether or not cooked before or during the smoking process, not otherwise prepared
Frozen
Other
Jellyfish (Rhopilema spp.)
Live, fresh or chilled
Smoked, whether or not cooked before or during the smoking process, not otherwise prepared
Frozen
Other
Other
Live, fresh or chilled
Smoked, whether or not cooked before or during the smoking process, not otherwise prepared
Frozen
Other
DAIRY PRODUCE; BIRDS' EGGS; NATURAL HONEY; EDIBLE PRODUCTS OF ANIMAL ORIGIN, NOT ELSEWHERE SPECIFIED OR INCLUDED
Milk and cream, not concentrated nor containing added sugar or other sweetening matter
Of a fat content, by weight, not exceeding 1|%
In immediate packings of a net content not exceeding two litres
Other
Of a fat content, by weight, exceeding 1|% but not exceeding 6|%
Not exceeding 3|%
In immediate packings of a net content not exceeding two litres
Other
Exceeding 3|%
In immediate packings of a net content not exceeding two litres
Other
Of a fat content, by weight, exceeding|6|% but not exceeding|10|%
In immediate packings of a net content not exceeding two litres
Cream
Milk
Other
Cream
Milk
Of a fat content, by weight, exceeding 10|%
Not exceeding 21|%
In immediate packings of a net content not exceeding two litres
Cream
Milk
Other
Cream
Milk
Exceeding 21|% but not exceeding 45|%
In immediate packings of a net content not exceeding two litres
Cream
Milk
Other
Cream
Milk
Exceeding 45|%
In immediate packings of a net content not exceeding two litres
Cream
Milk
Other
Cream
Milk
Milk and cream, concentrated or containing added sugar or other sweetening matter
In powder, granules or other solid forms, of a fat content, by weight, not exceeding 1,5|%
Not containing added sugar or other sweetening matter
In immediate packings of a net content not exceeding 2,5|kg
Other
Other
In immediate packings of a net content not exceeding 2,5|kg
Other
In powder, granules or other solid forms, of a fat content, by weight, exceeding 1,5|%
Not containing added sugar or other sweetening matter
Of a fat content, by weight, not exceeding 27|%
In immediate packings of a net content not exceeding 2,5|kg
Other
Of a fat content, by weight, exceeding 27|%
In immediate packings of a net content not exceeding 2,5|kg
Other
Other
Of a fat content, by weight, not exceeding 27|%
Special milk, for infants, in hermetically sealed containers of a net content not exceeding 500|g, of a fat content, by weight, exceeding 10|%
Other
In immediate packings of a net content not exceeding 2,5|kg
Other
Of a fat content, by weight, exceeding 27|%
In immediate packings of a net content not exceeding 2,5|kg
Other
Other
Not containing added sugar or other sweetening matter
Of a fat content, by weight, not exceeding 8|%
Of a fat content, by weight, exceeding 8|% but not exceeding 10|%
Of a fat content, by weight, exceeding 10|% but not exceeding 45|%
In immediate packings of a net content not exceeding 2,5|kg
Other
Of a fat content, by weight, exceeding 45|%
In immediate packings of a net content not exceeding 2,5|kg
Other
Other
Of a fat content, by weight, not exceeding 9,5|%
Of a fat content, by weight, exceeding 9,5|% but not exceeding 45|%
In immediate packings of a net content not exceeding 2,5|kg
Other
Of a fat content, by weight, exceeding 45|%
In immediate packings of a net content not exceeding 2,5|kg
Other
Buttermilk, curdled milk and cream, yogurt, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoa
Yogurt
Not flavoured nor containing added fruit, nuts or cocoa
Not containing added sugar or other sweetening matter, of a fat content, by weight
Not exceeding 3|%
Exceeding 3|% but not exceeding 6|%
Exceeding 6|%
Other, of a fat content, by weight
Not exceeding 3|%
Exceeding 3|% but not exceeding 6|%
Exceeding 6|%
Flavoured or containing added fruit, nuts or cocoa
In powder, granules or other solid forms, of a milkfat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Other, of a milkfat content, by weight
Not exceeding 3|%
Exceeding 3|% but not exceeding 6|%
Exceeding 6|%
Other
Not flavoured nor containing added fruit, nuts or cocoa
In powder, granules or other solid forms
Not containing added sugar or other sweetening matter, of a fat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Other, of a fat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Other
Not containing added sugar or other sweetening matter, of a fat content, by weight
Not exceeding 3|%
Exceeding 3|% but not exceeding 6|%
Exceeding 6|%
Other, of a fat content, by weight
Not exceeding 3|%
Exceeding 3|% but not exceeding 6|%
Exceeding 6|%
Flavoured or containing added fruit, nuts or cocoa
In powder, granules or other solid forms, of a milkfat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Other, of a milkfat content, by weight
Not exceeding 3|%
Exceeding 3|% but not exceeding 6|%
Exceeding 6|%
Whey, whether or not concentrated or containing added sugar or other sweetening matter; products consisting of natural milk constituents, whether or not containing added sugar or other sweetening matter, not elsewhere specified or included
Whey and modified whey, whether or not concentrated or containing added sugar or other sweetening matter
In powder, granules or other solid forms
Not containing added sugar or other sweetening matter, of a protein content (nitrogen content|!x!|6,38), by weight
Not exceeding 15|%, and of a fat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Exceeding 15|%, and of a fat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Other, of a protein content (nitrogen content|!x!|6,38), by weight
Not exceeding 15|%, and of a fat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Exceeding 15|%, and of a fat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Other
Not containing added sugar or other sweetening matter, of a protein content (nitrogen content|!x!|6,38), by weight
Not exceeding 15|%, and of a fat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Exceeding 15|%, and of a fat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Other, of a protein content (nitrogen content|!x!|6,38), by weight
Not exceeding 15|%, and of a fat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Exceeding 15|%, and of a fat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Other
Not containing added sugar or other sweetening matter, of a fat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Exceeding 27|%
Other, of a fat content, by weight
Not exceeding 1,5|%
Exceeding 1,5|% but not exceeding 27|%
Special milk, for infants, in hermetically sealed containers of a net content not exceeding|500|g of a fat content, by weight, exceeding|10|%
Other
Exceeding 27|%
Butter and other fats and oils derived from milk; dairy spreads
Butter
Of a fat content, by weight, not exceeding 85|%
Natural butter
In immediate packings of a net content not exceeding 1|kg
Butter, at least six weeks old, of a fat content by weight of not less than 80% but less than 85%, manufactured directly from milk or cream without the use of stored materials, in a single, self-contained and uninterrupted process
Other
Other
Butter, at least six weeks old, of a fat content by weight of not less than 80% but less than 85%, manufactured directly from milk or cream without the use of stored materials, in a single, self-contained and uninterrupted process
Other
Recombined butter
Butter, at least six weeks old, of a fat content by weight of not less than 80% but less than 85%, manufactured directly from milk or cream without the use of stored materials, in a single, self-contained and uninterrupted process which may involve the cream passing through a stage where the butterfat is concentrated and/or fractionated (the processes referred to as "Ammix" and "Spreadable")
Other
Whey butter
Other
Dairy spreads
Of a fat content, by weight, of 39|% or more but less than 60|%
In immediate packings of a net capacity of 1|kg or less
Other
Of a fat content, by weight, of 60|% or more but not exceeding 75|%
In immediate packings of a net capacity of 1|kg or less
Other
Of a fat content, by weight, of more than 75|% but less than 80|%
Other
Of a fat content, by weight, of 99,3|% or more and of a water content, by weight, not exceeding 0,5|%
Other
Cheese and curd
Fresh (unripened or uncured) cheese, including whey cheese, and curd
Of a fat content, by weight, not exceeding 40|%
Mozzarella, whether or not in a liquid
Pizza cheese, frozen, cut into pieces each weighing not more than 1|gram, in containers with a net content of 5kg or more, of a water content, by weight, of 52% or more, and a fat content by weight in the dry matter of 38% or more
Other
Other
Skyr
Pizza cheese, frozen, cut into pieces each weighing not more than 1|gram, in containers with a net content of 5kg or more, of a water content, by weight, of 52% or more, and a fat content by weight in the dry matter of 38% or more
Other
Other
Pizza cheese, frozen, cut into pieces each weighing not more than 1|gram, in containers with a net content of 5kg or more, or a water content, by weight, of 52% or more, and a fat content by weight in the dry matter of 38% or more
Other
Grated or powdered cheese, of all kinds
Processed cheese, not grated or powdered
In the manufacture of which no cheeses other than Emmentaler, Gruyère and Appenzell have been used and which may contain, as an addition, Glarus herb cheese (known as Schabziger); put up for retail sale, of a fat content by weight in the dry matter not exceeding 56|%
Processed Emmentaler
Processed Gruyère
Other
Other
Of a fat content, by weight, not exceeding 36|% and of a fat content, by weight, in the dry matter
Not exceeding 48|%
Exceeding 48|%
Of a fat content, by weight, exceeding 36|%
Blue-veined cheese and other cheese containing veins produced by Penicillium roqueforti
Roquefort
Gorgonzola
Other
Other cheese
For processing
Other
Emmentaler
Gruyère, Sbrinz
Bergkäse, Appenzell
Fromage fribourgeois, Vacherin Mont d'Or and Tête de Moine
Cheddar
Made from unpasteurized milk, of a minimum fat content of 50% by weight, in the dry matter, matured for at least nine months, of a free-at-frontier value per 100|kg net weight of 334,20|Euro or more in the case of standard whole sizes (cheeses of the conventional flat cylindrical shape of a net weight of not less than 33|kg but not more than 44|kg; cubic block shape or parallelepiped shape, of a net weight of 10|kg or more), 354,83|Euro or more in the case of cheeses of a net weight of 500|g or more and 368,58|Euro or more in the case of cheeses of a net weight of less than 500|g
Whole cheeses (of the conventional flat cylindrical shape of a net weight of not less than 33|kg but not more than 44|kg and cheeses in cubic blocks or in parallelepiped shape, of a net weight of 10|kg or more) of a minimum fat content of 50% by weight, in the dry matter, matured for at least three months
Other
Edam
Tilsit
Kashkaval
Feta
Kefalo-Tyri
Finlandia
Jarlsberg
Other
Cheese of sheep's milk or buffalo milk in containers containing brine, or in sheepskin or goatskin bottles
Other
Of a fat content, by weight, not exceeding 40|% and a water content, by weight, in the non-fatty matter
Not exceeding 47|%
Grana Padano, Parmigiano Reggiano
Fiore Sardo, Pecorino
Pecorino
Other
Other
Exceeding 47|% but not exceeding 72|%
Provolone
Maasdam
Asiago, Caciocavallo, Montasio, Ragusano
Caciocavallo
Other
Danbo, Fontal, Fontina, Fynbo, Havarti, Maribo, Samsø
Fontina
Other
Gouda
Esrom, Italico, Kernhem, Saint-Nectaire, Saint-Paulin, Taleggio
Esrom, Italico, Kernhem, Saint-Paulin
Other
Cantal, Cheshire, Wensleydale, Lancashire, Double Gloucester, Blarney, Colby, Monterey
Cantal
Other
Camembert
Brie
Kefalograviera, Kasseri
Other cheese, of a water content, by weight, in the non-fatty matter
Exceeding 47|% but not exceeding 52|%
"Tulum Peyniri", made from sheep's milk or 'buffalo' milk, in packings of less than 10|kg
Other
Exceeding 52|% but not exceeding 62|%
"Tulum Peyniri", made from sheep's milk or 'buffalo' milk, in packings of less than 10|kg
Other
Exceeding 62|% but not exceeding 72|%
"Tulum Peyniri", made from sheep's milk or 'buffalo' milk, in packings of less than 10|kg
Other
Exceeding 72|%
Other
Birds' eggs, in shell, fresh, preserved or cooked
Fertilised eggs for incubation
Of fowls of the species Gallus domesticus
Other
Of poultry, other than of fowls of the species Gallus domesticus
Of turkeys or geese
Other
Other
Other fresh eggs
Of fowls of the species Gallus domesticus
Other
Of poultry, other than of fowls of the species Gallus domesticus
Other
Other
Of poultry
Other
Birds' eggs, not in shell, and egg yolks, fresh, dried, cooked by steaming or by boiling in water, moulded, frozen or otherwise preserved, whether or not containing added sugar or other sweetening matter
Egg yolks
Dried
Unfit for human consumption
Other
Other
Unfit for human consumption
Other
Liquid
Other, including frozen
Other
Dried
Unfit for human consumption
Other
Other
Unfit for human consumption
Other
Natural honey
Edible products of animal origin, not elsewhere specified or included
PRODUCTS OF ANIMAL ORIGIN, NOT ELSEWHERE SPECIFIED OR INCLUDED
Human hair, unworked, whether or not washed or scoured; waste of human hair
Pigs', hogs' or boars' bristles and hair; badger hair and other brush making hair; waste of such bristles or hair
Pigs', hogs' or boars' bristles and hair and waste thereof
Other
Guts, bladders and stomachs of animals (other than fish), whole and pieces thereof, fresh, chilled, frozen, salted, in brine, dried or smoked
casings
Other
Skins and other parts of birds, with their feathers or down, feathers and parts of feathers (whether or not with trimmed edges) and down, not further worked than cleaned, disinfected or treated for preservation; powder and waste of feathers or parts of feathers
Feathers of a kind used for stuffing; down
Raw
Other
Other
Bones and horn-cores, unworked, defatted, simply prepared (but not cut to shape), treated with acid or degelatinised; powder and waste of these products
Ossein and bones treated with acid
Other
Ivory, tortoiseshell, whalebone and whalebone hair, horns, antlers, hooves, nails, claws and beaks, unworked or simply prepared but not cut to shape; powder and waste of these products
Ivory; ivory powder and waste
Other
Coral and similar materials, unworked or simply prepared but not otherwise worked; shells of molluscs, crustaceans or echinoderms and cuttle-bone, unworked or simply prepared but not cut to shape, powder and waste thereof
Empty shells for food use and use as raw material for glucosamine
Shells containing soft tissue and flesh used for different purposes covered under Article 10(k)(i) of Regulation (EC) No 1069/2009
Other
Ambergris, castoreum, civet and musk; cantharides; bile, whether or not dried; glands and other animal products used in the preparation of pharmaceutical products, fresh, chilled, frozen or otherwise provisionally preserved
Animal products not elsewhere specified or included; dead animals of Chapter|1|or 3, unfit for human consumption
Bovine semen
Other
Products of fish or crustaceans, molluscs or other aquatic invertebrates; dead animals of Chapter|3
Fish waste
Other
Other
Sinews or tendons; parings and similar waste of raw hides or skins
Natural sponges of animal origin
Raw
Other
Other
Mammalian semen
Mammalian ova and mammalian embryos
Other
LIVE TREES AND OTHER PLANTS; BULBS, ROOTS AND THE LIKE; CUT FLOWERS AND ORNAMENTAL FOLIAGE
Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, dormant, in growth or in flower; chicory plants and roots other than roots of heading|1212
Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, dormant
Hyacinths
Narcissi
Tulips
Gladioli
Other
Bulbs, tubers, tuberous roots, corms, crowns and rhizomes, in growth or in flower; chicory plants and roots
Chicory plants and roots
Orchids, hyacinths, narcissi and tulips
Other
Plants (rhizomes in flower) of Colocasia Schott
Other
Other live plants (including their roots), cuttings and slips; mushroom spawn
Unrooted cuttings and slips
Of vines
Other
Mormodica L., Solanum Melogena L. and Trichosantes L.
Other
Trees, shrubs and bushes, grafted or not, of kinds which bear edible fruit or nuts
Vine slips, grafted or rooted
Other
With bare roots
Mangifera L.
Other
Other
Citrus
Other
Mangifera L.
Other
Rhododendrons and azaleas, grafted or not
Rhododendrons
Azaleas
Roses, grafted or not
Cuttings
Other
Other
Mushroom spawn
Pineapple plants
Vegetable and strawberry plants
Mormodica L., Solanum Melogena L. and Trichosantes L.
Other
Other
Outdoor plants
Trees, shrubs and bushes
Forest trees
Other
Rooted cuttings and young plants
Other
With bare roots
Other
Conifers and evergreens
Other
Other outdoor plants
Mormodica L., Solanum Melogena L. and Trichosantes L.
Other
Indoor plants
Rooted cuttings and young plants, excluding cacti
Other
Flowering plants with buds or flowers, excluding cacti
Potted plants not exceeding 1|m in height
Other
Other
Potted plants not exceeding 1|m in height
Other
Cut flowers and flower buds of a kind suitable for bouquets or for ornamental purposes, fresh, dried, dyed, bleached, impregnated or otherwise prepared
Fresh
Roses
Carnations
Orchids
Chrysanthemums
Lilies (Lilium spp.)
Other
Gladioli
Ranunculi
Other
Of the genus Protea
Of the genus Banksia, Leucadendron, Brunia and Forsythia
Other
Other
Foliage, branches and other parts of plants, without flowers or flower buds, and grasses, mosses and lichens, being goods of a kind suitable for bouquets or for ornamental purposes, fresh, dried, dyed, bleached, impregnated or otherwise prepared
Fresh
Mosses and lichens
Reindeer moss
Other
Christmas trees
Conifer branches
Other
Other
Mosses and lichens
Reindeer moss
Other
Other
Not further prepared than dried
Other
EDIBLE VEGETABLES AND CERTAIN ROOTS AND TUBERS
Potatoes, fresh or chilled
Seed
Other
For the manufacture of starch
Other
New, from 1|January to 30|June
Other
so-called "New", from 1 July to 31 December
Other
Tomatoes, fresh or chilled
Cherry tomatoes
Other
Onions, shallots, garlic, leeks and other alliaceous vegetables, fresh or chilled
Onions and shallots
Onions
Sets
Other
Shallots
Garlic
Leeks and other alliaceous vegetables
Leeks
Other
Cabbages, cauliflowers, kohlrabi, kale and similar edible brassicas, fresh or chilled
Cauliflowers and headed broccoli
Headed broccoli
Other
Brussels sprouts
Other
White cabbages and red cabbages
Other
Chinese cabbage
Brassica oleracea (Chinese Broccoli)
Other
Lettuce (Lactuca sativa) and chicory (Cichorium spp.), fresh or chilled
Lettuce
Cabbage lettuce (head lettuce)
Other
Chicory
Witloof chicory (Cichorium intybus var. foliosum)
Other
Carrots, turnips, salad beetroot, salsify, celeriac, radishes and similar edible roots, fresh or chilled
Carrots and turnips
Carrots
Other
Other
Celeriac (rooted celery or German celery)
Horseradish (Cochlearia armoracia)
Other
Cucumbers and gherkins, fresh or chilled
Cucumbers
Intended for processing
Small cucumbers of a length not exceeding 15 cm
Other
Other
Small cucumbers of a length not exceeding 15 cm
Other
Gherkins
Leguminous vegetables, shelled or unshelled, fresh or chilled
Peas (Pisum sativum)
Unshelled
Other
Beans (Vigna spp., Phaseolus spp.)
Yard long beans (Vigna unguiculata spp. sesquipedalis)
Other
Unshelled
Other
Other leguminous vegetables
Broad beans
Broad beans (Vicia Faba major L.)
Other
Other
Other vegetables, fresh or chilled
Asparagus
Green
Other
Aubergines (eggplants)
Celery other than celeriac
Ribbed celery (Apium graveolens, var. dulce)
Chinese celery (Apium graveolens)
Other
Mushrooms and truffles
Mushrooms of the genus Agaricus
Other
Chanterelles
Fresh or chilled chanterelles for treatment other than simple repacking for retail sale
Other
Flap mushrooms
Truffles
Other
Fruits of the genus Capsicum or of the genus Pimenta
Sweet peppers
Other
Of the genus Capsicum, for the manufacture of capsicin or capsicum oleoresin dyes
For the industrial manufacture of essential oils or resinoids
Other
Peppers (other than sweet) (Capsicum spp.)
Other
Spinach, New Zealand spinach and orache spinach (garden spinach)
Other
Globe artichokes
Olives
For uses other than the production of oil
Other
Fresh
Other
Pumpkins, squash and gourds (Cucurbita spp.)
Courgettes
Other
Other
Salad vegetables, other than lettuce (Lactuca sativa) and chicory (Cichorium spp.)
Chard (or white beet) and cardoons
Capers
Fennel
Sweetcorn
Other
Okra
Trichosanthes L.
Parsley
Wild onions of the genus Muscari comusum
Bitter melon (Momordica L.)
Coriander leaves
Other
Vegetables (uncooked or cooked by steaming or boiling in water), frozen
Potatoes
Leguminous vegetables, shelled or unshelled
Peas (Pisum sativum)
Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6|mm, to be used, in their pods, in the manufacture of prepared meals
Other
Beans (Vigna spp., Phaseolus spp.)
Yard long beans (Vigna unguiculata spp. sesquipedalis)
Other
Other
Spinach, New Zealand spinach and orache spinach (garden spinach)
Sweetcorn
Corn cobs (Zea Mays Saccharata) whether or not cut, with a diameter of 10 mm or more, but not more than 20 mm, for use in the manufacture of products of the food industry for treatment other than simple repacking
Other
Other vegetables
Olives
Fruits of the genus Capsicum or of the genus Pimenta
Sweet peppers
Other
Peppers (Capsicum spp.)
Other
Mushrooms
Of the genus Agaricus
Other
of the species Auricularia polytricha, for the manufacture of prepared meals
Other
Tomatoes
Globe artichokes
Asparagus
Other
Bamboo shoots, frozen, not put up for retail sale
Garlic and Allium ampeloprasum
Aubergines
Haded broccoli
Other
Mixtures of vegetables
Mixtures of vegetables containing garlic and/or Allium ampeloprasum
Other
Vegetables provisionally preserved (for example, by sulphur dioxide gas, in brine, in sulphur water or in other preservative solutions), but unsuitable in that state for immediate consumption
Olives
For uses other than the production of oil
Other
Cucumbers and gherkins
Mushrooms and truffles
Mushrooms of the genus Agaricus
Other
Mushrooms
Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry
Other
Other
Other vegetables; mixtures of vegetables
Vegetables
Fruits of the genus Capsicum or of the genus Pimenta, excluding sweet peppers
Sweetcorn
Onions
Capers
Other
Garlic and Allium ampeloprasum
Other
Mixtures of vegetables
Mixtures of vegetables containing garlic and/or Allium ampeloprasum
Other
Dried vegetables, whole, cut, sliced, broken or in powder, but not further prepared
Onions
Mushrooms, wood ears (Auricularia spp.), jelly fungi (Tremella spp.) and truffles
Mushrooms of the genus Agaricus
Wood ears (Auricularia spp.)
Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale
Other
Jelly fungi (Tremella spp.)
Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale
Other
Other
Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale
Other
Other vegetables; mixtures of vegetables
Potatoes, whether or not cut or sliced but not further prepared
Sweetcorn (Zea mays var. saccharata)
Hybrids for sowing
Other
Tomatoes
Carrots
Other
Garlic and Allium ampeloprasum and mixtures of vegetables containing garlic and/or Allium ampeloprasum
Olives
Other
Dried leguminous vegetables, shelled, whether or not skinned or split
Peas (Pisum sativum)
For sowing
Other
Chickpeas (garbanzos)
Beans (Vigna spp., Phaseolus spp.)
Beans of the species Vigna mungo (L.) Hepper or Vigna radiata (L.) Wilczek
Small red (Adzuki) beans (Phaseolus or Vigna angularis)
Kidney beans, including white pea beans (Phaseolus vulgaris)
For sowing
Other
Bambara beans (Vigna subterranea or Voandzeia subterranea)
Cow peas (Vigna unguiculata)
Other
Lentils
Broad beans (Vicia faba var. major) and horse beans (Vicia faba var. equina, Vicia faba var. minor)
For sowing
Other
Pigeon peas (Cajanus cajan)
Other
For sowing
Other
Manioc, arrowroot, salep, Jerusalem artichokes, sweet potatoes and similar roots and tubers with high starch or inulin content, fresh, chilled, frozen or dried, whether or not sliced or in the form of pellets; sago pith
Manioc (cassava)
Of a kind used for human consumption, in immediate packings of a net content not exceeding 28|kg, either fresh and whole or without skin and frozen, whether or not sliced
Other
Pellets of flour and meal
Other
Sweet potatoes
Fresh, whole, intended for human consumption
Other
Yams (Dioscorea spp.)
Of a kind used for human consumption, in immediate packings of a net content not exceeding 28|kg, either fresh and whole or without skin and frozen, whether or not sliced
Other
Taro (Colocasia spp.)
Of a kind used for human consumption, in immediate packings of a net content not exceeding 28|kg, either fresh and whole or without skin and frozen, whether or not sliced
Other
Yautia (Xanthosoma spp.)
Of a kind used for human consumption, in immediate packings of a net content not exceeding 28|kg, either fresh and whole or without skin and frozen, whether or not sliced
Other
Other
Arrowroot, salep and similar roots and tubers with high starch content
Of a kind used for human consumption, in immediate packings of a net content not exceeding 28|kg, either fresh and whole or without skin and frozen, whether or not sliced
Other
Other
EDIBLE FRUIT AND NUTS; PEEL OF CITRUS FRUIT OR MELONS
Coconuts, Brazil nuts and cashew nuts, fresh or dried, whether or not shelled or peeled
Coconuts
Desiccated
In the inner shell (endocarp)
Other
Brazil nuts
In shell
Shelled
Cashew nuts
In shell
Shelled
Other nuts, fresh or dried, whether or not shelled or peeled
Almonds
In shell
Bitter
Other
Shelled
Bitter
Other
Hazelnuts or filberts (Corylus spp.)
In shell
Shelled
Walnuts
In shell
Shelled
Chestnuts (Castanea spp.)
In shell
Shelled
Pistachios
In shell
Shelled
Macadamia nuts
In shell
Shelled
Kola nuts (Cola spp.)
Areca nuts
Other
Pecans
Pine nuts (Pinus spp.)
Other
Bananas, including plantains, fresh or dried
Plantains
Fresh
Dried
Other
Fresh
Dried
Dates, figs, pineapples, avocados, guavas, mangoes and mangosteens, fresh or dried
Dates
Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries
Other
In immediate containers of a net capacity not exceeding|35|kg
Other
Figs
Fresh
Dried
Pineapples
Dried
Other
Avocados
Fresh
Other
Guavas, mangoes and mangosteens
Mangoes (Mangifera L.)
Other
Citrus fruit, fresh or dried
Oranges
Sweet oranges, fresh
Navels, Navelines, Navelates, Salustianas, Vernas, Valencia lates, Maltese, Shamoutis, Ovalis, Trovita and Hamlins
Of high quality
Other
Other
Sanguines and semi-sanguines
Of high quality
Other
Other
Of high quality
Other
Other
Fresh
Other
Mandarins (including tangerines and satsumas); clementines, wilkings and similar citrus hybrids
Clementines
Fresh
Other
Monreales and satsumas
Fresh
Other
Mandarins and wilkings
Mandarins
Fresh
Other
Wilkings
Fresh
Other
Tangerines
Fresh
Other
Other
Fresh
Citrus hybrids known as "minneolas"
Other
Other
Citrus hybrids known as "minneolas"
Other
Grapefruit, including pomelos
Grapefruit, fresh
White
Pink
Fresh pomelos
White
Pink
Other
Lemons (Citrus limon, Citrus limonum) and limes (Citrus aurantifolia, Citrus latifolia)
Lemons (Citrus limon, Citrus limonum)
Fresh
Other
Limes (Citrus aurantifolia, Citrus latifolia)
Fresh
Other
Other
Grapes, fresh or dried
Fresh
Table grapes
Of the variety Emperor (Vitis vinifera c.v.), from 1 January to 31 January and from 1 December to 31 December
Other
Seedless
Other
Other
Dried
Currants
Sultanas
In immediate containers of a net capacity not exceeding|2|kg
Other
Other
Melons (including watermelons) and papaws (papayas), fresh
Melons (including watermelons)
Watermelons
Other
Amarillo, Cuper, Honey Dew (including Cantalene), Onteniente, Piel de Sapo, (including Verde Liso, Rochet, Tendral, Futuro
Other
Papaws (papayas)
Apples, pears and quinces, fresh
Apples
Cider apples, in bulk, from 16|September to 15|December
Other
Cider apples
Other
Pears
Perry pears, in bulk, from 1|August to 31|December
Other
Of the variety Nashi (Pyrus pyrifolia), Ya (Pyrus bretscheideri)
Other
Quinces
Apricots, cherries, peaches (including nectarines), plums and sloes, fresh
Apricots
Cherries
Sour cherries (Prunus cerasus)
Other
Peaches, including nectarines
Nectarines
Other
Plums and sloes
Plums
Sloes
Other fruit, fresh
Strawberries
Raspberries, blackberries, mulberries and loganberries
Raspberries
Other
Black-, white- or redcurrants and gooseberries
Blackcurrants
Redcurrants
Other
Cranberries, bilberries and other fruit of the genus Vaccinium
Cowberries, foxberries or mountain cranberries (fruit of the species Vaccinium vitis-idaea)
Fruit of the species Vaccinium myrtillus
Fruit of the species Vaccinium macrocarpon and Vaccinium corymbosum
Cranberries of the species Vaccinium macrocarpon, fresh, for use in the manufacture (excluding packing) of products of drink or food industries
Other
Other
Kiwifruit
Gold (Actinidia chinensis)
Other
Durians
Persimmons
Other
Tamarinds, cashew apples, lychees, jackfruit, sapodilla plums, passion fruit, carambola and pitahaya
Pitahaya (dragon fruit)
Other
Other
Pomegranates
Barbary figs
Medlars
Other
Fruit and nuts, uncooked or cooked by steaming or boiling in water, frozen, whether or not containing added sugar or other sweetening matter
Strawberries
Containing added sugar or other sweetening matter
With a sugar content exceeding 13|% by weight
Other
Other
Raspberries, blackberries, mulberries, loganberries, black-, white- or redcurrants and gooseberries
Containing added sugar or other sweetening matter
With a sugar content exceeding 13|% by weight
Raspberries
Other
Other
Raspberries
Other
Other
Raspberries
Blackcurrants
Redcurrants
Blackberries and mulberries
Other
Other
Containing added sugar or other sweetening matter
With a sugar content exceeding 13|% by weight
Tropical fruit and tropical nuts
Other
Cherries
Other
Other
Tropical fruit and tropical nuts
Other
Cherries
Other
Other
Fruit of the species Vaccinium myrtillus
Fruit of the species Vaccinium myrtilloides and Vaccinium angustifolium
Cherries
Sour cherries (Prunus cerasus)
Other
Tropical fruit and tropical nuts
Other
Boysenberries, frozen, not containing added sugar, not put up for retail sale
Pineapple (Ananas comosus), in pieces, frozen
Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter
Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter
Other
Fruit and nuts, provisionally preserved (for example, by sulphur dioxide gas, in brine, in sulphur water or in other preservative solutions), but unsuitable in that state for immediate consumption
Cherries
Other
Apricots; oranges
Oranges
Comminuted
Other
Apricots
Papaws (papayas)
Fruit of the species Vaccinium myrtillus
Guavas, mangoes, mangosteens, tamarinds, cashew apples, lychees, jackfruit, sapodillo plums, passion fruit, carambola, pitahaya and tropical nuts
Other
Fruit falling within heading and subheading Nos 0803, 0804 10, 0805 40, 0810 20 90, 0810 30 90, 0810 40 10, 0810 40 50, 0810 50, 0810 60, 0810 70 and 0810 90 75
Grapefruit (including pomelo), comminuted
Other
Other citrusfruit, comminuted
Other
Fruit, dried, other than that of headings|0801|to 0806; mixtures of nuts or dried fruits of this chapter
Apricots
Prunes
Apples
Other fruit
Peaches, including nectarines
Pears
Papaws (papayas)
Tamarinds, cashew apples, lychees, jackfruit, sapodillo plums, passion fruit, carambola and pitahaya
Other
Mixtures of nuts or dried fruits of this chapter
Mixtures of dried fruit, other than that of headings|0801|to 0806
Not containing prunes
Of papaws (papayas), tamarinds, cashew apples, lychees, jackfruit, sapodillo plums, passion fruit, carambola and pitahaya
Other
Containing prunes
Mixtures exclusively of nuts of headings|0801|and 0802
Of tropical nuts
Containing Brazil nuts in shell
Other
Other
Containing Brazil nuts in shell
Containing pistachios
Containing hazelnuts
Other
Other mixtures
Not containing prunes or figs
Containing Brazil nuts in shell
Containing pistachios
Containing hazelnuts
Other
Other
Containing Brazil nuts in shell
Containing figs
Containing pistachios
Containing hazelnuts
Other
Peel of citrus fruit or melons (including watermelons), fresh, frozen, dried or provisionally preserved in brine, in sulphur water or in other preservative solutions
COFFEE, TEA, MATÉ AND SPICES
Coffee, whether or not roasted or decaffeinated; coffee husks and skins; coffee substitutes containing coffee in any proportion
Coffee, not roasted
Not decaffeinated
Decaffeinated
Coffee, roasted
Not decaffeinated
Decaffeinated
Other
Coffee husks and skins
Coffee substitutes containing coffee
Tea, whether or not flavoured
Green tea (not fermented) in immediate packings of a content not exceeding 3|kg
Other green tea (not fermented)
Black tea (fermented) and partly fermented tea, in immediate packings of a content not exceeding 3|kg
Other black tea (fermented) and other partly fermented tea
Maté
Pepper of the genus Piper; dried or crushed or ground fruit of the genus Capsicum or of the genus Pimenta
Pepper
Neither crushed nor ground
Crushed or ground
Fruit of the genus Capsicum or of the genus Pimenta
Dried, neither crushed nor ground
Sweet peppers (Capsicum annuum)
Other
Crushed or ground
Capsicum annuum
Other
Vanilla
Neither crushed nor ground
Crushed or ground
Cinnamon and cinnamon-tree flowers
Neither crushed nor ground
Cinnamon (Cinnamomum zeylanicum Blume)
Other
Crushed or ground
Cloves (whole fruit, cloves and stems)
Neither crushed nor ground
Crushed or ground
Nutmeg, mace and cardamoms
Nutmeg
Neither crushed nor ground
Crushed or ground
Mace
Neither crushed nor ground
Crushed or ground
Cardamoms
Neither crushed nor ground
Crushed or ground
Seeds of anise, badian, fennel, coriander, cumin or caraway; juniper berries
Seeds of coriander
Neither crushed nor ground
Crushed or ground
Seeds of cumin
Neither crushed nor ground
Crushed or ground
Seeds of anise, badian, caraway or fennel; juniper berries
Neither crushed nor ground
Crushed or ground
Ginger, saffron, turmeric (curcuma), thyme, bay leaves, curry and other spices
Ginger
Neither crushed nor ground
Crushed or ground
Saffron
Neither crushed nor ground
Crushed or ground
Turmeric (curcuma)
Other spices
Mixtures referred to in note|1(b) to this chapter
Curry
Other
Neither crushed nor ground
Crushed or ground
Other
Fenugreek seed
Thyme
Neither crushed nor ground
Wild thyme (Thymus serpyllum L.)
Other
Crushed or ground
Bay leaves
Other
Neither crushed nor ground
Crushed or ground
CEREALS
Wheat and meslin
Durum wheat
Seed
High quality durum wheat
Medium quality durum wheat
Low quality durum wheat
Other
High quality durum wheat
Durum wheat with - a specific weight in kg/hl greater than or equal to|80, - a maximum of 20,0|% of grains which have lost their vitreous aspect, - a maximum of 10,0|% of matter which is not quality wheat grains of unimpaired quality of which a maximum of 7,0|% of broken and/or shrivelled grains, a maximum of 2,0|% grains damaged by pests, a maximum of 5,0|% grains affected with fusariosis and/or mottled grains, a maximum of 0,5|% of sprouted grains, - a maximum of 1,0|% of miscellaneous impurities (Schwarzbesatz), - a Hagberg falling number of a minimum of|250
Other
Medium quality durum wheat
Low quality durum wheat
Other
Seed
Spelt
Common wheat and meslin
Meslin
Common wheat
Other
Other
High quality common wheat
With: - a specific weight in kg/hl greater than or equal to|78, - a maximum of 10,0|% of matter which is not quality wheat grains of unimpaired quality, of which a maximum of 7,0|% of broken and/or shrivelled grains, a maximum of 2,0|% grains damaged by pests, a maximum of 0,5|% sprouted grains, - a maximum of 1,0|% of miscellaneous impurities (Schwarzbesatz), - a Hagberg falling number of a minimum of|230, - a protein content (13,5|% moisture content) of a minimum of|14,6|%
Other
Medium quality common wheat
Low quality common wheat
Spelt
Meslin
Other
Rye
Seed
Other
Barley
Seed
Other
For the manufacture of malt
with the following quality criteria: - specific weight 60,5 kg/hl or more, - damaged grains 1|% or less, - moisture content 13,5|% or less, - sound, fair and merchantable barley 96|% or more, to be used for the manufacture of beer aged in vats containing beechwood
Other
Other
Oats
Seed
Other
Maize (corn)
Seed
Hybrid
Three-cross hybrids
Simple hybrids
Other
Other
Other
Flint maize of specific weight equal to or more than 75,5|kg/hl, with a vitreous grain content equal to or more than 92% by weight and with a maximum flotation index 26 and intended for processing
Other
Rice
Rice in the husk (paddy or rough)
For sowing
Other
Parboiled
Round grain
Medium grain
Long grain
Of a length/width ratio greater than 2|but less than 3
Of a length/width ratio equal to or greater than 3
Other
Round grain
Medium grain
Long grain
Of a length/width ratio greater than 2|but less than 3
Of a length/width ratio equal to or greater than 3
Husked (brown) rice
Parboiled
Round grain
Medium grain
Long grain
Of a length/width ratio greater than 2|but less than 3
Of a length/width ratio equal to or greater than 3
Basmati rice
Of the varieties Basmati 370, Basmati 386 (India), Type-3 (Dehradun India), Taraori Basmati (HBC-19 India), Basmati 217 (India), Ranbir Basmati (India), Kernel (Basmati Pakistan), Pusa Basmati, Super Basmati
Other
Other
Other
Round grain
Medium grain
Long grain
Of a length/width ratio greater than 2|but less than 3
Of a length/width ratio equal to or greater than 3
Basmati rice
Of the varieties Basmati 370, Basmati 386 (India), Type-3 (Dehradun India), Taraori Basmati (HBC-19 India), Basmati 217 (India), Ranbir Basmati (India), Kernel (Basmati Pakistan), Pusa Basmati, Super Basmati
Other
Other
Semi-milled or wholly milled rice, whether or not polished or glazed
Semi-milled rice
Parboiled
Round grain
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Medium grain
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Long grain
Of a length/width ratio greater than 2|but less than 3
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Of a length/width ratio equal to or greater than 3
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Other
Round grain
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Medium grain
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Long grain
Of a length/width ratio greater than 2|but less than 3
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Of a length/width ratio equal to or greater than 3
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Wholly milled rice
Parboiled
Round grain
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Medium grain
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Long grain
Of a length/width ratio greater than 2|but less than 3
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Of a length/width ratio equal to or greater than 3
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Other
Round grain
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Medium grain
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Long grain
Of a length/width ratio greater than 2|but less than 3
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Of a length/width ratio equal to or greater than 3
In immediate packings of a net content not exceeding 5|kg
In immediate packings of a net content exceeding 5|kg but not exceeding 20|kg
Other
Broken rice
For the manufacture of food preparations of subheading 1901 10
other
Grain sorghum
Seed
Hybrids
Other
Other
Buckwheat, millet and canary seed; other cereals
Buckwheat
Millet
Seed
Other
Canary seed
Fonio (Digitaria spp.)
Quinoa (Chenopodium quinoa)
Triticale
Other cereals
PRODUCTS OF THE MILLING INDUSTRY; MALT; STARCHES; INULIN; WHEAT GLUTEN
Wheat or meslin flour
Wheat flour
Of durum wheat
Of common wheat and spelt
Meslin flour
Cereal flours other than of wheat or meslin
Maize (corn) flour
Of a fat content not exceeding 1,5|% by weight
Other
Other
Barley flour
Oat flour
Rice flour
Rye flour
Other
Cereal groats, meal and pellets
Groats and meal
Of wheat
Durum wheat
Common wheat and spelt
Of maize (corn)
Of a fat content not exceeding 1,5|% by weight
Other
Of other cereals
Of rye or barley
Of barley
Other
Of oats
Of rice
Other
Pellets
Of rye or barley
Of rye
Of barley
Of oats
Of maize
Of rice
Of wheat
Other
Cereal grains otherwise worked (for example, hulled, rolled, flaked, pearled, sliced or kibbled), except rice of heading|1006; germ of cereals, whole, rolled, flaked or ground
Rolled or flaked grains
Of oats
Rolled
Flaked
Of other cereals
Of wheat
Of rye
Of maize
Of barley
Rolled
Flaked
Other
Flaked rice
Other
Other worked grains (for example, hulled, pearled, sliced or kibbled)
Of oats
Hulled (shelled or husked), whether or not sliced or kibbled
Pearled
Other
Of maize (corn)
Hulled (shelled or husked), whether or not sliced or kibbled; pearled
Other
Of other cereals
Of barley
Hulled (shelled or husked), whether or not sliced or kibbled
Pearled
Other
Other
Hulled (shelled or husked), whether or not sliced or kibbled
Pearled
Not otherwise worked than kibbled
Of wheat
Of rye
Other
Other
Of wheat
Of rye
Other
Germ of cereals, whole, rolled, flaked or ground
Of wheat
Of other cereals
Flour, meal, powder, flakes, granules and pellets of potatoes
Flour, meal and powder
Flakes, granules and pellets
Flour, meal and powder of the dried leguminous vegetables of heading|0713, of sago or of roots or tubers of heading|0714|or of the products of Chapter|8
Of the dried leguminous vegetables of heading|0713
Of sago or of roots or tubers of heading|0714
Denatured
Other
Of the products of Chapter|8
Of bananas
Other
Watermelon (egusi, Citrullus spp.) seeds and derived products
Of hazelnuts
Of pistachios
Other
Malt, whether or not roasted
Not roasted
Of wheat
In the form of flour
Other
Other
In the form of flour
Other
Roasted
Starches; inulin
Starches
Wheat starch
Maize (corn) starch
Potato starch
Manioc (cassava) starch
Other starches
Rice starch
Other
Inulin
Wheat gluten, whether or not dried
OIL SEEDS AND OLEAGINOUS FRUITS; MISCELLANEOUS GRAINS, SEEDS AND FRUIT; INDUSTRIAL OR MEDICINAL PLANTS; STRAW AND FODDER
Soya beans, whether or not broken
Seed
Other
Groundnuts, not roasted or otherwise cooked, whether or not shelled or broken
Seed
Other
In shell
Shelled, whether or not broken
Copra
Linseed, whether or not broken
For sowing
Other
Rape or colza seeds, whether or not broken
Low erucic acid rape or colza seeds
For sowing
Other
Other
Sunflower seeds, whether or not broken
For sowing
Other
Shelled; in grey-and-white-striped shell
Other
Other oil seeds and oleaginous fruits, whether or not broken
Palm nuts and kernels
Cotton seeds
Seed
Other
Castor oil seeds
Sesamum seeds
Seed
Other
Mustard seeds
Seed
Other
Safflower (Carthamus tinctorius) seeds
Melon seeds
Watermelon (egusi, Citrullus spp.) seeds and derived products
Other
Other
Poppy seeds
Seed
Other
Other
Seed
Hemp seeds
Other
Other
Hemp seeds
Other
Pumpkin seeds (Cucurbita pepo L. convar. citrullinia Greb. var. styriaca and Cucurbita pepo L. var. oleifera Pietsch)
Other
Flours and meals of oil seeds or oleaginous fruits, other than those of mustard
Of soya beans
Other
Seeds, fruit and spores, of a kind used for sowing
Sugar beet seeds
Seeds of forage plants
Lucerne (alfalfa) seeds
Clover (Trifolium spp.) seeds
Red clover (Trifolium pratense L.)
Other
Fescue seeds
Meadow fescue (Festuca pratensis Huds.) seeds
Red fescue (Festuca rubra L.) seeds
Other
Kentucky blue grass (Poa pratensis L.) seeds
Ryegrass (Lolium multiflorum Lam., Lolium perenne L.) seeds
Italian ryegrass (including westerwolds) (Lolium multiflorum Lam.)
Perennial ryegrass (Lolium perenne L.)
Other
Timothy grass seed; vetch seed; seeds of the genus Poa (Poa palustris L., Poa trivialis L.); cocksfoot grass (Dactylis glomerata L.); bent grass (Agrostis)
Lupine seed
Fodder beet seed (Beta vulgaris var. alba)
Other
Seeds of herbaceous plants cultivated principally for their flowers
Other
Vegetable seeds
Salad beet seed or beetroot seed (Beta vulgaris var. conditiva)
Other
Seeds
Other
Other
Forest-tree seeds
Other
Seeds of plants cultivated principally for their flowers, other than those of subheading|1209|30
Other
Seeds
Other
Hop cones, fresh or dried, whether or not ground, powdered or in the form of pellets; lupulin
Hop cones, neither ground nor powdered nor in the form of pellets
In individual packages where the weight does not exceed 1 kilogram, destined for sale to private individuals for their own use, for scientific and technical experiments, or for fairs covered by the special customs arrangements for fairs, with the description, weight and final destination indicated on the packaging
Other
Hop cones, ground, powdered or in the form of pellets; lupulin
Hop cones, ground, powdered or in the form of pellets, with higher lupulin content; lupulin
Hop powder
In individual packages where the weight does not exceed 1 kilogram, destined for sale to private individuals for their own use, for scientific and technical experiments, or for fairs covered by the special customs arrangements for fairs, with the description, weight and final destination indicated on the packaging
Other
Other
Other
Hop powder
In individual packages where the weight does not exceed 1 kilogram, destined for sale to private individuals for their own use, for scientific and technical experiments, or for fairs covered by the special customs arrangements for fairs, with the description weight and final destination indicated on the packaging
Other
Other
Plants and parts of plants (including seeds and fruits), of a kind used primarily in perfumery, in pharmacy or for insecticidal, fungicidal or similar purposes, fresh or dried, whether or not cut, crushed or powdered
Ginseng roots
Coca leaf
Poppy straw
Other
Of the genus Ephedra
Tonquin beans
Other
Curry leaves (Bergera koenigii, Syn.: Murraya koenigii)
Basil (holy, sweet) (fresh or chilled)
Mint (fresh or chilled)
Other
Locust beans, seaweeds and other algae, sugar beet and sugar cane, fresh, chilled, frozen or dried, whether or not ground; fruit stones and kernels and other vegetable products (including unroasted chicory roots of the variety Cichorium intybus sativum) of a kind used primarily for human consumption, not elsewhere specified or included
Seaweeds and other algae
Fit for human consumption
Other
Other
Sugar beet
Dried, whether or not ground
Other
Locust beans (carob)
Sugar cane
Chicory roots
Other
Locust bean seeds
Not decorticated, crushed or ground
Other
Other
Bee pollen
Other
Cereal straw and husks, unprepared, whether or not chopped, ground, pressed or in the form of pellets
Straw
Other
Swedes, mangolds, fodder roots, hay, lucerne (alfalfa), clover, sainfoin, forage kale, lupines, vetches and similar forage products, whether or not in the form of pellets
Lucerne (alfalfa) meal and pellets
Other
Mangolds, swedes and other fodder roots
Other
Hay
Other
LAC; GUMS, RESINS AND OTHER VEGETABLE SAPS AND EXTRACTS
Lac; natural gums, resins, gum-resins and oleoresins (for example, balsams)
Gum Arabic
Other
Vegetable saps and extracts; pectic substances, pectinates and pectates; agar-agar and other mucilages and thickeners, whether or not modified, derived from vegetable products
Vegetable saps and extracts
Opium
Of liquorice
Of hops
Saps
Extracts
In individual packages where the weight does not exceed|300|g, destined for sale to private individuals for their own use, for scientific and technical experiments, or for fairs covered by the special customs arrangements for fairs, with the description, weight anf final utilization indicated on the packaging
Other
Other
Vanilla oleoresin
Of plants of the genus Ephedra
Other
Pectic substances, pectinates and pectates
Dry
Containing less than 5% by weight of added sugar
Pectates
Other
Containing 5% or more by weight of added sugar
Pectates
Other
Other
Containing less than 5% by weight of added sugar
Pectates
Other
Containing 5% or more by weight of added sugar
Pectates
Other
Mucilages and thickeners, whether or not modified, derived from vegetable products
Agar-agar
Mucilages and thickeners, whether or not modified, derived from locust beans, locust bean seeds or guar seeds
Of locust beans or locust bean seeds
Of guar seeds
Intended for animal or human consumption
Consigned from India
Other
Other
Other
VEGETABLE PLAITING MATERIALS; VEGETABLE PRODUCTS NOT ELSEWHERE SPECIFIED OR INCLUDED
Vegetable materials of a kind used primarily for plaiting (for example, bamboos, rattans, reeds, rushes, osier, raffia, cleaned, bleached or dyed cereal straw, and lime bark)
Bamboos
Rattans
Other
Vegetable products not elsewhere specified or included
Cotton linters
Other
Betel leaves (Piper betle L.)
Other
ANIMAL OR VEGETABLE FATS AND OILS AND THEIR CLEAVAGE PRODUCTS; PREPARED EDIBLE FATS; ANIMAL OR VEGETABLE WAXES
Pig fat (including lard) and poultry fat, other than that of heading|0209|or 1503
Lard
For industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other pig fat
For industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
Fats of bovine animals, sheep or goats, other than those of heading|1503
Tallow
For industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
For industrial uses other than the manufacture of foodstuffs for human consumption
Other
Lard stearin, lard oil, oleostearin, oleo-oil and tallow oil, not emulsified or mixed or otherwise prepared
Lard stearin and oleostearin
For industrial uses
Other
Tallow oil for industrial uses other than the manufacture of foodstuffs for human consumption
Other
Fats and oils and their fractions, of fish or marine mammals, whether or not refined, but not chemically modified
Fish-liver oils and their fractions
Of a vitamin|A content not exceeding 2|500|International Units per gram
Other
Of halibut
Other
Fats and oils and their fractions, of fish, other than liver oils
Solid fractions
In immediate packings of a net capacity of 1|kg or less
Other
Other
Fats and oils and their fractions, of marine mammals
Solid fractions
Of whale and sperm whale
Other
In immediate packings of a net capacity of 1|kg or less
Other
Other
Wool grease and fatty substances derived therefrom (including lanolin)
Wool grease, crude
Other
Other animal fats and oils and their fractions, whether or not refined, but not chemically modified
Soya-bean oil and its fractions, whether or not refined, but not chemically modified
Crude oil, whether or not degummed
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Groundnut oil and its fractions, whether or not refined, but not chemically modified
Crude oil
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Olive oil and its fractions, whether or not refined, but not chemically modified
Virgin
Lampante olive oil
Other
Other
Other oils and their fractions, obtained solely from olives, whether or not refined, but not chemically modified, including blends of these oils or fractions with oils or fractions of heading|1509
Crude oils
Other
Palm oil and its fractions, whether or not refined, but not chemically modified
Crude oil
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
Solid fractions
In immediate packings of a net content not exceeding 1|kg
Other
For the manufacture of: -|industrial monocarboxylic fatty acids of subheading 3823|19|10, -|methyl esters of fatty acids of heading 2915|or 2916, -|fatty alcohols of subheadings 2905|17, 2905|19|and 3823|70|used for the manufacture of cosmetics, washing products or pharmaceutical products, -|fatty alcohols of subheading 2905|16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products, -|stearic acid of subheading 3823|11|00, -|goods of heading 3401, or -|fatty acids with high purity of heading 2915
Other
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
For the manufacture of: -|industrial monocarboxylic fatty acids of subheading 3823|19|10, -|methyl esters of fatty acids of heading 2915|or 2916, -|fatty alcohols of subheadings 2905|17, 2905|19|and 3823|70|used for the manufacture of cosmetics, washing products or pharmaceutical products, -|fatty alcohols of subheading 2905|16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products, -|stearic acid of subheading 3823|11|00, -|goods of heading 3401, or -|fatty acids with high purity of heading 2915
Other
Other
Sunflower-seed, safflower or cotton-seed oil and fractions thereof, whether or not refined, but not chemically modified
Sunflower-seed or safflower oil and fractions thereof
Crude oil
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Sunflower-seed oil
Safflower oil
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Refined safflower oil (Safloröl, CAS|RN|8001-23-8) for|use in the manufacture of -|conjugated linoleic acid of heading 3823|or -|ethyl- or methyl esters of linoleic acid of heading 2916
Other
Other
Sunflower-seed oil
Safflower oil
Cotton-seed oil and its fractions
Crude oil, whether or not gossypol has been removed
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Coconut (copra), palm kernel or babassu oil and fractions thereof, whether or not refined, but not chemically modified
Coconut (copra) oil and its fractions
Crude oil
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
for the manufacture of: -|industrial monocarboxylic fatty acids of subheading 3823|19|10, -|methyl esters of fatty acids of heading 2915|or 2916, -|fatty alcohols of subheadings 2905|17, 2905|19|and 3823|70|used for the manufacture of cosmetics, washing products or pharmaceutical products, -|fatty alcohols of subheading 2905|16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products, -|stearic acid of subheading 3823|11|00, -|goods of heading 3401, or -|fatty acids with high purity of heading 2915
Other
Other
In immediate packings of a net content not exceeding 1|kg
Other
Other
Solid fractions
In immediate packings of a net content not exceeding 1|kg
Other
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
For the manufacture of: -|industrial monocarboxylic fatty acids of subheading 3823|19|10, -|methyl esters of fatty acids of heading 2915|or 2916, -|fatty alcohols of subheadings 2905|17, 2905|19|and 3823|70|used for the manufacture of cosmetics, washing products or pharmaceutical products, -|fatty alcohols of subheading 2905|16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products, -|stearic acid of subheading 3823|11|00, -|goods of heading 3401, or -|fatty acids with high purity of heading 2915
Other
Other
In immediate packings of a net content not exceeding 1|kg
Other
Palm kernel or babassu oil and fractions thereof
Crude oil
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Palm kernel oil for the manufacture of: -|industrial monocarboxylic fatty acids of subheading 3823|19|10, -|methyl esters of fatty acids of heading 2915|or 2916, -|fatty alcohols of subheadings 2905|17, 2905|19|and 3823|70|used for the manufacture of cosmetics, washing products or pharmaceutical products, -|fatty alcohols of subheading 2905|16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products, -|stearic acid of subheading 3823|11|00, -|goods of heading 3401, or -|fatty acids with high purity of heading 2915
Other
Other
In immediate packings of a net content not exceeding 1|kg
Other
Other
Solid fractions
In immediate packings of a net content not exceeding 1|kg
Other
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Palm kernel oil for the manufacture of: -|industrial monocarboxylic fatty acids of subheading 3823|19|10, -|methyl esters of fatty acids of heading 2915|or 2916, -|fatty alcohols of subheadings 2905|17, 2905|19|and 3823|70|used for the manufacture of cosmetics, washing products or pharmaceutical products, -|fatty alcohols of subheading 2905|16, pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products, -|stearic acid of subheading 3823|11|00, -|goods of heading 3401, or -|fatty acids with high purity of heading 2915
Other
Other
In immediate packings of a net content not exceeding 1|kg
Other
Rape, colza or mustard oil and fractions thereof, whether or not refined, but not chemically modified
Low-erucic-acid rape or colza oil and its fractions
Crude oil
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
Crude oil
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other fixed vegetable fats and oils (including jojoba oil) and their fractions, whether or not refined, but not chemically modified
Linseed oil and its fractions
Crude oil
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Maize (corn) oil and its fractions
Crude oil
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Castor oil and its fractions
For the production of aminoundecanoic acid for use in the manufacture of synthetic textile fibres or of artificial plastic materials
Other
Sesame oil and its fractions
Crude oil
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
Tung oil; jojoba and oiticica oils; myrtle wax and Japan wax; their fractions
Tobacco-seed oil and its fractions
Crude oil
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Other oils and their fractions
Crude oils
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Solid, in immediate packings of a net content not exceeding 1|kg
Solid, other; fluid
Other
For technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Solid, in immediate packings of a net content not exceeding 1|kg
Solid, other; fluid
Hazelnut oil
Vegetable oil, refined, containing by weight 35|% or more but not more than 50|% of arachidonic acid or 35|% or more but not more than 50|% of docosahexaenoic acid
Other
Animal or vegetable fats and oils and their fractions, partly or wholly hydrogenated, inter-esterified, re-esterified or elaidinised, whether or not refined, but not further prepared
Animal fats and oils and their fractions
In immediate packings of a net content not exceeding 1|kg
Of fish and of marine mammals
Other
Other
Of fish and of marine mammals
Other
Vegetable fats and oils and their fractions
Hydrogenated castor oil, so called 'opal-wax'
Other
In immediate packings of a net content not exceeding 1|kg
Other
Colza, linseed, rapeseed, sunflower-seed, illipe, karite, makore, touloucouna or babassu oils, for technical or industrial uses other than the manufacture of foodstuffs for human consumption
Other
Groundnut, cotton-seed, soya-bean or sunflower-seed oils; other oils containing less than 50|% by weight of free fatty acids and excluding palm kernel, illipe, coconut, colza, rapeseed or copaiba oils
Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process
Other
Other
Blends containing by weight more than 20% of fatty-acid mono-alkyl esters and/or paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Consigned from Canada
Other
Blends containing by weight 20% or less of fatty-acid mono-alkyl esters and/or paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Other
Margarine; edible mixtures or preparations of animal or vegetable fats or oils or of fractions of different fats or oils of this chapter, other than edible fats or oils or their fractions of heading|1516
Margarine, excluding liquid margarine
Containing, by weight, more than 10|% but not more than 15|% of milkfats
Other
Containing, by weight, not more than 10|% of milk fats
Other
Other
Containing, by weight, more than 10|% but not more than 15|% of milkfats
Other
Fixed vegetable oils, fluid, mixed
Edible mixtures or preparations of a kind used as mould-release preparations
Other
Vegetable oil, refined, containing by weight 25|% or more but not more than 50|% arachidonic acid or|12|% or more but not more than|65|% docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO)
Other
Animal or vegetable fats and oils and their fractions, boiled, oxidised, dehydrated, sulphurised, blown, polymerised by heat in vacuum or in inert gas or otherwise chemically modified, excluding those of heading|1516; inedible mixtures or preparations of animal or vegetable fats or oils or of fractions of different fats or oils of this chapter, not elsewhere specified or included
Linoxyn
Fixed vegetable oils, fluid, mixed, for technical or industrial uses other than the manufacture of foodstuffs for human consumption
Crude
Other
Other
Animal or vegetable fats and oils and their fractions, boiled, oxidised, dehydrated, sulphurised, blown, polymerised by heat in vacuum or in inert gas or otherwise chemically modified, excluding those of heading|1516
Blends containing by weight more than 20% of fatty-acid mono-alkyl esters and/or paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Consigned from Canada
Other
Blends containing by weight 20% or less of fatty-acid mono-alkyl esters and/or paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Other
Other
Inedible mixtures or preparations of animal or of animal and vegetable fats and oils and their fractions
Blends containing fatty-acid mono-alkyl esters and/or paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Other
Other
Blends containing by weight more than 20% of fatty-acid mono-alkyl esters and/or paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Consigned from Canada
Other
Blends containing by weight 20% or less of fatty-acid mono-alkyl esters and/or paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Other
Glycerol, crude; glycerol waters and glycerol lyes
Vegetable waxes (other than triglycerides), beeswax, other insect waxes and spermaceti, whether or not refined or coloured
Vegetable waxes
Other
Spermaceti, whether or not refined or coloured
Beeswax and other insect waxes, whether or not refined or coloured
Raw
Other
Degras; residues resulting from the treatment of fatty substances or animal or vegetable waxes
Degras
Residues resulting from the treatment of fatty substances or animal or vegetable waxes
Containing oil having the characteristics of olive oil
Soapstocks
Other
Other
Oil foots and dregs; soapstocks
Other
PREPARATIONS OF MEAT, OF FISH OR OF CRUSTACEANS, MOLLUSCS OR OTHER AQUATIC INVERTEBRATES
Sausages and similar products, of meat, meat offal or blood; food preparations based on these products
Of liver
Of animals of headings 0101 to 0104, excluding wild boars
Other
Other
Sausages, dry or for spreading, uncooked
Of animals of headings 0101 to 0104, excluding wild boars
Other
Other
Of animals of headings 0101 to 0104, excluding wild boars
Other
Other prepared or preserved meat, meat offal or blood
Homogenised preparations
Of liver of any animal
Goose or duck liver
Other
Of poultry of heading|0105
Of turkeys
Containing 57|% or more by weight of poultry meat or offal
Containing exclusively uncooked turkey meat
Other
Other
Containing 25|% or more but less than 57|% by weight of poultry meat or offal
Other
Of fowls of the species Gallus domesticus
Containing 57|% or more by weight of poultry meat or offal
Uncooked
Other
Containing 25|% or more but less than 57|% by weight of poultry meat or offal
Uncooked
Other
Other
Uncooked
Other
Other
Containing 57|% or more by weight of poultry meat or offal
Uncooked
Other
Other
Processed meat, containing 25% or more by weight of poultry meat or offal
Other
Of swine
Hams and cuts thereof
Of domestic swine
Other
Shoulders and cuts thereof
Of domestic swine
Other
Other, including mixtures
Of domestic swine
Containing by weight 80|% or more of meat or meat offal, of any kind, including fats of any kind or origin
Loins (excluding collars) and cuts thereof, including mixtures of loins or hams
Collars and cuts thereof, including mixtures of collars and shoulders
Other mixtures containing hams (legs), shoulders, loins or collars, and cuts thereof
Other
Pork neck, dried in air, seasoned or not, whole, in pieces or thinly sliced
Other
Containing by weight 40|% or more but less than 80|% of meat or meat offal, of any kind, including fats of any kind or origin
Containing by weight less than 40|% of meat or meat offal, of any kind, including fats of any kind or origin
Other
Of bovine animals
Uncooked; mixtures of cooked meat or offal and uncooked meat or offal
Other
Corned beef, in airtight containers
Other
Other, including preparations of blood of any animal
Preparations of blood of any animal
Other
Of game or rabbit
Other
Containing meat or meat offal of domestic swine
Other
Containing bovine meat or offal
Uncooked; mixtures of cooked meat or offal and uncooked meat or offal
Other
Other
Of sheep
Of goats
Other
Extracts and juices of meat, fish or crustaceans, molluscs or other aquatic invertebrates
In immediate packings of a net content of 1|kg or less
Other
Prepared or preserved fish; caviar and caviar substitutes prepared from fish eggs
Fish, whole or in pieces, but not minced
Salmon
Atlantic salmon (Salmo salar)
Other
Herring
Fillets, raw, merely coated with batter or breadcrumbs, whether or not pre-fried in oil, frozen
Of the species Clupea harengus
Other
Other
In airtight containers
Of the species Clupea harengus
Spiced and/or vinegar-cured, in brine
Other
Other
Spiced and/or vinegar-cured, in brine
Other
Other
Spiced and/or vinegar-cured, in brine
Preserved in barrels of at least 70|kg net drained weight, for processing
Other
Of the species Clupea harengus
Other
Sardines, sardinella and brisling or sprats
Sardines
In olive oil
Of the species Sardina pilchardus
Other
Other
Of the species Sardina pilchardus
Other
Other
Fillets, raw, merely coated with batter or breadcrumbs, whether or not prefried in oil, deepfrozen
Other
Brisling or sprats (Sprattus sprattus)
In airtight cans
Other
Other
Tuna, skipjack and bonito (Sarda spp.)
Tuna and skipjack
Skipjack
In vegetable oil
Other
Fillets known as 'loins'
For processing
Other
Other
Yellowfin tuna (Thunnus albacares)
In vegetable oil
Other
Fillets known as 'loins'
For processing
Other
Other
Other
In vegetable oil
Bluefin tunas (Thunnus thynnus)
Atlantic bigeye tuna (Thunnus obesus)
Other
Other
Fillets known as 'loins'
of Bluefin tunas (thunnus thynnus)
For processing
Other
Of Atlantic bigeye tuna (Thunnus obesus)
For processing
Other
Other
For processing
Other
Other
Bluefin tunas (Thunnus thynnus)
Atlantic bigeye tuna (Thunnus obesus)
Other
Bonito (Sarda spp.)
Mackerel
Of the species Scomber scombrus and Scomber japonicus
Fillets
Of the species Scomber scombrus
Of the species Scomber japonicus
Other
Of the species Scomber scombrus
Of the species Scomber japonicus
Of the species Scomber australasicus
Anchovies
Eels
Other
Salmonidae, other than salmon
Trout (Oncorhynchus mykiss)
Other
Fish of the genus Euthynnus, other than skipjack (Euthynnus (Katsuwonus) pelamis)
Fillets known as 'loins'
Other
Fish of the species Orcynopsis unicolor
Other
Fillets, raw, merely coated with batter or breadcrumbs, whether or not pre-fried in oil, frozen
Of swordfish (Xiphias gladius)
Other
Other
Cod (Gadus morhua, Gadus ogac, Gadus macrocephalus)
Coalfish (Pollachius virens)
Preserved smoked coalfish
Other
Hake (Merluccius spp., Urophycis spp.)
Alaska pollack (Theragra chalcogramma) and pollack (Pollachius pollachius)
Other
Swordfish (Xiphias gladius)
Mackerel (Scomber colias)
Frigate tuna, Frigate mackerel (Auxis thazard, Auxis rochei)
Other
Other prepared or preserved fish
Preparations of surimi
Other
Of salmon
Atlantic salmon (Salmo salar)
Other
Of Salmonidae, other than salmon
Trout (Oncorhynchus mykiss)
Other
Of anchovies
Of sardines, bonito, mackerel of the species Scomber scombrus and Scomber japonicus, fish of the species Orcynopsis unicolor
Of sardines
Of the species Sardina pilchardus
Other
Of bonito (Sarda s.p.p.)
Of mackerel of the species Scomber scombrus
Of mackerel of the species Scomber japonicus
Other
Of tuna, skipjack or other fish of the genus Euthynnus
of Bluefin tunas (thunnus thynnus)
Preserved
Other
Of Atlantic bigeye tuna (Thunnus obesus)
Preserved
Other
Skipjack (Katsuwonus pelamis)
Preserved
Other
Other
Preserved
Other
Of other fish
Of herring
Of the species Clupea harengus
Other
Preserved smoked coalfish
Brisling or sprats (Sprattus sprattus)
In airtight cans
Οther
of mackerel (Scomber australasicus)
Lamprey
Swordfish (Xiphias gladius)
Other
Caviar and caviar substitutes
Caviar
Caviar substitutes
Hard fish roes, washed, cleaned of adherent organs and simply salted or in brine, for processing of caviar substitutes
Other
Crustaceans, molluscs and other aquatic invertebrates, prepared or preserved
Crab
In airtight cans
Other
Shrimps and prawns
Not in airtight containers
In immediate packings of a net content not exceeding 2|kg
Of the "Crangon" variety
shelled and frozen
Other
Shrimps and prawns of the species Pandalus borealis, shelled, boiled and frozen, but not otherwise prepared
Shrimps and prawns of the species Pandalus montagui, shelled, boiled and frozen, but not otherwise prepared
Other
Shelled
Frozen
Other
Other
Other
Of the "Crangon" variety
shelled and frozen
Other
Shrimps and prawns of the species Pandalus borealis
shelled, boiled and frozen, but not otherwise prepared
cooked and peeled for processing
Other
Shrimps and prawns of the species Pandalus jordani
Cooked and peeled for processing
Other
Frozen
Other
Shrimps and prawns of the species Pandalus montagui
shelled, boiled and frozen, but not otherwise prepared
cooked and peeled for processing
Other
Other
Shelled
Frozen
Other
Other
Other
Of the "Crangon" variety
shelled and frozen
Other
Shrimps and prawns of the species Pandalus borealis, shelled, boiled and frozen, but not otherwise prepared
Shrimps and prawns of the species Pandalus montagui, shelled, boiled and frozen, but not otherwise prepared
Shrimps and prawns of the species Pandalus borealis, cooked and peeled for processing
Shrimps and prawns of the species Pandalus montagui, cooked and peeled for processing
Shrimps and prawns of the species Pandalus jordani, cooked and peeled for processing
Other
Shelled
Frozen
Other
Other
Lobster
Lobster meat, cooked, for the manufacture of lobster butter or of lobster pastes, pâtés, soups or sauces
Other
Frozen lobster (Homarus americanus), in pieces, cooked
Frozen lobster meat (Homarus americanus), cooked
Prepared meals of lobster meat (Homarus americanus), including meals ready for consumption
Other
Other crustaceans
Norway lobsters (Nephrops norvegicus)
Freshwater crayfish cooked with dill, frozen
Other
Molluscs
Oysters
Scallops, including queen scallops
Coquilles St. Jacques (Pecten maximus)
Other
Mussels
In airtight containers
Of the species Mytilus spp. or Perna spp.
Frozen mussels (Mytilus edulis), cooked, whether or not in shell
Prepared or preserved mussels (Mytilus edulis), and meals containing mussels (Mytilus edulis), including meals ready for consumption
Other
Other
Other
Of the species Mytilus spp. or Perna spp.
Frozen mussels (Mytilus edulis), cooked, whether or not in shell
Prepared or preserved mussels (Mytilus edulis), and meals containing mussels (Mytilus edulis), including meals ready for consumption
Other
Other
Cuttlefish and squid
Octopus
Clams, cockles and arkshells
Abalone
Snails, other than sea snails
Other
Common whelk (Buccinum Undatum)
Other
Other aquatic invertebrates
Sea cucumbers
Sea urchins
Jellyfish
Other
SUGARS AND SUGAR CONFECTIONERY
Cane or beet sugar and chemically pure sucrose, in solid form
Raw sugar not containing added flavouring or colouring matter
Beet sugar
For refining
Other
Cane sugar specified in subheading note|2|to this chapter
For refining
Other
Other cane sugar
For refining
Other
Other
Containing added flavouring or colouring matter
Other
White sugar
Other
Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel
Lactose and lactose syrup
Containing by weight 99|% or more lactose, expressed as anhydrous lactose, calculated on the dry matter
Other
Maple sugar and maple syrup
Maple sugar in solid form, containing added flavouring or colouring matter
Other
Glucose and glucose syrup, not containing fructose or containing in the dry state less than 20|% by weight of fructose
Isoglucose
Other
In the form of white crystalline powder, whether or not agglomerated
Containing in the dry state, 99|% or more by weight of glucose
Other
Other
Containing in the dry state, 99|% or more by weight of glucose
Other
Glucose and glucose syrup, containing in the dry state at least 20|% but less than 50|% by weight of fructose, excluding invert sugar
Isoglucose
Other
Chemically pure fructose
Other fructose and fructose syrup, containing in the dry state more than 50|% by weight of fructose, excluding invert sugar
Isoglucose
Inulin syrup
Other
Other, including invert sugar and other sugar and sugar syrup blends containing in the dry state 50|% by weight of fructose
Chemically pure maltose
For feeding purpose
Other
Isoglucose
Maltodextrine and maltodextrine syrup
Caramel
Containing 50|% or more by weight of sucrose in the dry matter
Other
In the form of powder, whether or not agglomerated
Other
Inulin syrup
Other
Molasses resulting from the extraction or refining of sugar
Cane molasses
Other
Sugar confectionery (including white chocolate), not containing cocoa
Chewing gum, whether or not sugar-coated
Containing less than 60|% by weight of sucrose (including invert sugar expressed as sucrose)
Containing 60|% or more by weight of sucrose (including invert sugar expressed as sucrose)
Other
Liquorice extract containing more than 10|% by weight of sucrose but not containing other added substances
White chocolate
Other
Pastes, including marzipan, in immediate packings of a net content of 1|kg or more
Throat pastilles and cough drops
Sugar-coated (panned) goods
Other
Gum confectionery and jelly confectionery, including fruit pastes in the form of sugar confectionery
Boiled sweets, whether or not filled
Toffees, caramels and similar sweets
Other
Compressed tablets
Other
Containing less than 70|% by weight of sucrose (including invert sugar expressed as sucrose)
Marshmallows, containing 45 % or less by weight of sugar (including invert sugar expressed as sucrose)
Other
Containing|70|% or more by weight of sucrose (including invert sugar expressed as sucrose)
Halva and Loukhum
Other
COCOA AND COCOA PREPARATIONS
Cocoa beans, whole or broken, raw or roasted
Cocoa shells, husks, skins and other cocoa waste
Cocoa paste, whether or not defatted
Not defatted
Wholly or partly defatted
Cocoa butter, fat and oil
Cocoa powder, not containing added sugar or other sweetening matter
Chocolate and other food preparations containing cocoa
Cocoa powder, containing added sugar or other sweetening matter
Containing no sucrose or containing less than 5|% by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
Containing 5|% or more but less than 65|% by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
Containing 65|% or more but less than 80|% by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
Containing 70|% or more by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
Other
Containing 80|% or more by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
Other preparations in blocks, slabs or bars weighing more than 2|kg or in liquid, paste, powder, granular or other bulk form in containers or immediate packings, of a content exceeding 2|kg
Containing 31|% or more by weight of cocoa butter or containing a combined weight of 31|% or more of cocoa butter and milkfat
Containing a combined weight of 25|% or more, but less than 31|% of cocoa butter and milkfat
Other
Containing 18|% or more by weight of cocoa butter
Chocolate milk crumb
Chocolate flavour coating
Containing less than 70|% by weight of sucrose (including invert sugar expressed as sucrose)
Containing|70|% or more by weight of sucrose (including invert sugar expressed as sucrose)
Other
Containing less than 70|% by weight of sucrose (including invert sugar expressed as sucrose)
Containing|70|% or more by weight of sucrose (including invert sugar expressed as sucrose)
Other, in blocks, slabs or bars
Filled
Not filled
With added cereal, fruit or nuts
Other
Other
Chocolate and chocolate products
Chocolates (including pralines), whether or not filled
Containing alcohol
Other
Other
Filled
Not filled
Sugar confectionery and substitutes therefor made from sugar substitution products, containing cocoa
Spreads containing cocoa
In immediate packings of a net content not exceeding 1|kg
Other
Preparations containing cocoa for making beverages
In immediate packings of a net content not exceeding 1|kg
Other
Other
In immediate packings of a net content not exceeding 1|kg
Containing less than 70|% by weight of sucrose (including invert sugar expressed as sucrose)
Containing|70|% or more by weight of sucrose (including invert sugar expressed as sucrose)
Other
Containing less than 70|% by weight of sucrose (including invert sugar expressed as sucrose)
Containing|70|% or more by weight of sucrose (including invert sugar expressed as sucrose)
PREPARATIONS OF CEREALS, FLOUR, STARCH OR MILK; PASTRYCOOKS' PRODUCTS
Malt extract; food preparations of flour, groats, meal, starch or malt extract, not containing cocoa or containing less than 40|% by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of headings|0401|to 0404, not containing cocoa or containing less than 5|% by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included
Preparations for infant use, put up for retail sale
Mixes and doughs for the preparation of bakers' wares of heading|1905
Other
Malt extract
With a dry extract content of 90|% or more by weight
Other
Other
Containing no milkfats, sucrose, isoglucose, glucose or starch or containing less than 1,5|% milkfat, 5|% sucrose (including invert sugar) or isoglucose, 5|% glucose or starch, excluding food preparations in powder form of goods of headings|0401|to 0404
Other
Containing 60|% or more by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
Containing less than 70|% of sucrose (including invert sugar expessed as sucrose)
Other
Other
Preparation in powder form containing by weight: -|15|% or more but not more than 35|% of| wheat derived Maltodextrin, -|15|% or more but not more than 35|% of whey (milk serum), -|10|% or more but not more than 30|% of refined, bleached, deodorised and non-hydrogenated sunflower oil, -|10|% or more but not more than 30|% of blended, aged spray dried cheese, -|5|% or more but not more than 15|% of buttermilk and -|0,1|% or more but not more than 10|% of sodium caseinate, disodium phosphate, lactic acid
Other
Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared
Uncooked pasta, not stuffed or otherwise prepared
Containing eggs
Other
Containing no common wheat flour or meal
Other
Stuffed pasta, whether or not cooked or otherwise prepared
Containing more than 20|% by weight of fish, crustaceans, molluscs or other aquatic invertebrates
Containing more than 20|% by weight of sausages and the like, of meat and meat offal of any kind, including fats of any kind or origin
Other
Cooked
Other
Other pasta
Dried
Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale
Other
Other
Couscous
Unprepared
Other
Tapioca and substitutes therefor prepared from starch, in the form of flakes, grains, pearls, siftings or similar forms
Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale
Other
Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals (other than maize (corn)) in grain form or in the form of flakes or other worked grains (except flour, groats and meal), pre-cooked or otherwise prepared, not elsewhere specified or included
Prepared foods obtained by the swelling or roasting of cereals or cereal products
Obtained from maize
Obtained from rice
Other
Prepared foods obtained from unroasted cereal flakes or from mixtures of unroasted cereal flakes and roasted cereal flakes or swelled cereals
Preparation of the Müsli type based on unroasted cereal flakes
Other
Obtained from maize
Obtained from rice
Other
Bulgur wheat
Other
Obtained from rice
Other
Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products
Crispbread
Gingerbread and the like
Containing by weight less than 30|% of sucrose (including invert sugar expressed as sucrose)
Containing by weight 30|% or more but less than 50|% of sucrose (including invert sugar expessed as sucrose)
Containing by weight 50|% or more of sucrose (including invert sugar expressed as sucrose)
Sweet biscuits; waffles and wafers
Sweet biscuits
Completely or partially coated or covered with chocolate or other preparations containing cocoa
In immediate packings of a net content not exceeding 85|g
Other
Other
Containing 8|% or more by weight of milkfats
Other
Sandwich biscuits
Other
Waffles and wafers
With a water content exceeding 10|% by weight
Other
Completely or partially coated or covered with chocolate or other preparations containing cocoa
In immediate packings of a net content not exceeding 85|g
Other
Other
Salted, whether or not filled
Other
Rusks, toasted bread and similar toasted products
Rusks
Other
Other
Matzos
Communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products
Rice paper
Other
Other
Bread, not containing added honey, eggs, cheese or fruit, and containing by weight in the dry matter state not more than 5|% of sugars and not more than 5|% of fat
Biscuits
Extruded or expanded products, savoury or salted
Other
With added sweetening matter
Other
PREPARATIONS OF VEGETABLES, FRUIT, NUTS OR OTHER PARTS OF PLANTS
Vegetables, fruit, nuts and other edible parts of plants, prepared or preserved by vinegar or acetic acid
Cucumbers and gherkins
Cucumbers
Not containing added sugar
Other
Gherkins
Other
Mango chutney
Fruit of the genus Capsicum other than sweet peppers or pimentos
Sweetcorn (Zea mays var. saccharata)
In kernels, not frozen
Other
Yams, sweet potatoes and similar edible parts of plants containing 5|% or more by weight of starch
Mushrooms
Not containing added sugar
Other
Olives
Not containing added sugar
Other
Sweet peppers
Not containing added sugar
Other
Tropical fruit and tropical nuts; palm hearts
Palm hearts
Other
Not containing added sugar
Other
Other
Vine leaves
Not containing added sugar
Other
Hop shoots and similar edible parts of plants
Not containing added sugar
Other
Onions
Not containing added sugar
Other
Potatoes and products thereof
Not containing added sugar
Other
Other
Not containing added sugar
Other
Tomatoes prepared or preserved otherwise than by vinegar or acetic acid
Tomatoes, whole or in pieces
Peeled
Other
Other
With a dry matter content of less than 12|% by weight
In immediate packings of a net content exceeding 1|kg
In immediate packings of a net content not exceeding 1|kg
With a dry matter content of not less than 12|% but not more than 30|% by weight
In immediate packings of a net content exceeding 1|kg
In immediate packings of a net content not exceeding 1|kg
With a dry matter content of more than 30|% by weight
In immediate packings of a net content exceeding 1|kg
Powdered, whether or not containing added sugar, other sweetening matter or starch
Other
In immediate packings of a net content not exceeding 1|kg
Powdered, whether or not containing added sugar, other sweetening matter or starch
Other
Mushrooms and truffles, prepared or preserved otherwise than by vinegar or acetic acid
Mushrooms of the genus Agaricus
Provisionally preserved, completely cooked
Other
Other
Truffles
Other
Other vegetables prepared or preserved otherwise than by vinegar or acetic acid, frozen, other than products of heading|2006
Potatoes
Cooked, not otherwise prepared
Other
In the form of flour, meal or flakes
Other
Other vegetables and mixtures of vegetables
Sweetcorn (Zea mays var. saccharata)
Sauerkraut, capers and olives
Sauerkraut
Capers
Olives
Peas (Pisum sativum) and immature beans of the species Phaseolus spp., in pod
Other, including mixtures
Onions, cooked, not otherwise prepared
Other
Mixtures
Carrots
Asparagus
Products containing meat in a proportion of 3|% up to and including 20|% by weight
Globe artichokes
Other
Other vegetables prepared or preserved otherwise than by vinegar or acetic acid, not frozen, other than products of heading|2006
Homogenised vegetables
Mixtures
Carrots
Asparagus
Other
Potatoes
In the form of flour, meal or flakes
Other
Thin slices, fried or baked, whether or not salted or flavoured, in airtight packings, suitable for immediate consumption
Other
Peas (Pisum sativum)
Beans (Vigna spp., Phaseolus spp.)
Beans, shelled
Other
Asparagus
Olives
Sweetcorn (Zea mays var.saccharata)
In kernels, not frozen
Corn cobs (Zea Mays Saccharata) whether or not cut, with a diameter of 10 mm or more, but not more than 20 mm, for use in the manufacture of products of the food industry for treatment other than simple repacking
Other
Other vegetables and mixtures of vegetables
Bamboo shoots
Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5|kg
Other
Other
Fruit of the genus Capsicum, other than sweet peppers or pimentos
Powdered preparations, whether or not containing added sugar, other sweetening matter or starch
Other
Capers
Powdered preparations, whether or not containing added sugar, other sweetening matter or starch
Other
Globe artichokes
Powdered preparations, whether or not containing added sugar, other sweetening matter or starch
Other
Mixtures of vegetables
Powdered preparations, whether or not containing added sugar, other sweetening matter or starch
Other
Sauerkraut
Powdered preparations, whether or not containing added sugar, other sweetening matter or starch
Other
Other
Carrots
Powdered preparations, whether or not containing added sugar, other sweetening matter or starch
Other
Other
Powdered preparations, whether or not containing added sugar, other sweetening matter or starch
Products containing meat in a proportion of 3|% up to and including 20|% by weight
Other
Vegetables, fruit, nuts, fruit-peel and other parts of plants, preserved by sugar (drained, glacé or crystallised)
Ginger
Other
With a sugar content exceeding 13|% by weight
Cherries
Containing less than 70 % by weight of sugar
Other
Tropical fruit and tropical nuts
Other
Sweet corn (Zea mays var. saccharata)
Containing less than 70 % by weight of sugar
Other
Other
Containing less than 70 % by weight of sugar
Other
Other
Tropical fruit and tropical nuts
Other
Sweet corn (Zea mays var. saccharata)
Other
Jams, fruit jellies, marmalades, fruit or nut purée and fruit or nut pastes, obtained by cooking, whether or not containing added sugar or other sweetening matter
Homogenised preparations
With a sugar content exceeding 13|% by weight
Fig paste
Pistachio paste
Hazelnut paste
Other
Other
Of tropical fruit
Other
Fig paste
Pistachio paste
Hazelnut paste
Other
Other
Citrus fruit
With a sugar content exceeding 30|% by weight
Containing less than 70 % by weight of sugar
Other
With a sugar content exceeding 13|% but not exceeding 30|% by weight
Other
Other
With a sugar content exceeding 30|% by weight
Plum purée and paste and prune purée and paste, in immediate packings of a net content exceeding 100|kg, for industrial processing
Chestnut purée and paste
Containing less than 70 % by weight of sugar
Other
Other
Of cherries
Containing less than 70 % by weight of sugar
Fruit purées obtained by sieving then brought to the boil in a vacuum, the texture and chemical composition of which have not been changed by the heat treatment
Other
Other
Fruit purées obtained by sieving then brought to the boil in a vacuum, the texture and chemical composition of which have not been changed by the heat treatment
Other
Of strawberries
Containing less than 70 % by weight of sugar
Fruit purées obtained by sieving then brought to the boil in a vacuum, the texture and chemical composition of which have not been changed by the heat treatment
Other
Other
Fruit purées obtained by sieving then brought to the boil in a vacuum, the texture and chemical composition of which have not been changed by the heat treatment
Other
Of raspberries
Containing less than 70 % by weight of sugar
Fruit purées obtained by sieving then brought to the boil in a vacuum, the texture and chemical composition of which have not been changed by the heat treatment
Other
Other
Fruit purées obtained by sieving then brought to the boil in a vacuum, the texture and chemical composition of which have not been changed by the heat treatment
Other
Other
Fig paste
Containing less than 70 % by weight of sugar
Other
Pistachio paste
Containing less than 70 % by weight of sugar
Other
Hazelnut paste
Containing less than 70 % by weight of sugar
Other
Other
Fruit purées obtained by sieving then brought to the boil in a vacuum, the texture and chemical composition of which have not been changed by the heat treatment
Pears
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Containing less than 70 % by weight of sugar
Other
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
Containing less than 70 % by weight of sugar
Other
Apricots
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Containing less than 70 % by weight of sugar
Other
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
Containing less than 70 % by weight of sugar
Other
Peaches, including nectarines
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Containing less than 70 % by weight of sugar
Other
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
Containing less than 70 % by weight of sugar
Other
Mixtures
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Of tropical fruit (including mixtures containing 50|% or more by weight of tropical nuts and tropical fruit)
Containing less than 70 % by weight of sugar
Other
Other
Containing less than 70 % by weight of sugar
Other
Other
Mixtures of fruit in which no single fruit exceeds 50|% of the total weight of the fruits
Of tropical fruit (including mixtures containing 50|% or more by weight of tropical nuts and tropical fruit)
Containing less than 70 % by weight of sugar
Other
Other
Containing less than 70 % by weight of sugar
Other
Other
Of tropical fruit (including mixtures containing 50|% or more by weight of tropical nuts and tropical fruit)
Containing less than 70 % by weight of sugar
Other
Other
Containing less than 70 % by weight of sugar
Other
Other
Containing less than 70 % by weight of sugar
Other
Other
Containing less than 70 % by weight of sugar
Other
With a sugar content exceeding 13|% but not exceeding 30|% by weight
Chestnut purée and paste
Apple purée, including compotes
Fruit purées obtained by sieving then brought to the boil in a vacuum, the texture and chemical composition of which have not been changed by the heat treatment
Other
Fig paste
Pistachio paste
Hazelnut paste
Other
Fruit purées obtained by sieving then brought to the boil in a vacuum, the texture and chemical composition of which have not been changed by the heat treatment
Pears
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
With a sugar content exceeding 15|% by weight
Other
Apricots
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
With a sugar content exceeding 15|% by weight
Other
Peaches, including nectarines
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
With a sugar content exceeding 15|% by weight
Other
Mixtures
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Of tropical fruit (including mixtures containing 50|% or more by weight of tropical nuts and tropical fruit)
Other
Other
Mixtures of fruit in which no single fruit exceeds 50|% of the total weight of the fruits
Of tropical fruit (including mixtures containing 50|% or more by weight of tropical nuts and tropical fruit)
Other
Other
Of tropical fruit (including mixtures containing 50|% or more by weight of tropical nuts and tropical fruit)
Other
Other
Acerola puree concentrate, obtained by cooking: -|of the Genus Malpighia spp., -|with a sugar content by weight of more than 13|%|but not more than|30|% for use in the manufacture of products of food and drink industry
Acidified banana puree concentrate, obtained by cooking: -|of the Genus Musa cavendish, -|with a sugar content by weight of more than 13|%|but not more than|30|% for use in the manufacture of products of food and drink industry
Mango puree concentrate, obtained by cooking: -|of the Genus|Mangifera spp., -|with a sugar content by weight of not more than 30|% for use in the manufacture of products of food and drink industry
Papaya puree concentrate, obtained by cooking: -|of the Genus|Carica spp., -|with a sugar content by weight of more than 13|%|but not more than|30|% for use in the manufacture of products of food and drink industry
Guava puree concentrate, obtained by cooking: -|of the Genus|Psidium spp., -|with a sugar content by weight of more than 13|%|but not more than|30|% for use in the manufacture of products of food and drink industry
Other
Other
Acerola puree concentrate, obtained by cooking: -|of the Genus Malpighia spp., -|with a sugar content by weight of more than 13|%|but not more than|30|% for use in the manufacture of products of food and drink industry
Acidified banana puree concentrate, obtained by cooking: -|of the Genus Musa cavendish, -|with a sugar content by weight of more than 13|%|but not more than|30|% for use in the manufacture of products of food and drink industry
Mango puree concentrate, obtained by cooking: -|of the Genus|Mangifera spp., -|with a sugar content by weight of not more than 30|% for use in the manufacture of products of food and drink industry
Papaya puree concentrate, obtained by cooking: -|of the Genus|Carica spp., -|with a sugar content by weight of more than 13|%|but not more than|30|% for use in the manufacture of products of food and drink industry
Guava puree concentrate, obtained by cooking: -|of the Genus|Psidium spp., -|with a sugar content by weight of more than 13|%|but not more than|30|% for use in the manufacture of products of food and drink industry
Other
Other
Of tropical fruit and tropical nuts
Mango puree concentrate, obtained by cooking: -|of the Genus|Mangifera spp., -|with a sugar content by weight of not more than 30|% for use in the manufacture of products of food and drink industry
Other
Other
Apple purée, including compotes
Fig paste
Pistachio paste
Hazelnut paste
Peach or pear and mixtures thereof, in jelly of these fruits
Other
fruit purées obtained by sieving then brought to the boil in a vacuum, the texture and chemical composition of which have not been changed by the heat treatment
Pears
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
Not containing added sugar
Apricots
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
Not containing added sugar, in immediate packings of a net content
Of 5|kg or more
Of less than 5|kg
Of 4,5|kg or more
Of less than 4,5|kg
Peaches, including nectarines
Containing added sugar
Not containing added sugar, in immediate packings of a net content
Of 5|kg or more
Of less than 5|kg
Of 4,5|kg or more
Of less than 4,5|kg
Mixtures
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Of tropical fruit (including mixtures containing 50|% or more by weight of tropical nuts and tropical fruit)
Other
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
Of tropical fruit (including mixtures containing 50|% or more by weight of tropical nuts and tropical fruit)
Other
Not containing added sugar, in immediate packings of a net content
Of less than 4,5|kg
Of tropical fruit (including mixtures containing 50|% or more by weight of tropical nuts and tropical fruit)
Other
Other
Other
Other
Fruit, nuts and other edible parts of plants, otherwise prepared or preserved, whether or not containing added sugar or other sweetening matter or spirit, not elsewhere specified or included
Nuts, groundnuts and other seeds, whether or not mixed together
Groundnuts
Peanut butter
Other, in immediate packings of a net content
Exceeding 1|kg
Roasted
Other
Not exceeding 1|kg
Roasted
Other
Other, including mixtures
In immediate packings of a net content exceeding 1|kg
Tropical nuts; mixtures containing by weight 50|% or more of tropical nuts
Containing hazelnuts
Other
Other
Roasted almonds and pistachios
Pistachios
Other
Other
Hazelnuts
Other
In immediate packings of a net content not exceeding 1|kg
Tropical nuts; mixtures containing by weight 50|% or more of tropical nuts
Containing hazelnuts
Other
Other
Roasted nuts
Almonds and pistachios
Pistachios
Other
Other
Hazelnuts
Other
Other
Hazelnuts
Other
Pineapples
Containing added spirit
In immediate packings of a net content exceeding 1|kg
With a sugar content exceeding 17|% by weight
Other
In immediate packings of a net content not exceeding 1|kg
With a sugar content exceeding 19|% by weight
Other
Not containing added spirit
Containing added sugar, in immediate packings of a net content exceeding 1|kg
With a sugar content exceeding 17|% by weight
Other
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
With a sugar content exceeding 19|% by weight
Other
Not containing added sugar
Citrus fruit
Containing added spirit
With a sugar content exceeding 9|% by weight
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
Other
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
Not containing added spirit
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Grapefruit segments, including pomelos
Mandarins (including tangerines and satsumas); clementines, wilkings and other similar citrus hybrids
Comminuted
Flaked or powdered, whether or not containing starch
Other
Other
Grapefruit, including pomelo
Flaked or powdered, whether or not containing starch
Other
Comminuted oranges and lemons
Other oranges
Flaked or powdered, whether or not containing starch
Other
Other
Flaked or powdered, whether or not containing starch
Other
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
Grapefruit segments, including pomelos
Mandarins (including tangerines and satsumas); clementines, wilkings and other similar citrus hybrids
Comminuted
Flaked or powdered, whether or not containing starch
Other
Other
Grapefruit, including pomelo
Flaked or powdered, whether or not containing starch
Other
Comminuted oranges and lemons
Other
Flaked or powdered, whether or not containing starch
Other
Not containing added sugar
Grapefruit, including pomelo
Segments
Pulp
In immediate packings of a net content of 4,5|kg or more
Other
Comminuted
Flaked or powdered, whether or not containing starch
Other
Other
Mandarins (including tangerines and satsumas); clementines, wilkings and other similar citrus hybrids
Pulp
In immediate packings of a net content of 4,5|kg or more
Other
Flaked or powdered, whether or not containing starch
Comminuted
Other
Other
Pulp
In immediate packings of a net content of 4,5|kg or more
Other
Flaked or powdered, whether or not containing starch
Comminuted
Other
Pears
Containing added spirit
In immediate packings of a net content exceeding 1|kg
With a sugar content exceeding 13|% by weight
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
Other
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
In immediate packings of a net content not exceeding 1|kg
With a sugar content exceeding 15|% by weight
Other
Not containing added spirit
Containing added sugar, in immediate packings of a net content exceeding 1|kg
With a sugar content exceeding 13|% by weight
Flaked or powdered, whether or not containing starch
Other
Other
Flaked or powdered, whether or not containing starch
Other
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
With a sugar content exceeding 15|% by weight
Flaked or powdered, whether or not containing starch
Other
Other
Flaked or powdered, whether or not containing starch
Other
Not containing added sugar
Flaked or powdered, whether or not containing starch
Other
Apricots
Containing added spirit
In immediate packings of a net content exceeding 1|kg
With a sugar content exceeding 13|% by weight
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
Other
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
In immediate packings of a net content not exceeding 1|kg
With a sugar content exceeding 15|% by weight
Other
Not containing added spirit
Containing added sugar, in immediate packings of a net content exceeding 1|kg
With a sugar content exceeding 13|% by weight
Flaked or powdered, whether or not containing starch
Other
Other
Flaked or powdered, whether or not containing starch
Other
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
With a sugar content exceeding 15|% by weight
Flaked or powdered, whether or not containing starch
Other
Other
Flaked or powdered, whether or not containing starch
Other
Not containing added sugar, in immediate packings of a net content
Of 5|kg or more
Apricot halves
Apricot pulp
Flaked or powdered, whether or not containing starch
Other
Of less than 5|kg
Of 4,5|kg or more
Apricot halves
Apricot pulp
Flaked or powdered, whether or not containing starch
Other
Of less than 4,5|kg
Apricot halves
Flaked or powdered, whether or not containing starch
Other
Cherries
Containing added spirit
With a sugar content exceeding 9|% by weight
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
Other
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
Sweet cherries containing added spirit, with a sugar content of not more than 9|% by weight, of a diameter of not more than 19,9|mm, with stones, for use in chocolate products
Other
Not containing added spirit
Containing added sugar, in immediate packings of a net content
Exceeding 1|kg
Sour cherries (Prunus cerasus)
Other
Not exceeding 1|kg
Not containing added sugar, in immediate packings of a net content
Of 4,5|kg or more
Of less than 4,5|kg
Peaches, including nectarines
Containing added spirit
In immediate packings of a net content exceeding 1|kg
With a sugar content exceeding 13|% by weight
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
Other
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
In immediate packings of a net content not exceeding 1|kg
With a sugar content exceeding 15|% by weight
Other
Not containing added spirit
Containing added sugar, in immediate packings of a net content exceeding 1|kg
With a sugar content exceeding 13|% by weight
Peaches, flaked or powdered, whether or not containing starch
Other
Other
Peaches, flaked or powdered, whether or not containing starch
Other
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
With a sugar content exceeding 15|% by weight
In slices, deep fried
Peaches, flaked or powdered, whether or not containing starch
Other
Other
Peaches, flaked or powdered, whether or not containing starch
Other
Not containing added sugar, in immediate packings of a net content
Of 5|kg or more
Peach halves (including nectarines)
Peaches, flaked or powdered, whether or not containing starch
Other
Of less than 5|kg
Of 4,5|kg or more
Peach halves (including nectarines)
Peaches, flaked or powdered, whether or not containing starch
Other
Peaches
Other
Of less than 4,5|kg
Peach halves (including nectarines)
Peaches, flaked or powdered, whether or not containing starch
Other
Peaches
Other
Strawberries
Containing added spirit
With a sugar content exceeding 9|% by weight
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
Other
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
Not containing added spirit
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Flaked or powdered, whether or not containing starch
Other
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
Flaked or powdered, whether or not containing starch
Other
Not containing added sugar
Flaked or powdered, whether or not containing starch
Other
Other, including mixtures other than those of subheading|2008|19
Palm hearts
Cranberries (Vaccinium macrocarpon, Vaccinium oxycoccos, Vaccinium vitis-idaea)
Containing added spirit
With a sugar content exceeding 9|% by weight
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
Other
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
Not containing added spirit
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Flaked or powdered, whether or not containing starch
Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries
Other
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
Flaked or powdered, whether or not containing starch
Other
Not containing added sugar
Flaked or powdered, whether or not containing starch
Other
Mixtures
Of tropical nuts and tropical fruit, containing by weight 50|% or more of tropical nuts
In immediate packings of a net content exceeding 1|kg
In immediate packings of a net content not exceeding 1|kg
Other
Containing added spirit
With a sugar content exceeding 9|% by weight
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Of tropical fruit (including mixtures containing by weight 50|% or more of tropical nuts and tropical fruit)
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Of tropical fruit (including mixtures containing by weight 50|% or more of tropical nuts and tropical fruit)
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Of tropical fruit (including mixtures containing by weight 50|% or more of tropical nuts and tropical fruit)
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Of tropical fruit (including mixtures containing by weight 50|% or more of tropical nuts and tropical fruit)
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Containing figs
Containing hazelnuts
Containing pistachios
Other
Not containing added spirit
Containing added sugar
In immediate packings of a net content exceeding 1|kg
Of tropical fruit (including mixtures containing by weight 50|% or more of tropical nuts and tropical fruit)
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Mixtures of fruit in which no single fruit exceeds 50|% of the total weight of the fruit
Of tropical fruit (including mixtures containing by weight 50|% or more of tropical nuts and tropical fruit)
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Of tropical fruit (including mixtures containing by weight 50|% or more of tropical nuts and tropical fruit)
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Containing figs
Containing hazelnuts
Containing pistachios
Other
Not containing added sugar, in immediate packings of a net content
Of 5|kg or more
Of tropical fruit (including mixtures containing by weight 50|% or more of tropical nuts and tropical fruit)
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Containing figs
Containing hazelnuts
Containing pistachios
Other
Of 4,5|kg or more but less than 5|kg
Of tropical fruit (including mixtures containing by weight 50|% or more of tropical nuts and tropical fruit)
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Containing figs
Containing hazelnuts
Containing pistachios
Other
Of less than 4,5|kg
Of tropical fruit (including mixtures containing by weight 50|% or more of tropical nuts and tropical fruit)
Containing figs
Containing hazelnuts
Containing pistachios
Other
Other
Containing figs
Containing hazelnuts
Containing pistachios
Mixtures, presented in their juice, containing at least two of the following fruit: peach or pear or pineapple
Other
Other
Containing added spirit
Ginger
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Other
Grapes
With a sugar content exceeding 13|% by weight
Other
Other
With a sugar content exceeding 9|% by weight
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Tropical fruit
Other
Figs
Other
Other
Tropical fruit
Other
Figs
Other
Other
Of an actual alcoholic strength by mass not exceeding 11,85|%|mas
Tropical fruit
Other
Figs
Other
Other
Tropical fruit
Other
Figs
Other
Not containing added spirit
Containing added sugar, in immediate packings of a net content exceeding 1|kg
Ginger
Grapes
Flaked or powdered, whether or not containing starch
Other
Plums and prunes
Flaked or powdered, whether or not containing starch
Other
Tropical fruit
Passion fruit, guavas and tamarinds
Flaked or powdered, whether or not containing starch
Other
Mangoes, mangosteens, papaws (papayas), cashew apples, lychees, jackfruit, sapodillo plums, carambola and pitahaya
Flaked or powdered, whether or not containing starch
Other
Mango puree: •not from concentrate, •of the genus Mangifera, •of a Brix value of 14 or more, but not more than 20 used in the manufacture of products of drink industry
Other
Other
Flaked or powdered, whether or not containing starch
Seedless boysenberry puree not containing added spirit, whether or not containing added sugar
Figs
Blanched vine leaves of the genus Karakishmish, in brine, containing by weight: -|more than 6|% of salt concentration, -|0,1|% or more but not more than 1,4|% of acidity expressed as citric acid monohydrate and -|whether or not but not more than 2|000|mg/kg of sodium benzoate according CODEX STAN 192-1995 for use in the manufacture of stuffed vine leaves with rice
Other
Containing added sugar, in immediate packings of a net content not exceeding 1|kg
Ginger
Tropical fruit
Flaked or powdered, whether or not containing starch
Other
Other
Flaked or powdered, whether or not containing starch
Figs
Other
Not containing added sugar
Plums and prunes, in immediate packings of a net content
Of 5|kg or more
Flaked or powdered, whether or not containing starch
Other
Of less than 5|kg
Flaked or powdered, whether or not containing starch
Other
Maize (corn), other than sweetcorn (Zea mays var. saccharata)
Yams, sweet potatoes and similar edible parts of plants, containing 5|% or more by weight of starch
Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking
Other
Other
Vine leaves
Blanched vine leaves of the genus Karakishmish, in brine, containing by weight: -|more than 6|% of salt concentration, -|0,1|% or more but not more than 1,4|% of acidity expressed as citric acid monohydrate and -|whether or not but not more than 2|000|mg/kg of sodium benzoate according CODEX STAN 192-1995 for use in the manufacture of stuffed vine leaves with rice
Other
Hop shoots and similar edible parts of plants
Flaked or powdered, whether or not containing starch
Seedless boysenberry puree not containing added spirit, whether or not containing added sugar
Watermelon (egusi, Citrullus spp.) seeds and derived products
Figs
Mint (fresh or chilled)
Basil (holy, sweet) (fresh or chilled)
Curry leaves (Bergera koenigii, Syn.: Murraya koenigii) (frozen)
Other
Fruit juices (including grape must) and vegetable juices, unfermented and not containing added spirit, whether or not containing added sugar or other sweetening matter
Orange juice
Frozen
Of a Brix value exceeding 67
Of a value not exceeding €|30|per 100|kg net weight
In containers of two litres or less
With an added sugar content not exceeding 30|% by weight
Other
Other
With an added sugar content not exceeding 30|% by weight
Other
Other
In containers of two litres or less
Other
Of a Brix value not exceeding 67
Of a value not exceeding €|30|per 100|kg net weight and with an added sugar content exceeding 30|% by weight
In containers of two litres or less
Other
Other
Having a degree of concentration of up to 50!o! Brix, in containers of two litres or less, excluding blood orange juice
with a degree of concentration higher than 20!o! brix
Other
Other
In containers of two litres or less
with a degree of concentration higher than 20!o! brix
Other
Other
with a degree of concentration higher than 20!o! brix
Other
Not frozen, of a Brix value not exceeding 20
In containers of two litres or less
Other
Other
Of a Brix value exceeding 67
Of a value not exceeding €|30|per 100|kg net weight
In containers of two litres or less
powdered
With an added sugar content not exceeding 30|% by weight
Other
Other
With an added sugar content not exceeding 30|% by weight
Other
Other
powdered
With an added sugar content not exceeding 30|% by weight
Other
Other
With an added sugar content not exceeding 30|% by weight
Other
Other
In containers of two litres or less
powdered
Other
Other
powdered
Other
Of a Brix value exceeding 20|but not exceeding 67
Of a value not exceeding €|30|per 100|kg net weight and with an added sugar content exceeding 30|% by weight
In containers of two litres or less
powdered
Other
Other
powdered
Other
Other
In containers of two litres or less
powdered
Other
Other
powdered
Other
Grapefruit (including pomelo) juice
Of a Brix value not exceeding 20
powdered
Other
Other
Of a Brix value exceeding 67
Of a value not exceeding €|30|per 100|kg net weight
powdered
With an added sugar content not exceeding 30|% by weight
Other
Other
With an added sugar content not exceeding 30|% by weight
Other
Other
powdered
Other
Of a Brix value exceeding 20|but not exceeding 67
Of a value not exceeding €|30|per 100|kg net weight and with an added sugar content exceeding 30|% by weight
powdered
Other
Other
powdered
Other
Juice of any other single citrus fruit
Of a Brix value not exceeding 20
Of a value exceeding €|30|per 100|kg net weight
Containing added sugar
Lemon juice
powdered
Other
Other
powdered
Other
Not containing added sugar
Lemon juice
powdered
Other
Other
powdered
Other
Of a value not exceeding €|30|per 100|kg net weight
Lemon juice
Containing added sugar
powdered
Other
Not containing added sugar
powdered
Other
Other citrus fruit juices
Containing added sugar
powdered
Other
Not containing added sugar
powdered
Other
Other
Of a Brix value exceeding 67
Of a value not exceeding €|30|per 100|kg net weight
powdered
With an added sugar content not exceeding 30|% by weight
Other
Other
With an added sugar content not exceeding 30|% by weight
Other
Other
powdered
Other
Of a Brix value exceeding 20|but not exceeding 67
Of a value exceeding €|30|per 100|kg net weight
Containing added sugar
Lemon juice
powdered
Other
Other
powdered
Other
Not containing added sugar
Lemon juice
powdered
Other
Other
powdered
Other
Of a value not exceeding €|30|per 100|kg net weight
Lemon juice
With an added sugar content exceeding 30|% by weight
powdered
Other
With an added sugar content not exceeding 30|% by weight
powdered
Other
Not containing added sugar
powdered
Other
Other citrus fruit juices
With an added sugar content exceeding 30|% by weight
powdered
Other
With an added sugar content not exceeding 30|% by weight
powdered
Other
Not containing added sugar
powdered
Other
Pineapple juice
Of a Brix value not exceeding 20
Containing added sugar
Of a value exceeding €|30|per 100|kg net weight
powdered
Other
Pineapple juice: — not from concentrate, — of the genus Ananas, — of a Brix value of 11 or more but not more than 16, used in the manufacture of products of drink industry
Other
Other
powdered
Other
Not containing added sugar
powdered
Other
Pineapple juice: •not from concentrate, •of the genus Ananas, •of a Brix value of 11 or more but not more than 16, used in the manufacture of products of drink industry
Other
Other
Of a Brix value exceeding 67
Of a value not exceeding €|30|per 100|kg net weight
powdered
With an added sugar content not exceeding 30|% by weight
Other
Other
With an added sugar content not exceeding 30|% by weight
Other
Other
powdered
Other
Of a Brix value exceeding 20|but not exceeding 67
Of a value exceeding €|30|per 100|kg net weight, containing added sugar
powdered
Other
Pineapple juice, other than in powder form: -|with a Brix value of more than 20|but not more than 67, -|a value of more than|€|30|per 100|kg net weight, -|containing added sugar used in the manufacture of products of food or drink industry
Other
Other
With an added sugar content exceeding 30|% by weight
powdered
Other
With an added sugar content not exceeding 30|% by weight
powdered
Other
Not containing added sugar
powdered
Other
Tomato juice
Containing added sugar
Other
Grape juice (including grape must)
Of a Brix value not exceeding 30
Of a value exceeding €|18|per 100|kg net weight
Of a value not exceeding €|18|per 100|kg net weight
for the production of grape juice and/or non-wine sector products such as non-alcoholic drinks, jams and sauces
Other
Other
Of a Brix value exceeding 67
Of a value not exceeding €|22|per 100|kg net weight
for the production of grape juice and/or non-wine sector products such as non-alcoholic drinks, jams and sauces
With an added sugar content not exceeding 30|% by weight
Other
Other
With an added sugar content not exceeding 30|% by weight
Other
Other
for the production of grape juice and/or non-wine sector products such as non-alcoholic drinks, jams and sauces
Other
Of a Brix value exceeding 30|but not exceeding 67
Of a value exceeding €|18|per 100|kg net weight
Concentrated
for the production of grape juice and/or non-wine sector products such as non-alcoholic drinks, jams and sauces
Other
Other
Of a value not exceeding €|18|per 100|kg net weight
With an added sugar content exceeding 30|% by weight
Concentrated
Other
Other
for the production of grape juice and/or non-wine sector products such as non-alcoholic drinks, jams and sauces
Other
Apple juice
Of a Brix value not exceeding 20
Containing added sugar
powdered
Other
Not containing added sugar
powdered
Other
Other
Of a Brix value exceeding 67
Of a value not exceeding €|22|per 100|kg net weight
powdered
With an added sugar content not exceeding 30|% by weight
Other
Other
With an added sugar content not exceeding 30|% by weight
Other
Other
powdered
Other
Of a Brix value exceeding 20|but not exceeding 67
Of a value exceeding €|18|per 100|kg net weight, containing added sugar
powdered
Other
Other
With an added sugar content exceeding 30|% by weight
powdered
Other
Other
Not containing added sugar
powdered
Other
Other
powdered
Other
Juice of any other single fruit or vegetable
Cranberry (Vaccinium macrocarpon, Vaccinium oxycoccos, Vaccinium vitis-idaea) juice
Of a Brix value exceeding 67
Of a value not exceeding €|30|per 100|kg net weight
With an added sugar content not exceeding 30|% by weight
Other
Other
Of a Brix value not exceeding 67
Of a value exceeding €|30|per 100|kg net weight, containing added sugar
Cranberry juice concentrate: -|of a Brix value of 40|or more but not more than 66, -|in immediate packings of a content of 50|litres or more
Other
powdered
Other
Other
With an added sugar content exceeding 30|% by weight
With an added sugar content not exceeding 30|% by weight
Not containing added sugar
Juice of fruit of the species Vaccinium macrocarpon
powdered
Other
Other
powdered
Other
Other
Of a Brix value exceeding 67
Pear juice
Of a value not exceeding €|22|per 100|kg net weight
powdered
With an added sugar content not exceeding 30|% by weight
Other
Other
With an added sugar content not exceeding 30|% by weight
Other
Other
powdered
Other
Other
Of a value not exceeding €|30|per 100|kg net weight
Juices of tropical fruit
powdered
Other
Other
Apricot juice
powdered
With an added sugar content not exceeding 30|% by weight
Other
Other
With an added sugar content not exceeding 30|% by weight
Other
Other
powdered
With an added sugar content not exceeding 30|% by weight
Other
Other
With an added sugar content not exceeding 30|% by weight
Other
Other
Juices of tropical fruit
powdered
Other
Other
Apricot juice
powdered
Other
Other
powdered
Other
Of a Brix value not exceeding 67
Pear juice
Of a value exceeding €|18|per 100|kg net weight, containing added sugar
powdered
Other
Other
With an added sugar content exceeding 30|% by weight
powdered
Other
With an added sugar content not exceeding 30|% by weight
powdered
Other
Not containing added sugar
powdered
Other
Other
Of a value exceeding €|30|per 100|kg net weight, containing added sugar
Cherry juice
powdered
Other
Juices of tropical fruit
Passion fruit juice and passion fruit juice concentrate, whether or not frozen: -|with a Brix value of 13,7|or more but not more than 55, -|of a value of more than|€ 30|per 100|kg net weight, -|in immediate packings of a content of 50|liters or more, and -|with added sugar for the use in the manufacture of products of food or drink industry
powdered
Other
Other
powdered
Other
Other
Apricot juice
powdered
Other
Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packing of a content of 50 litres or more
Frozen acerola juice concentrate : -|with a Brix value of more than 48|but not more than 67, -|in immediate packings of a content of 50|litres or more
Acai berry juice concentrate: •of the species Euterpe oleracea, •frozen, •not sweetened, •not in powder form, •of a Brix value of 23 or more but not more than 32, in immediate packings of a content of 10kg or more
Other
powdered
Other
Other
With an added sugar content exceeding 30|% by weight
Juices of tropical fruit
powdered
Other
Other
Apricot juice
powdered
Other
Other
powdered
Other
With an added sugar content not exceeding 30|% by weight
Juices of tropical fruit
powdered
Other
Other
Apricot juice
powdered
Other
Other
powdered
Other
Not containing added sugar
Cherry juice
powdered
Other
Juices of tropical fruit
Passion fruit juice and passion fruit juice concentrate, whether or not frozen: -|with a Brix value of 10|or more but not more than 13,7, -|of a value of more than|€ 30|per 100|kg net weight, -|in immediate packings of a content of 50|liters or more, and| -|without added sugar for the use in the manufacture of products of food or drink industry
Powdered
Other
Other
Powdered
Other
Other
powdered
Apricot juice
Other
Other
Apricot juice
Coconut water -|unfermented, -|not containing added spirit or sugar, and -|in|immediate packing of a content of 50|litres or more
Other
Mixtures of juices
Of a Brix value exceeding 67
Mixtures of apple and pear juice
Of a value not exceeding €|22|per 100|kg net weight
With an added sugar content not exceeding 30|% by weight
Other
Other
Other
Of a value not exceeding €|30|per 100|kg net weight
Mixtures of citrus juices
With an added sugar content not exceeding 30|% by weight
Other
Other
With an added sugar content not exceeding 30|% by weight
Other
Other
Mixtures of citrus juices
Other
Of a Brix value not exceeding 67
Mixtures of apple and pear juice
Of a value not exceeding €|18|per 100|kg net weight and with an added sugar content exceeding 30|% by weight
Other
Other
Of a value exceeding €|30|per 100|kg net weight
Mixtures of citrus fruit juices and pineapple juice
Containing added sugar
Other
Other
Containing added sugar
Mixtures of citrus juices
Other
Other
Mixtures of citrus juices
Other
Of a value not exceeding €|30|per 100|kg net weight
Mixtures of citrus fruit juices and pineapple juice
With an added sugar content exceeding 30|% by weight
With an added sugar content not exceeding 30|% by weight
Not containing added sugar
Other
With an added sugar content exceeding 30|% by weight
Mixtures of juices of tropical fruit
Other
Mixtures of citrus juices
Other
With an added sugar content not exceeding 30|% by weight
Mixtures of juices of tropical fruit
Other
Mixtures of citrus juices
Other
Not containing added sugar
Mixtures of juices of tropical fruit
Other
Mixtures of citrus juices
Other
MISCELLANEOUS EDIBLE PREPARATIONS
Extracts, essences and concentrates, of coffee, tea or maté and preparations with a basis of these products or with a basis of coffee, tea or maté; roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereof
Extracts, essences and concentrates, of coffee, and preparations with a basis of these extracts, essences or concentrates or with a basis of coffee
Extracts, essences and concentrates
Preparations with a basis of these extracts, essences or concentrates or with a basis of coffee
Preparations with a basis of these extracts, essences or concentrates of coffee
Containing no milkfats, milk proteins, sucrose, isoglucose, glucose or starch or containing less than 1,5|% milkfat, 2,5|% milk proteins, 5|% sucrose or isoglucose, 5|% glucose or starch
Other
Other
Containing no milkfats, milk proteins, sucrose, isoglucose, glucose or starch or containing less than 1,5|% milkfat, 2,5|% milk proteins, 5|% sucrose or isoglucose, 5|% glucose or starch
Other
Containing 70|% or more by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
Other
Extracts, essences and concentrates, of tea or maté, and preparations with a basis of these extracts, essences or concentrates, or with a basis of tea or maté
Extracts, essences or concentrates
Preparations
With a basis of extracts, essences or concentrates of tea or maté
Containing no milkfats, milk proteins, sucrose, isoglucose, glucose or starch or containing less than 1,5|% milkfat, 2,5|% milk proteins, 5|% sucrose or isoglucose, 5|% glucose or starch
Other
Other
Containing no milkfats, milk proteins, sucrose, isoglucose, glucose or starch or containing less than 1,5|% milkfat, 2,5|% milk proteins, 5|% sucrose or isoglucose, 5|% glucose or starch
Other
Containing 70|% or more by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
Other
Roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereof
Roasted chicory and other roasted coffee substitutes
Roasted chicory
Other
Extracts, essences and concentrates of roasted chicory and other roasted coffee substitutes
Of roasted chicory
Other
Yeasts (active or inactive); other single-cell micro-organisms, dead (but not including vaccines of heading|3002); prepared baking powders
Active yeasts
Culture yeast
for feeding purpose
Other
Bakers' yeast
Dried
Other
Other
For feeding purpose
Other
Inactive yeasts; other single-cell micro-organisms, dead
Inactive yeasts
In tablet, cube or similar form, or in immediate packings of a net content not exceeding 1|kg
for feeding purpose
Other
Other
for feeding purpose
Other
Other
Prepared baking powders
Sauces and preparations therefor; mixed condiments and mixed seasonings; mustard flour and meal and prepared mustard
Soya sauce
Tomato ketchup and other tomato sauces
Mustard flour and meal and prepared mustard
Mustard flour and meal
Prepared mustard
Containing no added sugar or containing less than 5% by weight of added sugar
Containing 5% or more by weight of added sugar
Other
Mango chutney, liquid
Aromatic bitters of an alcoholic strength by volume of 44,2|to 49,2|% vol containing from 1,5|to 6|% by weight of gentian, spices and various ingredients and from 4|to 10|% of sugar, in containers holding 0,5|litre or less
Other
Containing tomato
Other
Soups and broths and preparations therefor; homogenised composite food preparations
Soups and broths and preparations therefor
Containing tomato
Other
Homogenised composite food preparations
Ice cream and other edible ice, whether or not containing cocoa
Containing no milkfats or containing less than 3|% by weight of such fats
Containing by weight of milkfats
3|% or more but less than 7|%
7|% or more
Food preparations not elsewhere specified or included
Protein concentrates and textured protein substances
Containing no milkfats, sucrose, isoglucose, glucose or starch or containing, by weight, less than 1,5|% milkfat, 5|% sucrose or isoglucose, 5|% glucose or starch
Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65|% or more but not more than 90|% in powder or textured form
Preparation on the base of soya protein isolate, containing by weight 6,6|% or more but not more than 8,6|% of calcium phosphate
Other
Other
Containing more than 1% milk fats, 1% other fats or more than 5% sugars
Other
Other
Compound alcoholic preparations, other than those based on odoriferous substances, of a kind used for the manufacture of beverages
Flavoured or coloured sugar syrups
Isoglucose syrups
Other
Lactose syrup
Glucose syrup and maltodextrine syrup
Other
Containing 70|% or more by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
Other
Other
Containing no milkfats, sucrose, isoglucose, glucose or starch or containing, by weight, less than 1,5|% milkfat, 5|% sucrose or isoglucose, 5|% glucose or starch
Hydrolysates of proteins and autolysates of yeast
Preparation containing by weight: -|more than 30|% but not more than 35|% licorice extract, -|more than 65|% but not more than 70|% tricaprylin, standardized by weight to 3|% or more but not more than 4|% glabridin
Other
Other
Containing|26|% or more by weight of milkfat
In immediate packings of a net capacity of 1|kg or less
Of a kind used in drink industries containing 70% or more by weight of sucrose/isosucrose
Other
Containing less than 70 % by weight of sugar
Other
Other
Of a kind used in drink industries containing 70% or more by weight of sucrose/isosucrose
Other
Containing less than 70 % by weight of sugar
Other
Other
Containing less than 70|% by weight of sucrose (including invert sugar expressed as sucrose)
Containing 60|% or more by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
Other
Preparation in powder form containing by weight: -|15|% or more but not more than 35|% of| wheat derived Maltodextrin, -|15|% or more but not more than 35|% of whey (milk serum), -|10|% or more but not more than 30|% of refined, bleached, deodorised and non-hydrogenated sunflower oil, -|10|% or more but not more than 30|% of blended, aged spray dried cheese, -|5|% or more but not more than 15|% of buttermilk and -|0,1|% or more but not more than 10|% of sodium caseinate, disodium phosphate, lactic acid
Other
Other
Of a kind used in drink industries
Other
BEVERAGES, SPIRITS AND VINEGAR
Waters, including natural or artificial mineral waters and aerated waters, not containing added sugar or other sweetening matter nor flavoured; ice and snow
Mineral waters and aerated waters
Natural mineral waters
Not carbonated
Other
Other
Other
Waters, including mineral waters and aerated waters, containing added sugar or other sweetening matter or flavoured, and other non-alcoholic beverages, not including fruit or vegetable juices of heading|2009
Waters, including mineral waters and aerated waters, containing added sugar or other sweetening matter or flavoured
Other
Not containing products of headings|0401|to 0404|or fat obtained from products of headings|0401|to 0404
Soya-based beverages with a protein content of 2,8|% or more by weight
Containing sugar (sucrose or invert sugar)
Fruit juice or vegetable juice diluted with water or aerated
Other
Other
Fruit juice or vegetable juice diluted with water or aerated
Other
Soya-based beverages with a protein content of less than 2,8|% by weight; beverages based on nuts of Chapter 8, cereals of Chapter 10|or seeds of Chapter 12
Containing sugar (sucrose or invert sugar)
Fruit juice or vegetable juice diluted with water or aerated
Other
Other
Fruit juice or vegetable juice diluted with water or aerated
Other
Other
Containing sugar (sucrose or invert sugar)
Fruit juice or vegetable juice diluted with water or aerated
Other
Other
Fruit juice or vegetable juice diluted with water or aerated
Other
Other, containing by weight of fat obtained from the products of headings|0401|to 0404
Less than 0,2|%
Fruit juice or vegetable juice diluted with water or aerated
Other
0,2|% or more but less than 2|%
Fruit juice or vegetable juice diluted with water or aerated
Other
2|% or more
Fruit juice or vegetable juice diluted with water or aerated
Other
Beer made from malt
In containers holding 10|litres or less
In bottles
Other
In containers holding more than 10|litres
Wine of fresh grapes, including fortified wines; grape must other than that of heading|2009
Sparkling wine
With a protected designation of origin (PDO)
Champagne
Asti spumante
Other
With a protected geographical indication (PGI)
Other varietal wines
Other
Other wine; grape must with fermentation prevented or arrested by the addition of alcohol
In containers holding 2|litres or less
Wine, other than that referred to in subheading|2204|10, in bottles with 'mushroom' stoppers held in place by ties or fastenings; wine, otherwise put up, with an excess pressure due to carbon dioxide in solution of not less than 1|bar but less than 3|bar, measured at a temperature of 20|°C
With a protected designation of origin (PDO)
With a protected geographical indication (PGI)
Other varietal wines
Other
Other
Produced in the European Union
Of an actual alcoholic strength by volume not exceeding 15|%|vol
Wine with a protected designation of origin (PDO)
White
Alsace
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Bordeaux
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Bourgogne (Burgundy)
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Val de Loire (Loire Valley)
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Mosel
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Pfalz
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Rheinhessen
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Tokaj
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Lazio (Latium)
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Toscana (Tuscany)
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Trentino, Alto Adige and Friuli
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Veneto
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Vinho Verde
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Penedés
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Rioja
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Valencia
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
Bordeaux
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Bourgogne (Burgundy)
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Beaujolais
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Vallée du Rhône
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Languedoc-Roussillon
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Val de Loire (Loire Valley)
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Piemonte (Piedmont)
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Toscana (Tuscany)
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Trentino and Alto Adige
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Veneto
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Dão, Bairrada and Douro
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Navarra
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Penedés
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Rioja
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Valdepeñas
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Wine with a protected geographical indication (PGI)
White
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other varietal wines
White
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
White
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|%|vol but not exceeding 22|%|vol
Wine with a protected designation of origin (PDO) or a protected geographical indication (PGI)
Madeira and Setubal muscatel
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Sherry
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Marsala
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Samos and Muscat de Lemnos
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Port
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Other
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Other
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|%|vol
Other
Wine with a protected designation of origin (PDO) or a protected geographical indication (PGI)
White
Of an actual alcoholic strength by volume not exceeding 13|% vol
Aïn Bessem-Bouira, Médéa, Coteaux du Zaccar, Dahra, Coteaux de Mascara, Monts du Tessalah, Coteaux de Tlemcen
Berkane, Saïs, Beni M'Tir, Guerrouane, Zemmour, Zennata
Coteaux d'Utique, Kelibia, Thibar, Mornag
Other
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Aïn Bessem-Bouira, Médéa, Coteaux du Zaccar, Dahra, Coteaux de Mascara, Monts du Tessalah, Coteaux de Tlemcen
Berkane, Saïs, Beni M'Tir, Guerrouane, Zemmour, Zennata
Coteaux d'Utique, Kelibia, Thibar, Mornag
Other
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Wine of fresh grapes
Of an actual alcoholic strength by volume not exceeding 13|% vol
Aïn Bessem-Bouira, Médéa, Coteaux du Zaccar, Dahra, Coteaux de Mascara, Monts du Tessalah, Coteaux de Tlemcen
Berkane, Saïs, Beni M'Tir, Guerrouane, Zemmour, Zennata
Coteaux de Tebourba, Coteaux d'Utique, Sidi-Salem, Thibar, Mornag, grand cru Mornag
Other
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Aïn Bessem-Bouira, Médéa, Coteaux du Zaccar, Dahra, Coteaux de Mascara, Monts du Tessalah, Coteaux de Tlemcen
Berkane, Saïs, Beni M'Tir, Guerrouane, Zemmour, Zennata
Coteaux de Tebourba, Coteaux d'Utique, Sidi-Salem, Thibar, Mornag, grand cru Mornag
Other
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other varietal wines
White
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Wine of fresh grapes
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
White
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Wine of fresh grapes
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Wine, other than that referred to in subheading|2204|10, in bottles with 'mushroom' stoppers held in place by ties or fastenings; wine, otherwise put up, with an excess pressure due to carbon dioxide in solution of not less than 1|bar but less than 3|bar, measured at a temperature of 20|°C
Other
Produced in the European Union
Of an actual alcoholic strength by volume not exceeding 15|%|vol
Wine with a protected designation of origin (PDO)
White
Tokaj
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Bordeaux
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Bourgogne (Burgundy)
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Val de Loire (Loire Valley)
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
Bordeaux
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Bourgogne (Burgundy)
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Beaujolais
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Vallée du Rhône
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Languedoc-Roussillon
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Val de Loire (Loire Valley)
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Wine with a protected geographical indication (PGI)
White
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other varietal wines
White
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
White
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|%|vol but not exceeding 22|%|vol
Wine with a protected designation of origin (PDO) or a protected geographical indication (PGI)
Madeira and Setubal muscatel
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Sherry
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Marsala
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Samos and Muscat de Lemnos
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Port
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Other
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Other
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|%|vol
Other
Wine with a protected designation of origin (PDO) or a protected geographical indication (PGI)
White
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Wine of fresh grapes
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other varietal wines
White
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Wine of fresh grapes
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
White
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Wine of fresh grapes
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other
Of an actual alcoholic strength by volume not exceeding 13|% vol
Of an actual alcoholic strength by volume exceeding 13|% vol but not exceeding 15|% vol
Of an actual alcoholic strength by volume exceeding 15|% vol but not exceeding 18|% vol
Of an actual alcoholic strength by volume exceeding 18|% vol but not exceeding 22|% vol
Of an actual alcoholic strength by volume exceeding 22|% vol
Other grape must
In fermentation or with fermentation arrested otherwise than by the addition of alcohol
Other
Of a density of 1,33|g/cm$3|or less at 20|°C and of an actual alcoholic strength by volume not exceeding 1|%|vol
Concentrated
Other
Other
Concentrated
Other
Vermouth and other wine of fresh grapes flavoured with plants or aromatic substances
In containers holding 2|litres or less
Of an actual alcoholic strength by volume of 18|%|vol or less
Of an actual alcoholic strength by volume exceeding 18|%|vol
Other
Of an actual alcoholic strength by volume of 18|%|vol or less
Of an actual alcoholic strength by volume exceeding 18|%|vol
Other fermented beverages (for example, cider, perry, mead); mixtures of fermented beverages and mixtures of fermented beverages and non-alcoholic beverages, not elsewhere specified or included
Piquette
Other
Sparkling
Cider and perry
Other
Still, in containers holding
2|litres or less
Cider and perry
Other
More than 2|litres
Cider and perry
Other
Undenatured ethyl alcohol of an alcoholic strength by volume of 80|%|vol or higher; ethyl alcohol and other spirits, denatured, of any strength
Undenatured ethyl alcohol of an alcoholic strength by volume of 80|%|vol or higher
Goods obtained from agricultural products listed in Annex I to the Treaty on the Functioning of the European Union
Ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union), excluding products with a water content of more than 0,3 % (m/m) measured according to the standard EN 15376
For use as fuel
For other uses
Other
Other
Ethyl alcohol and other spirits, denatured, of any strength
Goods obtained from agricultural products listed in Annex I to the Treaty on the Functioning of the European Union
Ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union), excluding products with a water content of more than 0,3|% (m/m) measured according to the standard EN 15376, but including ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) contained in blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
Other
Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80|%|vol; spirits, liqueurs and other spirituous beverages
Spirits obtained by distilling grape wine or grape marc
In containers holding 2|litres or less
Cognac
Armagnac
Grappa
Brandy de Jerez
Other
In containers holding more than 2|litres
Raw distillate
Other
Cognac
Armagnac
Grappa
Brandy de Jerez
Other
Whiskies
Bourbon whiskey, in containers holding
2|litres or less
More than 2|litres
Scotch whisky
Single malt whisky
Blended malt whisky, in containers holding
2|litres or less
More than 2|litres
Single grain whisky and blended grain whisky, in containers holding
2|litres or less
More than 2|litres
Other blended whisky, in containers holding
2|litres or less
More than 2|litres
Other, in containers holding
2|litres or less
More than 2|litres
Rum and other spirits obtained by distilling fermented sugar-cane products
In containers holding 2|litres or less
Rum with a content of volatile substances other than ethyl and methyl alcohol equal to or exceeding 225|grams per hectolitre of pure alcohol (with a 10|% tolerance)
Other
Of a value exceeding €|7,9|per litre of pure alcohol
Other
In containers holding more than 2|litres
Rum with a content of volatile substances other than ethyl and methyl alcohol equal to or exceeding 225|grams per hectolitre of pure alcohol (with a 10|% tolerance)
Other
Of a value exceeding €|2|per litre of pure alcohol
Other
Gin and Geneva
Gin, in containers holding
2|litres or less
More than 2|litres
Geneva, in containers holding
2|litres or less
More than 2|litres
Vodka
Of an alcoholic strength by volume of 45,4|%|vol or less in containers holding
2|litres or less
More than 2|litres
Of an alcoholic strength by volume of more than 45,4|%|vol in containers holding
2|litres or less
More than 2|litres
Liqueurs and cordials
In containers holding 2|litres or less
In containers holding more than 2|litres
Other
Arrack, in containers holding
2|litres or less
More than 2|litres
Plum, pear or cherry spirit (excluding liqueurs), in containers holding
2|litres or less
More than 2|litres
Other spirits and other spirituous beverages, in containers holding
2|litres or less
Ouzo
Other
Spirits (excluding liqueurs)
Distilled from fruit
Calvados
Other
Other
Tequila
Other
Other spirituous beverages
More than 2|litres
Spirits (excluding liqueurs)
Distilled from fruit
Tequila
Other
Other spirituous beverages
Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80|%|vol, in containers holding
2|litres or less
Goods obtained from agricultural products listed in Annex I to the Treaty on the Functioning of the European Union
Other
More than 2|litres
Goods obtained from agricultural products listed in Annex I to the Treaty on the Functioning of the European Union
Ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union), excluding products with a water content of more than 0,3 % (m/m) measured according to the standard EN 15376
For use as fuel
For other uses
Other
Other
Vinegar and substitutes for vinegar obtained from acetic acid
Wine vinegar, in containers holding
2|litres or less
More than 2|litres
Other, in containers holding
2|litres or less
More than 2|litres
RESIDUES AND WASTE FROM THE FOOD INDUSTRIES; PREPARED ANIMAL FODDER
Flours, meals and pellets, of meat or meat offal, of fish or of crustaceans, molluscs or other aquatic invertebrates, unfit for human consumption; greaves
Flours, meals and pellets, of meat or meat offal; greaves
Flours, meals and pellets, of fish or of crustaceans, molluscs or other aquatic invertebrates
Bran, sharps and other residues, whether or not in the form of pellets, derived from the sifting, milling or other working of cereals or of leguminous plants
Of maize (corn)
With a starch content not exceeding 35|% by weight
Other
Of wheat
Of which the starch content does not exceed 28|% by weight, and of which the proportion that passes through a sieve with an aperture of 0,2|mm does not exceed 10|% by weight or alternatively the proportion that passes through the sieve has an ash content, calculated on the dry product, equal to or more than 1,5|% by weight
Other
Of other cereals
Of rice
With a starch content not exceeding 35|% by weight
Other
Other
Of which the starch content does not exceed 28|% by weight, and of which the proportion that passes through a sieve with an aperture of 0,2|mm does not exceed 10|% by weight or alternatively the proportion that passes through the sieve has an ash content, calculated on the dry product, equal to or more than 1,5|% by weight
Other
Of leguminous plants
Residues of starch manufacture and similar residues, beet-pulp, bagasse and other waste of sugar manufacture, brewing or distilling dregs and waste, whether or not in the form of pellets
Residues of starch manufacture and similar residues
Residues from the manufacture of starch from maize (excluding concentrated steeping liquors), of a protein content, calculated on the dry product
Exceeding 40|% by weight
corn gluten
Other
Not exceeding 40|% by weight
Other
Beet-pulp, bagasse and other waste of sugar manufacture
Beet-pulp
Other
Brewing or distilling dregs and waste
Oilcake and other solid residues, whether or not ground or in the form of pellets, resulting from the extraction of soya-bean oil
Oilcake and other solid residues, whether or not ground or in the form of pellets, resulting from the extraction of groundnut oil
Oilcake and other solid residues, whether or not ground or in the form of pellets, resulting from the extraction of vegetable fats or oils, other than those of heading|2304|or 2305
Of cotton seeds
Of linseed
Of sunflower seeds
Of rape or colza seeds
Of low erucic acid rape or colza seeds
Other
Of coconut or copra
Of palm nuts or kernels
Other
Of maize (corn) germ
Other
Oilcake and other residues resulting from the extraction of olive oil
Containing 3|% or less by weight of olive oil
Containing more than 3|% by weight of olive oil
Other
Wine lees; argol
Wine lees
Having a total alcoholic strength by mass not exceeding 7,9|%|mas and a dry matter content not less than 25|% by weight
Other
Argol
Vegetable materials and vegetable waste, vegetable residues and by-products, whether or not in the form of pellets, of a kind used in animal feeding, not elsewhere specified or included
Grape marc
Having a total alcoholic strength by mass not exceeding 4,3|%|mas and a dry matter content not less than 40|% by weight
Other
Acorns and horse-chestnuts; pomace or marc of fruit, other than grapes
Citrus pulp residues
Other
Other
Preparations of a kind used in animal feeding
Dog or cat food, put up for retail sale
Containing starch, glucose, glucose syrup, maltodextrine or maltodextrine syrup of subheadings|1702|30|50, 1702|30|90, 1702|40|90, 1702|90|50|and 2106|90|55|or milk products
Containing starch, glucose, glucose syrup, maltodextrine or maltodextrine syrup
Containing no starch or containing 10|% or less by weight of starch
Containing no milk products or containing less than 10|% by weight of such products
Containing not less than 10|% but less than 50|% by weight of milk products
Containing not less than 50|% but less than 75|% by weight of milk products
Containing not less than 75|% by weight of milk products
Containing more than 10|% but not more than 30|% by weight of starch
Containing no milk products or containing less than 10|% by weight of such products
Containing not less than 10|% but less than 50|% by weight of milk products
Containing not less than 50|% by weight of milk products
Containing more than 30|% by weight of starch
Containing no milk products or containing less than 10|% by weight of such products
Containing not less than 10|% but less than 50|% by weight of milk products
Containing not less than 50|% by weight of milk products
Containing no starch, glucose, glucose syrup, maltodextrine or maltodextrine syrup but containing milk products
Other
Other
Fish or marine mammal solubles
Fish solubles
Fish feed
Other
Marine mammal solubles
Fish feed
Other
Products referred to in additional note|5|to this chapter
Other, including premixes
Containing starch, glucose, glucose syrup, maltodextrine or maltodextrine syrup of subheadings|1702|30|50, 1702|30|90, 1702|40|90, 1702|90|50|and 2106|90|55|or milk products
Containing starch, glucose, glucose syrup, maltodextrine or maltodextrin syrup
Containing no starch or containing 10|% or less by weight of starch
Containing no milk products or containing less than 10|% by weight of such products
Preparation consisting of a mixture of malt sprouts and barley screenings before the malting process (possibly including other seeds) with barley cleanings after the malting process, and containing by weight 12,5|% or more of protein
Containing by weight 15,5|% or more of protein
Other
Fish feed
Other
Containing not less than 10|% but less than 50|% by weight of milk products
Containing not less than 50|% but less than 75|% by weight of milk products
Containing not less than 75|% by weight of milk products
Containing more than 10|% but not more than 30|% by weight of starch
Containing no milk products or containing less than 10|% by weight of such products
Fish feed
Preparation consisting of a mixture of malt sprouts and barley screenings before the malting process (possibly including other seeds) with barley cleanings after the malting process, and containing by weight 12,5|% or more of protein and not more than 28|% of stach
Containing by weight 15,5|% or more of protein and not more than 23|% of stach
Other
Other
Containing not less than 10|% but less than 50|% by weight of milk products
Containing not less than 50|% by weight of milk products
Containing more than 30|% by weight of starch
Containing no milk products or containing less than 10|% by weight of such products
Containing not less than 10|% but less than 50|% by weight of milk products
Containing not less than 50|% by weight of milk products
Containing no starch, glucose, glucose syrup, maltodextrine or maltodextrine syrup but containing milk products
Other
Beet-pulp with added molasses
Other
Mineral and vitamin complex
Other
TOBACCO AND MANUFACTURED TOBACCO SUBSTITUTES
Unmanufactured tobacco; tobacco refuse
Tobacco, not stemmed/stripped
Light air-cured tobacco
Light air-cured Burley type (including Burley hybrids)
Light air-cured Maryland type
Other
whether or not cut in regular size, having a custom value of not less than Euro|450 per 100|kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00
Other
Sun-cured Oriental type tobacco
Dark air-cured tobacco
whether or not cut in regular size, having a custom value of not less than Euro|450 per 100|kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00
Other
Flue-cured tobacco
Flue-cured Virginia type
Other
Other
Fire-cured tobacco
Kentucky type
whether or not cut in regular size, having a custom value of not less than Euro|450 per 100|kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00
Other
Other
whether or not cut in regular size, having a custom value of not less than Euro|450 per 100|kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00
Other
Other tobacco
whether or not cut in regular size, having a custom value of not less than Euro|450 per 100|kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00
Other
Tobacco, partly or wholly stemmed/stripped
Light air-cured tobacco
Light air-cured Burley type (including Burley hybrids)
Light air-cured Maryland type
Other
whether or not cut in regular size, having a custom value of not less than Euro|450 per 100|kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00
Other
Sun-cured Oriental type tobacco
Dark air-cured tobacco
whether or not cut in regular size, having a custom value of not less than Euro|450 per 100|kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00
Other
Flue-cured tobacco
Flue-cured Virginia type
Other
Other
Fire-cured tobacco
Kentucky type
whether or not cut in regular size, having a custom value of not less than Euro|450 per 100|kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00
Other
Other
whether or not cut in regular size, having a custom value of not less than Euro|450 per 100|kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00
Other
Other tobacco
whether or not cut in regular size, having a custom value of not less than Euro|450 per 100|kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 2402 10 00
Other
Tobacco refuse
Cigars, cheroots, cigarillos and cigarettes, of tobacco or of tobacco substitutes
Cigars, cheroots and cigarillos, containing tobacco
Cigarettes containing tobacco
Containing cloves
Other
Other
Other manufactured tobacco and manufactured tobacco substitutes; 'homogenised' or 'reconstituted' tobacco; tobacco extracts and essences
Smoking tobacco, whether or not containing tobacco substitutes in any proportion
Water-pipe tobacco specified in subheading note|1|to this chapter
Other
In immediate packings of a net content not exceeding 500|g
Other
Other
'Homogenised' or 'reconstituted' tobacco
Other
Chewing tobacco and snuff
Other
SALT; SULPHUR; EARTHS AND STONE; PLASTERING MATERIALS, LIME AND CEMENT
Salt (including table salt and denatured salt) and pure sodium chloride, whether or not in aqueous solution or containing added anti-caking or free-flowing agents; sea water
Sea water and salt liquors
Salt (including table salt and denatured salt) and pure sodium chloride, whether or not in aqueous solution or containing added anti-caking or free-flowing agents
For chemical transformation (separation of Na from Cl) for the manufacture of other products
Other
Denatured or for industrial uses (including refining) other than the preservation or preparation of foodstuffs for human or animal consumption
Denatured
For industrial uses (including refining) other than the preservation or preparation of foodstuffs for human or animal consumption
Other
Salt suitable for human consumption
Other
Unroasted iron pyrites
Sulphur of all kinds, other than sublimed sulphur, precipitated sulphur and colloidal sulphur
Crude or unrefined sulphur
Other
Natural graphite
In powder or in flakes
Other
Natural sands of all kinds, whether or not coloured, other than metal-bearing sands of Chapter|26
Silica sands and quartz sands
Other
Quartz (other than natural sands); quartzite, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape
Quartz
Quartzite
Kaolin and other kaolinic clays, whether or not calcined
Kaolin
Other kaolinic clays
Other clays (not including expanded clays of heading|6806), andalusite, kyanite and sillimanite, whether or not calcined; mullite; chamotte or dinas earths
Bentonite
Fireclay
Other clays
Andalusite, kyanite and sillimanite
Mullite
Chamotte or dinas earths
Chalk
Natural calcium phosphates, natural aluminium calcium phosphates and phosphatic chalk
Unground
Ground
Natural barium sulphate (barytes); natural barium carbonate (witherite), whether or not calcined, other than barium oxide of heading|2816
Natural barium sulphate (barytes)
Natural barium carbonate (witherite)
Siliceous fossil meals (for example, kieselguhr, tripolite and diatomite) and similar siliceous earths, whether or not calcined, of an apparent specific gravity of 1|or less
Pumice stone; emery; natural corundum, natural garnet and other natural abrasives, whether or not heat-treated
Pumice stone
Emery, natural corundum, natural garnet and other natural abrasives
Slate, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape
Marble, travertine, ecaussine and other calcareous monumental or building stone of an apparent specific gravity of 2,5|or more, and alabaster, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape
Marble and travertine
Crude or roughly trimmed
Merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape
Ecaussine and other calcareous monumental or building stone; alabaster
Granite, porphyry, basalt, sandstone and other monumental or building stone, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape
Granite
Crude or roughly trimmed
Merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape
Sandstone
Other monumental or building stone
Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling or for railway or other ballast, shingle and flint, whether or not heat-treated; macadam of slag, dross or similar industrial waste, whether or not incorporating the materials cited in the first part of the heading; tarred macadam; granules, chippings and powder, of stones of heading|2515|or 2516, whether or not heat-treated
Pebbles, gravel, broken or crushed stone, of a kind commonly used for concrete aggregates, for road metalling or for railway or other ballast, shingle and flint, whether or not heat-treated
Pebbles, gravel, shingle and flint
Limestone, dolomite and other calcareous stone, broken or crushed
Other
Macadam of slag, dross or similar industrial waste, whether or not incorporating the materials cited in subheading|2517|10
Tarred macadam
Granules, chippings and powder, of stones of heading|2515|or 2516, whether or not heat-treated
Of marble
Other
Dolomite, whether or not calcined or sintered, including dolomite roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape; dolomite ramming mix
Dolomite, not calcined or sintered
Calcined or sintered dolomite
Dolomite ramming mix
Natural magnesium carbonate (magnesite); fused magnesia; dead-burned (sintered) magnesia, whether or not containing small quantities of other oxides added before sintering; other magnesium oxide, whether or not pure
Natural magnesium carbonate (magnesite)
Other
Magnesium oxide, other than calcined natural magnesium carbonate
Fused magnesia with a purity by weight of 97|% or more
Other
Dead-burned (sintered) magnesia
Other
Gypsum; anhydrite; plasters (consisting of calcined gypsum or calcium sulphate) whether or not coloured, with or without small quantities of accelerators or retarders
Gypsum; anhydrite
Plasters
Limestone flux; limestone and other calcareous stone, of a kind used for the manufacture of lime or cement
Quicklime, slaked lime and hydraulic lime, other than calcium oxide and hydroxide of heading|2825
Quicklime
Slaked lime
Hydraulic lime
Portland cement, aluminous cement, slag cement, supersulphate cement and similar hydraulic cements, whether or not coloured or in the form of clinkers
Cement clinkers
Portland cement
White cement, whether or not artificially coloured
Other
Aluminous cement
Other hydraulic cements
Asbestos
Crocidolite
Other
Mica, including splittings; mica waste
Crude mica and mica rifted into sheets or splittings
Mica powder
Mica waste
Natural steatite, whether or not roughly trimmed or merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape; talc
Not crushed, not powdered
Crushed or powdered
Natural borates and concentrates thereof (whether or not calcined), but not including borates separated from natural brine; natural boric acid containing not more than 85|% of H@3BO@3|calculated on the dry weight
Feldspar; leucite; nepheline and nepheline syenite; fluorspar
Feldspar
Fluorspar
Containing by weight 97|% or less of calcium fluoride
Containing by weight more than 97|% of calcium fluoride
Leucite; nepheline and nepheline syenite
Mineral substances not elsewhere specified or included
Vermiculite, perlite and chlorites, unexpanded
Kieserite, epsomite (natural magnesium sulphates)
Other
ORES, SLAG AND ASH
Iron ores and concentrates, including roasted iron pyrites
Iron ores and concentrates, other than roasted iron pyrites
Non-agglomerated
Agglomerated
Roasted iron pyrites
Manganese ores and concentrates, including ferruginous manganese ores and concentrates with a manganese content of 20|% or more, calculated on the dry weight
Copper ores and concentrates
Nickel ores and concentrates
Cobalt ores and concentrates
Aluminium ores and concentrates
Lead ores and concentrates
Zinc ores and concentrates
Tin ores and concentrates
Chromium ores and concentrates
Tungsten ores and concentrates
Uranium or thorium ores and concentrates
Uranium ores and concentrates
Uranium ores and pitchblende, and concentrates thereof, with a uranium content of more than 5|% by weight
Other
Thorium ores and concentrates
Monazite; urano-thorianite and other thorium ores and concentrates, with a thorium content of more than 20|% by weight
Other
Molybdenum ores and concentrates
Roasted
Other
Titanium ores and concentrates
Niobium, tantalum, vanadium or zirconium ores and concentrates
Zirconium ores and concentrates
Other
Precious-metal ores and concentrates
Silver ores and concentrates
Other
Other ores and concentrates
Antimony ores and concentrates
Other
Granulated slag (slag sand) from the manufacture of iron or steel
Slag, dross (other than granulated slag), scalings and other waste from the manufacture of iron or steel
Waste suitable for the recovery of iron or manganese
Other
Slag, ash and residues (other than from the manufacture of iron or steel), containing metals, arsenic or their compounds
Containing mainly zinc
Hard zinc spelter
Other
Containing mainly lead
Leaded gasoline sludges and leaded anti-knock compound sludges
Other
Containing mainly copper
Containing mainly aluminium
Containing arsenic, mercury, thallium or their mixtures, of a kind used for the extraction of arsenic or those metals or for the manufacture of their chemical compounds
Other
Containing antimony, beryllium, cadmium, chromium or their mixtures
Other
Containing mainly nickel
Containing mainly niobium or tantalum
Containing mainly tin
Containing mainly titanium
Other
Other slag and ash, including seaweed ash (kelp); ash and residues from the incineration of municipal waste
Ash and residues from the incineration of municipal waste
Other
MINERAL FUELS, MINERAL OILS AND PRODUCTS OF THEIR DISTILLATION; BITUMINOUS SUBSTANCES; MINERAL WAXES
Coal; briquettes, ovoids and similar solid fuels manufactured from coal
Coal, whether or not pulverised, but not agglomerated
Anthracite
Bituminous coal
Coking coal
Other
Other coal
Briquettes, ovoids and similar solid fuels manufactured from coal
Lignite, whether or not agglomerated, excluding jet
Lignite, whether or not pulverised, but not agglomerated
Agglomerated lignite
Peat (including peat litter), whether or not agglomerated
Coke and semi-coke of coal, of lignite or of peat, whether or not agglomerated; retort carbon
Coke and semi-coke of coal
Coke and semi-coke of lignite
Other
Coal gas, water gas, producer gas and similar gases, other than petroleum gases and other gaseous hydrocarbons
Tar distilled from coal, from lignite or from peat, and other mineral tars, whether or not dehydrated or partially distilled, including reconstituted tars
Oils and other products of the distillation of high temperature coal tar; similar products in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents
Benzol (benzene)
For use as a power or heating fuel
For other purposes
Toluol (toluene)
For use as a power or heating fuel
For other purposes
Xylol (xylenes)
For use as a power or heating fuel
For other purposes
Naphthalene
Other aromatic hydrocarbon mixtures of which 65|% or more by volume (including losses) distils at 250|°C by the ASTM|D|86|method
Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol content by weight of 62|% or more but less than 95|%
Other
For use as power or heating fuels
For other purposes
Other
Creosote oils
Other
Crude oils
Crude light oils of which 90|% or more by volume distils at temperatures of up to 200|°C
Other
Sulphuretted toppings; anthracene
Basic products
Phenols
Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol content by weight of 62|% or more but less than 95|%
Other
Other
For the manufacture of the products of heading|2803
Other
Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5|to Chapter 27
Other
Pitch and pitch coke, obtained from coal tar or from other mineral tars
Pitch
Pitch coke
Petroleum oils and oils obtained from bituminous minerals, crude
Natural gas condensates
Other
Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70|% or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils
Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70|% or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils
Light oils and preparations
For undergoing a specific process
For undergoing chemical transformation by a process other than those specified in respect of subheading|2710|12|11
For other purposes
Special spirits
White spirit
Blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
Other
Blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
Other
Motor spirit
Aviation spirit
Blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
Other, with a lead content
Not exceeding 0,013|g per litre
With an octane number (RON) of less than 95
Blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
With an octane number (RON) of 95|or more but less than 98
Blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
With an octane number (RON) of 98|or more
Blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
Exceeding 0,013|g per litre
With an octane number (RON) of less than 98
Blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
With an octane number (RON) of 98|or more
Blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
Spirit type jet fuel
Blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
Other light oils
Blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
Other
Medium oils
For undergoing a specific process
For undergoing chemical transformation by a process other than those specified in respect of subheading|2710|19|11
For other purposes
Kerosene
Jet fuel
Other
Other
Heavy oils
Gas oils
For undergoing a specific process
For undergoing chemical transformation by a process other than those specified in respect of subheading|2710|19|31
For other purposes
With a sulphur content not exceeding 0,001|% by weight
Paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin, in pure form; blends containing by weight more than 20|% of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Consigned from Canada
Other
Blends containing by weight 20|% or less of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Other
With a sulphur content exceeding 0,001|% by weight but not exceeding 0,002|% by weight
Paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin, in pure form; blends containing by weight more than 20|% of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Consigned from Canada
Other
Blends containing by weight 20|% or less of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Other
With a sulphur content exceeding 0,002|% by weight but not exceeding 0,1|% by weight
Paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin, in pure form; blends containing by weight more than 20% of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Consigned from Canada
Other
Blends containing by weight 20|% or less of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Other
With a sulphur content exceeding 0,1|% by weight
With a sulphur content not exceeding 0,2|% by weight
Other
Fuel oils
For undergoing a specific process
For undergoing chemical transformation by a process other than those specified in respect of subheading|2710|19|51
For other purposes
With a sulphur content not exceeding 0,1|% by weight
With a sulphur content exceeding 0,1|% by weight but not exceeding 1|% by weight
With a sulphur content exceeding 1|% by weight
Lubricating oils; other oils
For undergoing a specific process
For undergoing chemical transformation by a process other than those specified in respect of subheading|2710|19|71
For other purposes
Motor oils, compressor lube oils, turbine lube oils
Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing: -|90|% or more by weight of saturates, and -|not more than 0,03|% by weight of sulphur, with a viscosity index of 80|or more
Other
Liquids for hydraulic purposes
White oils, liquid paraffin
Gear oils and reductor oils
Metal-working compounds, mould-release oils, anti-corrosion oils
Electrical insulating oils
Other lubricating oils and other oils
Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy paraffin conversion process (HPC), containing: -|not more than 1|mg/kg of sulphur -|more than 99|% by weight of saturated hydrocarbons -|more than 75|% by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18|or more but not more than 50; and -|a kinematic viscosity at 40|°C of more than 6,5|mm$2/s, or -|a kinematic viscosity at 40|°C of more than 11|mm$2/s with a viscosity index of 120|or more
Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing: -|90|% or more by weight of saturates, and -|not more than 0,03|% by weight of sulphur, with a viscosity index of 80|or more
Other
Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70|% or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, containing biodiesel, other than waste oils
Gas oils
With a sulphur content not exceeding 0,001|% by weight
Blends containing by weight more than 20|% of fatty-acid mono-alkyl esters or of a mixture of fatty-acid mono-alkyl esters and paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Consigned from Canada
Other
Blends containing by weight 20|% or less of fatty-acid mono-alkyl esters or of a mixture of fatty-acid mono-alkyl esters and paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
With a sulphur content exceeding 0,001|% by weight but not exceeding 0,002|% by weight
Blends containing by weight more than 20|% of fatty-acid mono-alkyl esters or of a mixture of fatty-acid mono-alkyl esters and paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Consigned from Canada
Other
Blends containing by weight 20|% or less of fatty-acid mono-alkyl esters or of a mixture of fatty-acid mono-alkyl esters and paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
With a sulphur content exceeding 0,002|% by weight but not exceeding 0,1|% by weight
With a sulphur content exceeding 0,002|% by weight but not exceeding 0,05|% by weight
Blends containing by weight more than 20|% of fatty-acid mono-alkyl esters or of a mixture of fatty-acid mono-alkyl esters and paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Consigned from Canada
Other
Blends containing by weight 20|% or less of fatty-acid mono-alkyl esters or of a mixture of fatty-acid mono-alkyl esters and paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
With a sulphur content exceeding 0,05|% by weight but not exceeding 0,1|% by weight
With a sulphur content exceeding 0,1|% by weight
With a sulphur content not exceeding 0,2|% by weight
Other
Fuel oils
With a sulphur content not exceeding 0,1|% by weight
With a sulphur content exceeding 0,1|% by weight but not exceeding 1|% by weight
With a sulphur content exceeding 1|% by weight
Other oils
Waste oils
Containing polychlorinated biphenyls (PCBs), polychlorinated terphenyls (PCTs) or polybrominated biphenyls (PBBs)
Other
For undergoing a specific process
Other
Petroleum gases and other gaseous hydrocarbons
Liquefied
Natural gas
Propane
Propane of a purity of not less than 99|%
For use as a power or heating fuel
For other purposes
Other
For undergoing a specific process
For undergoing chemical transformation by a process other than those specified in respect of subheading|2711|12|91
For other purposes
Of a purity exceeding 90|% but of less than 99|%
Other
Butanes
For undergoing a specific process
For undergoing chemical transformation by a process other than those specified in respect of subheading|2711|13|10
For other purposes
Of a purity exceeding 90|% but of less than 95|%
Other
Ethylene, propylene, butylene and butadiene
Other
In gaseous state
Natural gas
Other
Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes, and similar products obtained by synthesis or by other processes, whether or not coloured
Petroleum jelly
Crude
Other
Paraffin wax containing by weight less than 0,75|% of oil
Synthetic paraffin wax of a molecular weight of 460|or more but not exceeding 1|560
Other
Other
Ozokerite, lignite wax or peat wax (natural products)
Crude
Other
Other
Crude
For undergoing a specific process
For undergoing chemical transformation by a process other than those specified in respect of subheading|2712|90|31
For other purposes
Other
Blend of 1-alkenes containing by weight 80|% or more of 1-alkenes of a chain-length of 24|carbon atoms or more but not exceeding 28|carbon atoms
Other
Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous minerals
Petroleum coke
Not calcined
Calcined
Petroleum bitumen
Other residues of petroleum oils or of oils obtained from bituminous minerals
For the manufacture of the products of heading|2803
Other
Bitumen and asphalt, natural; bituminous or oil-shale and tar sands; asphaltites and asphaltic rocks
Bituminous or oil-shale and tar sands
Other
Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch (for example, bituminous mastics, cut-backs)
Electrical energy
INORGANIC CHEMICALS; ORGANIC OR INORGANIC COMPOUNDS OF PRECIOUS METALS, OF RARE-EARTH METALS, OF RADIOACTIVE ELEMENTS OR OF ISOTOPES
I. CHEMICAL ELEMENTS
Fluorine, chlorine, bromine and iodine
Chlorine
Iodine
Fluorine; bromine
Fluorine
Bromine
Sulphur, sublimed or precipitated; colloidal sulphur
Carbon (carbon blacks and other forms of carbon not elsewhere specified or included)
Hydrogen, rare gases and other non-metals
Hydrogen
Rare gases
Argon
Other
Helium
Other
Nitrogen
Oxygen
Boron; tellurium
Boron
Tellurium
Tellurium of a purity by weight of 99.99|% or more, but not more than 99.999|% by weight (CAS RN 13494-80-9)
Other
Silicon
Containing by weight not less than 99,99|% of silicon
Other
Consigned from the Republic of Korea
Consigned from Taiwan
Other
Phosphorus
Arsenic
Selenium
Alkali or alkaline-earth metals; rare-earth metals, scandium and yttrium, whether or not intermixed or interalloyed; mercury
Alkali or alkaline-earth metals
Sodium
Calcium
Calcium with a purity of 98|% or more by weight, in powder or wire form (CAS|RN|7440-70-2)
Other
Other
Strontium and barium
Other
Lithium metal of a purity by weight of 98,8|% or more (CAS|RN 7439-93-2)
Other
Rare-earth metals, scandium and yttrium, whether or not intermixed or interalloyed
Intermixtures or interalloys
Alloy of cerium with other rare-earth metals, containing by weight 47 % or more of cerium
Other
Containing both neodymium and dysprosium
Containing neodymium
Containing dysprosium
Other
Other
Of a purity by weight of 95% or more
Cerium, lanthanum, praseodymium, neodymium and samarium
Cerium
Lanthanum
Praseodymium
Neodymium
Samarium
Europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium and yttrium
Europium
Gadolinium
Terbium
Dysprosium
Holmium
Erbium
Thulium
Ytterbium
Lutetium
Yttrium
Scandium
Other
Mercury
In flasks of a net content of 34,5|kg (standard weight), of a fob value, per flask, not exceeding €|224
Other
II. INORGANIC ACIDS AND INORGANIC OXYGEN COMPOUNDS OF NON-METALS
Hydrogen chloride (hydrochloric acid); chlorosulphuric acid
Hydrogen chloride (hydrochloric acid)
Chlorosulphuric acid
Sulphuric acid; oleum
Nitric acid; sulphonitric acids
Diphosphorus pentaoxide; phosphoric acid; polyphosphoric acids, whether or not chemically defined
Diphosphorus pentaoxide
Phosphoric acid and polyphosphoric acids
Oxides of boron; boric acids
Diboron trioxide
Other
Other inorganic acids and other inorganic oxygen compounds of non-metals
Other inorganic acids
Hydrogen fluoride (hydrofluoric acid)
Other
Hydrogen bromide (hydrobromic acid)
Hydrogen cyanide (hydrocyanic acid)
Other
Sulphamidic acid (CAS RN 5329-14-6)
Hydrogen iodide (CAS RN 10034-85-2)
Phosphorous acid (CAS RN 10294-56-1)/phosphonic acid (CAS RN 13598-36-2) used as an ingredient for production of additives used in poly(vinyl chloride) industry
Other
Other inorganic oxygen compounds of non-metals
Carbon dioxide
Silicon dioxide
Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges
Balls of porous white silica of a particle size of more than 1|µm for use in the manufacture of cosmetic products
Silica filler in the form of granules, with a purity by weight of 97|% or more of silicon dioxide
Calcined amorphous silicon dioxide powder -|with a particle size of not more than 20|µm, and -|of a kind used in the production of polyethylene
Amorphous silicon dioxide (CAS RN 60676-86-0), -|in the form of powder -|of a purity by weight of 99,7|% or more -|with a median grain size of 0,7|µm or more, but not more than 2,1|µm -|where 70|% of the particles have a diameter of not more than 3|µm
Other
Other
Sulphur dioxide
Sulphur trioxide (sulphuric anhydride); diarsenic trioxide
Nitrogen oxides
Other
III. HALOGEN OR SULPHUR COMPOUNDS OF NON-METALS
Halides and halide oxides of non-metals
Chlorides and chloride oxides
Of phosphorus
Phosphorus trichloride oxide (phosphoryl trichloride)
Phosphorus trichloride
Phosphorus pentachloride
Other
Other
Disulphur dichloride
Sulphur dichloride
Phosgene (carbonyl chloride)
Thionyl dichloride (thionyl chloride)
Other
Other
Nitrogen trifluoride (CAS RN 7783-54-2)
Other
Sulphides of non-metals; commercial phosphorus trisulphide
Carbon disulphide
Other
Phosphorus sulphides, commercial phosphorus trisulphide
Other
IV. INORGANIC BASES AND OXIDES, HYDROXIDES AND PEROXIDES OF METALS
Ammonia, anhydrous or in aqueous solution
Anhydrous ammonia
Ammonia in aqueous solution
Sodium hydroxide (caustic soda); potassium hydroxide (caustic potash); peroxides of sodium or potassium
Sodium hydroxide (caustic soda)
Solid
In aqueous solution (soda lye or liquid soda)
Potassium hydroxide (caustic potash)
Peroxides of sodium or potassium
Hydroxide and peroxide of magnesium; oxides, hydroxides and peroxides, of strontium or barium
Hydroxide and peroxide of magnesium
Oxides, hydroxides and peroxides, of strontium or barium
Barium hydroxide (CAS RN 17194-00-2)
Other
Zinc oxide; zinc peroxide
Artificial corundum, whether or not chemically defined; aluminium oxide; aluminium hydroxide
Artificial corundum, whether or not chemically defined
With an aluminium oxide content of 98,5|% by weight or more
With less than 50|% of the total weight having a particle size of more than 10|mm
With 50|% or more of the total weight having a particle size of more than 10|mm
With an aluminium oxide content of less than 98,5|% by weight
With less than 50|% of the total weight having a particle size of more than 10|mm
Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS|RN|1344-28-1), magnesium aluminate (CAS|RN|12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of: -|94|% or more, but less than 98,5|% of aluminium oxide, -|2|% (± 1,5|%) of magnesium oxide, -|1|% (± 0,6|%) of yttrium oxide, and -|either 2|% (± 1,2|%) of lanthanum oxide or -|2|% (± 1,2|%) of lanthanum oxide and neodymium oxide, with less than 50|% of the total weight having a particle size of more than 10|mm
Other
With 50|% or more of the total weight having a particle size of more than 10|mm
Aluminium oxide, other than artificial corundum
Activated alumina with a specific surface area of at least 350|m$2/g
Other
Aluminium hydroxide
Aluminium hydroxide oxide in the form of pseudo-boehmite
Aluminium hydroxide (CAS RN 21645-51-2) -|in the form of powder -|with a purity by weight of 99,5|% or more -|with a decomposition point of 263o C or more -|with| a particle size of 4|µm (± 1|µm) -|with a Total-Na2O-content by weight of not more than 0,06|%
Other
Chromium oxides and hydroxides
Chromium trioxide
Other
Chromium dioxide
Other
Dichromium trioxide for use in metallurgy (CAS RN 1308-38-9)
Other
Manganese oxides
Manganese dioxide
Electrolytic manganese dioxides (i.e. manganese dioxides produced through an electrolytic process) not heat treated after the electrolytic process
Other
Other
Manganese oxide containing by weight 77|% or more of manganese
Other
Iron oxides and hydroxides; earth colours containing 70|% or more by weight of combined iron evaluated as Fe@2O@3
Iron oxides and hydroxides
Earth colours
Cobalt oxides and hydroxides; commercial cobalt oxides
Titanium oxides
Titanium dioxide (CAS RN 13463-67-7): -|of a purity by weight of 99,9|% or more, -|with an average grain-size of 0,7|μm or more but not more than 2,1|μm
Titanium dioxide (CAS RN 13463-67-7)|with a purity by weight of 99,7|% or more|and|containing by weight: -|not more than 0,005|% of potassium and sodium combined (expressed as elemental sodium and elemental potassium), -|not more than 0,01|% of phosphorus (expressed as elemental phosphorus), for use in the metallurgy
Other
Lead oxides; red lead and orange lead
Lead monoxide (litharge, massicot)
Other
Hydrazine and hydroxylamine and their inorganic salts; other inorganic bases; other metal oxides, hydroxides and peroxides
Hydrazine and hydroxylamine and their inorganic salts
Hydroxylammonium chloride (CAS RN 5470-11-1)
Other
Lithium oxide and hydroxide
Vanadium oxides and hydroxides
Exclusively for use in alloys
Other
Nickel oxides and hydroxides
Copper oxides and hydroxides
Copper (I or II) oxide containing by weight 78|% or more of copper and not more than 0,03|% of chloride
Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100|nm
Other
Germanium oxides and zirconium dioxide
Zirconium dioxide (CAS RN 1314-23-4)
Other
Molybdenum oxides and hydroxides
Antimony oxides
Other
Calcium oxide, hydroxide and peroxide
Calcium hydroxide of a purity of 98|% or more calculated on the dry weight, in the form of particles of which:-|not more than 1|% by weight have a particle-size exceeding 75|micrometres and-|not more than 4|% by weight have a particle-size of less than 1,3|micrometres
Other
Beryllium oxide and hydroxide
Tungsten oxides and hydroxides
Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8)
Other
Cadmium oxide
Other
V. SALTS AND PEROXYSALTS, OF INORGANIC ACIDS AND METALS
Fluorides; fluorosilicates, fluoroaluminates and other complex fluorine salts
Fluorides
Of aluminium
Other
Of ammonium or of sodium
Other
Tungsten hexafluoride with a purity of|99,9|% by weight|or more (CAS RN 7783-82-6)
Other
Sodium hexafluoroaluminate (synthetic cryolite)
Other
Dipotassium hexafluorozirconate
Other
Lithium hexafluorophosphate (CAS RN 21324-40-3)
Other
Chlorides, chloride oxides and chloride hydroxides; bromides and bromide oxides; iodides and iodide oxides
Ammonium chloride
Calcium chloride
Other chlorides
Of magnesium
Of aluminium
Of nickel
Other
Of tin
Of iron
Of cobalt
Other
Copper monochloride of a purity by weight of 96|% or more but not more than 99|% (CAS RN 7758-89-6)
Antimony pentachloride of a purity by weight of 99|% or more (CAS RN 7647-18-9)
Barium chloride dihydrate (CAS RN| 10326-27-9)
Other
Chloride oxides and chloride hydroxides
Of copper
Other
Of lead
Other
Hydrated zirconium dichloride oxide
Other
Bromides and bromide oxides
Bromides of sodium or of potassium
Other
Iodides and iodide oxides
Sodium iodide (CAS|RN|7681-82-5)
Other
Hypochlorites; commercial calcium hypochlorite; chlorites; hypobromites
Commercial calcium hypochlorite and other calcium hypochlorites
Other
Chlorates and perchlorates; bromates and perbromates; iodates and periodates
Chlorates
Of sodium
Other
Other
Perchlorates
Bromates of potassium or of sodium
Other
Sulphides; polysulphides, whether or not chemically defined
Sodium sulphides
Disodium tetrasulfide, containing by weight 38|% or less of sodium calculated on the dry weight
Other
Other
Sulphides of calcium, of antimony or of iron
Other
Dithionites and sulphoxylates
Of sodium
Other
Sulphites; thiosulphates
Sodium sulphites
Other sulphites
Thiosulphates
Sulphates; alums; peroxosulphates (persulphates)
Sodium sulphates
Disodium sulphate
Other
Other sulphates
Of magnesium
Of aluminium
Of nickel
Of copper
Of barium
Other
Of cadmium; of chromium; of zinc
Of cobalt; of titanium
Of lead
Other
Manganese sulphate monohydrate (CAS RN 10034-96-5)
Zirconium sulphate (CAS RN 14644-61-2)
Other
Alums
Peroxosulphates (persulphates)
Nitrites; nitrates
Nitrites
Nitrates
Of potassium
Other
Of barium; of beryllium; of cadmium; of cobalt; of nickel; of lead
Of copper
Other
Phosphinates (hypophosphites), phosphonates (phosphites) and phosphates; polyphosphates, whether or not chemically defined
Phosphinates (hypophosphites) and phosphonates (phosphites)
Sodium hypophosphite monohydrate (CAS RN 10039-56-2)
Sodium hypophosphite| (CAS|RN|7681-53-0)
Other
Phosphates
Of mono- or disodium
Of potassium
Calcium hydrogenorthophosphate ('dicalcium phosphate')
Other phosphates of calcium
Other
Of triammonium
Of trisodium
Other
Polyphosphates
Sodium triphosphate (sodium tripolyphosphate)
Other
Carbonates; peroxocarbonates (percarbonates); commercial ammonium carbonate containing ammonium carbamate
Disodium carbonate
Sodium hydrogencarbonate (sodium bicarbonate)
Potassium carbonates
Calcium carbonate
Barium carbonate
Barium carbonate with a strontium content of more than 0,07% by weight and a sulphur content of more than 0,0015% by weight, whether in powder, pressed granular or calcined granular form
Other
Other
Lithium carbonates
Lithium carbonate, containing one or more of the following impurities at the concentrations indicated: -|2|mg/kg or more of arsenic, -|200|mg/kg or more of calcium, -|200|mg/kg or more of chlorides, -|20|mg/kg or more of iron, -|150|mg/kg or more of magnesium, -|20|mg/kg or more of heavy metals, -|300|mg/kg or more of potassium, -|300|mg/kg or more of sodium, -|200|mg/kg or more of sulphates, determined according to the methods specified in the European Pharmacopœia
Other
Strontium carbonate
Other
Carbonates
Of magnesium; of copper
Other
Zirconium (IV) basic carbonate (CAS RN 57219-64-4|or 37356-18-6) with a purity by weight of 96|% or more
Other
Peroxocarbonates (percarbonates)
Cyanides, cyanide oxides and complex cyanides
Cyanides and cyanide oxides
Of sodium
Other
Copper cyanide (CAS RN 544-92-3)
Other
Complex cyanides
Tetrasodium hexacyanoferrate (II), (CAS RN 13601-19-9)
Ammonium iron (III) hexacyanoferrate (II) (CAS RN 25869-00-5)
Other
Silicates; commercial alkali metal silicates
Of sodium
Sodium metasilicates
Other
Disodium disilicate|(CAS RN 13870-28-5)
Other
Other
Calcium silicate (CAS RN|1344-95-2)
Other
Borates; peroxoborates (perborates)
Disodium tetraborate (refined borax)
Anhydrous
Other
Disodium tetraborate pentahydrate
Other
Other borates
Borates of sodium, anhydrous
Other
Zinc borate (CAS RN 12767-90-7)
Other
Peroxoborates (perborates)
Salts of oxometallic or peroxometallic acids
Sodium dichromate
Other chromates and dichromates; peroxochromates
Manganites, manganates and permanganates
Potassium permanganate
Other
Molybdates
Diammonium tetraoxomolybdate(2-) (CAS|RN|13106-76-8)
Diammonium tridecaoxotetramolybdate(2-) (CAS RN 12207-64-6)
Hexaammonium heptamolybdate, anhydrous (CAS|RN|12027-67-7) or as tetrahydrate (CAS|RN|12054-85-2)
Other
Tungstates (wolframates)
Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)
Other
Other
Zincates and vanadates
Other
Lithium cobalt(III) oxide with a cobalt content of at least 59|%|(CAS RN 12190-79-3)
Potassium titanium oxide in powder form with a purity of 99|% or more (CAS|RN|12056-51-8)
Other
Other salts of inorganic acids or peroxoacids (including aluminosilicates whether or not chemically defined), other than azides
Double or complex silicates, including aluminosilicates whether or not chemically defined
Synthetic Beta Zeolite powder
Synthetic Chabasite Zeolite Powder
Other
Other
Salts, double salts or complex salts of selenium or tellurium acids
Sodium selenate (CAS RN 13410-01-0)
Other
Other
Potassium peroxymonosulphate sulphate
Other
VI. MISCELLANEOUS
Colloidal precious metals; inorganic or organic compounds of precious metals, whether or not chemically defined; amalgams of precious metals
Colloidal precious metals
Silver
Other
Silver compounds
Silver nitrate
Other
Silver oxide, nitrate- and carbonate-free, with a silver content of at least 99.99|% by weight of the metal content, for the manufacture of silver oxide batteries
Other
Gold compounds
Other compounds; amalgams
Amalgams
Other
Radioactive chemical elements and radioactive isotopes (including the fissile or fertile chemical elements and isotopes) and their compounds; mixtures and residues containing these products
Natural uranium and its compounds; alloys, dispersions (including cermets), ceramic products and mixtures containing natural uranium or natural uranium compounds
Natural uranium
Crude; waste and scrap
Worked
Ferro-uranium
Other
Uranium enriched in U|235|and its compounds; plutonium and its compounds; alloys, dispersions (including cermets), ceramic products and mixtures containing uranium enriched in U|235, plutonium or compounds of these products
Uranium enriched in U|235|and its compounds; alloys, dispersions (including cermets), ceramic products and mixtures containing uranium enriched in U|235|or compounds of these products
Ferro-uranium
Other
Plutonium and its compounds; alloys, dispersions (including cermets), ceramic products and mixtures containing plutonium or compounds of these products
Mixtures of uranium and plutonium
Ferro-uranium
Other
Other
Uranium depleted in U|235|and its compounds; thorium and its compounds; alloys, dispersions (including cermets), ceramic products and mixtures containing uranium depleted in U|235, thorium or compounds of these products
Uranium depleted in U|235; alloys, dispersions (including cermets), ceramic products and mixtures containing uranium depleted in U|235|or compounds of this product
Cermets
Unwrought; waste and scrap
Other
Other
Thorium; alloys, dispersions (including cermets), ceramic products and mixtures containing thorium or compounds of this product
Cermets
Unwrought; waste and scrap
Other
Other
Crude, waste and scrap
Worked
Bars, rods, angles, shapes and sections, sheets and strips
Other
Compounds of uranium depleted in U|235|or of thorium, whether or not mixed together
Of thorium or of uranium depleted in U|235, whether or not mixed together , other than thorium salts
Other
Radioactive elements and isotopes and compounds other than those of subheading|2844|10, 2844|20|or 2844|30; alloys, dispersions (including cermets), ceramic products and mixtures containing these elements, isotopes or compounds; radioactive residues
Uranium derived from U|233|and its compounds; alloys, dispersions (including cermets), ceramic products and mixtures and compounds derived from U|233|or compounds of this product
Other
Artificial radioactive isotopes
Compounds of artificial radioactive isotopes
Other
Spent (irradiated) fuel elements (cartridges) of nuclear reactors
Isotopes other than those of heading|2844; compounds, inorganic or organic, of such isotopes, whether or not chemically defined
Heavy water (deuterium oxide)
Other
Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products
Other
Helium-3|(CAS RN 14762-55-1)
Water enriched at a level of 95|% or more by weight with oxygen-18|(CAS RN 14314-42-2)
($1$3C)Carbon monoxide|(CAS RN 1641-69-6)
Iron boride enriched at a level of more than 95|% by weight with boron-10|(CAS RN 200513-39-9)
other
Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals
Cerium compounds
Rare-earth concentrate containing by weight 60|% or more but not more than 95|% of rare-earth oxides and not more than 1|% each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5|% or more by weight
Dicerium tricarbonate, whether or not hydrated (CAS RN 537-01-9)
Cerium lanthanum carbonate, whether or not hydrated
Other
Other
Compounds of lanthanum, praseodymium, neodymium or samarium
Lanthanum compounds
Praseodymium compounds
Neodymium compounds
Samarium compounds
Compounds of europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium, lutetium or yttrium
Europium compounds
Gadolinium compounds
Terbium compounds
Dysprosium compounds
Holmium compounds
Erbium compounds
Thulium compounds
Ytterbium compounds
Lutetium compounds
Yttrium compounds
Scandium compounds
Compounds of mixtures of metals
Hydrogen peroxide, whether or not solidified with urea
Phosphides, whether or not chemically defined, excluding ferrophosphorus
Phosphine (CAS RN 7803-51-2)
Other
Carbides, whether or not chemically defined
Of calcium
Of silicon
Other
Of boron
Of tungsten
Of aluminium; of chromium; of molybdenum; of vanadium; of tantalum; of titanium
Other
Hydrides, nitrides, azides, silicides and borides, whether or not chemically defined, other than compounds which are also carbides of heading|2849
Hydrides; nitrides
Silane (CAS RN 7803-62-5)
Arsine (CAS RN 7784-42-1)
Titanium nitride with a particle size of not more than 250|nm (CAS RN|25583-20-4)
Germanium tetrahydride (CAS RN 7782-65-2)
Sodium tetrahydroborate (CAS 16940-66-2) with: -|a purity by weight of 98|% or more and -|not more than 10ppm iron for use as an additive in the manufacture of oxygen barrier polymer articles
Other
Azides; silicides
Azides
Sodium azide (CAS RN 26628-22-8)
Other
Silicides
Borides
Inorganic or organic compounds of mercury, whether or not chemically defined, excluding amalgams
Chemically defined
Other
Other inorganic compounds (including distilled or conductivity water and water of similar purity); liquid air (whether or not rare gases have been removed); compressed air; amalgams, other than amalgams of precious metals
Distilled and conductivity water and water of similar purity
Liquid air (whether or not rare gases have been removed); compressed air
Cyanogen chloride
Other
Chlorosulphonyl isocyanate (CAS RN 1189-71-5)
Other
ORGANIC CHEMICALS
I. HYDROCARBONS AND THEIR HALOGENATED, SULPHONATED, NITRATED OR NITROSATED DERIVATIVES
Acyclic hydrocarbons
Saturated
Unsaturated
Ethylene
Propene (propylene)
Butene (butylene) and isomers thereof
Buta-1,3-diene and isoprene
Other
Cyclic hydrocarbons
Cyclanes, cyclenes and cycloterpenes
Cyclohexane
Other
Benzene
Toluene
Xylenes
o-Xylene
m-Xylene
p-Xylene
Mixed xylene isomers
Styrene
Ethylbenzene
Cumene
Other
Halogenated derivatives of hydrocarbons
Saturated chlorinated derivatives of acyclic hydrocarbons
Chloromethane (methyl chloride) and chloroethane (ethyl chloride)
Dichloromethane (methylene chloride)
Chloroform (trichloromethane)
Carbon tetrachloride
Ethylene dichloride (ISO) (1,2-dichloroethane)
Other
1,1,1-Trichloroethane (methylchloroform)
Other
Unsaturated chlorinated derivatives of acyclic hydrocarbons
Vinyl chloride (chloroethylene)
Trichloroethylene
Tetrachloroethylene (perchloroethylene)
Other
Fluorinated, brominated or iodinated derivatives of acyclic hydrocarbons
Ethylene dibromide (ISO) (1,2-dibromoethane)
Other
Bromides
Bromomethane (methyl bromide)
Dibromomethane
Other
1-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity not less than 99,0|% and containing not more than: -|0,25|% of Sec-butyl bromide -|0,06|% of n-butyl bromide -|0,06|% of n-propyl bromide
Other
Saturated fluorides
Difluoromethane
Trifluoromethane
Pentafluoroethane and 1,1,1-trifluoroethane
Pentafluoroethane (CAS|RN|354-33-6)
Other
1,1-difluoroethane
1,1-Difluoroethane (CAS RN 75-37-6)
Other
1,1,1,2-tetrafluoroethane
1,1,1,2-Tetrafluoroethane feedstock for pharmaceutical grade production conforming to the following specification: - not more than 600ppm by weight of R134 (1,1,2,2-tetrafluoroethane), - not more than 5ppm by weight of R143a (1,1,1-trifluoroethane), - not more than 2ppm by weight of R125 (pentafluoroethane), - not more than 100ppm by weight of R124 (1-chloro-1,2,2,2-tetrafluoroethane), - not more than 30ppm by weight of R114 (1,2-dichlorotetrafluoroethane), - not more than 50ppm by weight of R114a (1,1-Dichlorotetrafluoroethane), - not more than 250ppm by weight of R133a (1-Chloro-2,2,2-Trifluoroethane), - not more than 2ppm by weight of R22 (Chlorodifluoromethane), - not more than 2ppm by weight of R115 (Chloropentafluoroethane), - not more than 2ppm by weight of R12 (Dichlorodifluoromethane), - not more than 20ppm by weight of R40 (Methyl chloride), - not more than 20ppm by weight of R245cb (1,1,1,2,2-pentafluoropropane), - not more than 20ppm by weight of R12B1 (Chlorodifluorobromomethane), - not more than 20ppm by weight of R32 (Difluoromethane), - not more than 15ppm by weight of R31 (Chlorofluoromethane), - not more than 10ppm by weight of R152a (1,1-Difluoroethane), - not more than 20ppm by weight of 1131 (1-Chloro-2 Fluoroethylene), - not more than 20ppm by weight of 1122 (1-Chloro-2,2-Difluoroethylene), - not more than 3ppm by weight of 1234yf (2,3,3,3-Tetrafluoropropene), - not more than 3ppm by weight of 1243zf (3,3,3 Trifluoropropene), - not more than 3ppm by weight of 1122a (1-chloro-1,2-difluoroethylene), - not more than 4.5ppm by weight of 1234yf+1122a+1243zf (2,3,3,3-tetrafluoropropene, +1-Chloro-1,2-Difluoroethylene+3,3,3-Trifluoropropene) - not more than 3ppm by weight of any individual unspecified/unknown chemical, - not more than 10ppm by weight of all unspecified/unknown chemicals combined, - not more than 10ppm by weight of Water, - with an acidity level of not more than 0.1ppm by weight, - without Halides, - not more than 0.01% by volume of High Boilers, - without any odour (no malodour) for further purification to an inhalation grade of HFC 134a produced under GMP (Good Manufacturing Practice) for use in the manufacture of a propellant for medical aerosols whose contents are taken into the oral or nasal cavities, and/or the respiratory tract (CAS RN 811-97-2)
Other
Pentafluoropropanes, hexafluoropropanes and heptafluoropropanes
1,1,1,3,3-Pentafluoropropane (CAS RN 460-73-1)
Other
Perfluorinated saturated fluorides
Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0)
Perfluoroethane (CAS RN 76-16-4)
Other
Other saturated fluorides
1H-Perfluorohexane (CAS RN 355-37-3)
Other
Unsaturated fluorides
2,3,3,3-tetrafluoropropene
1,3,3,3-tetrafluoropropene
Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene)|(CAS|RN|1645-83-6|)
Other
Other unsaturated fluorides
Perfluoro(4-methyl-2-pentene) (CAS RN 84650-68-0)
(Perfluorobutyl) ethylene (CAS RN 19430-93-4)
Hexafluoropropene (CAS RN 116-15-4)
Other
Iodides
Halogenated derivatives of acyclic hydrocarbons containing two or more different halogens
Chlorodifluoromethane
Dichlorotrifluoroethanes
Dichlorofluoroethanes
Chlorodifluoroethanes
2-Chloro-1,1-difluoroethane (CAS RN 338-65-8)
Other
Dichloropentafluoropropanes
Bromochlorodifluoromethane, bromotrifluoromethane and dibromotetrafluoroethanes
Bromochlorodifluoromethane
Bromotrifluoromethane
Dibromotetrafluoroethanes
Other, perhalogenated only with fluorine and chlorine
Trichlorofluoromethane, dichlorodifluoromethane, trichlorotrifluoroethanes, dichlorotetrafluoroethanes and chloropentafluoroethane
1,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5)
Other
Other
Chlorotrifluoroethylene (CAS RN 79-38-9)
Pentachlorofluoroethane
Tetrachlorodifluoroethanes
Heptachlorofluoropropanes
Hexachlorodifluoropropanes
Pentachlorotrifluoropropanes
Tetrachlorotetrafluoropropanes
Trichloropentafluoropropanes
Dichlorohexafluoropropanes
Chloroheptafluoropropanes
Chlorotrifluoromethane
Other
Other perhalogenated derivatives
Other
Halogenated only with bromine and chlorine, fluorine and chlorine or with fluorine and bromine
Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0)
Bromochloromethane (CAS RN 74-97-5)
Other
Other
Halogenated derivatives of cyclanic, cyclenic or cycloterpenic hydrocarbons
1,2,3,4,5,6-Hexachlorocyclohexane (HCH (ISO)), including lindane (ISO, INN)
Aldrin (ISO), chlordane (ISO) and heptachlor (ISO)
Other
1,2-Dibromo-4-(1,2-dibromoethyl)cyclohexane; tetrabromocyclooctanes
Other
1,6,7,8,9,14,15,16,17,17,18,18-Dodecachloropentacyclo[12.2.1.1$6$,$9.0$2$,$1$3.0$5$,$1$0]octadeca-7,15-diene, (CAS RN 13560-89-9)
Octafluorocyclopentene (CAS RN 559-40-0)
Hexabromocyclododecane
Chlorocyclopentane (CAS RN 930-28-9)
Other
Halogenated derivatives of aromatic hydrocarbons
Chlorobenzene, o-dichlorobenzene and p-dichlorobenzene
Hexachlorobenzene (ISO) and DDT (ISO) (clofenotane (INN), 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane)
Other
2,3,4,5,6-Pentabromoethylbenzene
Other
4-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)
1,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9)
1,3-Dichlorobenzene (CAS RN 541-73-1)
2,6-Dichlorotoluene, of a purity by weight of 99|% or more and containing: -|0,001|mg/kg or less of tetrachlorodibenzodioxines, -|0,001|mg/kg or less of tetrachlorodibenzofurans, -|0,2|mg/kg or less of tetrachlorobiphenyls
Fluorobenzene (CAS RN|462-06-6)
3-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS|RN|98-15-7)
1-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9)
2-Bromo-9H-fluorene|(CAS RN 1133-80-8)
Other
Sulphonated, nitrated or nitrosated derivatives of hydrocarbons, whether or not halogenated
Derivatives containing only sulpho groups, their salts and ethyl esters
Sodium p-styrenesulphonate (CAS RN 2695-37-6)
Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8)
Other
Derivatives containing only nitro or only nitroso groups
Nitromethane (CAS RN 75-52-5)
Nitroethane (CAS RN 79-24-3)
1-Nitropropane (CAS RN 108-03-2)
2-Nitropropane (CAS RN 79-46-9)
Other
Other
Trichloronitromethane (chloropicrin)
Trichloronitromethane, for the manufacture of goods of subheading 3808|92|(CAS RN 76-06-2)
Other
Other
1-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7)
Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)
Tosyl chloride (CAS RN 98-59-9)
1-Fluoro-4-nitrobenzene (CAS RN 350-46-9)
4-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)
Ethanesulphonyl chloride (CAS RN 594-44-5)
4,4'-Dinitrostilbene-2,2'-disulfonic acid (CAS|RN|128-42-7)
1-Chloro-4-nitrobenzene (CAS|RN|100-00-5)
1-Chloro-2-nitrobenzene (CAS|RN|88-73-3)
Other
II. ALCOHOLS AND THEIR HALOGENATED, SULPHONATED, NITRATED OR NITROSATED DERIVATIVES
Acyclic alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives
Saturated monohydric alcohols
Methanol (methyl alcohol)
Methanol (CAS|RN|67-56-1) with a purity of 99,85|% by weight or more
Other
Propan-1-ol (propyl alcohol) and propan-2-ol (isopropyl alcohol)
Butan-1-ol (n-butyl alcohol)
Other butanols
2-Methylpropan-2-ol (tert-butyl alcohol)
Other
Octanol (octyl alcohol) and isomers thereof
Octan-2-ol
Other
Single saturated fatty alcohols (also referred to as ‘single cuts’) with a carbon chain length of C8
Other
Dodecan-1-ol (lauryl alcohol), hexadecan-1-ol (cetyl alcohol) and octadecan-1-ol (stearyl alcohol)
Other
Metal alcoholates
Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29|of the CN
Other
Butyltitanate monohydrate, homopolymer (CAS RN162303-51-7)
Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6)
2,6-Dimethylheptan-4-ol (CAS RN 108-82-7)
2,6-Dimethylheptan-2-ol (CAS RN 13254-34-7)
Single saturated fatty alcohols (also referred to as ‘single cuts’) with a carbon chain length of C10 or C14
Titanium tetrabutanolate (CAS RN 5593-70-4)
Titanium tetraisopropoxide (CAS RN 546-68-9)
Titanium tetraethanolate (CAS RN 3087-36-3)
Other
Unsaturated monohydric alcohols
Acyclic terpene alcohols
Linalool (CAS RN 78-70-6) containing by weight 90,7|% or more of|(3R)-(-)-Linalool (CAS RN 126-91-0)
Other
Other
Allyl alcohol
Other
Diols
Ethylene glycol (ethanediol)
Propylene glycol (propane-1,2-diol)
Other
Butane-1,3-diol
Butane-1,4-diol
Butane-1,4-diol or tetramethylene glycol (1,4-butanediol) having a bio-based carbon content of 100|% by mass
Other
2,4,7,9-Tetramethyldec-5-yne-4,7-diol
Other
Propane-1,3-diol (CAS RN 504-63-2)
Butane-1,2-diol (CAS RN 584-03-2) (CAS RN 584-03-2)
2,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7)
Decane-1,10-diol|(CAS RN 112-47-0)
2-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2)
Other
Other polyhydric alcohols
2-Ethyl-2-(hydroxymethyl)propane-1,3-diol (trimethylolpropane)
Pentaerythritol
Mannitol
D-glucitol (sorbitol)
In aqueous solution
Containing 2|% or less by weight of D-mannitol, calculated on the D-glucitol content
Other
Other
Containing 2|% or less by weight of D-mannitol, calculated on the D-glucitol content
Other
Glycerol
Other
Ethylidynetrimethanol (CAS RN 77-85-0)
Other
Halogenated, sulphonated, nitrated or nitrosated derivatives of acyclic alcohols
Ethchlorvynol (INN)
Other
2,2-Bis(bromomethyl)propanediol
Other
2,2,2-Trifluoroethanol (CAS RN 75-89-8)
Other
Cyclic alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives
Cyclanic, cyclenic or cycloterpenic
Menthol
Cyclohexanol, methylcyclohexanols and dimethylcyclohexanols
Sterols and inositols
Sterols
Inositols
Other
Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8)
4,4'-Isopropylidenedicyclohexanol (CAS RN 80-04-6)
Cyclopropylmethanol (CAS RN 2516-33-8)
4-tert-Butylcyclohexanol (CAS RN 98-52-2)
Other
Aromatic
Benzyl alcohol
Other
1-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7)
2-Phenylethanol (CAS RN 60-12-8)
2-Bromo-5-iodo-benzenemethanol (CAS|RN|946525-30-0)
Other
III. PHENOLS, PHENOL-ALCOHOLS, AND THEIR HALOGENATED, SULPHONATED, NITRATED OR NITROSATED DERIVATIVES
Phenols; phenol-alcohols
Monophenols
Phenol (hydroxybenzene) and its salts
Cresols and their salts
O-Cresol having a purity of not less than 98,5% by weight (CAS RN 95-48-7)
Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity by weight of 99|% or more
p-Cresol (CAS RN 106-44-5)
Other
Octylphenol, nonylphenol and their isomers; salts thereof
Naphthols and their salts
1-Naphthol
Other
2-Naphthol|(CAS RN 135-19-3)
Other
Other
Xylenols and their salts
2,6-Xylenol (CAS|RN|576-26-1)
Other
Other
Biphenyl-4-ol (CAS RN 92-69-3)
Other
Polyphenols; phenol-alcohols
Resorcinol and its salts
Resorcinol (CAS RN 108-46-3)
Other
Hydroquinone (quinol) and its salts
Hydroquinone (quinol)
Other
4,4′-Isopropylidenediphenol (bisphenol|A, diphenylolpropane) and its salts
Other
6,6'-Di-tert-butyl-4,4'-butylidenedi-m-cresol (CAS RN 85-60-9)
4,4'-(3,3,5-Trimethylcyclohexylidene)diphenol|(CAS RN 129188-99-4)
4-Hydroxybenzyl alcohol (CAS|RN|623-05-2)
4,4',4''-Ethylidynetriphenol (CAS RN 27955-94-8)
4-[2-(4-Hydroxy-3-prop-2-enylphenyl)propan-2-yl]-2-prop-2-enylphenol,|(CAS RN 1745-89-7)
2,3,5-Trimethylhydroquinone (CAS RN 700-13-0)
2-Methylhydroquinone (CAS RN 95-71-6)
6,6',6"-Tricyclohexyl-4,4',4"-butane-1,1,3-triyltri(m-cresol)|(CAS RN|111850-25-0)
Biphenyl-2,2'-diol (CAS RN 1806-29-7)
2,2'-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8)
2,2′,2″,6,6′,6″-Hexa-_tert_-butyl-_α,α′,α″_-(mesitylene-2,4,6-triyl)tri- _p_-cresol (CAS RN 1709-70-2)
Phloroglucinol whether or not hydrated
Other
Halogenated, sulphonated, nitrated or nitrosated derivatives of phenols or phenol-alcohols
Derivatives containing only halogen substituents and their salts
Pentachlorophenol (ISO)
Other
Pentafluorophenol (CAS RN 771-61-9)
4,4'-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1)
4-Chlorophenol (CAS|RN|106-48-9)
3,4,5-Trifluorophenol (CAS RN 99627-05-1)
4-Fluorophenol (CAS|RN|371-41-5)
Other
Other
Dinoseb (ISO) and its salts
4,6-Dinitro-o-cresol (DNOC (ISO)) and its salts
Other
4-Nitrophenol (CAS RN 100-02-7)
4,5-Dihydroxynaphthalene-2,7-disulphonic acid (CAS RN 148-25-4)
Other
IV. ETHERS, ALCOHOL PEROXIDES, ETHER PEROXIDES, KETONE PEROXIDES, EPOXIDES WITH A THREE-MEMBERED RING, ACETALS AND HEMIACETALS, AND THEIR HALOGENATED, SULPHONATED, NITRATED OR NITROSATED DERIVATIVES
Ethers, ether-alcohols, ether-phenols, ether-alcohol-phenols, alcohol peroxides, ether peroxides, ketone peroxides (whether or not chemically defined), and their halogenated, sulphonated, nitrated or nitrosated derivatives
Acyclic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives
Diethyl ether
Other
Tert-butyl ethyl ether (ethyl-tertio-butyl-ether, ETBE)
Other
Bis(2-chloroethyl) ether|(CAS RN 111-44-4)
Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99|% or more
3-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9)
1-Methoxyheptafluoropropane (CAS RN 375-03-1)
Other
Cyclanic, cyclenic or cycloterpenic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives
8-Methoxycedrane (CAS RN 19870-74-7)
Other
Aromatic ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives
Diphenyl ether
Derivatives halogenated only with bromine
Pentabromodiphenyl ether; 1,2,4,5-tetrabromo-3,6-bis(pentabromophenoxy)benzene
1,2-Bis(2,4,6-tribromophenoxy)ethane, for the manufacture of acrylonitrile-butadiene-styrene (ABS)
Other
Bis(pentabromophenyl) ether|(CAS RN 1163-19-5)
1,1'-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene], (CAS RN 21850-44-2)
1,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)
Other
Other
2-(Phenylmethoxy)naphthalene (CAS RN 613-62-7)
1,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1)
3,4,5-Trimethoxytoluene (CAS RN 6443-69-2)
1-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)
1-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)
1-Butoxy-2,3-difluorobenzene (CAS|RN|136239-66-2)
Other
Ether-alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives
2,2′-Oxydiethanol (diethylene glycol, digol)
Monobutyl ethers of ethylene glycol or of diethylene glycol
Other monoalkylethers of ethylene glycol or of diethylene glycol
Other
2-(2-Chloroethoxy)ethanol
Other
1-Propoxypropan-2-ol (CAS RN 1569-01-3)
Other
Ether-phenols, ether-alcohol-phenols and their halogenated, sulphonated, nitrated or nitrosated derivatives
4-(2-Methoxyethyl)phenol (CAS RN 56718-71-9)
Ubiquinol (CAS RN 992-78-9)
2-tert-Butyl-4-hydroxyanisole and 3-tert-butyl-4-hydroxyanisole, mixed isomers (CAS|RN|25013-16-5)
Other
Alcohol peroxides, ether peroxides, ketone peroxides and their halogenated, sulphonated, nitrated or nitrosated derivatives
Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3)
1,4-Di(2-tert-butylperoxyisopropyl)benzene (CAS RN 25155-25-3)
3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons
Other
Epoxides, epoxyalcohols, epoxyphenols and epoxyethers, with a three-membered ring, and their halogenated, sulphonated, nitrated or nitrosated derivatives
Oxirane (ethylene oxide)
Methyloxirane (propylene oxide)
1-Chloro-2,3-epoxypropane (epichlorohydrin)
Dieldrin (ISO, INN)
Other
1,2-Epoxycyclohexane (CAS RN 286-20-4)
2-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4)
2,3-Epoxypropan-1-ol (glycidol)|(CAS RN 556-52-5)
2,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)
Allyl glycidyl ether (CAS RN 106-92-3)
Other
Acetals and hemiacetals, whether or not with other oxygen function, and their halogenated, sulphonated, nitrated or nitrosated derivatives
Ethoxy-2,2-difluoroethanol (CAS RN 148992-43-2)
Other
V. ALDEHYDE-FUNCTION COMPOUNDS
Aldehydes, whether or not with other oxygen function; cyclic polymers of aldehydes; paraformaldehyde
Acyclic aldehydes without other oxygen function
Methanal (formaldehyde)
Ethanal (acetaldehyde)
Other
Cyclic aldehydes without other oxygen function
Benzaldehyde
Other
(2E,4E,6E,8E,10E,12E)-2,7,11-Trimethyl-13-(2,6,6-trimethyl-1-cyclohexen-1-yl)-2,4,6,8,10,12-tridecahexaenal,|(CAS RN 1638-05-7)
4-Isobutylbenzaldehyde (CAS RN 40150-98-9)
3,4-Dimethylbenzaldehyde (CAS RN 5973-71-7)
4-tert-Butylbenzaldehyde (CAS RN 939-97-9)
4-Isopropylbenzaldehyde (CAS RN 122-03-2)
Other
Aldehyde-alcohols, aldehyde-ethers, aldehyde-phenols and aldehydes with other oxygen function
Vanillin (4-hydroxy-3-methoxybenzaldehyde)
Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde)
Other
3-Phenoxybenzaldehyde (CAS RN 39515-51-0)
4-Hydroxybenzaldehyde (CAS RN 123-08-0)
Salicylaldehyde (CAS RN 90-02-8)
3-Hydroxy-p-anisaldehyde (CAS|RN|621-59-0)
Other
Cyclic polymers of aldehydes
Paraformaldehyde
Halogenated, sulphonated, nitrated or nitrosated derivatives of products of heading|2912
VI. KETONE-FUNCTION COMPOUNDS AND QUINONE-FUNCTION COMPOUNDS
Ketones and quinones, whether or not with other oxygen function, and their halogenated, sulphonated, nitrated or nitrosated derivatives
Acyclic ketones without other oxygen function
Acetone
Butanone (methyl ethyl ketone)
4-Methylpentan-2-one (methyl isobutyl ketone)
Other
5-Methylhexan-2-one
Other
Heptan-2-one (CAS RN 110-43-0)
3-Methylbutanone (CAS RN 563-80-4)
Pentan-2-one (CAS RN 107-87-9)
Calcium acetylacetonate (CAS RN 19372-44-2) for use in the manufacture of stabilisator systems in tablet form
Other
Cyclanic, cyclenic or cycloterpenic ketones without other oxygen function
Cyclohexanone and methylcyclohexanones
Ionones and methylionones
Other
Cyclohexadec-8-enone (CAS RN 3100-36-5)
(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)
Camphor
trans-β-Damascone (CAS RN 23726-91-2)
Cyclopropyl methyl ketone (CAS RN 765-43-5)
Other
Aromatic ketones without other oxygen function
Phenylacetone (phenylpropan-2-one)
Other
2,6-Dimethyl-1-indanone (CAS RN 66309-83-9)
1,3-Diphenylpropane-1,3-dione| (CAS RN 120-46-7)
Benzophenone (CAS RN 119-61-9)
4-Phenylbenzophenone (CAS RN 2128-93-0)
4-Methylbenzophenone (CAS RN 134-84-9)
Benzil (CAS RN 134-81-6)
4'-Methylacetophenone (CAS RN 122-00-9)
Other
Ketone-alcohols and ketone-aldehydes
4-Hydroxy-4-methylpentan-2-one (diacetone alcohol)
Other
Ketone-phenols and ketones with other oxygen function
3'-Hydroxyacetophenone (CAS RN 121-71-1)
4'-Methoxyacetophenone (CAS RN 100-06-1)
2´-Hydroxyacetophenone|(CAS RN 118-93-4)
2,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5)
4-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)
3,4-Dihydroxybenzophenone (CAS RN 10425-11-3)
2,2',4,4'-Tetrahydroxybenzophenone|(CAS|RN|131-55-5)
2,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)
3-Methoxyacetophenone (CAS|RN|586-37-8)
16α,17α-Epoxy-3β-hydroxypregn-5-en-20-one (CAS RN|974-23-2)
7-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS|RN|22009-38-7)
2',6'-Dihydroxyacetophenone (CAS RN 699-83-2)
Other
Quinones
Anthraquinone
Other
1,4-Naphthoquinone
Other
2-Ethylanthraquinone (CAS RN 84-51-5)
2-Pentylanthraquinone (CAS RN 13936-21-5)
1,4-Dihydroxyanthraquinone (CAS RN 81-64-1)
p-Benzoquinone (CAS RN 106-51-4)
Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8)
Other
Halogenated, sulphonated, nitrated or nitrosated derivatives
1-(4-Methylphenyl)-4,4,4-trifluorobutane-1,3-dione (CAS RN 720-94-5)
2,4'-Difluorobenzophenone (CAS RN 342-25-6)
1-(7-Bromo-9,9-difluoro-9H-fluoren-2-yl)-2-chloroethanone (CAS|RN|1378387-81-5)
Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8)
1-(1-Chlorocyclopropyl)ethanone (CAS RN 63141-09-3)
3’-Chloropropiophenone (CAS RN 34841-35-5)
2-Chloro-1-(1-chlorocyclopropyl)ethanone (CAS RN 120983-72-4)
4'-tert-Butyl-2',6'-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1)
4-Chloro-4'-hydroxybenzophenone|(CAS RN 42019-78-3)
Tetrachloro-p-benzoquinone (CAS RN 118-75-2)
Other
VII. CARBOXYLIC ACIDS AND THEIR ANHYDRIDES, HALIDES, PEROXIDES AND PEROXYACIDS AND THEIR HALOGENATED, SULPHONATED, NITRATED OR NITROSATED DERIVATIVES
Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives
Formic acid, its salts and esters
Formic acid
Salts of formic acid
Esters of formic acid
Esters of mannitol or sorbitol
Other
Acetic acid and its salts; acetic anhydride
Acetic acid
of a purity by weight of 99% or more (CAS RN 64-19-7)
Other
Acetic anhydride
Other
Antimony triacetate (CAS RN 6923-52-0)
Other
Esters of acetic acid
Ethyl acetate
Vinyl acetate
n-Butyl acetate
Dinoseb (ISO) acetate
Other
2-Methylcyclohexyl acetate (CAS RN 5726-19-2)
_tert_-Butyl acetate (CAS RN 540-88-5)
3-Acetylphenyl acetate (CAS RN 2454-35-5)
Dodec-8-enyl acetate (CAS RN 28079-04-1)
Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)
Dodec-9-enyl acetate (CAS RN 16974-11-1)
Isobornyl acetate (CAS RN 125-12-2)
1-Phenylethyl acetate (CAS RN 93-92-5)
2-tert-Butylcyclohexyl acetate (CAS RN 88-41-5)
Other
Mono-, di- or trichloroacetic acids, their salts and esters
Propionic acid, its salts and esters
Butanoic acids, pentanoic acids, their salts and esters
Butanoic acids and their salts and esters
1-Isopropyl-2,2-dimethyltrimethylene diisobutyrate
Other
Ethyl butyrate (CAS RN 105-54-4)
Other
Pentanoic acids and their salts and esters
Palmitic acid, stearic acid, their salts and esters
Palmitic acid and its salts and esters
Stearic acid and its salts and esters
Other
Lauric acid and its salts and esters
Other
3,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)
Trimethyl orthoformate (CAS RN 149-73-5)
Allyl heptanoate (CAS RN 142-19-8)
Triethyl orthoformate (CAS RN 122-51-0)
Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)
2-Ethyl-2-methyl butanoic acid (CAS RN 19889-37-3)
Cobalt borate neodecanoate complexes, with a purity by weight of 92% or more, (CAS RN 68457-13-6)
2,2-Dimethylbutyryl chloride (CAS RN 5856-77-9)
Ethyl difluoroacetate (CAS RN 454-31-9)
Other
Unsaturated acyclic monocarboxylic acids, cyclic monocarboxylic acids, their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives
Unsaturated acyclic monocarboxylic acids, their anhydrides, halides, peroxides, peroxyacids and their derivatives
Acrylic acid and its salts
Acrylic acid
Salts of acrylic acid
Esters of acrylic acid
2-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate|(CAS RN 61167-58-6)
2,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2)
2-(2-Vinyloxyethoxy)ethyl acrylate (CAS RN 86273-46-3)
Other
Methacrylic acid and its salts
Hydroxyzinc methacrylate powder (CAS RN 63451-47-8)
Zinc dimethacrylate, in the form of powder (CAS RN 13189-00-9)
Other
Esters of methacrylic acid
2,3-Epoxypropyl methacrylate (CAS RN 106-91-2)
Ethyl methacrylate (CAS RN 97-63-2)
Allyl methacrylate (CAS RN 96-05-9) and its' isomers with a purity by weight of 98|% or more and containing at least: -|0,01|% or more but not more than 0,02|% of Allyl alcohol (CAS RN 107-18-6), -|0,01|% or more but not more than 0,1|% of Methacrylic acid (CAS RN 79-41-4), and -|0,5|% or more but not more than 1|% of 4-Methoxyphenol (CAS RN 150-76-5)
Other
Oleic, linoleic or linolenic acids, their salts and esters
Binapacryl (ISO)
Other
Undecenoic acids and their salts and esters
Crotonic acid
Other
Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1)
Potassium (E,E)-hexa-2,4-dienoate|(CAS RN 24634-61-5)
Sorbic acid|for use in the manufacture of animal feeds (CAS RN 110-44-1)
Methyl 2-fluoroacrylate (CAS|RN 2343-89-7)
Other
Cyclanic, cyclenic or cycloterpenic monocarboxylic acids, their anhydrides, halides, peroxides, peroxyacids and their derivatives
Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6)
3-Cyclohexylpropionic acid (CAS RN 701-97-3)
Other
Aromatic monocarboxylic acids, their anhydrides, halides, peroxides, peroxyacids and their derivatives
Benzoic acid, its salts and esters
Benzyl benzoate (CAS RN|120-51-4)
Other
Benzoyl peroxide and benzoyl chloride
Phenylacetic acid and its salts
Other
Esters of phenylacetic acid
Other
2,3,4,5-Tetrafluorobenzoic acid (CAS RN 1201-31-6)
3,5-Dinitrobenzoic acid (CAS|RN|99-34-3)
2-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3)
2,4-Dichlorophenylacetic acid (CAS RN|19719-28-9)
3,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)
(2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6)
2-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8)
2,5-dimethylphenylacetyl chloride (CAS RN 55312-97-5)
2,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)
Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9)
6-Bromonaphthalene-2-carboxylic acid (CAS RN 5773-80-8)
4-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)
2-Chlorobenzoic acid (CAS RN 118-91-2)
3-Fluorobenzoyl chloride (CAS RN 1711-07-5)
3,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1)
3-Chloro-2-fluorobenzoic acid (CAS|RN|161957-55-7)
5-Iodo-2-methylbenzoic acid (CAS|RN|54811-38-0)
4-tert-Butylbenzoic acid (CAS RN 98-73-7|)
4-Ethylbenzoyl chloride (CAS RN 16331-45-6)
2-Phenylbutyric Acid (CAS RN 90-27-7)
Ibuprofen (INN) (CAS RN 15687-27-1)
m-Toluic acid (CAS|RN|99-04-7)
(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)
Other
Polycarboxylic acids, their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives
Acyclic polycarboxylic acids, their anhydrides, halides, peroxides, peroxyacids and their derivatives
Oxalic acid, its salts and esters
Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1)
Cobalt oxalate (CAS RN 814-89-1)
Other
Oxalic acid, whether in dihydrate (CUS number 0028635-1 and CAS number 6153-56-6) or anhydrous form (CUS number 0021238-4 and CAS number 144-62-7) and whether or not in aqueous solution
Other
Adipic acid, its salts and esters
Adipic acid and its salts
Esters of adipic acid
Azelaic acid, sebacic acid, their salts and esters
Sebacic acid
Other
Dimethyl sebacate (CAS RN 106-79-6)
Other
Maleic anhydride
Other
Malonic acid, its salts and esters
Dimethyl malonate (CAS RN 108-59-8)
Diethyl malonate (CAS RN 105-53-3)
Other
Ethane-1,2-dicarboxylic acid or butanedioic acid (succinic acid) having a bio-based carbon content of 100|% by mass
Other
Dimethyl but-2-ynedioate (CAS RN 762-42-5)
Sodium 1,2-bis(cyclohexyloxycarbonyl)ethanesulphonate|(CAS RN 23386-52-9)
n-Dodecelylsuccinic acid anhydride (CAS RN 19780-11-1) with: - a Gardner colour index level of not more than 1, - a transmission at 500 nm of 98% or more for a 10% solution by weight in toluene, for use in the manufacture of automotive coatings
Ethylene brassylate (CAS RN 105-95-3)
Dodecanedioic acid, of a purity by weight of more than 98,5|% (CAS RN 693-23-2)
Tetradecanedioic acid (CAS RN 821-38-5)
Itaconic acid (CAS RN 97-65-4)
Other
Cyclanic, cyclenic or cycloterpenic polycarboxylic acids, their anhydrides, halides, peroxides, peroxyacids and their derivatives
1,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5)
3-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6)
Other
Aromatic polycarboxylic acids, their anhydrides, halides, peroxides, peroxyacids and their derivatives
Dioctyl orthophthalates
Dinonyl or didecyl orthophthalates
Other esters of orthophthalic acid
Diallyl phthalate (CAS RN 131-17-9)
Other
Phthalic anhydride
Terephthalic acid and its salts
Of a purity by weight of 99,5 % or more
Other
Dimethyl terephthalate
Other
Ester or anhydride of tetrabromophthalic acid; benzene-1,2,4-tricarboxylic acid; isophthaloyl dichloride, containing by weight 0,8|% or less of terephthaloyl dichloride; naphthalene-1,4,5,8-tetracarboxylic acid; tetrachlorophthalic anhydride; sodium 3,5-bis(methoxycarbonyl)benzenesulphonate
Other
Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)
Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)
Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)
1-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)
Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5)
1,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4)
Perylene-3,4:9,10-tetracarboxylic dianhydride(CAS|RN|128-69-8)
1,2,4-Benzenetricarboxylic acid, 1,2,4-trioctyl ester (CAS RN 89-04-3) with a purity by weight of more than 96|%
Other
Carboxylic acids with additional oxygen function and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivatives
Carboxylic acids with alcohol function but without other oxygen function, their anhydrides, halides, peroxides, peroxyacids and their derivatives
Lactic acid, its salts and esters
Tartaric acid
D-(-)-tartaric acid with a negative optical rotation of at least 12.0|degrees, measured in a water solution according to the method described in the European Pharmacopoeia
Other
Salts and esters of tartaric acid
Citric acid
Consigned from Malaysia
Other
Salts and esters of citric acid
Trisodium citrate dihydrate
Consigned from Malaysia
Other
Other
Gluconic acid, its salts and esters
Dry sodium gluconate with a Customs Union and Statistics (CUS) number 0023277-9 and a Chemical Abstracts Service (CAS) registry number 527-07-1
Calcium digluconate monohydrate (CAS RN 66905-23-5) for use in the manufacture of calcium gluconate lactate (CAS RN 11116-97-5)
Other
Chlorobenzilate (ISO)
Other
Cholic acid, 3-α,12-α-dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid), their salts and esters
Cholic Acid (CAS|RN|81-25-4)
3-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS|RN|83-44-3)
Other
2,2-Bis(hydroxymethyl)propionic acid
2,2-Diphenyl-2-hydroxyacetic acid (benzilic acid)
Other
L-Malic acid (CAS RN 97-67-6)
Other
Carboxylic acids with phenol function but without other oxygen function, their anhydrides, halides, peroxides, peroxyacids and their derivatives
Salicylic acid and its salts
o-Acetylsalicylic acid, its salts and esters
o-Acetylsalicylic acid (CAS RN 50-78-2)
Other
Other esters of salicylic acid and their salts
Other
Sulphosalicylic acids, hydroxynaphthoic acids; their salts and esters
Monohydroxynaphthoic acids
Other
Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)
Hexamethylene bis[3-(3,5-di-_tert_-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2)
Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with - a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight and - a melting point of 110 °C or more, but not more than 125 °C, for use in the manufacture of PVC-processing stabilizer-one packs based on powder mixtures
Methyl-, ethyl-,|propyl-|or butyl|esters of 4-hydroxybenzoic acid or their sodium salts,|(CAS RN 35285-68-8,|99-76-3,|5026-62-0,|94-26-8,|94-13-3,|35285-69-9,|120-47-8, 36457-20-2|or 4247-02-3)
Pentaerythritol tetrakis (3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8): - with a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and - a melting point of 49 °C or more, but not more than 54 °C, for use in the manufacture of PVC-processing stabilizer-one packs based on powder mixtures
3,5-Diiodosalicylic acid| (CAS RN 133-91-5)
Other
Carboxylic acids with aldehyde or ketone function but without other oxygen function, their anhydrides, halides, peroxides, peroxyacids and their derivatives
Benzophenone-3,3′:4,4′-tetracarboxylic dianhydride (CAS RN 2421-28-5)
Methyl-2-benzoylbenzoate (CAS RN 606-28-0)
Ethyl acetoacetate (CAS RN 141-97-9)
4-Oxovaleric acid (CAS|RN|123-76-2)
2-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1)
Other
Other
2,4,5-T (ISO) (2,4,5-trichlorophenoxyacetic acid), its salts and esters
Other
2,6-Dimethoxybenzoic acid; dicamba (ISO); sodium phenoxyacetate
Other
3,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0)
3-Methoxy-2-methylbenzoyl chloride (CAS|RN|24487-91-0)
Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)
Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)
Methyl 3-methoxyacrylate (CAS RN 5788-17-0)
Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS|RN|117428-51-0)
Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2)
p-Anisic acid (CAS|RN|100-09-4)
trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6)
4-Methylcatechol dimethyl acetate (CAS|RN|52589-39-6)
Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0)
Stearyl glycyrrhetinate(CAS RN 13832-70-7)
3,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2)
Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt|(CAS RN 908020-52-0)
Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8)
3,4-Dimethoxybenzoic acid (CAS|RN|93-07-2)
Sodium 5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoate, (CAS RN 62476-59-9)
Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96|% or more
Other
VIII. ESTERS OF INORGANIC ACIDS OF NON-METALS AND THEIR SALTS, AND THEIR HALOGENATED, SULPHONATED, NITRATED OR NITROSATED DERIVATIVES
Phosphoric esters and their salts, including lactophosphates; their halogenated, sulphonated, nitrated or nitrosated derivatives
Tris(2,3-dibromopropyl) phosphate
Other
2,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2)
Aluminium hydroxybis[2,2′-methylenebis(4,6-di-_tert_-butylphenyl)phosphate] (CAS RN 151841-65-5)
Tri-n-hexylphosphate (CAS RN 2528-39-4)
Triethyl phosphate (CAS RN 78-40-0)
Bisphenol-A bis(diphenyl phosphate) (CAS|RN|5945-33-5)
Tris(2-butoxyethyl)phosphate (CAS|RN|78-51-3)
Other
Esters of other inorganic acids of non-metals (excluding esters of hydrogen halides) and their salts; their halogenated, sulphonated, nitrated or nitrosated derivatives
Thiophosphoric esters (phosphorothioates) and their salts; their halogenated, sulphonated, nitrated or nitrosated derivatives
Parathion (ISO) and parathion-methyl (ISO) (methyl-parathion)
Other
Fenitrothion (ISO) (CAS RN 122-14-5)
Tolclofos-methyl (ISO) (CAS RN 57018-04-9)
2,2'-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2'-disulphide (CAS|RN|4090-51-1)
Other
Other
Sulphuric esters and carbonic esters and their salts, and their halogenated, sulphonated, nitrated or nitrosated derivatives
Diethyl sulphate|(CAS RN 64-67-5)
Diallyl 2,2'-oxydiethyl dicarbonate (CAS RN 142-22-3)
Dimethyl carbonate (CAS RN 616-38-6)
Di-tert-butyl dicarbonate (CAS RN 24424-99-5)
2,4-Di-tert-butyl-5-nitrophenyl methyl carbonate (CAS RN|873055-55-1)
Dimethyl Sulphate (CAS RN 77-78-1)
Other
Dimethyl phosphonate (dimethyl phosphite)
Trimethyl phosphite (trimethoxyphosphine)
Triethyl phosphite
Diethyl phosphonate (diethyl hydrogenphosphite) (diethyl phosphite)
Other
O,O'-Dioctadecyl pentaerythritol bis(phosphite)|(CAS RN 3806-34-6)
Tris(methylphenyl)phosphite (CAS RN 25586-42-9)
2,2'-[[3,3',5,5'-Tetrakis(1,1-dimethylethyl)[1,1'-biphenyl]-2,2'-diyl]bis(oxy)]bis[biphenyl-1,3,2-dioxaphosphepine] (CAS RN 138776-88-2)
Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)
Fosetyl-aluminium (CAS RN 39148-24-8)
Bis(neopentylglycolato)diboron (CAS RN 201733-56-4)
Tris (2,4-di-tert-butylphenyl)phosphite (CAS RN 31570-04-4)
Bis(pinacolato)diboron (CAS|RN|73183-34-3)
Other
IX. NITROGEN-FUNCTION COMPOUNDS
Amine-function compounds
Acyclic monoamines and their derivatives; salts thereof
Methylamine, di- or trimethylamine and their salts
Other
1,1,3,3-Tetramethylbutylamine
Diethylamine and its salts
Diethylamino-triethoxysilane (CAS RN 35077-00-0)
Other
2-(N,N-Diethylamino)ethyl chloride hydrochloride, 2-(N,N-diisopropylamino)ethyl chloride hydrochloride, and 2-(N,N-dimethylamino)ethyl chloride hydrochloride
2-(N,N-Diethylamino)ethyl chloride hydrochloride (CAS RN 869-24-9)
Other
Other
Ethyl(2-methylallyl)amine (CAS RN 18328-90-0)
Allylamine (CAS RN 107-11-9)
Tetrakis(ethylmethylamino) zirconium (IV), (CAS RN|175923-04-3)
N,N-Dimethyloctylamine - boron trichloride (1:1) (CAS|RN|34762-90-8)
Taurine (CAS RN 107-35-7), with 0.5|% addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)
Other
Acyclic polyamines and their derivatives; salts thereof
Ethylenediamine and its salts
Hexamethylenediamine and its salts
Other
Tris[3-(dimethylamino)propyl]amine|(CAS RN 33329-35-0)
Bis[3-(dimethylamino)propyl]methylamine|(CAS RN 3855-32-1)
Decamethylenediamine (CAS RN 646-25-3)
N'-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine, (CAS RN 6711-48-4)
Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5)
Other
Cyclanic, cyclenic or cycloterpenic mono- or polyamines, and their derivatives; salts thereof
Cyclohexylamine and cyclohexyldimethylamine, and their salts
Cyclohex-1,3-ylenediamine (1,3-diaminocyclohexane)
Other
1,3-Cyclohexanedimethanamine (CAS RN 2579-20-6)
Cyclopropylamin (CAS RN 765-30-0)
Other
Aromatic monoamines and their derivatives; salts thereof
Aniline and its salts
Aniline with a purity by weight of 99% or more (CAS RN 62-53-3)
Other
Aniline derivatives and their salts
4-Amino-3-nitrobenzenesulphonic acid (CAS RN 616-84-2)
3-Chloroaniline (CAS RN 108-42-9)
Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5)
4-Nitroaniline (CAS RN 100-01-6)
2-Fluoroaniline (CAS|RN|348-54-9)
2-Nitroaniline (CAS RN 88-74-4)
Sodium sulphanilate (CAS RN 515-74-2), also in form of its mono- or dihydrates (CAS RN 12333-70-0|or 6106-22-5)
2,4,5-Trichloroaniline (CAS RN 636-30-6)
3-Aminobenzenesulfonic acid (CAS RN 121-47-1)
Sulphanilic acid
2-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2)
4-Chloro-2-nitroaniline (CAS RN 89-63-4)
2-Chloro-4-nitroaniline (CAS RN 121-87-9)
3,5-Dichloroaniline (CAS RN 626-43-7)
2,5-Dichloroaniline|(CAS RN 95-82-9)
N-Methylaniline (CAS RN 100-61-8)
3,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)
Other
Toluidines and their derivatives; salts thereof
4-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7)
3-Nitro-p-toluidine (CAS RN 119-32-4)
4-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8)
4-Aminobenzotrifluoride (CAS RN 455-14-1)
3-Aminobenzotrifluoride (CAS RN 98-16-8)
N-Ethyl-m-toluidine|(CAS RN 102-27-2)
6-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6)
Other
Diphenylamine and its derivatives; salts thereof
Diphenylamine (CAS RN 122-39-4)
Other
1-Naphthylamine (α-naphthylamine), 2-naphthylamine (β-naphthylamine) and their derivatives; salts thereof
2-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6)
7-Aminonaphthalene-1,3,6-trisulphonic acid| (CAS RN 118-03-6)
Other
Amfetamine (INN), benzfetamine (INN), dexamfetamine (INN), etilamfetamine (INN), fencamfamin (INN), lefetamine (INN), levamfetamine (INN), mefenorex (INN) and phentermine (INN); salts thereof
Other
Pendimethalin (ISO) (CAS RN 40487-42-1)
N-1-Naphthylaniline (CAS RN 90-30-2)
3,4-Xylidine (CAS RN 95-64-7)
2,6-Diisopropylaniline (CAS RN 24544-04-5)
4-Heptafluoroisopropyl-2-methylaniline (CAS RN 238098-26-5)
4-Isopropylaniline (CAS RN 99-88-7)
Other
Aromatic polyamines and their derivatives; salts thereof
o-, m-, p-Phenylenediamine, diaminotoluenes, and their derivatives; salts thereof
o-, m-, p-Phenylenediamine, diaminotoluenes and their halogenated, sulphonated, nitrated and nitrosated derivatives; salts thereof
m-Phenylenediamine, of a purity by weight of 99|% or more and containing:-|1|% or less by weight of water,-|200|mg/kg or less of o-phenylenediamine and-|450|mg/kg or less of p-phenylenediamine
Other
o-Phenylenediamine (CAS RN 95-54-5)
Toluene diamine (TDA), containing by weight: -|72|% or more but not more than 82|% of 4-methyl-m-phenylenediamine, and -|17|% or more but not more than 22|% of 2-methyl-m-phenylenediamine, and -|not more than 0,23|% of residual tar whether or not containing 7|% or less of water
2-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9)
p-Phenylenediamine (CAS RN 106-50-3)
Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene
2,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1)
4-Bromo- 1,2-diaminobenzene|(CAS|RN|1575-37-7)
Other
Other
Other
m-Phenylenebis(methylamine); 2,2′-dichloro-4,4′-methylenedianiline; 4,4′-bi-o-toluidine; 1,8-naphthylenediamine
Other
Mixture of isomers of 3,5-diethyltoluenediamine
3,3'-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)
4,4'-Diaminostilbene-2,2'-disulphonic acid (CAS RN 81-11-8)
(2R,5R)-1,6-Diphenylhexane-2,5-diamine dihydrochloride (CAS RN 1247119-31-8)
Tris(4-aminophenyl)methane (CAS|RN|548-61-8)
Other
Oxygen-function amino-compounds
Amino-alcohols, other than those containing more than one kind of oxygen function, their ethers and esters; salts thereof
Monoethanolamine and its salts
Diethanolamine and its salts
Triethanolamine and its salts
Triethanolamine
Salts of triethanolamine
Dextropropoxyphene (INN) and its salts
Other
N-Ethyldiethanolamine
2,2′-Methyliminodiethanol (N-methyldiethanolamine)
2-(N,N-Diisopropylamino)ethanol
Other
2-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)
Titanium bis(triethanolamine)diisopropoxide (CAS RN 36673-16-2)
N,N,N',N'-Tetramethyl-2,2'-oxybis(ethylamine) (CAS RN 3033-62-3)
2-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)
2-[2-Hydroxyethyl(octadecyl)amino]ethanol|(CAS RN 10213-78-2)
2-(2-Methoxyphenoxy)ethylamine (CAS RN 1836-62-0)
N,N,N'-trimethyl-N'-(2-hydroxy-ethyl) 2,2'-oxybis(ethylamine), (CAS RN 83016-70-0)
trans-4-Aminocyclohexanol|(CAS RN 27489-62-9)
D-(-)-threo-2-amino-1-(p-nitrophenyl)propane-1,3-diol (CAS RN 716-61-0)
2-Ethoxyethylamine (CAS RN 110-76-9)
N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine (CAS RN 189253-72-3)
(1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0)
Other
Amino-naphthols and other amino-phenols, other than those containing more than one kind of oxygen function, their ethers and esters; salts thereof
Aminohydroxynaphthalenesulphonic acids and their salts
2-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2)
6-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7)
7-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5)
Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3)
4-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80|% or more (CAS RN 90-20-0)
Other
Other
3-Aminophenol (CAS RN 591-27-5)
5-Amino-o-cresol (CAS RN 2835-95-2)
1,2-Bis(2-aminophenoxy)ethane (CAS|RN|52411-34-4)
4-Hydroxy-6-[(3-sulphophenyl)amino]naphthalene-2-sulphonic acid (CAS|RN|25251-42-7)
Anisidines
Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97|% or more
4-Trifluoromethoxyaniline (CAS RN 461-82-5)
4-Nitro-o-anisidine (CAS RN 97-52-9)
4-(2-Aminoethyl)phenol (CAS RN 51-67-2)
3-Diethylaminophenol (CAS RN 91-68-9)
4-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6)
Other
Amino-aldehydes, amino-ketones and amino-quinones, other than those containing more than one kind of oxygen function; salts thereof
Amfepramone (INN), methadone (INN) and normethadone (INN); salts thereof
Other
1-Amino-4-bromo-9,10-dioxoanthracene-2-sulfonic acid and its salts
2-Amino-5-chlorobenzophenone (CAS RN 719-59-5)
3-(Dimethylamino)-1-(1-naphthalenyl)-1-propanone)hydrochloride (CAS RN 5409-58-5)
5-Chloro-2-(methylamino)benzophenone (CAS|RN|1022-13-5)
p-[(2-Chloroethyl)ethylamino]benzaldehyde (CAS RN 2643-07-4)
Other
Amino-acids, other than those containing more than one kind of oxygen function, and their esters; salts thereof
Lysine and its esters; salts thereof
Glutamic acid and its salts
Monosodium glutamate
Other
Anthranilic acid and its salts
Anthranilic acid (CAS RN 118-92-3)
Other
Tilidine (INN) and its salts
Other
ß-Alanine
Other
Ornithine aspartate (INNM), (CAS RN 3230-94-2)
DL-Aspartic acid used for the manufacture of|food-integrators (CAS RN 617-45-8)
3-Amino-4-chlorobenzoic acid|(CAS|RN 2840-28-0)
Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372-81-6)
Aqueous solution containing 40|% by weight or more of sodium methylaminoacetate (CAS RN 4316-73-8)
Norvaline
Glycine (CAS RN 56-40-6)
D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9)
(E)-Ethyl 4-(dimethylamino)but-2-enoate maleate|(CUS|0138070-7)
Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)
Diethyl aminomalonate hydrochloride|(CAS RN 13433-00-6)
2-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3)
12-Aminododecanoic acid (CAS|RN|693-57-2)
Other
Amino-alcohol-phenols, amino-acid-phenols and other amino-compounds with oxygen function
1-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9)
2-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate
Other
Quaternary ammonium salts and hydroxides; lecithins and other phosphoaminolipids, whether or not chemically defined
Choline and its salts
Calcium phosphoryl choline chloride tetra hydrate (CAS|RN|72556-74-2)
Other
Lecithins and other phosphoaminolipids
Other
Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25% (± 0,5%) by weight of tetramethylammonium hydroxide
Tetramethylammonium hydrogen phthalate (CAS RN 79723-02-7)
Tetrakis(dimethylditetradecylammonium) molybdate, (CAS RN|117342-25-3)
Tetrapropylammonium hydroxide, in the form of an aqueous solution containing: -|40|% (±|2|%) by weight of tetrapropylammonium hydroxide, -|0,3|% by weight or less of carbonate, -|0,1|% by weight or less of tripropylamine, -|500|mg/kg or less of bromide and -|25|mg/kg or less of potassium and sodium taken together
Tetraethylammonium hydroxide, in the form of an aqueous solution containing: -|35|% (±|0,5|%) by weight of tetraethylammonium hydroxide, -|not more than 1|000|mg/kg of chloride, -|not more than 2|mg/kg|of iron and -|not more than 10|mg/kg|of potassium
Diallyldimethylammonium chloride, in the form of an aqueous solution containing by weight 63|% or more but not more than 67|% of diallyldimethylammonium chloride, (CAS RN 7398-69-8)
N,N,N-Trimethylanilinium chloride (CAS|RN|138-24-9)
Other
Carboxyamide-function compounds; amide-function compounds of carbonic acid
Acyclic amides (including acyclic carbamates) and their derivatives; salts thereof
Meprobamate (INN)
Fluoroacetamide (ISO), monocrotophos (ISO) and phosphamidon (ISO)
Other
2-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN| 5165-97-9), or its ammonium salt|(CAS RN| 58374-69-9)
N-Ethyl N-Methylcarbamoyl Chloride (CAS|RN|42252-34-6)
(R)-(-)-3-(carbamoylmethyl)-5-methylhexanoic acid| (CAS|RN|181289-33-8)
Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0)
Acetamide (CAS|RN|60-35-5)
N-(1,1-Dimethyl-3-oxobutyl)acrylamide (CAS RN 2873-97-4)
Acrylamide (CAS RN 79-06-1)
N,N-Dimethylacrylamide (CAS RN 2680-03-7)
Methylcarbamate (CAS RN 598-55-0)
Tetrabutylurea (CAS RN 4559-86-8)
3-Iodoprop-2-ynyl N-butylcarbamate (CAS RN 55406-53-6)
Other
Cyclic amides (including cyclic carbamates) and their derivatives; salts thereof
Ureines and their derivatives; salts thereof
4,4'-Dihydroxy-7,7'-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts
(3-Aminophenyl)urea hydrochloride|(CAS RN 59690-88-9)
Other
2-Acetamidobenzoic acid (N-acetylanthranilic acid) and its salts
Ethinamate (INN)
Other
Lidocaine (INN)
Other
Aspartame (CAS RN 22839-47-0)
Alachlor (ISO), (CAS RN 15972-60-8)
4-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88-64-2)
Acetochlor (ISO), (CAS RN 34256-82-1)
2-(Trifluoromethyl) benzamide (CAS RN 360-64-5)
2-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic acid (CAS RN 3079-63-8)
2-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide (CAS RN|86763-47-5)
Benalaxyl-M (ISO) (CAS RN 98243-83-5)
2-Bromo-4-fluoroacetanilide (CAS RN 1009-22-9)
N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7)
Beflubutamid (ISO)|(CAS|RN|113614-08-7)
N,N'-1,4-Phenylenebis[3-oxobutyramide] (CAS RN 24731-73-5)
N,N'-(3,3'-Dimethylbiphenyl-4,4'-ylene)di(acetoacetamide) (CAS RN 91-96-3)
Propoxur (ISO) (CAS RN 114-26-1)
Methyl 2-amino-4-[[(2,5-dichlorophenyl)amino]carbonyl]benzoate (CAS|RN 59673-82-4)
4-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)
N,N'-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5)
N,N'-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 41131-65-1)
(S)-1-Phenylethanamine (S)-2-(((1R,2R)-2-allylcyclopropoxy)carbonylamino)-3,3-dimethylbutanoate (CUS|0143288-8)
2-Chlorobenzamide (CAS RN 609-66-5)
N-Ethyl-2-(isopropyl)-5-methylcyclohexanecarboxamide (CAS RN 39711-79-0)
N-(3',4'-dichloro-5-fluoro[1,1'-biphenyl]-2-yl)-acetamide (CAS RN 877179-03-8)
2-(4-Hydroxyphenyl)acetamide (CAS RN 17194-82-0)
Napropamide (ISO) (CAS RN 15299-99-7)
3-Amino-p-anisanilide (CAS RN 120-35-4)
5'-Chloro-3-hydroxy-2',4'-dimethoxy-2-naphthanilide (CAS RN 92-72-8)
p-Aminobenzamide (CAS RN 2835-68-9)
Anthranilamide of a purity by weight of 99,5|% or more (CAS RN 88-68-6)
Paracetamol (INN) (CAS RN 103-90-2)
5'-Chloro-3-hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-63-7)
Flutolanil (ISO) (CAS RN 66332-96-5)
3-Hydroxy-2'-methoxy-2-naphthanilide (CAS RN 135-62-6)
3-Hydroxy-2-naphthanilide (CAS RN 92-77-3)
3-Hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-61-5)
2'-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0)
1,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3)
Other
Carboxyimide-function compounds (including saccharin and its salts) and imine-function compounds
Imides and their derivatives; salts thereof
Saccharin and its salts
Saccharin and its sodium salt
Other
Glutethimide (INN)
Other
3,3′,4,4′,5,5′,6,6′-Octabromo-N,N′-ethylenediphthalimide; N,N′-ethylenebis(4,5-dibromohexahydro-3,6-methanophthalimide)
Other
N-Phenylmaleimide (CAS RN 941-69-5)
4,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)
N,N'-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)
Other
Imines and their derivatives; salts thereof
Chlordimeform (ISO)
Other
Dicyclohexylcarbodiimide (CAS RN 538-75-0)
N-[3-(Dimethylamino)propyl]-N'-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8)
Guanidine sulphamate (CAS RN 50979-18-5)
Other
Nitrile-function compounds
Acrylonitrile
1-Cyanoguanidine (dicyandiamide)
Fenproporex (INN) and its salts; methadone (INN) intermediate (4-cyano-2-dimethylamino-4,4-diphenylbutane)
Other
Isophthalonitrile
Other
Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95|% or more
alpha-Bromo-o-toluonitrile (CAS RN 22115-41-9)
Cyanoacetic acid (CAS RN 372-09-8)
4-Cyano-2-nitrobenzoic acid methyl ester (CAS RN 52449-76-0)
Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90|% or more
2-(m-Benzoylphenyl)propiononitrile|(CAS RN 42872-30-0)
Acrinathrin (ISO) (CAS RN 101007-06-1)
2,2-Dibromo-3-nitrilopropionamide|(CAS RN 10222-01-2)
Cyhalofop-butyl (ISO) (CAS|RN|122008-85-9)
Alpha-phenylacetoacetonitrile, CAS No 4468-48-8
Alkyl or alkoxyalkyl esters of cyanoacetic acid
Methyl-2-cyano-2-phenylbutyrate (CAS RN 24131-07-5)
m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3)
Esfenvalerate of a purity by weight of 83|% or more in a mixture of its own isomers (CAS RN 66230-04-4)
Malononitrile|(CAS RN 109-77-3)
Methacrylonitrile (CAS RN 126-98-7)
Chlorothalonil (ISO) (CAS RN 1897-45-6)
Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0)
Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8)
2-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9)
Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6)
Butyronitrile|(CAS RN 109-74-0)
Other
Diazo-, azo- or azoxy-compounds
2,2'-Dimethyl-2,2'-azodipropionamidine dihydrochloride
4-Anilino-2-methoxybenzenediazonium hydrogen sulphate|(CAS RN 36305-05-2)
4'-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4)
C.C'-Azodi(formamide) (CAS RN 123-77-3) in| the form of yellow powder with a decomposition temperature of 180°C or more but not more than 220°C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam
4,4'-Dicyano-4,4'-azodivaleric acid (CAS RN 2638-94-0)
4-[(2,5-Dichlorophenyl)azo]-3-hydroxy-2-naphthoic acid (CAS RN 51867-77-7)
C,C’-Azodi(formamide) (CAS RN 123-77-3) with: - a pH of 6,5 or more but not more than 7,5, and - a semicarbazide (CAS RN 57-56-7) content of not more than 1 500 mg/kg as determined by liquid chromatography mass spectrometry (LC-MS), - decomposition temperature range of 195 °C - 205 °C, - specific gravity 1,64 – 1,66, and - combustion heat 215 - 220 Kcal/mol
Other
Organic derivatives of hydrazine or of hydroxylamine
N,N-Bis(2-methoxyethyl)hydroxylamine
Other
3,3´-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N´-bipropionamide|(CAS RN 32687-78-8)
Cymoxanil (ISO) (CAS RN 57966-95-7)
Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99|% or more
Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98|% or more
Acetaldehyde oxime in an aqueous solution (CAS RN 107-29-9)
N-Isopropylhydroxylamine (CAS RN 5080-22-8)
2-Chloro-N-methoxy-N-methylacetamide (CAS RN 67442-07-3)
O-Ethylhydroxylamine, in the form of an aqueous solution|(CAS RN 624-86-2)
Tebufenozide (ISO) (CAS RN 112410-23-8)
Aqueous solution of 2,2'-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5|% but not more than 36,5|%
Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1)
Adipohydrazide|(CAS RN 1071-93-8)
2-Amino-3-(4-hydroxyphenyl) propanal semicarbazone hydrochloride
Butanone oxime (CAS RN 96-29-7)
Metaflumizone (ISO)|(CAS RN 139968-49-3)
Cyflufenamid (ISO) (CAS RN 180409-60-3)
Daminozide|(ISO) with|a purity by weight|of 99|% or more|(CAS RN 1596-84-5)
Other
Compounds with other nitrogen function
Isocyanates
Methylenedicyclohexyl diisocyanates|(CAS RN 28605-81-4)
3,3'-Dimethylbiphenyl-4,4'-diyl diisocyanate (CAS RN 91-97-4)
Butyl isocyanate (CAS RN 111-36-4)
m-Isopropenyl-α,α-dimethylbenzyl isocyanate|(CAS RN 2094-99-7)
m-Phenylenediisopropylidene diisocyanate|(CAS RN 2778-42-9)
2,5|(and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8)
Trimethylhexamethylene diisocyanate, mixed isomers
1,3-Bis(isocyanatomethyl) benzene (CAS RN 3634-83-1)
Other
Other
Sodium cyclamate
Diethylamino-triethoxysilane (CAS RN 35077-00-0)
Nitroguanidine (CAS RN 556-88-7)
Other
X. ORGANO-INORGANIC COMPOUNDS, HETEROCYCLIC COMPOUNDS, NUCLEIC ACIDS AND THEIR SALTS, AND SULPHONAMIDES
Organo-sulphur compounds
Thiocarbamates and dithiocarbamates
Prosulfocarb (ISO) (CAS RN 52888-80-9)
2-Isopropylethylthiocarbamate (CAS RN 141-98-0)
Other
Thiuram mono-, di- or tetrasulphides
Methionine
Methionine (INN)
Other
Captafol (ISO) and methamidophos (ISO)
Other
Cysteine and cystine
Derivatives of cysteine or cystine
Thiodiglycol (INN) (2,2′-thiodiethanol)
DL-2-hydroxy-4-(methylthio)butyric acid
2,2′-Thiodiethylbis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate]
Mixture of isomers consisting of 4-methyl-2,6-bis(methylthio)-m-phenylenediamine and 2-methyl-4,6-bis(methylthio)-m-phenylenediamine
2-(N,N-Diethylamino)ethanethiol
Other
2,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6)
Mercaptamine hydrochloride (CAS RN 156-57-0)
4-(Methylthio)benzaldehyde (CAS RN 3446-89-7)
Ethoprophos (ISO) (CAS RN 13194-48-4)
3-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1)
2-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate|(CAS RN 2494-88-4)
1-Methyl-5-[3-methyl-4-[4-[(trifluoromethyl)thio]phenoxy]phenyl]biuret, (CAS RN 106310-17-2)
N-(2-Methylsulfinyl-1,1-dimethyl-ethyl)-N'-{2-methyl-4-[1,2,2,2-tetrafluoro-1-(trifluoromethyl)ethyl]phenyl}phthalamide (CAS RN 371771-07-2)
[2,2'-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)
Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5|% or more
Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8)
Thiophanate-methyl (ISO) (CAS RN 23564-05-8)
Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5|% or more
2-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS|RN|26672-22-0)
Flubendiamide (ISO) (CAS RN 272451-65-7)
4-(4-Isopropoxyphenylsulphonyl)phenol|(CAS RN 95235-30-6)
2-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid|(CAS|RN 42986-22-1)
glutathione (CAS RN 70-18-8)
Ethanethioamide (CAS RN 62-55-5)
3,3´-Thiodi(propionic acid) (CAS RN 111-17-1)
Trimethylsulfoxonium iodide (CAS|RN|1774-47-6)
2-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate| (CAS RN 2494-89-5)
Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)
Thiourea (CAS RN 62-56-6)
Methyl (methylthio)acetate (CAS RN|16630-66-3)
Methyl phenyl sulphide|(CAS RN 100-68-5)
3-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2)
Pentaerythritol tetrakis(3-mercaptopropionate) (CAS RN 7575-23-7)
Diphenyl sulphide (CAS RN 139-66-2)
3-Bromomethyl-2-chloro-4-(methylsulphonyl)-benzoic acid (CAS RN 120100-05-2)
Clethodim (ISO) (CAS RN 99129-21-2)
4-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7)
4-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6)
Bis(3-triethoxysilylpropyl)tetrasulphide (CAS RN 40372-72-3)
Captan (ISO) (CAS RN 133-06-2)
Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3)
Methyl-p-tolyl sulphone (CAS RN 3185-99-7)
3-Sulphinobenzoic acid|(CAS RN 15451-00-0)
Dithiocarbonates (xanthates)
Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates
Other
Other
Other organo-inorganic compounds
Tetramethyl lead and tetraethyl lead
Tributyltin compounds
Other
Dimethyl methylphosphonate
Methylphosphonoyl difluoride (methylphosphonic difluoride)
Methylphosphonoyl dichloride (methylphosphonic dichloride)
(5-Ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphinan-5-yl)methyl methyl methylphosphonate; bis[(5-ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphinan-5-yl)methyl]methylphosphonate; 2,4,6-tripropyl-1,3,5,2,4,6-trioxatriphosphinane 2,4,6-trioxide; dimethyl propylphosphonate; diethyl ethylphosphonate; sodium 3-(trihydroxysilyl)propyl methylphosphonate; mixtures consisting mainly of methylphosphonic acid and (aminoiminomethyl)urea (in the ratio 50:50)
Etidronic acid (INN) (1-hydroxyethane-1,1-diphosphonic acid) and its salts
(Nitrilotrimethanediyl)tris(phosphonic acid), {ethane-1,2-diylbis[nitrilobis(methylene)]}tetrakis(phosphonic acid), [(bis{2-[bis(phosphonomethyl)amino]ethyl}amino)methyl]phosphonic acid, {hexane-1,6-diylbis[nitrilobis(methylene)]}tetrakis(phosphonic acid), {[(2-hydroxyethyl)imino]bis(methylene)}bis(phosphonic acid), and [(bis{6-[bis(phosphonomethyl)amino]hexyl}amino)methyl]phosphonic acid; salts thereof
Other
Butylethylmagnesium|(CAS RN 62202-86-2), in the form of a solution in heptane
Diethylmethoxyborane (CAS RN 7397-46-8), whether or not in the form of a solution in tetrahydrofuran according to|note 1e|to Chapter 29|of the CN
Sodium diisobutyldithiophosphinate (CAS RN|13360-78-6) in an aqueous solution
Trioctylphosphine oxide (CAS RN 78-50-2)
Methylcyclopentadienyl manganese tricarbonyl containing not more than 4,9|% by weight of cyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3)
Methyl tris (2-pentanoneoxime) silane (CAS RN 37859-55-5)
Di-tert-butylphosphane (CAS RN 819-19-2)
(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)
N-(Phosphonomethyl)iminodiacetic acid|(CAS RN 5994-61-6)
Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6)
Dimethyl[dimethylsilyldiindenyl]hafnium|(CAS RN 220492-55-7)
N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate|(CAS RN 118612-00-3)
Phenylphosphonic dichloride (CAS RN 824-72-6)
Tetrakis(hydroxymethyl)phosphonium chloride|(CAS RN 124-64-1)
Mixture of the isomers 9-icosyl-9-phosphabicyclo[3.3.1]nonane and 9-icosyl-9-phosphabicyclo[4.2.1]nonane
Tris(4-methylpentan-2-oximino)methylsilane|(CAS RN 37859-57-7)
Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4)
Trimethylsilane|(CAS RN 993-07-7)
Trimethylborane (CAS RN 593-90-8)
3-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8)
Trimethyl phosphonoacetate (CAS|RN|5927-18-4)
4-Chloro-2-fluoro-3-methoxyphenylboronic acid (CAS|RN|944129-07-1)
Chloroethenyldimethylsilane (CAS|RN|1719-58-0)
Bis(4-tert-butylphenyl)iodonium hexafluorophosphate (CAS RN 61358-25-6)
Dimethyltin dioleate (CAS RN 3865-34-7)
(4-Propylphenyl)boronic acid (CAS|RN|134150-01-9)
Other
Heterocyclic compounds with oxygen hetero-atom(s) only
Compounds containing an unfused furan ring (whether or not hydrogenated) in the structure
Tetrahydrofuran
2-Furaldehyde (furfuraldehyde)
Furfuryl alcohol and tetrahydrofurfuryl alcohol
Tetrahydrofurfuryl alcohol (CAS RN 97-99-4)
Other
Other
Tetrahydrofuran-borane (CAS RN 14044-65-6)
Anhydrous mannitol or sorbitol compounds, excluding maltol and isomaltol
Furan|(CAS RN 110-00-9)|of a purity by weight of 99|% or more
2,2|di(tetrahydrofuryl)propane (CAS RN 89686-69-1)
1,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4|deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)
Flurtamone (ISO) (CAS RN 96525-23-4)
Furfurylamine (CAS RN 617-89-0)
Tetrahydro-2-methylfuran (CAS RN 96-47-9)
5-Nitrofurfurylidene di(acetate)|(CAS RN 92-55-7)
Other
Lactones
Phenolphthalein; 1-hydroxy-4-[1-(4-hydroxy-3-methoxycarbonyl-1-naphthyl)-3-oxo-1H,3H-benzo[de]isochromen-1-yl]-6-octadecyloxy-2-naphthoic acid; 3′-chloro-6′-cyclohexylaminospiro[isobenzofuran-1(3H),9′-xanthen]-3-one; 6′-(N-ethyl-p-toluidino)-2′-methylspiro[isobenzofuran-1(3H),9′-xanthen]-3-one; methyl-6-docosyloxy-1-hydroxy-4-[1-(4-hydroxy-3-methyl-1-phenanthryl)-3-oxo-1H,3H-naphtho[1,8-cd]pyran-1-yl]naphthalene-2-carboxylate
gamma-Butyrolactone
Other
2'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3-one|(CAS RN 70516-41-5)
Coumarin (CAS RN 91-64-5)
Ethyl 6'-(diethylamino)-3-oxo-3H-spiro[2-benzofuran-1,9'-xanthene]-2'-carboxylate (CAS RN 154306-60-2)
Decan-5-olide (CAS RN 705-86-2)
Dodecan-5-olide (CAS RN 713-95-1)
6'-Diethylamino-3'-methyl-2'-(2,4-xylidino)spiro[isobenzofuran-1(3H),9'-xanthen]-3-one|(CAS RN 36431-22-8)
(S)-(−)-α-Amino-γ-butyrolactonehydrobromide (CAS RN 15295-77-9)
2,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1)
6-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7)
6'-(Diethylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 29512-49-0)
Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)
3',6'-Bis(ethylamino)-2',7'-dimethylspiro[isobenzofuran-1(3H),9'-[9H]-xanthen]-3-one, (CAS RN 41382-37-0)
6'-(Dibutylamino)-3'-methyl-2'-(phenylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 89331-94-2)
2'-[Bis(phenylmethyl)amino]-6'-(diethylamino)-spiro[isobenzofuran-1(3H),9'-[9H]xanthen]-3-one (CAS RN 34372-72-0)
Hexan-6-olide (CAS RN 502-44-3)
Gibberellic acid with a minimum purity by weight of 88|% (CAS RN 77-06-5)
Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2|(1H)-one (CAS RN 564-20-5)
Methylcoumarins and ethylcoumarins
Other
Other
Isosafrole
1-(1,3-Benzodioxol-5-yl)propan-2-one
Piperonal
Safrole
Tetrahydrocannabinols (all isomers)
Other
Bendiocarb (ISO) (CAS RN 22781-23-3)
1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5)
Ethyl-2-methyl-1,3-dioxolane-2-acetate (CAS RN 6413-10-1)
1-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)
1,3:2,4-Bis-O-(3,4-dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2)
Ethofumesate (ISO) (CAS RN 26225-79-6)| with a purity by weight of 97|% or more
2-Butylbenzofuran (CAS RN 4265-27-4)
7-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)
1,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS|RN|24388-70-3)
6-Fluoro-3,4-dihydro-2H-1-benzopyran-2-carboxylic acid (CAS RN 99199-60-7)
4,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)
1,3:2,4-bis-O-Benzylidene-D-glucitol (CAS RN 32647-67-9)
3-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0)
1,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0)
Other
Heterocyclic compounds with nitrogen hetero-atom(s) only
Compounds containing an unfused pyrazole ring (whether or not hydrogenated) in the structure
Phenazone (antipyrin) and its derivatives
Propyphenazone (INN)
Other
Other
Phenylbutazone (INN)
Other
Pyrasulfotole (ISO) (CAS RN 365400-11-9)| with a purity by weight of 96|% or more
3-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9)
3-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0)
1,3-Dimethyl-5-fluoro-1H-pyrazole-4-carbonyl fluoride (CAS|RN|191614-02-5)
Edaravone (INN) (CAS RN 89-25-8)
Fenpyroximate (ISO) (CAS RN 134098-61-6)
Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9)
4,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2)
3-(4,5-Dihydro-3-methyl-5-oxo-1H-pyrazol-1-yl)benzenesulphonic acid (CAS RN 119-17-5)
Allyl 5-amino-4-(2-methylphenyl)-3-oxo-2,3-dihydro-1H-1-pyrazolcarbothioat (CAS RN 473799-16-5)
Other
Compounds containing an unfused imidazole ring (whether or not hydrogenated) in the structure
Hydantoin and its derivatives
Iprodione (ISO) (CAS RN 36734-19-7) with a purity by weight of 97|% or more
1-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) / (CAS RN 32718-18-6)
1-Aminohydantoin hydrochloride (CAS|RN|2827-56-7)
DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9)
α-(4-Methoxybenzoyl)-α-(1-benzyl-5-ethoxy-3-hydantoinyl)-2-chloro-5-dodecyloxycarbonylacetanilide (CAS RN 70950-45-7)
5,5-Dimethylhydantoin (CAS RN 77-71-4)
Other
Other
Naphazoline hydrochloride (INNM) and naphazoline nitrate (INNM); phentolamine (INN); tolazoline hydrochloride (INNM)
Other
Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0)
Prochloraz (ISO) (CAS RN 67747-09-5)
1-Trityl-4-formylimidazole|(CAS RN 33016-47-6)
Triflumizole (ISO) (CAS RN 68694-11-1)
Prochloraz copper chloride (ISO) (CAS RN 156065-03-1)
1,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9)
Fenamidone (ISO) (CAS RN 161326-34-7)| with a purity by weight of 97|% or more
1-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea|(CAS RN 52378-40-2)
(S)-tert-Butyl 2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8)
Cyazofamid (ISO), (CAS RN 120116-88-3)
Imazalil (ISO) (CAS RN 35554-44-0)
Other
Compounds containing an unfused pyridine ring (whether or not hydrogenated) in the structure
Pyridine and its salts
Piperidine and its salts
Alfentanil (INN), anileridine (INN), bezitramide (INN), bromazepam (INN), difenoxin (INN), diphenoxylate (INN), dipipanone (INN), fentanyl (INN), ketobemidone (INN), methylphenidate (INN), pentazocine (INN), pethidine (INN), pethidine (INN) intermediate A, phencyclidine (INN) (PCP), phenoperidine (INN), pipradrol (INN), piritramide (INN), propiram (INN) and trimeperidine (INN); salts thereof
Other
Iproniazid (INN); ketobemidone hydrochloride (INNM); pyridostigmine bromide (INN)
2,3,5,6-Tetrachloropyridine
3,6-Dichloropyridine-2-carboxylic acid
2-Hydroxyethylammonium-3,6-dichloropyridine-2-carboxylate
2-Butoxyethyl(3,5,6-trichloro-2-pyridyloxy)acetate
3,5-Dichloro-2,4,6-trifluoropyridine
Fluroxypyr (ISO), methyl ester
4-Methylpyridine
Other
2-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride(CAS|RN|153259-31-5)
2,3-Dichloropyridine (CAS RN 2402-77-9)
Methyl (1S,3S,4R)-2-[(1R)-1-phenylethyl]-2-azabicyclo[2.2.1]hept-5-ene-3-carboxylate (CAS|RN|130194-96-6)
N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5)
Pyridine-2,3-dicarboxylic acid (CAS RN 89-00-9)
Methyl (2S,5R)-5-[(benzyloxy)amino]piperidine-2-carboxylate dihydrochloride (CAS RN 1501976-34-6)
3,5-Dimethylpyridine (CAS RN 591-22-0)
6-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)
Methyl nicotinate (INNM) (CAS RN 93-60-7)
Copper pyrithione powder (CAS RN 14915-37-8)
Boscalid (ISO) (CAS RN 188425-85-6)
Isonicotinic Acid (CAS|RN|55-22-1)
2-Chloro-3-cyanopyridine (CAS RN 6602-54-6)
2-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3)
Imazethapyr (ISO)|(CAS RN 81335-77-5)
2-[4-(Hydrazinylmethyl)phenyl]-pyridine dihydrochloride (CAS RN 1802485-62-6)
Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate (CAS|RN 212322-56-0)
2-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride(CAS RN 127337-60-4)
2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride|(CAS RN 72830-09-2)
3-Chloro-(5-trifluoromethyl)-2-pyridineacetonitrile (CAS RN 157764-10-8)
Aminopyralid (ISO) (CAS RN 150114-71-9)
Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt|(CAS RN 3811-73-2)
2-Chloropyridine (CAS RN 109-09-1)
2,2,6,6-Tetramethylpiperidine|(CAS RN 768-66-1)
2,2,6,6-tetramethylpiperidin-4-ol (CAS RN 2403-88-5)
Chlorpyrifos (ISO) (CAS RN 2921-88-2)
5-Difluoromethoxy-2-[[(3,4-dimethoxy-2-pyridyl)methyl]thio]-1H-benzimidazole (CAS RN 102625-64-9)
(-)-trans-4-(4'-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5)
Flonicamid (ISO) (CAS RN 158062-67-0)
N-Fluoro-2,6-dichloropyridinium tetrafluoroborate (CAS RN 140623-89-8)
3-Bromopyridine (CAS RN 626-55-1)
Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97|% or more
Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate|(CAS RN 1083057-14-0)
4-Chloro-1-methylpiperidine (CAS RN 5570-77-4)
2-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0)
2-Aminomethyl-3-chloro-5-trifluoromethylpyridine hydrochloride (CAS RN 326476-49-7)
Acetamiprid (ISO) (CAS RN 135410-20-7)
(1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387-74-2)
2,3-Dichloro-5-trifluoromethylpyridine, (CAS RN 69045-84-7)
5,6-Dimethoxy-2-[(4-piperidinyl)methyl]indan-1-one, (CAS RN 120014-30-4)
Imazamox (ISO) (CAS RN 114311-32-9)
2-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)
Other
Compounds containing in the structure a quinoline or isoquinoline ring-system (whether or not hydrogenated), not further fused
Levorphanol (INN) and its salts
Other
Halogen derivatives of quinoline; quinolinecarboxylic acid derivatives
Quinmerac (ISO) (CAS RN 90717-03-6)
3-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7)
Ethyl 4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 52980-28-6)
4,7-Dichloroquinoline (CAS|RN|86-98-6)
1-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS|RN|94695-52-0)
Other
Dextromethorphan (INN) and its salts
Other
Quinoline (CAS RN 91-22-5)
[1-(4-Benzyloxy-benzyl)-2-cyclobutylmethyl-octahydro-isoquinoline-4a,8a-diol] (CUS 0141126-3)
Isoquinoline (CAS RN 119-65-3)
Quinolin-8-ol (CAS RN 148-24-3)
Ethyl 6,7,8-trifluoro-1-[formyl(methyl)amino]-4-oxo-1,4-dihydroquinoline-3-carboxylate (CAS RN 100276-65-1)
Other
Compounds containing a pyrimidine ring (whether or not hydrogenated) or piperazine ring in the structure
Malonylurea (barbituric acid) and its salts
Malonylurea (barbituric acid) (CAS RN 67-52-7)
Other
Allobarbital (INN), amobarbital (INN), barbital (INN), butalbital (INN), butobarbital, cyclobarbital (INN), methylphenobarbital (INN), pentobarbital (INN), phenobarbital (INN), secbutabarbital (INN), secobarbital (INN) and vinylbital (INN); salts thereof
Phenobarbital (INN), barbital (INN), and their salts
Other
Other derivatives of malonylurea (barbituric acid); salts thereof
Loprazolam (INN), mecloqualone (INN), methaqualone (INN) and zipeprol (INN); salts thereof
Other
Diazinon (ISO)
1,4-Diazabicyclo[2.2.2]octane (triethylenediamine)
Other
6-Amino-1,3-dimethyluracil (CAS RN 6642-31-5)
2-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS|RN|42487-72-9)
Sitagliptin phosphate monohydrate (CAS RN 654671-77-9)
N,N'-(4,6-Dichloropyrimidine-2,5-diyl)diformamide (CAS RN 116477-30-6)
1-Methyl-3-phenylpiperazine (CAS RN 5271-27-2)
2,4-Diamino-6-chloropyrimidine|(CAS RN 156-83-2)
N-(2-oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS|RN|26661-13-2)
6-Chloro-3-methyluracil|(CAS RN 4318-56-3)
2-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8)
Mepanipyrim (ISO) (CAS RN 110235-47-7)
4,6-Dichloro-5-fluoropyrimidine (CAS RN|213265-83-9)
6-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one (CAS RN 200938-58-5)
2-(4-(2-Hydroxyethyl)piperazin-1-yl)ethanesulfonic acid (CAS|RN|7365-45-9)
1-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1)
6-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94|% or more
2-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1)
5-Fluoro-2-methoxypyrimidin-4(3H)-one (CAS RN 1480-96-2)
5,7-Dimethoxy(1,2,4)triazolo(1,5-a)pyrimidin-2-amine (CAS|RN|13223-43-3)
2,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8)
1-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681-55-6)
N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9)
Triacetylganciclovir (CAS RN 86357-14-4)
(2R,3S/2S,3R)-3-(6-Chloro-5-fluoro pyrimidin-4-yl)-2-(2,4-difluorophenyl)-1-(1H-1,2,4-triazol-1-yl)butan-2-ol hydrochloride, (CAS RN 188416-20-8)
3-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)
Other
Compounds containing an unfused triazine ring (whether or not hydrogenated) in the structure
Melamine
Other
Atrazine (ISO); propazine (ISO); simazine (ISO); hexahydro-1,3,5-trinitro-1,3,5-triazine (hexogen, trimethylenetrinitramine)
Methenamine (INN) (hexamethylenetetramine); 2,6-di-tert-butyl-4-[4,6-bis(octylthio)-1,3,5-triazin-2-ylamino]phenol
Other
1,3,5-Triazinane-2,4,6-trione-1,3,5-triazine-2,4,6-triamine(1:1) (CAS RN 37640-57-6)
Metribuzin (ISO) (CAS|RN|21087-64-9) with a purity by weight of 93|% or more
2-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS|RN|3140-73-6)
Benzoguanamine (CAS RN 91-76-9)
1,3,5-Triazine-2,4,6-triamine monophosphate|(CAS RN 20208-95-1)
1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5)
Troclosene sodium (INNM)|(CAS RN 2893-78-9)
1,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9)
Terbutryn (ISO) (CAS RN 886-50-0)
Cyanuric acid (CAS RN 108-80-5)
1,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6)
Trichloroisocyanuric acid, also referred to as ‘symclosene’ under the international non-proprietary name (INN)
Metamitron (ISO) (CAS RN 41394-05-2)
Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7)
Other
Lactams
6-Hexanelactam (epsilon-caprolactam)
Clobazam (INN) and methyprylon (INN)
Other lactams
5-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)
6-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6)
3,3-Pentamethylene-4-butyrolactam (CAS RN 64744-50-9)
(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate (CAS RN 754186-36-2)
Other
Other
Alprazolam (INN), camazepam (INN), chlordiazepoxide (INN), clonazepam (INN), clorazepate, delorazepam (INN), diazepam (INN), estazolam (INN), ethyl loflazepate (INN), fludiazepam (INN), flunitrazepam (INN), flurazepam (INN), halazepam (INN), lorazepam (INN), lormetazepam (INN), mazindol (INN), medazepam (INN), midazolam (INN), nimetazepam (INN), nitrazepam (INN), nordazepam (INN), oxazepam (INN), pinazepam (INN), prazepam (INN), pyrovalerone (INN), temazepam (INN), tetrazepam (INN) and triazolam (INN); salts thereof
Chlordiazepoxide (INN)
Other
Other
Indole, 3-methylindole (skatole), 6-allyl-6,7-dihydro-5H-dibenz[c,e]azepine (azapetine), phenindamine (INN) and their salts; imipramine hydrochloride (INNM)
2,4-Di-tert-butyl-6-(5-chlorobenzotriazol-2-yl)phenol
Other
2-(2H-Benzotriazol-2-yl)-4,6-di-tert-butylphenol (CAS RN 3846-71-7)
Fenbuconazole (ISO) (CAS RN 114369-43-6)
Myclobutanil (ISO) (CAS RN 88671-89-0)
5-Difluormethoxy-2-mercapto-1-H-benzimidazole|(CAS RN 97963-62-7)
2-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS|RN|98809-58-6)
2-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1)
Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90|% or more
Carfentrazone-ethyl (ISO) (CAS|RN|128639-02-1) with a purity by weight of 93|% or more
4,4'-[(9-Butyl-9H-carbazol-3-yl)methylene]bis[N-methyl-N-phenylaniline] (CAS RN 67707-04-4)
2-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol|(CAS|RN|112281-82-0)
2-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol|(CAS RN 70321-86-7)
1-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)
(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4)
Tebuconazole (ISO) (CAS RN 107534-96-3)| with a purity by weight of 95|% or more
1,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)
(2S,3S,4R)-Methyl 4-(3-(1,1-difluorobut-3-enyl)-7-methoxyquinoxalin-2-yloxy)-3-ethylpyrrolidine-2-carboxylate 4-methylbenzenesulfonate (CUS 0143289-9)
5,6-Dimethylbenzimidazole (CAS RN 582-60-5)
N-(2,3-Dihydro-2-oxo-1H-benzimidazol-5-yl)-3-hydroxynaphthalene-2-carboxamide (CAS RN 26848-40-8)
3-[3-(4-Fluorophenyl)-1-(1-methylethyl)-1H-indol-2-yl]-(E)-2-propenal (CAS|RN|93957-50-7)
Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3)
Triadimenol (ISO) (CAS|RN|55219-65-3) with a purity by weight of 97|% or more
Penconazole (ISO) (CAS RN 66246-88-6)
8-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1)
trans-4-Hydroxy-L-proline (CAS RN 51-35-4)
2,3-Dihydro-1H-pyrrole[3,2,1-ij]quinoline (CAS RN 5840-01-7)
Maleic hydrazide (ISO) (CAS RN 123-33-1)
Paclobutrazol (ISO) (CAS RN 76738-62-0)
Metconazole (ISO) (CAS RN 125116-23-6)
N-Boc-trans-4-Hydroxy-L-proline methyl ester|(CAS|RN|74844-91-0)
Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CUS|0133723-1)
3-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)
Pyridaben (ISO) (CAS RN 96489-71-3)
2-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1)
1H-Indole-6-carboxylic acid (CAS RN 1670-82-2)
Candesartan ethyl ester (INNM), (CAS RN 139481-58-6)
10-Methoxyiminostilbene (CAS RN 4698-11-7)
1,4,7-Trimethyl-1,4,7-Triazacyclononane
5-(acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)
Imidazo[1,2-b] pyridazine-hydrochloride (CAS RN 18087-70-2)
3-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7)
1,2,3-Benzotriazole (CAS RN 95-14-7)
Tolytriazole (CAS RN 29385-43-1)
Carbendazim (ISO) (CAS RN 10605-21-7)
Other
Nucleic acids and their salts, whether or not chemically defined; other heterocyclic compounds
Compounds containing an unfused thiazole ring (whether or not hydrogenated) in the structure
Hexythiazox (ISO)|(CAS RN 78587-05-0)
4-Nitrophenyl thiazol-5-ylmethyl carbonate (CAS RN 144163-97-3)
2-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8)
(S)-Ethyl-2-(3-((2-isopropylthiazol-4-yl)methyl)-3-methylureido)-4-morpholinobutanoate oxalate (CAS RN 1247119-36-3)
(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)
(Z)-2-(2-tert-butoxycarbonylaminothiazol-4-yl)-2-pentenoic acid (CAS RN 86978-24-7)
2-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8)
Fosthiazate (ISO) (CAS RN 98886-44-3)
2-(Formylamino)-4-thiazoleacetyl chloride, hydrochloride|(CAS RN 372092-18-7)
3,4-Dichloro-5-carboxyisothiazole|(CAS RN 18480-53-0)
Other
Compounds containing in the structure a benzothiazole ring-system (whether or not hydrogenated), not further fused
Di(benzothiazol-2-yl)disulphide; benzothiazole-2-thiol (mercaptobenzothiazole) and its salts
Other
S-1,3-Benzothiazol-2-yl (2Z)-(5-amino-1,2,4-thiadiazol-3-yl)(methoxyimino)ethanethioate (CAS RN 89604-91-1)
2-[[(Z)-[1-(2-Amino-4-thiazolyl)-2-(2-benzothiazolylthio)-2-oxoethylidene]amino]oxy]-acetic acid, methyl ester|(CAS RN 246035-38-1)
1,2-Benzisothiazol-3(2H)-one (Benzisothiazolinone (BIT)) (CAS RN 2634-33-5)
S-(1,3-Benzothiazol-2-yl)-(Z)-2-(2-aminothiazol-4-yl)-2-(acetyloxyimino)thioacetate, (CAS RN 104797-47-9)
Benzothiazol-2-yl-(Z)-2-trityloxyimino-2-(2-aminothiazole-4-yl)-thioacetate (CAS RN 143183-03-3)
N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)
Other
Compounds containing in the structure a phenothiazine ring-system (whether or not hydrogenated), not further fused
Thiethylperazine (INN); thioridazine (INN) and its salts
Other
2-Methylthiophenothiazine (CAS RN 7643-08-5)
Other
Other
Aminorex (INN), brotizolam (INN), clotiazepam (INN), cloxazolam (INN), dextromoramide (INN), haloxazolam (INN), ketazolam (INN), mesocarb (INN), oxazolam (INN), pemoline (INN), phendimetrazine (INN), phenmetrazine (INN) and sufentanil (INN); salts thereof
Other
Chlorprothixene (INN); thenalidine (INN) and its tartrates and maleates; furazolidone (INN); 7-aminocephalosporanic acid; salts and esters of (6R,7R)-3-acetoxymethyl-7-[(R)-2-formyloxy-2-phenylacetamido]-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid; 1-[2-(1,3-dioxan-2-yl)ethyl]-2-methylpyridinium bromide
Other
Fluralaner (INN) (CAS RN 864731-61-3)
Methyl 3-{1,4-dioxaspiro[4.5]dec-8-yl[(trans-4-methylcyclohexyl)carbonyl]amino}-5-iodothiophene-2-carboxylate| (CAS RN 1026785-65-8)
Dimethomorph (ISO) (CAS RN 110488-70-5)
Buprofezin (ISO) of a purity by weight of 98,5|% or more (CAS RN 953030-84-7)
Ethyl N-{[1-methyl-2-({[4-(5-oxo-4,5-dihydro-1,2,4-oxadiazol-3-yl)phenyl]amino}methyl)-1H-benzimidazol-5-yl]carbonyl}-N-pyridin-2-yl-b-alaninate (CAS RN 872728-84-2)
Carboxin (ISO) (CAS RN 5234-68-4)
Difenoconazole (ISO) (CAS RN 119446-68-3)
Methyl(1,8-diethyl-1,3,4,9-tetrahydropyrano[3,4-b]indol-1-yl)acetate (CAS RN 122188-02-7)
3,3-bis(2-Methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0)
2-[4-(Dibenzo[b,f][1,4]thiazepin-11-yl)piperazin-1-yl] ethanol(CAS RN 329216-67-3)
Thiophene (CAS RN 110-02-1)
Acesulfame potassium (potassium salt of 6-methyl-1,2,3-oxathiazin-4(3H)-one 2,2-dioxide; CAS RN 55589-62-3) ace-K
7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(2-methyl-1-octyl-1H-indol-3-yl) furo[3,4-b]pyridin-5(7H)-one (CAS RN 87563-89-1)
Bromuconazole (ISO) with|a purity by weight of 96|% or more|(CAS RN 116255-48-2)
Flufenacet (ISO) (CAS RN 142459-58-3)| with a purity by weight of 95|% or more
2,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)
4-Methylmorpholine 4-oxide| in an aqueous solution (CAS RN 7529-22-8)
2-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2)
11-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride|(CAS RN 111974-74-4)
Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7)
Uridine 5′-diphospho-N-acetylgalactosamine disodium salt|(CAS RN 91183-98-1)
Uridine 5′-diphosphoglucuronic acid trisodium salt|(CAS RN 63700-19-6)
7-[4-(Diethylamino)-2-ethoxyphenyl]-7-(1-ethyl-2-methyl-1H-indol-3-yl)furo[3,4-b]pyridin-5(7H)-one (CAS RN 69898-40-4)
Dimethenamide (ISO)|(CAS RN 87674-68-8)
Oxadiazon| (ISO) (CAS RN 19666-30-9) with a purity by weight of 95|% or more
4-Propan-2-ylmorpholine (CAS RN 1004-14-4)
Clomazone (ISO)|(CAS|RN|81777-89-1) with a purity by weight of 96|% or more
4-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)
11-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)
1-(Morpholin-4-yl)prop-2-en-1-one (CAS RN 5117-12-4)
Clopidogrel acid hydrochloride (CAS RN 144750-42-5)
Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92|% or more
Tris(2,3-epoxypropyl)-1,3,5-triazinanetrione (CAS RN 2451-62-9)
Propan-2-ol|--|2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate, (CAS RN 864743-41-9)
10-[1,1'-Biphenyl]-4-yl-2-(1-methylethyl)-9-oxo-9H-thioxanthenium hexafluorophosphate (CAS RN 591773-92-1)
DL-Homocysteine thiolactone hydrochloride|(CAS RN 6038-19-3)
Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0)
1-[3-(5-Nitro-2-furyl)allylideneamino]imidazolidine-2,4-dione (CAS RN 1672-88-4)
2-Isopropylthioxanthone (CAS RN 5495-84-1)
(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1)
2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5)
Potassium 5-methyl-1,3,4-oxadiazole-2-carboxylate (CAS RN 888504-28-7)
Thiophen-2-ethanol (CAS RN 5402-55-1)
Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96|% or more
Etoxazole (ISO) (CAS RN 153233-91-1) of a purity by weight of 94,8|% or more
Dithianon (ISO) (CAS RN 3347-22-6)
2,2'-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)
Other
Sulphonamides
3-{1-[7-(Hexadecylsulphonylamino)-1H-indole-3-yl]-3-oxo-1H,3H-naphtho[1,8-cd]pyran-1-yl}-N,N-dimethyl-1H-indole-7-sulphonamide; metosulam (ISO)
Other
Florasulam (ISO)|(CAS|RN|145701-23-1)
Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5)
6-Methyl-4-oxo-5,6-dihydro-4H-thieno[2,3-b]thiopyran-2-sulfonamide (CAS RN 120279-88-1)
Toluenesulphonamides
N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide|(CAS RN 64488-52-4)
Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7)
Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate|(CAS RN 147118-40-9)
N-Fluorobenzenesulphonimide (CAS RN 133745-75-2)
Chlorsulfuron (ISO) (CAS RN 64902-72-3)
Imazosulfuron (ISO), of a purity by weight of 98|% or more (CAS RN 122548-33-8)
Penoxsulam (ISO) (CAS RN 219714-96-2)
Oryzalin (ISO) (CAS|RN|19044-88-3)
Rimsulfuron (ISO) (CAS RN 122931-48-0)
Halosulfuron-methyl (ISO) (CAS RN 100784-20-1) with a purity by weight of 98|% or more
(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid|--|1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1), (CAS RN 1235588-99-4)
4,4'-Oxydi(benzenesulphonohydrazide)|(CAS RN 80-51-3)
(1R,2R)-1-Amino-2-(difluoromethyl)-N-(1-methylcyclopropylsulphonyl) cyclopropanecarboxamide hydrochloride (CUS|0143290-2)
2,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4)
Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95|% or more
Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3)
N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)
N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS|RN|215917-77-4)
1-Methylcyclopropane-1-sulphonamide (CAS RN 669008-26-8)
Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94|% by weight or more
Nicosulphuron (ISO), (CAS RN 111991-09-4) of a purity by weight of 91|% or more
Tribenuron-methyl (ISO) (CAS RN 101200-48-0)
Metsulfuron-methyl (ISO) (CAS RN 74223-64-6)
[[4-[2-[[(3-Ethyl-2,5-dihydro-4-methyl-2-oxo-1H-pyrrol-1-yl)carbonyl]amino] ethyl]phenyl]sulfonyl]-carbamic acid ethyl ester, (CAS RN 318515-70-7)
4-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8)
N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride
N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN|25646-71-3)
3-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)
Other
XI. PROVITAMINS, VITAMINS AND HORMONES
Provitamins and vitamins, natural or reproduced by synthesis (including natural concentrates), derivatives thereof used primarily as vitamins, and intermixtures of the foregoing, whether or not in any solvent
Vitamins and their derivatives, unmixed
Vitamins|A and their derivatives
Vitamin|B@1|and its derivatives
Vitamin|B@2|and its derivatives
D- or DL-Pantothenic acid (vitamin|B@3|or vitamin|B@5) and its derivatives
Vitamin|B@6|and its derivatives
Vitamin|B@1@2|and its derivatives
Vitamin|C and its derivatives
Vitamin|E and its derivatives
Other vitamins and their derivatives
Other, including natural concentrates
Hormones, prostaglandins, thromboxanes and leukotrienes, natural or reproduced by synthesis; derivatives and structural analogues thereof, including chain modified polypeptides, used primarily as hormones
Polypeptide hormones, protein hormones and glycoprotein hormones, their derivatives and structural analogues
Somatotropin, its derivatives and structural analogues
Insulin and its salts
Other
Steroidal hormones, their derivatives and structural analogues
Cortisone, hydrocortisone, prednisone (dehydrocortisone) and prednisolone (dehydrohydrocortisone)
Halogenated derivatives of corticosteroidal hormones
Oestrogens and progestogens
Other
Prostaglandins, thromboxanes and leukotrienes, their derivatives and structural analogues
Other
XII. GLYCOSIDES AND VEGETABLE ALKALOIDS, NATURAL OR REPRODUCED BY SYNTHESIS, AND THEIR SALTS, ETHERS, ESTERS AND OTHER DERIVATIVES
Glycosides, natural or reproduced by synthesis, and their salts, ethers, esters and other derivatives
Rutoside (rutin) and its derivatives
Other
Digitalis glycosides
Glycyrrhizic acid and glycyrrhizates
Ammonium glycyrrhizate (CAS RN 53956-04-0)
Other
Other
Hesperidin (CAS RN 520-26-3)
Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0)
Other
Vegetable alkaloids, natural or reproduced by synthesis, and their salts, ethers, esters and other derivatives
Alkaloids of opium and their derivatives; salts thereof
Concentrates of poppy straw; buprenorphine (INN), codeine, dihydrocodeine (INN), ethylmorphine, etorphine (INN), heroin, hydrocodone (INN), hydromorphone (INN), morphine, nicomorphine (INN), oxycodone (INN), oxymorphone (INN), pholcodine (INN), thebacon (INN) and thebaine; salts thereof
Other
Alkaloids of cinchona and their derivatives; salts thereof
Caffeine and its salts
Ephedrines and their salts
Ephedrine and its salts
Pseudoephedrine (INN) and its salts
Cathine (INN) and its salts
Norephedrine and its salts
Other
Theophylline and aminophylline (theophylline-ethylenediamine) and their derivatives; salts thereof
Fenetylline (INN) and its salts
Other
Alkaloids of rye ergot and their derivatives; salts thereof
Ergometrine (INN) and its salts
Ergotamine (INN) and its salts
Lysergic acid and its salts
Other
Other
Cocaine, ecgonine, levometamfetamine, metamfetamine (INN), metamfetamine racemate; salts, esters and other derivatives thereof
Other
(1R,2S)-(-)-chloroephedrine CAS No 110925-64-9
(1S,2R)-(+)-chloroephedrine CAS No 1384199-95-4
Other(1S,2S)-(+)-chloropseudoephedrine CAS No 73393-61-0
Other(1R,2R)-(-)-chloropseudoephedrine CAS No 771434-80-1
Other
XIII. OTHER ORGANIC COMPOUNDS
Sugars, chemically pure, other than sucrose, lactose, maltose, glucose and fructose; sugar ethers, sugar acetals and sugar esters, and their salts, other than products of heading|2937, 2938|or 2939
Rhamnose, raffinose and mannose
Other
D-Xylose (CAS RN 58-86-6)
Other
Antibiotics
Penicillins and their derivatives with a penicillanic acid structure; salts thereof
Streptomycins and their derivatives; salts thereof
Dihydrostreptomycin, its salts, esters and hydrates
Dihydrostreptomycin sulphate (CAS RN 5490-27-7)
Other
Other
Tetracyclines and their derivatives; salts thereof
Chloramphenicol and its derivatives; salts thereof
Erythromycin and its derivatives; salts thereof
Other
Other organic compounds
PHARMACEUTICAL PRODUCTS
Glands and other organs for organo-therapeutic uses, dried, whether or not powdered; extracts of glands or other organs or of their secretions for organo-therapeutic uses; heparin and its salts; other human or animal substances prepared for therapeutic or prophylactic uses, not elsewhere specified or included
Extracts of glands or other organs or of their secretions
Of human origin
Other
Other
Of human origin
Other
Heparin and its salts
Other
Human blood; animal blood prepared for therapeutic, prophylactic or diagnostic uses; antisera, other blood fractions and immunological products, whether or not modified or obtained by means of biotechnological processes; vaccines, toxins, cultures of micro-organisms (excluding yeasts) and similar products
Antisera, other blood fractions and immunological products, whether or not modified or obtained by means of biotechnological processes
Antisera
Other
Haemoglobin, blood globulins and serum globulins
Other
Vaccines for human medicine
Vaccines for veterinary medicine
Other
Human blood
Animal blood prepared for therapeutic, prophylactic or diagnostic uses
Cultures of micro-organisms
Pathogens and cultures of pathogens
Other
Other
Pathogens and cultures of pathogens
Other
Medicaments (excluding goods of heading|3002, 3005|or 3006) consisting of two or more constituents which have been mixed together for therapeutic or prophylactic uses, not put up in measured doses or in forms or packings for retail sale
Containing penicillins or derivatives thereof, with a penicillanic acid structure, or streptomycins or their derivatives
Containing other antibiotics
Containing hormones or other products of heading|2937|but not containing antibiotics
Containing insulin
Other
Containing alkaloids or derivatives thereof but not containing hormones or other products of heading|2937|or antibiotics
Containing ephedrine or its salts
Containing pseudoephedrine (INN) or its salts
Containing norephedrine or its salts
Other
Other
Medicaments (excluding goods of heading|3002, 3005|or 3006) consisting of mixed or unmixed products for therapeutic or prophylactic uses, put up in measured doses (including those in the form of transdermal administration systems) or in forms or packings for retail sale
Containing penicillins or derivatives thereof, with a penicillanic acid structure, or streptomycins or their derivatives
Containing other antibiotics
Containing hormones or other products of heading|2937|but not containing antibiotics
Containing insulin
Containing corticosteroid hormones, their derivatives or structural analogues
Other
Containing alkaloids or derivatives thereof but not containing hormones, other products of heading|2937|or antibiotics
Containing ephedrine or its salts
Containing pseudoephedrine (INN) or its salts
Containing norephedrine or its salts
Other
Other medicaments containing vitamins or other products of heading|2936
Other
Wadding, gauze, bandages and similar articles (for example, dressings, adhesive plasters, poultices), impregnated or coated with pharmaceutical substances or put up in forms or packings for retail sale for medical, surgical, dental or veterinary purposes
Adhesive dressings and other articles having an adhesive layer
Other
Wadding and articles of wadding
Other
Of textile materials
Gauze and articles of gauze
Other
Other
Pharmaceutical goods specified in note|4|to this chapter
Sterile surgical catgut, similar sterile suture materials (including sterile absorbable surgical or dental yarns) and sterile tissue adhesives for surgical wound closure; sterile laminaria and sterile laminaria tents; sterile absorbable surgical or dental haemostatics; sterile surgical or dental adhesion barriers, whether or not absorbable
Sterile surgical catgut
Sterile surgical or dental adhesion barriers, whether or not absorbable
Other
Blood-grouping reagents
Opacifying preparations for X-ray examinations; diagnostic reagents designed to be administered to the patient
Dental cements and other dental fillings; bone reconstruction cements
First-aid boxes and kits
Chemical contraceptive preparations based on hormones, on other products of heading|2937|or on spermicides
Gel preparations designed to be used in human or veterinary medicine as a lubricant for parts of the body for surgical operations or physical examinations or as a coupling agent between the body and medical instruments
Other
Appliances identifiable for ostomy use
Waste pharmaceuticals
FERTILISERS
Animal or vegetable fertilisers, whether or not mixed together or chemically treated; fertilisers produced by the mixing or chemical treatment of animal or vegetable products
Mineral or chemical fertilisers, nitrogenous
Urea, whether or not in aqueous solution
Urea containing more than 45|% by weight of nitrogen on the dry anhydrous product
Other
Ammonium sulphate; double salts and mixtures of ammonium sulphate and ammonium nitrate
Ammonium sulphate
Other
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight
Other
Ammonium nitrate, whether or not in aqueous solution
In aqueous solution
Other
Mixtures of ammonium nitrate with calcium carbonate or other inorganic non-fertilising substances
With a nitrogen content not exceeding 28|% by weight
With a nitrogen content exceeding 28|% by weight
Sodium nitrate
Natural Chilean sodium nitrate
Other
Natural sodium nitrate
Other
Double salts and mixtures of calcium nitrate and ammonium nitrate
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight
Other
Mixtures of urea and ammonium nitrate in aqueous or ammoniacal solution
Other, including mixtures not specified in the foregoing subheadings
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight
Other
Mineral or chemical fertilisers, phosphatic
Superphosphates
Containing more than 35|% by weight of diphosphorus pentaoxide
Other
Other
Mineral or chemical fertilisers, potassic
Potassium chloride
With a potassium content evaluated as K@2O, by weight, not exceeding 40|% on the dry anhydrous product
With a potassium content evaluated as K@2O, by weight, exceeding 40|% but not exceeding 62|% on the dry anhydrous product
With a potassium content evaluated as K@2O, by weight, exceeding 62|% on the dry anhydrous product
Potassium sulphate
Other
Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorus and potassium; other fertilisers; goods of this chapter in tablets or similar forms or in packages of a gross weight not exceeding 10|kg
Goods of this chapter in tablets or similar forms or in packages of a gross weight not exceeding 10|kg
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, with no phosphorus and no potassium content
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P₂O₅ and/or a potassium content evaluated as K₂O of less than 3% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@2O@5 and/or a potassium content evaluated as K@2O of 3% by weight or more but less than 6% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@2O@5 and/or a potassium content evaluated as K@2O of 6% by weight or more but less than 9% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@2O@5 and/or a potassium content evaluated as K@2O of 9% by weight or more but not exceeding 12% by weight
Other
Mineral or chemical fertilisers containing the three fertilising elements nitrogen, phosphorus and potassium
With a nitrogen content exceeding 10|% by weight on the dry anhydrous product
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@20@5 and a potassium content evaluated as K@2O of less than 3% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@2O@5 and a potassium content evaluated as K@2O of 3% by weight or more but less than 6% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@2O@5 and a potassium content evaluated as K@2O of 6% by weight or more but less than 9%
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@2O@5 and a potassium content evaluated as K@2O of 9% by weight or more but not exceeding 12% by weight
Other
Other
Diammonium hydrogenorthophosphate (diammonium phosphate)
Ammonium dihydrogenorthophosphate (monoammonium phosphate) and mixtures thereof with diammonium hydrogenorthophosphate (diammonium phosphate)
Other mineral or chemical fertilisers containing the two fertilising elements nitrogen and phosphorus
Containing nitrates and phosphates
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@2O@5 of less than 3% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@2O@5 of 3% by weight or more but less than 6% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@2O@5 of 6% by weight or more but less than 9% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@2O@5 of 9% by weight or more but not exceeding 10.40% by weight
Other
Other
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@2O@5 of less than 3% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P@2O@5 of 3% by weight or more but less than 6% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P2O5 of 6% by weight or more but less than 9% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a phosphorus content evaluated as P2O5 of 9% by weight or more but not exceeding 10.40% by weight
Other
Mineral or chemical fertilisers containing the two fertilising elements phosphorus and potassium
Other
With a nitrogen content exceeding 10|% by weight on the dry anhydrous product
Natural Chilean potassic sodium nitrate, consisting of a natural mixture of sodium nitrate and potassium nitrate (the proportion of potassium nitrate may be as high as 44|%), of a total nitrogen content not exceeding 16,3|% by weight on the dry anhydrous product
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a potassium content evaluated as K@2O of less than 3% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a potassium content evaluated as K@2O of 3% by weight or more but less than 6% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a potassium content evaluated as K@2O of 6% by weight or more but less than 9% by weight
Solid fertilisers with an ammonium nitrate content exceeding 80% by weight, and a potassium content evaluated as K@2O of 9% by weight or more but not exceeding 12% by weight
Other
Other
Natural Chilean potassic sodium nitrate, consisting of a natural mixture of sodium nitrate and potassium nitrate (the proportion of potassium nitrate may be as high as 44|%), of a total nitrogen content not exceeding 16,3|% by weight on the dry anhydrous product
Other
TANNING OR DYEING EXTRACTS; TANNINS AND THEIR DERIVATIVES; DYES, PIGMENTS AND OTHER COLOURING MATTER; PAINTS AND VARNISHES; PUTTY AND OTHER MASTICS; INKS
Tanning extracts of vegetable origin; tannins and their salts, ethers, esters and other derivatives
Quebracho extract
Wattle extract
Other
Sumach extract, vallonia extract, oak extract or chestnut extract
Other
Tanning extracts of eucalyptus
Tanning extracts derived from gambier and myrobalan fruits
other tanning extracts of vegetable origin
Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN. 85029-52-3)
Other
Synthetic organic tanning substances; inorganic tanning substances; tanning preparations, whether or not containing natural tanning substances; enzymatic preparations for pre-tanning
Synthetic organic tanning substances
Other
Reaction product of Acacia mearnsii extract, ammonium chloride and formaldehyde (CAS RN 85029-52-3)
Other
Colouring matter of vegetable or animal origin (including dyeing extracts but excluding animal black), whether or not chemically defined; preparations as specified in note|3|to this chapter based on colouring matter of vegetable or animal origin
Colouring matter of vegetable origin and preparations based thereon
Colouring matter of animal origin and preparations based thereon
Synthetic organic colouring matter, whether or not chemically defined; preparations as specified in note|3|to this chapter based on synthetic organic colouring matter; synthetic organic products of a kind used as fluorescent brightening agents or as luminophores, whether or not chemically defined
Synthetic organic colouring matter and preparations based thereon as specified in note|3|to this chapter
Disperse dyes and preparations based thereon
Colourant C.I. Disperse Blue 360|(CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360|content of 99|% or more by weight
Colourant C.I. Disperse Yellow 241|(CAS RN 83249-52-9) and preparations based thereon with a colourant C.I. Disperse Yellow 241|content of 97|% or more by weight
N-(2-chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine (CAS|RN|63741-10-6)
Preparation of dispersion dyes, containing: -|C.I. Disperse Orange 61, -|C.I. Disperse Blue 291:1, -|C.I. Disperse Violet 93:1, -|C.I. Disperse Red 54
Colourant C.I. Disperse Red 60|(CAS RN 17418-58-5) and preparations based thereon with a colourant C.I. Disperse Red 60|content of 50|% or more by weight
Colourant C.I. Disperse Blue 72|(CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72|content of 95|% or more by weight
Colourant C.I. Disperse Blue 359|(CAS RN 62570-50-7) and preparations based thereon with a colourant C.I. Disperse Blue 359|content of 50|% or more by weight
Colourant C.I. Disperse Red 343|(CAS RN 99035-78-6) and preparations based thereon with a colourant C.I. Disperse Red 343|content of 95|% or more by weight
Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight
Dye preparation, non-ionogenic, containing: -|N-[5-(acetylamino)-4-[(2-chloro-4,6-dinitrophenyl)azo]-2-methoxyphenyl]- 2-oxo-2-(phenylmethoxy)ethyl-β-alanine (CAS RN 159010-67-0) -|N-[4-[(2-cyano-4-nitrophenyl)azo]phenyl]-N-methyl-2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethyl-β-alanine (CAS RN 170222-39-6) and -|N-[2-chloro-4-[(4-nitrophenyl)azo]phenyl]-2-[2-(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)ethoxy]-2-oxoethyl-β-alanine (CAS RN 371921-34-5)
Other
Acid dyes, whether or not premetallised, and preparations based thereon; mordant dyes and preparations based thereon
Colourant C.I. Acid Blue 9|(CAS RN 2650-18-2) and preparations based thereon with a colourant C.I. Acid Blue 9|content of 50|% or more by weight
Dye preparation, anionic, containing by weight 75|% or more of disodium-7-((4-chloro-6-(dodecylamino)-1,3,5-triazin-2-yl)amino)-4-hydroxy-3-((4-((4-sulfophenyl)azo)phenyl)azo)-2-naphthalenesulfonate (CAS RN 145703-76-0)
Acid dye preparation, anionic, containing: -|lithium-amino-4-(4-tert-butylanilino)anthraquinone-2-sulfonate (CAS RN 125328-86-1), -|C.I. Acid Green 25|(CAS RN 4403-90-1) and -|C.I. Acid Blue 80|(CAS RN 4474-24-2)
Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182|(CAS RN 12219-26-0)
Colourant C.I. Acid Blue 80|(CAS RN 4474-24-2) and preparations based thereon with a colourant C.I. Acid Blue 80|content of 99|% or more by weight
Colourant|C.I.|Acid Red|52|(CAS RN 3520-42-1| ) and preparations based thereon with a colourant C.I.|Acid Red|52|content of 97|% or more by weight
Colourant C.I. Acid blue 25|(CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25|content of 80|% or more by weight
Other
Basic dyes and preparations based thereon
Colourant C.I. Basic Red 1|(CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1|content of 50|% or more by weight
(2,2'-(3,3'-Dioxidobiphenyl-4,4'-diyldiazo)bis(6-(4-(3-(diethylamino)propylamino)-6-(3-(diethylammonio)propylamino)-1,3,5-triazin-2-ylamino)-3-sulfonato-1-naphtholato))dicopper(II) acetate lactate (CAS|RN 159604-94-1)
Colourant C.I. Basic Blue 7|(CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7|content of 50|% or more by weight
Colourant C.I. Basic Violet 1|(CAS RN 603-47-4|or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1|content of 90|% or more by weight
Colourant C.I Basic Violet 11|(CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11|content of 90|% or more by weight
Colourant C.I Basic Red 1:1|(CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1|content of 90|% or more by weight
Other
Direct dyes and preparations based thereon
Colourant C.I. Direct Black 80|(CAS RN 8003-69-8)| and preparations based thereon with a colourant C.I.|Direct Black 80|content of 90|% or more by weight
Colourant C.I. Direct Blue 80|(CAS RN 12222-00-3) and preparations based thereon with a colourant C.I.|Direct Blue 80|content of 90|% or more by weight
C.I. Colourant Direct Red 23|(CAS RN 3441-14-3|) and preparations based thereon with a colourant C.I.|Direct Red 23|content of 90|% or more by weight
Other
Vat dyes (including those usable in that state as pigments) and preparations based thereon
Colourant C.I. Vat Orange 7|(C.I.Pigment Orange 43) (CAS RN 4424-06-0) and preparations based thereon with a colourant C.I. Vat Orange 7|(C.I.Pigment Orange 43) content of 20|% or more by weight
Colourant C.I. Vat Blue 4|(CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4|content of 50|% or more by weight
Colourant C.I. Vat Red 1|(CAS|RN|2379-74-0)
Other
Reactive dyes and preparations based thereon
Colourant Reactive Black 5|(CAS RN 17095-24-8) and preparations based thereon with a colourant Reactive Black 5|content of 60|% or more but not more than 75|% by weight, and including one or more of the following: -|Colourant Reactive Yellow 201|(CAS|RN|27624-67-5), -|1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or -|3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS|RN|906532-68-1)
Other
Pigments and preparations based thereon
Colourant C.I. Pigment Yellow 81|(CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81|content of 50|% or more by weight
Colourant C.I. Pigment Orange 64|(CAS RN 72102-84-2) and preparations based thereon with a Colourant C.I. colourant orange 64|content of 90|% or more by weight
Colourant C.I. Pigment Red 48:2|(CAS RN 7023-61-2)
Preparations based on colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60% or more by weight
Colourant C.I. Pigment Green 7|(CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7|content of 40|% or more by weight
Colourant C.I. Pigment Red 49:2|(CAS RN 1103-39-5) and preparations based thereon with a Colourant C.I. Pigment Red 49:2|content of 60|% or more by weight
Colourant C.I. Pigment Red 12|(CAS RN 6410-32-8) and preparations based thereon with a Colourant C.I. Pigment Red 12|content of 35|% or more by weight
Colourant C.I. Pigment Blue 15:3|(CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3|content of 35|% or more by weight
Colourant C.I. Pigment Brown 41|(CAS|RN|211502-16-8|or CAS|RN|68516-75-6)
Colourant C.I. Pigment Yellow 14|(CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14|content of 25|% or more by weight
Colourant C.I. Pigment Blue 15:4|(CAS|RN|147-14-8) and preparations based thereon, containing by weight 95|% or more of an organic dyestuff
Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a Colourant C.I. Pigment Red 4 content of 60% or more by weight
Colourant C.I. Pigment Blue 15:1|(CAS|RN|147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1|content of 35|% or more by weight
Colourant C.I. Pigment Red 202|(CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202|content of 70|% or more by weight
Colourant C.I. Pigment Yellow 120|(CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120|content of 50|% or more by weight
Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4), highly resinated pigment (approx. 35% disproportionate resin), with a purity of 98% by weight or more, in the form of extruded beads with a moisture content of not more than 1% by weight
Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50% or more by weight
Colourant C.I. Pigment Red 53:1|(CAS RN 5160-02-1) and preparations based thereon with a colourant C.I. Pigment Red 53:1|content of 50|% or more by weight
Colourant C.I. Pigment Red 53|(CAS RN 2092-56-0) and preparations based thereon with a colourant C.I. Pigment Red 53|content of 50|% or more by weight
Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) with a purity of 98 % by weight or more, in the form of extruded beads, with a moisture content of not more than 1 % by weight
Colourant C.I. Pigment Orange 5|(CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5|content of 80|% or more by weight
Colourant C.I. Pigment Red 207|(CAS RN 71819-77-7) and preparations based thereon with a colourant C.I. Pigment Red 207|content of 50|% or more by weight
Colourant C.I. Pigment Blue 61|(CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61|content of 35|% or more by weight
Colourant C.I. Pigment Violet 3|(CAS RN 1325-82-2|or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3|content of 90|% or more by weight
Other
Other, including mixtures of colouring matter of two or more of the subheadings|3204|11|to 3204|19
Colourant C.I. Solvent Violet 49|(CAS|RN|205057-15-4)
Red colourant preparation, in a form of wet paste, containing by weight: -|35|% or more but not more than 40|% of 1-[[4-(phenylazo)phenyl]azo]naphthalen-2-ol methyl derivatives (CAS RN 70879-65-1) -|not more than 3|% of 1-(phenylazo)naphthalen-2-ol (CAS RN 842-07-9) -|not more than 3|% of 1-[(2-methylphenyl)azo]naphthalen-2-ol (CAS RN 2646-17-5) -|55|% or more but not more than 65|% of water
Photochromic dye, 4-(3-(4-butoxyphenyl)-6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-11-(trifluoromethyl)-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-7-yl)morpholine (CAS RN 1021540-64-6)
Photochromic dye, bis(2-(4-(7-methoxy-3-(4-methoxyphenyl)-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenoxy)ethyl) decanedioate (CUS 0133724-2)
Photochromic dye, 4-(4-(13,13-dimethyl-3,11-diphenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl)morpholine (CUS 0133726-4)
Photochromic dye, 3-(4-butoxyphenyl)-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromene-11-carbonitrile (CUS 0133725-3)
Photochromic dye, 4, 4'-(7-methoxy-11-phenyl-13, 13-dipropyl-3, 13-dihydrobenzo[h]indeno[2, 1-f]chromene-3, 3-diyl)diphenol (CUS 0133728-6)
Photochromic dye, bis(2-{4-[11-cyano-3-(4-fluorophenyl)-6,7-dimethoxy-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl]phenoxy}ethyl) decanedioate (CUS 0133729-7)
Photochromic dye, 1-{4-(6-methoxy-3-(4-methoxyphenyl)-13,13-dimethyl-3, 13-dihydrobenzo[h]indeno[2,1-f]chromen-3-yl)phenyl}piperidine (CUS 0133727-5)
Colourant C.I. Solvent Red 49:2|(CAS RN 1103-39-5) and preparations based thereon with a colourant C.I. Solvent Red 49:2|content of 90|% or more by weight
Colourant C.I. Solvent Brown 53|(CAS RN 64696-98-6) and preparations based thereon with a colourant C.I. Solvent Brown 53|content of 95|% or more by weight
Colourant C.I. Solvent Blue 104|(CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104|content of 97|% or more by weight
Colourant C.I. Solvent Yellow 98|(CAS RN 27870-92-4|or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98|content of 95|% or more by weight
Colourant C.I. Solvent Blue 67|(CAS RN 12226-78-7) and preparations based thereon with a colourant C.I. Solvent Blue 67|content of 98|% or more by weight
Colourant C.I. Solvent Red HPR (CAS RN 75198-96-8) and preparations based thereon with a colourant C.I. Solvent Red HPR content of 95|% or more by weight
Other
Synthetic organic products of a kind used as fluorescent brightening agents
2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5)
Colourant C.I. Fluorescent Brightener 351|(CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351|content of 90|% or more by weight
Other
Other
Colourant C.I Solvent Yellow 172|(also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172|(also known as C.I. Solvent Yellow 135)| content of 90|% or more by weight
Other
Colour lakes; preparations as specified in note|3|to this chapter based on colour lakes
Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry
Dye C.I. Carbon Black 7|Lake
Other
Other colouring matter; preparations as specified in note|3|to this chapter, other than those of heading|3203, 3204|or 3205; inorganic products of a kind used as luminophores, whether or not chemically defined
Pigments and preparations based on titanium dioxide
Containing 80|% or more by weight of titanium dioxide calculated on the dry matter
Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5|% or more but not more than 2,5|% of isopropoxytitanium triisostearate
Other
Other
Preparation containing by weight: -|72|% (±|2|%) of mica (CAS RN 12001-26-2) and -|28|% (±|2|%) of titanium dioxide (CAS RN 13463-67-7)
Other
Pigments and preparations based on chromium compounds
Other colouring matter and other preparations
Ultramarine and preparations based thereon
Lithopone and other pigments and preparations based on zinc sulphide
Lithopone|(CAS RN 1345-05-7)
Other
Other
Magnetite
Other
Non aqueous dispersion, containing by weight:| -|57|% or more but not more than 63|% of aluminium oxide (CAS RN 1344-28-1) -|37|% or more but not more than 42|% of titanium dioxide (CAS RN13463-67-7), and -|1|% or more but not more than 2|% of triethoxycaprylyl silane (CAS RN 2943-75-1)
Colourant C.I. Pigment Blue 27|(CAS RN 14038-43-8)
Other
Inorganic products of a kind used as luminophores
Prepared pigments, prepared opacifiers and prepared colours, vitrifiable enamels and glazes, engobes (slips), liquid lustres and similar preparations, of a kind used in the ceramic, enamelling or glass industry; glass frit and other glass, in the form of powder, granules or flakes
Prepared pigments, prepared opacifiers, prepared colours and similar preparations
Vitrifiable enamels and glazes, engobes (slips) and similar preparations
Engobes (slips)
Other
Liquid lustres and similar preparations
Preparation containing : - not more than 85 |% by weight of silver, - not less than 2 |% by weight of palladium, - barium titanate, - terpineol, and - ethyl cellulose, used for screen printing in the manufacture of multilayer ceramic capacitors
Printing paste containing -|30|% by weight or more, but not more than 50|% of silver and -|8|% by weight or more, but not more than 17|% of palladium
Other
Glass frit and other glass, in the form of powder, granules or flakes
Glass in the form of flakes of a length of 0,1|mm or more but not exceeding 3,5|mm and of a thickness of 2|micrometres or more but not exceeding 5|micrometres; glass, in the form of powder or granules, containing by weight 99|% or more of silicon dioxide
Other
Glass flakes coated with silver, of an average diameter of 40|(±|10)|µm
Glass|flakes (CAS RN 65997-17-3): -|of a thickness of 0,3|µm or more but not more than 10|µm, and -|coated with titanium|dioxide (CAS RN 13463-67-7) or iron oxide (CAS RN 18282-10-5)
Other
Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a non-aqueous medium; solutions as defined in note|4|to this chapter
Based on polyesters
Solutions as defined in note|4|to this chapter
Thermoplastic polyester copolymer resin with a solid content of 30|% or more but not more than 50|%, in organic solvents
Other
Other
Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10|% of polymer
Other
Based on acrylic or vinyl polymers
Solutions as defined in note|4|to this chapter
Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34|% or more but not more than 40|% of copolymer
Immersion topcoat solution containing by weight|0,5|% or more but not more than 15|% of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether
Other
Other
Other
Solutions as defined in note|4|to this chapter
Polyurethane of 2,2′-(tert-butylimino)diethanol and 4,4′-methylenedicyclohexyl diisocyanate, in the form of a solution in N,N-dimethylacetamide, containing by weight 48|% or more of polymer
Copolymer of p-cresol and divinylbenzene, in the form of a solution in N,N-dimethylacetamide, containing by weight 48|% or more of polymer
Other
Copolymer of maleic acid and methyl vinyl ether, monoesterified with ethyl and/or isopropyl and/or butyl groups, in the form of a solution in ethanol, ethanol and butanol, isopropanol or isopropanol and butanol
Chlorinated polyolefins, in a solution
Preparation of 5|% or more but not more than 20|% by weight of propylene maleic anhydride copolymer or a blend of polypropylene and propylene maleic anhydride copolymer in an organic solvent
Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50|% (±|2|%) by weight
Silicones containing 50|% by weight or more of xylene of a kind used for the manufacture of long term surgical implants
Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5|% or more but not more than 11|% of polymer of methylsiloxane
Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate
Solution containing by weight: -|(65|±|10)|% of γ-butyrolactone, -|(30|±|10)|% of polyamide resin, -|(3,5|±|1,5)|% of naphthoquinone ester derivative and -|(1,5|±|0,5)|% of arylsilicic acid
Copolymer of hydroxystyrene with one or more of the following: •styrene •alkoxystyrene •alkylacrylates dissolved in ethyl lactate
Acenaphthalene copolymer in ethyl lactate solution
Other
Other
Based on synthetic polymers
Tetrafluoroethylene copolymer in butylacetate solution with a content of solvent of 50|% (±|2|%) by weight
Other
Based on chemically modified natural polymers
Solution based on chemically modified natural polymers, containing two or more of the following dyes: -|methyl 8'-acetoxy-1,3,3,5,6-pentamethyl-2,3-dihydrospiro[1H-indole-2,3'-naphtho[2,1-b][1,4]oxazine]-9'-carboxylate, -|methyl 6-(isobutyryloxy)-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate, -|13-isopropyl-3,3-bis(4-methoxyphenyl)-6,11-dimethyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol, -|ethoxycarbonylmethyl 8-methyl-2,2-diphenyl-2H-benzo[h]chromene-5-carboxylate, -|13-ethyl-3-[4-(morpholino)phenyl]-3-phenyl-3,13-dihydrobenzo[h]indeno[2,1-f]chromen-13-ol
Other
Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in an aqueous medium
Based on acrylic or vinyl polymers
Other
Other paints and varnishes (including enamels, lacquers and distempers); prepared water pigments of a kind used for finishing leather
Oil paints and varnishes (including enamels and lacquers)
Other
Prepared driers
Pigments (including metallic powders and flakes) dispersed in non-aqueous media, in liquid or paste form, of a kind used in the manufacture of paints (including enamels); stamping foils; dyes and other colouring matter put up in forms or packings for retail sale
Stamping foils
Metallised film: -|consisting of|eight or more layers of aluminium|(CAS RN 7429-90-5) of a purity|of 99,8|% or more, -|with an optical density of each aluminium layer of not more than 3.0, -|with each aluminium layer separated by a resin layer, -|on a carrier film of PET, and -|on rolls of up to 50|000|metres in length
Other
Other
Artists', students' or signboard painters' colours, modifying tints, amusement colours and the like, in tablets, tubes, jars, bottles, pans or in similar forms or packings
Colours in sets
Other
Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings; non-refractory surfacing preparations for façades, indoor walls, floors, ceilings or the like
Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings
Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics
Painters' fillings
Other
Printing ink, writing or drawing ink and other inks, whether or not concentrated or solid
Printing ink
Black
Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13|% of vinyl acrylate copolymer and colour pigments
Ink cartridges (without an integrated print head) for insertion into apparatus of subheadings 8443 31, 8443 32 or 8443 39, and incorporating mechanical or electrical components
Other
Other
Printing ink, liquid, consisting of a dispersion of a vinyl acrylate copolymer and colour pigments in isoparaffins, containing by weight not more than 13|% of vinyl acrylate copolymer and colour pigments
Ink: -|consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6)|in methyl propyl ketone (CAS RN 107-87-9), -|with a total solid content by weight of 55|% or more, but not more than 57|%, and -|with a specific gravity of 1,40|g/cm$3|or more, but not more than 1,60|g/cm$3, used to imprint electrodes
Ink cartridges (without an integrated print head) for insertion into apparatus of subheadings 8443 31, 8443 32 or 8443 39, and incorporating mechanical or electrical components
Other
Other
Ink formulation, for use in the manufacture of ink-jet cartridges
Heat sensitive ink fixed on a plastic film
Disposable cartridge ink, containing by weight: -|5|% or more, but not more than 10|% of amorphous silicon dioxide or -|3,8|% or more of dye C.I. Solvent Black 7|in organic solvents for use in the marking of integrated circuits
Dry ink powder|with a base of hybrid resin (made from polystyrene acrilyc resin|and polyester resin) mixed with: -|wax; -|a vinyl-based polymer and -|a colouring agent for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices
Ink cartridges (without an integrated print head) for insertion into apparatus of subheadings 8443 31, 8443 32 or 8443 39, and incorporating mechanical or electrical components; solid ink in engineered shapes for insertion into apparatus of subheadings 8443 31, 8443 32 or 8443 39
Other
ESSENTIAL OILS AND RESINOIDS; PERFUMERY, COSMETIC OR TOILET PREPARATIONS
Essential oils (terpeneless or not), including concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, in fixed oils, in waxes or the like, obtained by enfleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oils
Essential oils of citrus fruit
Of orange
Not deterpenated
Deterpenated
Of lemon
Not deterpenated
Deterpenated
Other
Not deterpenated
Deterpenated
Essential oils other than those of citrus fruit
Of peppermint (Mentha piperita)
Not deterpenated
Deterpenated
Of other mints
Not deterpenated
Deterpenated
Other
Of clove, niaouli and ylang-ylang
Not deterpenated
Deterpenated
Other
Not deterpenated
Deterpenated
Of geranium; of jasmin; of vetiver
Of lavender or of lavandin
Other
Resinoids
Other
Terpenic by-products of the deterpenation of essential oils
Extracted oleoresins
Of liquorice and hops
Other
Other
Mixtures of odoriferous substances and mixtures (including alcoholic solutions) with a basis of one or more of these substances, of a kind used as raw materials in industry; other preparations based on odoriferous substances, of a kind used for the manufacture of beverages
Of a kind used in the food or drink industries
Of a kind used in the drink industries
Preparations containing all flavouring agents characterising a beverage
Of an actual alcoholic strength by volume exceeding 0,5|%
Other
Containing no milkfats, sucrose, isoglucose, glucose or starch or containing, by weight, less than 1,5|% milkfat, 5|% sucrose or isoglucose, 5|% glucose or starch
Other
Containing 70|% or more by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
Other
Other
Of a kind used in the food industries
Other
Alcoholic solutions
Other
Perfumes and toilet waters
Perfumes
Toilet waters
Beauty or make-up preparations and preparations for the care of the skin (other than medicaments), including sunscreen or suntan preparations; manicure or pedicure preparations
Lip make-up preparations
Eye make-up preparations
Manicure or pedicure preparations
Other
Powders, whether or not compressed
Other
Preparations for use on the hair
Shampoos
Preparations for permanent waving or straightening
Hair lacquers
Other
Preparations for oral or dental hygiene, including denture fixative pastes and powders; yarn used to clean between the teeth (dental floss), in individual retail packages
Dentifrices
Yarn used to clean between the teeth (dental floss)
Other
Pre-shave, shaving or aftershave preparations, personal deodorants, bath preparations, depilatories and other perfumery, cosmetic or toilet preparations, not elsewhere specified or included; prepared room deodorisers, whether or not perfumed or having disinfectant properties
Pre-shave, shaving or aftershave preparations
Personal deodorants and antiperspirants
Perfumed bath salts and other bath preparations
Preparations for perfuming or deodorising rooms, including odoriferous preparations used during religious rites
'Agarbatti' and other odoriferous preparations which operate by burning
Other
Other
SOAP, ORGANIC SURFACE-ACTIVE AGENTS, WASHING PREPARATIONS, LUBRICATING PREPARATIONS, ARTIFICIAL WAXES, PREPARED WAXES, POLISHING OR SCOURING PREPARATIONS, CANDLES AND SIMILAR ARTICLES, MODELLING PASTES, 'DENTAL WAXES' AND DENTAL PREPARATIONS WITH A BASIS OF PLASTER
Soap; organic surface-active products and preparations for use as soap, in the form of bars, cakes, moulded pieces or shapes, whether or not containing soap; organic surface-active products and preparations for washing the skin, in the form of liquid or cream and put up for retail sale, whether or not containing soap; paper, wadding, felt and nonwovens, impregnated, coated or covered with soap or detergent
Soap and organic surface-active products and preparations, in the form of bars, cakes, moulded pieces or shapes, and paper, wadding, felt and nonwovens, impregnated, coated or covered with soap or detergent
For toilet use (including medicated products)
Other
Soap in other forms
Flakes, wafers, granules or powders
Other
Organic surface-active products and preparations for washing the skin, in the form of liquid or cream and put up for retail sale, whether or not containing soap
Organic surface-active agents (other than soap); surface-active preparations, washing preparations (including auxiliary washing preparations) and cleaning preparations, whether or not containing soap, other than those of heading|3401
Organic surface-active agents, whether or not put up for retail sale
Anionic
Aqueous solution containing by weight 30|% or more but not more than 50|% of disodium alkyl [oxydi(benzenesulphonate)]
Other
Sodium lauroyl methyl isethionate
Other
Cationic
Non-ionic
Vinyl copolymer surface active agent based on polypropylene glycol
Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated
Polyoxyethylated-12-hydroxystearic acid (CAS RN 70142-34-6)
Other
Other
Preparations put up for retail sale
Surface-active preparations
Washing preparations and cleaning preparations
Other
Surface-active preparations
Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides
Mixture of docusate sodium (INN) and sodium benzoate
Surface-active preparation, consisting of a mixture of sodium docusate and ethoxylated 2,4,7,9-tetramethyldec-5-yne-4,7-diol (CAS RN 577-11-7|and 9014-85-1)
Surface-active preparation, consisting of a mixture of polysiloxane and poly(ethylene glycol)
Surface-active preparation, containing 2-ethylhexyloxymethyl oxirane
Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1)
Other
Washing preparations and cleaning preparations
Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, anti-rust or anti-corrosion preparations and mould-release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70|% or more by weight of petroleum oils or of oils obtained from bituminous minerals
Containing petroleum oils or oils obtained from bituminous minerals
Preparations for the treatment of textile materials, leather, furskins or other materials
Other
Containing 70|% or more by weight of petroleum oils or of oils obtained from bituminous minerals but not as the basic constituent
Lubricants having a bio-based carbon content of at least 25|% by mass and which are biodegradable at a level of at least 60|%
Other
Other
Preparations for the treatment of textile materials, leather, furskins or other materials
Other
Cutting-fluid preparation based on an aqueous solution of synthetic polypeptides
Other
Artificial waxes and prepared waxes
Of poly(oxyethylene) (polyethylene glycol)
Other
Polishes and creams, for footwear, furniture, floors, coachwork, glass or metal, scouring pastes and powders and similar preparations (whether or not in the form of paper, wadding, felt, nonwovens, cellular plastics or cellular rubber, impregnated, coated or covered with such preparations), excluding waxes of heading|3404
Polishes, creams and similar preparations, for footwear or leather
Polishes, creams and similar preparations, for the maintenance of wooden furniture, floors or other woodwork
Polishes and similar preparations for coachwork, other than metal polishes
Scouring pastes and powders and other scouring preparations
Other
Metal polishes
Other
Candles, tapers and the like
Modelling pastes, including those put up for children's amusement; preparations known as 'dental wax' or as 'dental impression compounds', put up in sets, in packings for retail sale or in plates, horseshoe shapes, sticks or similar forms; other preparations for use in dentistry, with a basis of plaster (of calcined gypsum or calcium sulphate)
ALBUMINOIDAL SUBSTANCES; MODIFIED STARCHES; GLUES; ENZYMES
Casein, caseinates and other casein derivatives; casein glues
Casein
For the manufacture of regenerated textile fibres
For industrial uses other than the manufacture of foodstuffs or fodder
With a water content of more than 50% by weight
Other
Other
Other
Casein glues
Other
Albumins (including concentrates of two or more whey proteins, containing by weight more than 80|% whey proteins, calculated on the dry matter), albuminates and other albumin derivatives
Egg albumin
Dried
Unfit, or to be rendered unfit, for human consumption
Other
crystals
Other
Other
Unfit, or to be rendered unfit, for human consumption
Other
Milk albumin, including concentrates of two or more whey proteins
Unfit, or to be rendered unfit, for human consumption
Other
Dried (for example, in sheets, scales, flakes, powder)
Other
Other
Albumins, other than egg albumin and milk albumin (lactalbumin)
Unfit, or to be rendered unfit, for human consumption
Other
Albuminates and other albumin derivatives
Gelatin (including gelatin in rectangular (including square) sheets, whether or not surface-worked or coloured) and gelatin derivatives; isinglass; other glues of animal origin, excluding casein glues of heading|3501
Gelatin and derivatives thereof
Other
Peptones and their derivatives; other protein substances and their derivatives, not elsewhere specified or included; hide powder, whether or not chromed
Concentrated milk proteins specified in additional note|1|to this chapter
Other
Dextrins and other modified starches (for example, pregelatinised or esterified starches); glues based on starches, or on dextrins or other modified starches
Dextrins and other modified starches
Dextrins
Other modified starches
Starches, esterified or etherified
O-(2-Hydroxyethyl)-derivative of hydrolysed maize starch|(CAS RN 9005-27-0)
Other
Other
Glues
Containing, by weight, less than 25|% of starches or dextrins or other modified starches
Containing, by weight, 25|% or more but less than 55|% of starches or dextrins or other modified starches
Containing, by weight, 55|% or more but less than 80|% of starches or dextrins or other modified starches
Containing, by weight, 80|% or more of starches or dextrins or other modified starches
Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1|kg
Products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1|kg
Other
Adhesives based on polymers of headings|3901|to 3913|or on rubber
Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)
Two component microencapsulated epoxy adhesive dispersed in a solvent
Acrylic pressure sensitive adhesive with a thickness of 0,076|mm or more but not|more than|0,127|mm, put up in rolls of a width of 45,7|cm or more but not|more than 132|cm supplied on a release liner with an initial peel adhesion release value of not less than 15|N/25|mm (measured according to ASTM D3330)
Preparation containing by weight: -|34,5|% or more but not more than 60|% of styrene butadiene styrene copolymers, and -|rosin esters. Dissolved in: -|Methyl ethyl ketone (CAS RN 78-93-3), -|Heptane (CAS RN 142-82-5), and -|Toluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)
Optically clear free-film adhesives and optically clear curable liquid adhesives of a kind used solely or principally for the manufacture of flat panel displays or touch-sensitive screen panels
Other
Other
Enzymes; prepared enzymes not elsewhere specified or included
Rennet and concentrates thereof
Other
Lipoprotein lipase; aspergillus alkaline protease
Other
Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the manufacture of|human and analogue insulin products
Creatine amidinohydrolase (CAS RN 37340-58-2)
Other
EXPLOSIVES; PYROTECHNIC PRODUCTS; MATCHES; PYROPHORIC ALLOYS; CERTAIN COMBUSTIBLE PREPARATIONS
Propellent powders
Pyrotechnical powder in the form of granulate of cylindrical shape, composed of strontium nitrate or copper nitrate in the solution of nitroguanidine, binder and additives, used as a component of airbag inflators
Other
Prepared explosives, other than propellent powders
Safety fuses; detonating fuses; percussion or detonating caps; igniters; electric detonators
Safety fuses; detonating fuses
Other
Fireworks, signalling flares, rain rockets, fog signals and other pyrotechnic articles
Fireworks
Other
Matches, other than pyrotechnic articles of heading|3604
Ferro-cerium and other pyrophoric alloys in all forms; articles of combustible materials as specified in note|2|to this chapter
Liquid or liquefied-gas fuels in containers of a kind used for filling or refilling cigarette or similar lighters and of a capacity not exceeding 300|cm$3
Other
Ferro-cerium and other pyrophoric alloys in all forms
Other
PHOTOGRAPHIC OR CINEMATOGRAPHIC GOODS
Photographic plates and film in the flat, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in the flat, sensitised, unexposed, whether or not in packs
For X-ray
Instant print film
Other plates and film, with any side exceeding 255|mm
Photosensitive plate consisting of a photopolymer layer on a polyester foil of a total thickness of more than 0,43|mm but not more than 3,18|mm
Relief printing plate, of a kind used for printing on newsprint, consisting of a metal substrate coated with a photopolymer layer of a thickness of 0,15|mm or more but not more than 0,8|mm, not covered with a release film, of a total thickness of not more than 1|mm
Other
Other
For colour photography (polychrome)
Other
Plate of quartz or of glass, covered with a film of chromium and coated with a photosensitive or electron-sensitive resin, of a kind used for goods of heading 8541|or 8542
Other
Photographic film in rolls, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitised, unexposed
For X-ray
Other film, without perforations, of a width not exceeding 105|mm
For colour photography (polychrome)
Colour negative film:-|of a width of 75|mm or more but not exceeding 105|mm and-|of a length of 100|m or morefor the manufacture of instant-picture film-packs
Other
Other, with silver halide emulsion
Of a width not exceeding 35|mm
Microfilm; film for the graphic arts
Other
Of a width exceeding 35|mm
Other
Other film, without perforations, of a width exceeding 105|mm
Of a width exceeding 610|mm and of a length exceeding 200|m, for colour photography (polychrome)
Of a width exceeding 610|mm and of a length exceeding 200|m, other than for colour photography
Of a width exceeding 610|mm and of a length not exceeding 200|m
Of a width exceeding 105|mm but not exceeding 610|mm
Other film, for colour photography (polychrome)
Of a width not exceeding 16|mm
Of a width exceeding 16|mm but not exceeding 35|mm and of a length not exceeding 30|m, for slides
Of a width exceeding 16|mm but not exceeding 35|mm and of a length not exceeding 30|m, other than for slides
Of a width exceeding 16|mm but not exceeding 35|mm and of a length exceeding 30|m
Of a width exceeding 35|mm
Other
Of a width not exceeding 35|mm and of a length not exceeding 30|m
Microfilm; film for the graphic arts
Other
Of a width not exceeding 35|mm and of a length exceeding 30|m
Microfilm; film for the graphic arts
Other
Of a width exceeding 35|mm
Photographic paper, paperboard and textiles, sensitised, unexposed
In rolls of a width exceeding 610|mm
Other, for colour photography (polychrome)
Other
Photographic plates, film, paper, paperboard and textiles, exposed but not developed
Plates and film
Other
Photographic plates and film, exposed and developed, other than cinematographic film
For offset reproduction
Other
Microfilms
Other
Photomasks for photographically transferring circuit diagram patterns onto semiconductor wafers
Other
Cinematographic film, exposed and developed, whether or not incorporating soundtrack or consisting only of soundtrack
Of a width of 35|mm or more
Consisting only of soundtrack; negatives; intermediate positives
Other positives
Other
Consisting only of soundtrack; negatives; intermediate positives; newsreels
Other, of a width of
Less than 10|mm
10|mm or more
Chemical preparations for photographic uses (other than varnishes, glues, adhesives and similar preparations); unmixed products for photographic uses, put up in measured portions or put up for retail sale in a form ready for use
Sensitising emulsions
Photosensitive emulsion for the sensitization of silicon discs
Sensitising emulsion consisting of: -|by weight not more than 12|% of diazooxonapthtalenesulphonic acid ester -|phenolic resins in a solution containing at least 2-methoxy-1-methylethyl acetate or ethyl lactate or methyl 3-methoxypropionate or 2-heptanone
Sensitising emulsion containing: -|phenolic or acrylic resins -|a maximum 2|% by weight of light sensitive acid precursor, in a solution containing 2-methoxy-1-methylethyl acetate or ethyl lactate
Preparation based on photosensitive acrylic containing polymer, containing colour pigments, 2-methoxy-1-methylethylacetate and cyclohexanone and whether or not containing ethyl-3-ethoxypropionate
Sensitising emulsion or preparation containing one or more of: •acrylate polymers •methacrylate polymers •derivatives of styrene polymers containing by weight not more than 7% of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate
Sensitising emulsion, containing: -|not more than 10|% by weight of naphthoquinonediazide esters, -|2|% or more but not more than 35|% by weight of copolymers of hydroxystyrene -|not more than 7|% by weight of epoxy-containing derivatives dissolved in 1-ethoxy-2-propyl acetate and/or ethyl lactate
Photosensitive emulsion consisting of cyclized polyisoprene containing: -|55|% or more but not more than 75|% by weight of xylene and -|12|% or more but not more than 18|% by weight of ethylbenzene
Photosensitive emulsion containing by weight: -|20|% or more but not more than 45|% of copolymers of acrylates and/or|methacrylates and hydroxystyrene derivatives, -|25|% or more but not more than 50|% of organic solvent containing at least|ethyl lactate and/or propylene glycolmethylether acetate, -|5|% or more but not more than 30|% of acrylates, -|not more than 12|% of a photoinitiator
Dielectric coating, buffering mechanical stress, consisting of a|radically photopatternable polyamide-precursor with unsaturated carbon in the side-chains which is convertible into a polyimide, in form of a solution from N-methyl-2-pyrrolidone or N-ethyl-2-pyrrolidon with a polymer content by weight|10|% or more
Other
Other
Developers and fixers
Dry ink powder or toner blend, consisting of a copolymer of styrene and butyl acrylate and either magnetite or carbon black, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers
Dry ink powder or toner blend, based on a polyol resin, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers
Dry ink powder or toner blend, based on a polyester resin, manufactured by a polymerisation process, for use as a developer in the manufacture of cartridges for facsimile machines, computer printers or copiers
Dry ink powder or toner blend, consisting of:| -|styrene acrylate/butadiene copolymer -|either carbon black or an organic pigment -|whether or not containing polyolefin or amorphous silica| for use as a developer in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers
Thermoplastic or electrostatic toner cartridges (without moving parts) for insertion into apparatus of HS subheadings 8443 31, 8443 32 or 8443 39
Other
Other
Anti-reflection coating, consisting of a modified methacrylic polymer, containing by weight not more than 10|% of polymer, in a solution|in|two or three of the following substances: -|2-methoxy-1-methylethyl acetate (CAS RN 108-65-6) -|1-methoxypropan-2-ol (CAS RN 107-98-2) -|ethyl lactate (CAS RN 97-64-3)
Anti-reflection coating, in the form of an aqueous solution, containing by weight not more than: -|2|% of halogen-free alkyl sulphonic acid, and -|5|% of a fluorinated polymer
Anti-reflection coating, consisting of an ester based polymer modified with a chromophore group, in the form of a solution of either 2-methoxy-1-propanol, 2-methoxy-1-methylethyl acetate or methyl-2-hydroxyisobutyrate, containing by weight not more than 10|% of polymer
Sensitising emulsion or preparation containing one or more of: •acrylate polymers, •methacrylate polymers, •derivatives of styrene polymers, containing by weight not more than 7% of photosensitive acid precursors, dissolved in an organic solvent containing at least 2-methoxy-1-methylethyl acetate
Anti-reflection coating, consisting of either a siloxane polymer or an organic polymer having a phenolic hydroxy group modified with a chromophore group, in the form of a solution of an organic solvent containing either 1-ethoxy-2-propanol or 2-methoxy-1-methylethyl acetate containing by weight not more than 10|% of polymer
Rolls, containing: -|a dry layer of a photosensitive acrylic resin, -|on one side a poly(ethylene terephthalate) protecting foil and -|on the other side a polyethylene protecting foil
Other
MISCELLANEOUS CHEMICAL PRODUCTS
Artificial graphite; colloidal or semi-colloidal graphite; preparations based on graphite or other carbon in the form of pastes, blocks, plates or other semi-manufactures
Artificial graphite
Colloidal or semi-colloidal graphite
Colloidal graphite in suspension in oil; semi-colloidal graphite
Other
Carbonaceous pastes for electrodes and similar pastes for furnace linings
Other
Expandable graphite (CAS RN 90387-90-9|and CAS RN 12777-87-6)
Other
Activated carbon; activated natural mineral products; animal black, including spent animal black
Activated carbon
Mixture of activated carbon and polyethylene, in form of powder
Other
Other
Soda flux calcinated diatomaceous earth
Soda flux calcinated diatomaceous earth, acid washed, for use as a filter aid in the manufacture of pharmaceutical and/or biochemical products
Other
Other
Tall oil, whether or not refined
Crude
Other
Residual lyes from the manufacture of wood pulp, whether or not concentrated, desugared or chemically treated, including lignin sulphonates, but excluding tall oil of heading|3803
Sodium lignosulphonate
Other
Gum, wood or sulphate turpentine and other terpenic oils produced by the distillation or other treatment of coniferous woods; crude dipentene; sulphite turpentine and other crude para-cymene; pine oil containing alpha-terpineol as the main constituent
Gum, wood or sulphate turpentine oils
Gum turpentine
Wood turpentine
Sulphate turpentine
Other
Pine oil
Other
Rosin and resin acids, and derivatives thereof; rosin spirit and rosin oils; run gums
Rosin and resin acids
Obtained from fresh oleoresins
Rosin modified phenolic resin, -|containing 60|% or more but not more than 75|% by weight of rosin, -|with an acid value of not more than 25, of a kind used in offset printing
Other
Salts of rosin, of resin acids or of derivatives of rosin or resin acids, other than salts of rosin adducts
Ester gums
Other
Wood tar; wood tar oils; wood creosote; wood naphtha; vegetable pitch; brewers' pitch and similar preparations based on rosin, resin acids or on vegetable pitch
Wood tar
Other
Insecticides, rodenticides, fungicides, herbicides, anti-sprouting products and plant-growth regulators, disinfectants and similar products, put up in forms or packings for retail sale or as preparations or articles (for example, sulphur-treated bands, wicks and candles, and fly-papers)
Goods specified in subheading note|1|to this chapter
Other
Insecticides
Based on pyrethroids
Based on chlorinated hydrocarbons
Based on carbamates
Based on organophosphorus compounds
Other
Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide
Preparation containing endospores or spores and protein crystals derived from either: -|Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or, -|Bacillus thuringiensis subsp. kurstaki or, -|Bacillus thuringiensis subsp. israelensis or, -|Bacillus thuringiensis subsp. aizawai or, -|Bacillus thuringiensis subsp. tenebrionis
Spinosad (ISO)
Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3'-ethoxy-5,6-dihydro spinosyn J) and (3'-ethoxy- spinosyn L)
Other
Fungicides
Inorganic
Preparations based on copper compounds
Other
Other
Based on dithiocarbamates
Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500|kg or more
Other
Based on benzimidazoles
Based on diazoles or triazoles
Based on diazines or morpholines
Other
Fungicide in the form of a powder, containing by weight 65|% or more but not more than 75|% of hymexazole (ISO), not put up for retail sale
Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight: -|24|% or more but not more than 26|% of pyrithione zinc (INN), or -|39|% or more but not more than 41|% of pyrithione zinc (INN)
Preparation containing 38% or more but not more than 50% by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion
Preparations based on copper pyrithione (CAS RN 14915-37-8)
Other
Herbicides, anti-sprouting products and plant-growth regulators
Herbicides
Based on phenoxy-phytohormones
Based on triazines
Based on amides
Preparation based on a concentrate containing by weight 45|% or more but not more than 55|% of the active herbicidal ingredient Penoxsulam as an aqueous suspension
Other
Based on carbamates
Based on dinitroaniline derivatives
Based on derivatives of urea, of uracil or of sulphonylurea
Herbicide containing flazasulfuron (ISO) as an active ingredient
Other
Other
Preparation, consisting of a suspension of tepraloxydim (ISO), containing by weight: -|30|% or more of tepraloxydim (ISO) and -|not more than 70|% of a petroleum fraction consisting of aromatic hydrocarbons
Other
Anti-sprouting products
Plant-growth regulators
Preparation, in the form of granules, containing by weight: -|38,8|% or more but not more than 41,2|% of Gibberellin A3, or -|9,5|% or more but not more than 10,5|% of Gibberellin A4|and A7
Preparation consisting of benzyl(purin-6-yl)amine in a glycol|solution, containing by weight: -|1,88|% or more but not more than 2,00|%|of benzyl(purin-6-yl)amine of a kind used in plant growth regulators
Aqueous solution containing by weight: -|1,8|% of sodium para-nitrophenolate, -|1,2|% of sodium ortho-nitrophenolate, -|0,6|% of sodium 5-nitroguaiacolate for use in the manufacture of a plant growth regulator
Mixed white powder containing by weight: -|3|% or more but not more than 3,6|% of 1-methylcyclopropene with a purity more than 96|% and -|containing less than 0,05|% of each impurity of 1-chloro-2-methylpropene and 3-chloro-2-methylpropene for use in the manufacture of a growth regulator of post-harvest fruits, vegetables and ornamentals with a specific generator
Preparation in the form of powder, containing by weight: -|55|% or more of Gibberellin A4, -|1|% or more but not more than 35|% of Gibberellin A7, -|90|% or more of Gibberellin A4|and Gibberellin A7|combined -|not more than 10|% of a combination of water and other naturally occurring Gibberellins of a kind used in plant growth regulators
Other
Disinfectants
Based on quaternary ammonium salts
Based on halogenated compounds
Trichloroisocyanuric acid and preparations thereof, also referred to as ‘symclosene’ under the international non-propriatory name (INN)
Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6)|containing: -|1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5), -|1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5), -|1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and -|1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)
Other
Other
Other
Rodenticides
Other
Oxamyl (ISO) (CAS RN 23135-22-0)|in a solution of cyclohexanone and water
Abamectin|(ISO) (CAS RN 71751-41-2)
Other
Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or included
With a basis of amylaceous substances
Containing by weight less than 55|% of such substances
Containing by weight 55|% or more but less than 70|% of such substances
Containing by weight 70|% or more but less than 83|% of such substances
Containing by weight 83|% or more of such substances
Other
Of a kind used in the textile or like industries
Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ$5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ$5-dioxaphosphoran-5-ylmethyl) methylphosphonate
Other
Of a kind used in the paper or like industries
Defoamer, consisting of a mixture of oxydipropanol and 2,5,8,11-tetramethyldodec-6-yn-5,8-diol
Other
Of a kind used in the leather or like industries
Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rods
Pickling preparations for metal surfaces; soldering, brazing or welding powders and pastes consisting of metal and other materials
Soldering or welding paste, consisting of a mixture of metals and resin containing by weight: -|70|% or more, but not more than 90|% of tin -|not more than 10|% of one or more metals of silver, copper, bismuth, zinc, or indium for use in the electro technical industry
Other
Other
Preparations of a kind used as cores or coatings for welding electrodes and rods
Other
Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils
Anti-knock preparations
Based on lead compounds
Based on tetraethyl-lead
Other
Other
Solution of more than 61|% but not more than 63|% by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than: -|4,9|% of|1,2,4-trimethyl-benzene, -|4,9|% of naphthalene, and -|0,5|%|of|1,3,5-trimethyl-benzene
Other
Additives for lubricating oils
Containing petroleum oils or oils obtained from bituminous minerals
Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils
Dispersing agent containing : -|esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9), -|35|% or more but not more than 55|% by weight of mineral oils and -|with a chlorine content of not more than 0,05|% by weight, used in the manufacture of blends of additives for lubricating oils
Additives containing|: -|borated magnesium (C16-C24) alkylbenzene sulphonates and -|mineral oils, having a total base number| (TBN) of more than 250, but not more than 350,| for use in the manufacture of| lubricating oils
Dispersing agent|: -|containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9), -|containing|35|% or more but not more than 55|% by weight of mineral oils, -|with a chlorine content by weight of not more than|0,05|%,| -|having a total base number of less than|15, used in the manufacture of blends of additives for lubricating oils
Additives, consisting of : -|zinc bis[bis(tetrapropylenephenyl)] bis(hydrogen dithiophosphate) (CAS RN 11059-65-7), -|triphenyl thiophosphate (CAS RN 597-82-0), -|triphenyl phosphite (CAS RN 101-02-0), and -|mineral oils,| for use in|the manufacture of| lubricating oils
Detergent containing : -|Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol) -|40|% or more but not more than 60|% by weight of mineral oils and -|having a total base number more than 120 used in the manufacture of blends of additives for lubricating oils
Additives containing: -|mainly sulphurized diisobutylene, -|calcium sulphonate, -|dialkylaminoalkyl polyisobutylene succinate, and -|mineral oils, for use in the manufacture of| lubricating oils
Detergent containing : -|long chain alkyltoluene calcium| sulphonates, -|more than 30|% but not more than 50|% by weight of mineral oils, and -|having a total base number of more than 310|but not more| than 340, used in the manufacture of blends of additives for lubricating oils
Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil
Additives containing: -|a| (C8-18) alkyl polymethacrylate copolymer with| N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10,000|but not more than 20,000, and -|more than 15|% , but not more than 30|% by weight of mineral oils, for use in the manufacture of| lubricating oils
Additives containing: -|20|% or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 4-(4-nitrophenylazo)aniline and 3-nitroaniline, and -|mineral oils, for use in the manufacture of lubricating oils
Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process
Additives containing: -|calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and -|mineral oils, having a total base number (TBN) of more than 40|but not more than 100, for use in the manufacture of lubricating oils or|overbased detergents for use in lubricating oils
Additives containing: -|o-amino polyisobutylenephenol (CAS RN 78330-13-9), -|polyisobutylene succinimide (CAS RN 84605-20-9), -|alkenylimidazoline (CAS RN 68784-17-8), -|nonylated diphenylamine derivatives| (CAS RN 36878-20-3|and CAS RN 27177-41-9), and -|more than 30|% , but not more than 45|% by weight of mineral oils, for use in|the manufacture of| lubricating oils
Additives containing: -|a styrene-maleic anhydride copolymer esterified with C4-C20|alcohols, modified by| aminopropylmorpholine, and -|more than 50|% but not more than 75|% by weight of mineral oils, |for use in the|manufacture of lubricating oils
Additives containing: -|an| (C8-18) alkyl methacrylate| and| N-[3-(dimethylamino)propyl]methacrylamide copolymer, -|an ethylene-propylene copolymer , -|an ethylene-propylene copolymer chemically modified with succinic anhydride, 4-(4-nitrophenyl) aniline and 3-nitroaniline, and -|more than 15|% but not more than 30|% by weight of mineral oils, whether or not containing a methacrylic pour point depressant polymer, for use in|the manufacture of lubricating oils
Additives containing -|overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and -|by weight more than 25|% but not more than 50|% of mineral oils, having a|total base number|of more than 350, but not more than 450, for use in the manufacture of lubricating oils
Additives for lubricating oils, -|based on calcium C16-24|alkylbenzenesulphonates (CAS|RN|70024-69-0), -|containing mineral oils, used as a concentrated additive for the manufacture of engine oils through a blending process
Additives containing:| -|overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15|%|or more, but not more than 30|% and -|by weight more than 40|%|but not more than 60|% of mineral oil, having a total base number|of 280|or more but not more than 420,for use in the manufacture of lubricating oils
Additives containing: -|low base number calcium polypropylbenzenesulphonate|(CAS RN 75975-85-8) and -|by weight more than|40|% but not more than 60|% mineral oils, having a total base number|of| more than 10|but not more than 25, for use in the manufacture of lubricating oils
Additives containing: -|a polyisobutylene succinimide based mixture, and -|more than 40|% but not more than 50|% by weight of mineral oils, having a total base number of more than 40, for use in the manufacture of lubricating oils
Additives for lubricating oils, containing mineral oils, -|based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25|% or more but not more than 35|%, -|with a total base number (TBN) of 280|or more but not more than 320, used as a concentrated additive for the manufacture of engine oils through a blending process
Additives containing: -|an overbased mixture of calcium petroleum sulphonates (CAS RN|61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6|and CAS RN 70024-69-0)| with a total sulphonate content by weight of 15|% or more, but not more than 25|% and -|by weight more than 40|%|but not more than 60|% of mineral oils, having a total base number|of 280|or more but not more than 320, for use in the manufacture of lubricating oils
Additives containing: -|a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), and -|more than 35|% but not more than 50|% by weight of mineral oils, having a sulphur content of more than 0,7|% but not more than 1,3|% by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils
Additives for lubricating oils, -|containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), -|containing mineral oils, -|with a chlorine content by weight of 0,05|% or more but not more than 0,25|%, -|with a total base number (TBN) of more than 20, used as a concentrated additive for the manufacture of engine oils through a blending process
Additives containing: -|borated succinimide compounds (CAS RN 134758-95-5), -|mineral oils, and -|having a total base number (TBN) greater than 40, for use in the manufacture of additive mixtures|for lubricating oils
Additives containing: -|Calcium (C10-C14) dialkylbenzenesulfonates, -|more than 40|%, but not more than 60|% by weight of mineral oils, with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils
Antifoam additives consisting of: -|a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and -|more than 50|% but not more than 80|% by weight of mineral oils for use in the manufacture of| additive blends for lubricating oils
Additives containing : -|polyisobutylene aromatic polyamine succinimide, -|more than 40|% but not more than 60|% by weight of mineral oils, with a nitrogen content of more than 0,6|% but not more than 0,9|% by weight, for use in the manufacture of additive blends for lubricating oils
Additives containing: -|polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9), -|containing more than 31,9|% but not more than 43,3|% by weight of mineral oils, -|not more than 0,05|% by weight chlorine, and -|having a total base number (TBN) greater than 20, for use in the manufacture of additives blends for lubricating oils
Additives, -|containing more than 20|% but not more than 45|% by weight of mineral oils, -|based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated, of a kind used in the manufacture of blends of additives for lubricating oils
Other
Other
Additive containing : -|products from the reaction of branched heptyl phenol with formaldehyde, carbon disulphide and hydrazine (CAS RN 93925-00-9) and -|by weight more than 15|% but not more than 28|% of light aromatic petroleum naphtha solvent, for use in the manufacture of lubricating oils
Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14|alkyl chains, used as a concentrated additive for the manufacture of lubricating oils
Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils
Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process
Additives consisting of an imidazoline based |mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils
Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene| with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01|% or more but not more than| 0,5|%, used as a concentrated additive for the manufacture of lubricating oils
Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85|% by weight of the mixture, for use in the manufacture of lubricating oils
Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12|and 18|carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process
Additives consisting of reaction products of diphenylamine and branched nonenes with: -|by weight more than 28|% but not more than 35|%|4-monononyldiphenylamine, and -|by weight more than 50|% but not more than 65|% 4,4'-dinonyldiphenylamine, -|by weight a total|percentage of 2, 4-dinonyldiphenylamine and 2, 4'-dinonyldiphenylamine|of not more than 5|%, used for the manufacture of lubricating oils
Additives containing:| -|mainly sulphurized diisobutylene, -|calcium sulphonate, and -|dialkylaminoalkyl polyisobutylene succinate |for use in the manufacture of| lubricating oils
Additives consisting of a sulphurised mixture of vegetable oil, long chain α-olefins and tall oil fatty acids, with a sulphur content of 8|% or more but not more than 12|% by weight, for use in the manufacture of blends of additives for lubricating oils
Additives consisting of| dialkylphosphites| (in which the alkyl groups contain more than 80|% by weight of oleyl, palmityl and stearyl groups), for use in|the manufacture of lubricating oils
Additives containing : -|more than 70|%| by weight of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and -|more than 15|% by weight of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3), |for use in the manufacture of lubricating oils
Additives consisting of| a mixture of3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2),|for use in the| manufacture of lubricating oils
Other
Other
Dinonylnaphthylsulphonic acid salt, in a mineral oil solution
Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 20|% or more but not more than 29,9|% 2-ethylhexanol
Other
Prepared rubber accelerators; compound plasticisers for rubber or plastics, not elsewhere specified or included; anti-oxidising preparations and other compound stabilisers for rubber or plastics
Prepared rubber accelerators
Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7)
Mixture of bis [3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6)
Other
Compound plasticisers for rubber or plastics
Reaction mixture containing benzyl 3-isobutyryloxy-1-isopropyl-2,2-dimethylpropyl phthalate and benzyl 3-isobutyryloxy-2,2,4-trimethylpentyl phthalate
Other
Plasticizer, containing: -|bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2) -|more than 10|% but not more than 60|% by weight of dibutylterephthalate (CAS RN 1962-75-0)
Other
Anti-oxidising preparations and other compound stabilisers for rubber or plastics
Anti-oxidising preparations
Mixtures of oligomers of 1,2-dihydro-2,2,4-trimethylquinoline
Other
4,4'-Isopropylidenediphenol C12-15|alcohol phosphite containing by weight 1|% or more but not more than|3|% of |bisphenol A (CAS RN 96152-48-6)
Other
Other
Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate
UV|photo stabiliser containing: -|α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2); | -|α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1);| -|polyethylene glycol of a weight average molecular weight (Mw) of 300|(CAS RN 25322-68-3) -|bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), and -|methyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)
Compound stabilisers containing by weight 15|% or more but not more than 40|% of sodium perchlorate and not more than 70|% of 2-(2-methoxyethoxy)ethanol
Mixture containing by weight: -|25|% or more but not more than 50|% of a mixture of C15-18|tetramethylpiperidinyl esters (CAS RN|86403-32-9) -|not more than 20|% of other organic compounds -|on a carrier of polypropylene (CAS RN 9003-07-0)
Mixture of: -|80|% (±|10|%) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate, and -|20|% (±|10|%) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate
UV stabilizer, containing: -|2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS|RN|2725-22-6) and -|either N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS|RN|193098-40-7)|or -|N,N'-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-|dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS|RN|82451-48-7)
Light stabiliser, consisting of branched and linear alkyl esters of 3-(2H-Benzotriazolyl)-5-(1,1-di-methylethyl)-4-hydroxy-benzenepropanoic acid (CAS RN 127519-17-9)
Stabiliser for plastic material containing: -|2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS|RN|57583-35-4), -|2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS|RN|57583-34-3), and -|2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)
Light stabiliser containing: -|branched and linear alkyl esters of 3-(2H-benzotriazolyl)-5-(1,1-dimethylethyl)-4-hydroxybenzenepropanoic acid (CAS|RN|127519-17-9), and -|1-methoxy-2-propyl acetate (CAS RN 108-65-6)
UV-stabilizer, consisting of: -|a hindered amine: N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and -|either an o-hydroxyphenyl triazine UV light absorber or -|a chemically modified phenolic compound
Other
Preparations and charges for fire-extinguishers; charged fire-extinguishing grenades
Preparations and charges for fire-extinguishers, of mentioned in code 8424, for use in certain types of aircraft
Other
Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or varnish removers
Based on butyl acetate
Ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union), denatured or undenatured, excluding products with a water content of more than 0,3|% (m/m) measured according to the standard EN 15376, but including ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) contained in blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
Other
Mixture containing by weight: -|69|% or more but not more than 71|% of 1-methoxypropan-2-ol, -|29|% or more but not more than 31|% of 2-methoxy-1-methylethyl acetate
Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether
Ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union), denatured or undenatured, excluding products with a water content of more than 0,3|% (m/m) measured according to the standard EN 15376, but including ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) contained in blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Other
Reaction initiators, reaction accelerators and catalytic preparations, not elsewhere specified or included
Supported catalysts
With nickel or nickel compounds as the active substance
With precious metal or precious-metal compounds as the active substance
Catalyst, in the form of granules or rings of a diameter of 3|mm or more but not more than 10|mm, consisting of silver on an aluminium oxide support and containing by weight 8|% or more but not more than 40|% of silver
Other
Other
Catalyst in the form of grains of which 90|% or more by weight have a particle-size not exceeding 10|micrometres, consisting of a mixture of oxides on a magnesium-silicate support, containing by weight: -|20|% or more but not more than 35|% of copper and -|2|% or more but not more than 3|% of bismuth, and of an apparent specific gravity of 0,2|or more but not exceeding 1,0
Other
Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2cm3/g or more (as determined by the nitrogen absorption method)
Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20|% or more but not more than 40|% of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile
Catalyst, -|in the form of solid spheres, -|of a diameter of 4|mm or more but not more than 12|mm, and -|consisting of a mixture of molybdenum oxide and other metal oxides, supported on silicon dioxide and/or aluminium oxide, for use in the manufacture of acrylic acid
Catalyst in the form of spheres of a diameter of 4,2|mm or more but not|more than 9|mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde
Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene
Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide
Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide
Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide
Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil
Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder
Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins
Cathode, in rolls,|for air zinc button cell batteries (hearing aid batteries)
Other
Other
Catalyst consisting of ethyltriphenylphosphonium acetate in the form of a solution in methanol
Other
Initiator based on dimethylaminopropyl urea
Oxidation catalyst with an active ingredient of di[manganese (1+)], 1,2-bis(octahydro-4,7-dimethyl-1H-1,4,7-triazonine-1-yl-kN$1, kN$4, kN$7)ethane-di-μ-oxo-μ-(ethanoato-kO, kO')-, di[chloride(1-)], used to accelerate chemical oxidation or bleaching (CAS RN 1217890-37-3)
Catalyst, in powder form, consisting of a mixture of titanium trichloride and aluminium chloride, containing by weight: -|20|% or more but not more than 30|% of titanium and -|55|% or more but not more than 72|% of chlorine
Catalyst, consisting of a suspension in mineral oil of: -|tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride; and -|silicon dioxide -|containing 6,6|% (± 0,6|%) by weight of magnesium, and -|containing 2,3|% (± 0,2|%) by weight of titanium
Catalyst, consisting of a mixture of different alkylnaphthalene sulphonic acids, with aliphatic hydrocarbon chains, containing 12|- 56|carbon atoms
Catalyst: -|containing molybdenum oxide and other metal oxides in a silicon dioxide matrix, -|in the form of hollow cylindrical solids of a length of 4|mm or more but not more than 12|mm for use in the manufacture of acrylic acid
Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9|% or more but not more than 30|% of titanium
Catalyst, consisting of a mixture of (2-hydroxypropyl)trimethylammonium formate and dipropylene glycols
Catalyst, containing N-(2-hydroxypropylammonium)diazabicyclo (2,2,2) octane-2-ethyl hexanoate, dissolved in ethane-1,2-diol
Catalyst consisting of titanium dioxide and tungsten trioxide
Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol
Catalyst, containing by weight 69|% or more but not more than 79|% of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate
Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins
Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2|% or more but not more than 3|% of rare-earth metal oxides and less than 1|% of disodium oxide
Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis: -|4|% or more but not more than 10|% of titanium and -|10|% or more but not more than 20|% magnesium
Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile
Other
Refractory cements, mortars, concretes and similar compositions, other than products of heading|3801
Mixed alkylbenzenes and mixed alkylnaphthalenes, other than those of heading|2707|or 2902
Linear alkylbenzenes
Mixture of alkylbenzenes (C14-26) containing by weight: -|35|% or more but not more than 60|% of eicosylbenzene, -|25|% or more but not more than 50|% of docosylbenzene, -|5|% or more but not more than 25|% of tetracosylbenzene
Other
Other
Mixture of alkylnaphthalenes, containing by weight: -|88|% or more but not more than 98|% of hexadecylnaphthalene -|2|% or more but not more than 12|% of dihexadecylnaphthalene
Mixture of branched alkyl benzenes mainly containing dodecyl benzenes
Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12|to 56|carbon atoms
Other
Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronics
Doped silicon
Wafers of the type used in crystalline silicon photovoltaic modules or panels with a thickness of the wafers not exceeding 400 μm
Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)
Other
Other
Other
Hydraulic brake fluids and other prepared liquids for hydraulic transmission, not containing or containing less than 70|% by weight of petroleum oils or oils obtained from bituminous minerals
Based on silicate or phosphoric esters, for use in certain types of aircraft
Fire resistant hydraulic fluid based on phosphate ester
Other
Anti-freezing preparations and prepared de-icing fluids
Ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union), denatured or undenatured, excluding products with a water content of more than 0,3|% (m/m) measured according to the standard EN 15376
For use as fuel
For other uses
Other
Prepared culture media for the development or maintenance of micro-organisms (including viruses and the like) or of plant, human or animal cells
Diagnostic or laboratory reagents on a backing, prepared diagnostic or laboratory reagents whether or not on a backing, other than those of heading|3002|or 3006; certified reference materials
Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols
Industrial monocarboxylic fatty acids; acid oils from refining
Stearic acid
Of a kind used for animal feed
Other
Oleic acid
Of a kind used for animal feed
Other
Tall oil fatty acids
Of a kind used for animal feed
Other
Other
Distilled fatty acids
Of a kind used for animal feed
Other
Fatty acid distillate
Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content|80|% or more for use in the manufacture of
industrial monocarboxylic fatty acids of heading 3823, stearic acid of heading 3823, stearic acid of heading 2915, palmitic acid of heading 2915
animal feed preparations of subheading 2309
Other
Of a kind used for animal feed
Other
Other
Palm acid oils from refining for use in the manufacture of
industrial monocarboxylic fatty acids of heading 3823, stearic acid of heading 3823, stearic acid of heading 2915, palmitic acid of heading 2915
animal feed preparations of subheading 2309
Other
Of a kind used for animal feed
Other
Industrial fatty alcohols
Of a kind used for animal feed
Other
Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included
Prepared binders for foundry moulds or cores
Based on synthetic resins
Other
Non-agglomerated metal carbides mixed together or with metallic binders
Tungsten carbide simply mixed with metallic powder
Other
Prepared additives for cements, mortars or concretes
Non-refractory mortars and concretes
Concrete ready to pour
Other
Sorbitol other than that of subheading|2905|44
In aqueous solution
Containing 2|% or less by weight of D-mannitol, calculated on the D-glucitol content
Other
Other
Containing 2|% or less by weight of D-mannitol, calculated on the D-glucitol content
Other
Mixtures containing halogenated derivatives of methane, ethane or propane
Containing chlorofluorocarbons (CFCs), whether or not containing hydrochlorofluorocarbons (HCFCs), perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs)
Containing bromochlorodifluoromethane, bromotrifluoromethane or dibromotetrafluoroethanes
Containing hydrobromofluorocarbons (HBFCs)
Containing hydrochlorofluorocarbons (HCFCs), whether or not containing perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs), but not containing chlorofluorocarbons (CFCs)
Containing carbon tetrachloride
Containing 1,1,1-trichloroethane (methyl chloroform)
Containing bromomethane (methyl bromide) or bromochloromethane
Containing perfluorocarbons (PFCs) or hydrofluorocarbons (HFCs), but not containing chlorofluorocarbons (CFCs) or hydrochlorofluorocarbons (HCFCs)
Containing only 1,1,1-trifluoroethane and pentafluoroethane
Containing only 1,1,1-trifluoroethane, pentafluoroethane and 1,1,1,2-tetrafluoroethane
Containing only difluoromethane and pentafluoroethane
Containing only difluoromethane, pentafluoroethane and 1,1,1,2-tetrafluoroethane
Containing unsaturated hydrofluorocarbons
Other
Other
Mixtures and preparations containing oxirane (ethylene oxide), polybrominated biphenyls (PBBs), polychlorinated biphenyls (PCBs), polychlorinated terphenyls (PCTs) or tris(2,3-dibromopropyl) phosphate
Containing oxirane (ethylene oxide)
Containing polychlorinated biphenyls (PCBs), polychlorinated terphenyls (PCTs) or polybrominated biphenyls (PBBs)
Containing tris(2,3-dibromopropyl) phosphate
Other
Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts
Ion-exchangers
Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11|% of sodium evaluated as sodium oxide, in the form of rodlets
Other
Getters for vacuum tubes
Pyrolignites (for example, of calcium); crude calcium tartrate; crude calcium citrate
Naphthenic acids, their water-insoluble salts and their esters
Other
Anti-scaling and similar compounds
Preparations for electroplating
Mixtures of mono-, di- and tri-, fatty acid esters of glycerol (emulsifiers for fats)
Nicotine patches (transdermal systems), intended to assist smokers to stop smoking
Products and preparations for pharmaceutical or surgical uses
Intermediate products of the antibiotics manufacturing process obtained from the fermentation of Streptomyces tenebrarius, whether or not dried, for use in the manufacture of human medicaments of heading|3004
Intermediate products from the manufacture of monensin salts
Other
Auxiliary products for foundries (other than those of subheading|3824|10|00)
Fireproofing, waterproofing and similar protective preparations used in the building industry
Other
Lithium niobate wafer, undoped
Mixture of amines derived from dimerised fatty acids, of an average molecular weight of 520|or more but not exceeding 550
3-(1-Ethyl-1-methylpropyl)isoxazol-5-ylamine, in the form of a solution in toluene
Mixtures consisting mainly of (5-ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphinan-5-yl)methyl methyl methylphosphonate and bis[(5-ethyl-2-methyl-2-oxido-1,3,2-dioxaphosphinan-5-yl)methyl] methylphosphonate, and mixtures consisting mainly of dimethyl methylphosphonate, oxirane and diphosphorus pentaoxide
Chemical products or preparations, predominantly composed of organic compounds, not elsewhere specified or included
In the form of a liquid at 20|°C
Blends containing by weight more than 20|% of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Consigned from Canada
Other
Blends containing by weight 20|% or less of paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in Toluene
Aqueous solution containing by weight -|38|% or more but not more than 42|% of 2-(3-chloro-5-(trifluoromethyl)pyridin-2-yl)ethanamine (CAS RN 658066-44-5), -|21|% or more but not more than 25|% of sulphuric acid (CAS RN 7664-93-9) and -|1|% or more but not more than 2,9|% of methanol (CAS RN 67-56-1)
Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol
Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight|56|% or more but not more than 85|% of divinylbenzene (CAS RN 1321-74-0)
Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: -|on a support of mineral wax, whether or not modified chemically, or -|in the form of a solution in an organic solvent
Oligomer of tetrafluoroethylene, having one iodoethyl end-group
Preparations containing not less than 92|% but not more than 96,5|% by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate
Calcium phosphonate phenate, dissolved in mineral oil
Mixture of acetates of 3-butylene-1,2-diol with a content by weight of 65|% or more but not more than 90|%
Preparations containing not less than 47|% by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol
Preparation of |tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4)| in toluene
Preparation containing by weight: -|85|% or more but not more than 95|% of α-4-(2-cyano-2-butoxycarbonyl)vinyl-2-methoxy-phenyl-ω-hydroxyhexa(oxyethylene), and -|5|% or more but not more than 15|% of polyoxyethylene (20) sorbitan monopalmitate
Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors
Diethylmethoxyborane (CAS RN 7397-46-8) in the form of a solution in tetrahydrofuran
Preparation, containing: -|trioctylphosphine oxide (CAS RN 78-50-2), -|dioctylhexylphosphine oxide (CAS RN 31160-66-4), -|octyldihexylphosphine oxide|(CAS RN 31160-64-2) and -|trihexylphosphine oxide (CAS RN 3084-48-8)
Mixture of: -|3,3-bis(2-methyl-1-octyl-1H-indol-3-yl)phthalide (CAS RN 50292-95-0) and -|ethyl-6'-(diethylamino)-3-oxo-spiro-[isobenzofuran-1(3H),9'-[9H]xanthene]-2'-carboxylate (CAS RN 154306-60-2)
Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)
Alkyl carbonate-based preparation, also containing a UV absorber, for use in the manufacture of spectacle lenses
Mixture containing by weight 40|% or more but not more than 50|% of 2-hydroxyethyl methacrylate and 40|% or more but not more than 50|% of glycerol ester of boric acid
Preparations consisting predominantly of ethylene glycol and: -|either diethylene glycol, dodecandioic acid and ammonia water, -|or N,N-dimethylformamide, -|or γ-butyrolactone, -|or silicon oxide, -|or ammonium hydrogen azelate, -|or ammonium hydrogen azelate and silicon oxide, -|or dodecandioic acid, ammonia water and silicon oxide, for the manufacture of electrolytic capacitors
Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate]|with an average polymer chain length of less than 5|monomer units (CAS RN|813452-37-8)
Additives for paints and coatings, containing: -|a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and| copolymers of styrene-allyl alcohol| (CAS RN 84605-27-6), and -|30|% or more but not more than 35|% by weight of isobutyl alcohol
Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5|monomer units
Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5|monomer units
2-Hydroxybenzonitrile, in the form of a solution in N,N-dimethylformamide, containing by weight 45|% or more but not more than 55|% of 2-hydroxybenzonitrile
Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran
N2-[1-(S)-Ethoxycarbonyl-3-phenylpropyl]-N6-trifluoroacetyl-L-lysyl-N2-carboxy anhydride in a solution of dichloromethane at 37|%
3',4',5'-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80|% or more but not more than 90|% of 3',4',5'-trifluorobiphenyl-2-amine
Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate
Preparation containing by weight: -|89|% or more but not more than 98,9|% of 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]-nonitol -|0,1|% or more but not more than 1|% of colourants -|1|% or more but not more than 10|% of fluoropolymers
Mixture of primary tert-alkylamines
Ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union), denatured or undenatured, excluding products with a water content of more than 0,3|% (m/m) measured according to the standard EN 15376, but including ethyl alcohol produced from agricultural products (as listed in Annex I to the Treaty on the Functioning of the European Union) contained in blends with gasoline with an ethyl alcohol content of more than 10|% (v/v)
For use as fuel
For other uses
Preparation containing by weight: -|20|% (±1|%) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9), Dissolved in: -|10|% (± 5|%) 2-sec-Butylphenol (CAS RN 89-72-5) -|64|%( ±7|%) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and -|6|% (± 1.0|%) Naphthalene (CAS RN 91-20-3)
Preparation containing by weight: -|80|% or more but not more than 92|% of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5) -|7|% or more but not more than 20|% oligomers of Bisphenol-A phenol phosphate and -|not more than 1|% triphenyl phosphite (CAS RN 101-02-0)
Mixture of 80|% (±|10|%) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20|%|(±|10|%) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine
N-(2-phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7)
α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl]
C6-24|and C16-18-unsaturated fatty acid esters with sucrose (sucrose polysoyate)| (CAS|RN|93571-82-5)
Aqueous solution of polymers and ammonia consisting of: -|0,1|% or more but not more than 0,5|% by weight of ammonia (CAS RN 1336-21-6) and -|0,3|% or more but not more than 10|% by weight of polycarboxylate (linear polymers of acrylic acid)
Preparation containing: -|74|% or more but not more than 90|% by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4) and -|10|% or more but not more than 26|% by weight of toluene (CAS RN 108-88-3)
Preparation containing by weight: - 55% or more but not more than 78% of dimethyl gluterate - 10% or more but not more than 30% of dimethyl adipate and - not more than 35% of dimethyl succinate
Preparation containing by weight either 10|% or more but not more than 20|% of lithiumfluorophosphate or 5|% or more but not more than 10|% of lithium perchlorate in mixtures of organic solvents
Mixture of tertiary amines containing by weight: - 2.0-4.0% of N,N-dimethyl-1-octanamine - 94% minimum of N,N-dimethyl-1-decanamine - 2% maximum of N,N-dimethyl-1-dodecanamine
Diethylene glycol propylene glycol triethanolamine titanate complexes (CAS RN 68784-48-5) dissolved in diethylene glycol (CAS RN 111-46-6)
Preparation consisting of: -|50|% (±2|%) by weight of bis-alkoxylated ethyl acetoacetate aluminium chelates, -|in an ink oil (white mineral) solvent with a boiling point of 160|°C or more but not more than 180|°C
T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene
Preparation, consisting of two or more of the following glycols: -|dipropylene glycol -|tripropylene glycol -|tetrapropylene glycol or -|pentapropylene glycol
Preparation consisting by weight of 83|% or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7|% or more of tricyclopentadiene, and: -|either an aluminium-alkyl compound, -|or an organic complex of tungsten -|or an organic complex of molybdenum
Mixture of bis [3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6)
Liquid crystal mixture for use in the manufacture of displays
Acetophenone (CAS RN 98-86-2), with a purity by weight of 60|% or more but not more than 90|%
2,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated
Other
Other
Paraffin with a level of chlorination of|70|% or more
Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either: -|on a support of mineral wax, whether or not modified chemically, or -|in the form of a solution in an organic solvent
Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea
Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, having the following characteristics: - a resin acid content not exceeding 30|% by weight, - an acid number not exceeding 110 and - a melting point of 100!o!|C or more
Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5|% by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder
Liquid crystal mixture for use in the manufacture of displays
Mixture of phytosterols, not in the form of powder, containing by weight: -|75|% or more of sterols, -|not more than 25|% of stanols, for use in the manufacture of stanols/sterols or stanol/sterol esters
Mixture of phytosterols, in the form of powder, containing by weight: - 75% or more of sterols, - not more than 25% of stanols for use in the manufacture of stanols/sterols or stanol/sterol esters
Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1'-oxybis(2-chloroethane)
Oligomer of tetrafluoroethylene, having tetrafluoroiodoethyl end-groups
Mixture of phytosterols, in the form of flakes and balls, containing by weight 80|% or more of sterols and not more than 4|% of stanols
Powder mixture containing by weight: -|85|% or more of zinc diacrylate (CAS RN 14643-87-9) -|and not more than 5|% of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7)
Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material
Preparation containing: -|C,C'-azodi(formamide) (CAS RN 123-77-3), -|magnesium oxide (CAS RN 1309-48-4) and -|zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6) in which the gas formation from C,C'-azodi(formamide) occurs at 135|°C
Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges
Non halogenated Flame retardant containing by weight: -|50|% (± 2|%) Polyamide 6|(CAS|RN|25038-54-4), and -|50|% (± 2|%) red Phosphorus (CAS|RN|7723-14-0)
Mixture of phytosterols derived from wood and wood based oils (tall oil), in the form of powder, containing by weight: -|60|% or more, but not more than 80|% of sitosterols, -|not more than 15|% of campesterols, -|not more than 5|% of stigmasterols and -|not more than 15|% of betasitostanols
Other
Other
Calcined bauxite (refractory grade)
Structured silica alumina phosphate
Aqueous dispersion, containing| by weight: -|76|%| (±|0,5|%)|of silicon carbide (CAS RN|409-21-2) -|4,6|%|(±|0,05|%) of aluminium oxide|(CAS RN 1344-28-1)|and -|2,4|%|(±|0,05|%)|of|yttrium oxide|(CAS RN|1314-36-9)
Non halogenated Flame retardant containing by weight: -|50|% (± 2|%) Polyamide 6|(CAS|RN|25038-54-4), and -|50|% (± 2|%) red Phosphorus (CAS|RN|7723-14-0)
Mixture of: -|basic zirconium carbonate (CAS|RN|57219-64-4) and -|cerium carbonate (CAS|RN|537-01-9)
Manganese zinc ferrite granulate, containing by weight: -|52|% or more but not more than 56|% of iron(III)oxide, -|25|% or more but not more than 42|% of manganese(II) oxide and -|3,5|% or more but not more than 22|% of zinc oxide
Mixed metals oxides, in the form of powder, containing by weight: -|either 5|% or more of barium, neodymium or magnesium and 15|% or more of titanium, -|or 30|% or more of lead and 5|% or more of niobium, for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors
Zirconium oxide (ZrO@2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92|% or more but not more than 97|%
Nickel hydroxide, doped with 12|% or more but not more than 18|% by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators
Rare-earth concentrate containing by weight 60|% or more but not more than 95|% of rare-earth oxides and not more than 1|% each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5|% or more by weight
Carrier in|powder form, consisting of: -|ferrite (Iron oxide) (CAS RN 1309-37-1) -|manganese oxide (CAS RN 1344-43-0) -|magnesium oxide (CAS RN 1309-48-4) -|styrene acrylate copolymer |to be mixed with the toner powder, in the manufacturing of ink/toner filled |bottles or cartridges for |facsimile machines, computer printers and copiers
Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges
Fused magnesia containing by weight 15|% or more of dichromium trioxide
Catalyst containing by weight of -|52|%|(±|10|%) of cuprous oxide (CAS|RN|1317-39-1), -|38|%|(±|10|%) of cupric oxide (CAS|RN|1317-38-0) and -|10|% (±|5|%) of metallic copper (CAS|RN|7440-50-8)
Aluminium sodium silicate, in the form of spheres of a diameter of: -|either 1,6mm or more but not more than 3,4mm, -|or 4mm or more but not more than 6mm
Film containing oxides of barium or calcium combined with either oxides of titanium or zirconium, in an acrylic binding material
Reaction product, containing by weight: -|1|% or more but not more than 40|% of molybdenum oxide, -|10|% or more but not more than 50|% of nickel oxide, -|30|% or more but not more than 70|% of tungsten oxide
Hollow spheres of fused aluminosilicate containing 65-80|% amorphous aluminosilicate, with the following characteristics: -|a melting point of between 1|600|°C and 1|800|°C, -|a density of 0,6|- 0,8|g/cm$3, for use in the manufacture of particle filters in motor vehicles
Preparation, consisting of 2,4,7,9-tetramethyldec-5-yne-4,7-diol and silicon dioxide
Paste containing by weight: -|75|% or more, but not more than 85|% of copper, -|inorganic oxides, -|ethyl cellulose, and -|a solvent
Preparation containing: -|C,C'-azodi(formamide) (CAS RN 123-77-3), -|magnesium oxide (CAS RN 1309-48-4) and -|zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6) in which the gas formation from C,C'-azodi(formamide) occurs at 135|°C
Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight: -|0,1|% or more but not more than 1|% of platinum, and -|0,5|% or more but not more than 5|% of ethylaluminium dichloride (CAS RN 563-43-9)
Other
Residual products of the chemical or allied industries, not elsewhere specified or included; municipal waste; sewage sludge; other wastes specified in note|6|to this chapter
Municipal waste
Sewage sludge
Clinical waste
Waste organic solvents
Halogenated
Other
Wastes of metal-pickling liquors, hydraulic fluids, brake fluids and anti-freeze fluids
Other wastes from chemical or allied industries
Mainly containing organic constituents
Other
Other
Alkaline iron oxide for the purification of gas
Other
Biodiesel and mixtures thereof, not containing or containing less than 70|% by weight of petroleum oils or oils obtained from bituminous minerals
Fatty-acid mono-alkyl esters, containing by volume 96,5|% or more of esters (FAMAE)
Mixture of fatty acid methyl esters containing by weight at least: -|65|% or more but not more than 75|% of C12|FAME, -|21|% or more but not more than 28|% of C14|FAME, -|4|% or more but not more than 8|% of C16|FAME, for use in the manufacture of detergents and home and personal care products
Consigned from Canada
Other
Mixture of fatty acid methyl esters containing by weight at least: -|50|% or more but not more than 58|% of C8-FAME -|35|% or more but not more than 50|% of C10-FAME for use in the manufacture of agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents,|lamp oil and firelighter components
Consigned from Canada
Other
Mixture of fatty acid methyl esters containing by weight at least: -|15|% or more but not more than 32|% of C16|FAME -|65|% or more but not more than 85|% of C18|FAME for use in the manufacture of detergents and home and personal cleaning products, agricultural chemistry, (animal and human) food ingredients, additives to lubricant, solvents, lamp oil and firelighter components
Consigned from Canada
Other
Other
Consigned from Canada
Other
Other
Blends containing by weight more than 20|% of fatty-acid mono-alkyl esters or of a mixture of fatty-acid mono-alkyl esters and paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Consigned from Canada
Other
Blends containing by weight 20|% or less of fatty-acid mono-alkyl esters or of a mixture of fatty-acid mono-alkyl esters and paraffinic gasoil obtained from synthesis and/or hydro-treatment, of non-fossil origin
Other
PLASTICS AND ARTICLES THEREOF
I. PRIMARY FORMS
Polymers of ethylene, in primary forms
Polyethylene having a specific gravity of less than 0,94
Linear polyethylene
High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -|a melt flow rate (MFR 190|°C/2,16|kg) of 16g/10min or more, but not more than 24|g/10|min and -|a density (ASTM D 1505) of 0,922|g/cm$3|or more, but not more than 0,926|g/cm$3|and -|a vicat softening temperature of min. 94|°C
Linear low-density polyethylene|(LLDPE) (CAS|RN|9002-88-4) in the form of powder, with -|not more than 5|%|by weight of comonomer, -|a melt flow rate of 15|g/10|min or more, but not more than 60|g/10|min and -|a density of 0,922|g/cm$3|or more, but not more than 0,928|g/cm$3
Other
Other
Polyethylene, in the form of granules, of a specific gravity of 0,925|(±|0,0015), a melt flow index of 0,3|g/10|min (±|0,05|g/10|min), for the manufacture of blown films of a haze value not more than 6|% and an elongation at break (MD/TD) of 210/340
Polyethylene granules, containing by weight 10|% or more but not more than 25|% of copper
Other
Polyethylene having a specific gravity of 0,94|or more
Polyethylene in one of the forms mentioned in note|6(b) to this chapter, of a specific gravity of 0,958|or more at 23|°C, containing: -|50|mg/kg or less of aluminium, -|2|mg/kg or less of calcium, -|2|mg/kg or less of chromium, -|2|mg/kg or less of iron, -|2|mg/kg or less of nickel, -|2|mg/kg or less of titanium and -|8|mg/kg or less of vanadium, for the manufacture of chlorosulphonated polyethylene
Other
Polyethylene, in one of the forms mentioned in note 6|(b) to Chapter 39, of a specific gravity of 0,945|or more but not more than 0,985, for the manufacture of films for typewriter ribbon or similar ribbon
Polyethylene, containing by weight 35|% or more but not more than 45|% of mica
Other
Ethylene-vinyl acetate copolymers
For cavity filling, for use in certain types of aircraft
Other
Other
Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35|% or less of styrene, in one of the forms mentioned in note|6(b) to this chapter
Other
For cavity filling, for use in certain types of aircraft
Other
High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with -|a melt flow rate (MFR 190|°C/2,16|kg) of 16g/10min or more, but not more than 24|g/10|min and -|a density (ASTM D 1505) of 0,922|g/cm$3|or more, but not more than 0,926|g/cm$3|and -|a vicat softening temperature of min. 94|°C
Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with -|an acrylic acid content of 18,5|% or more but not more than 49,5|% by weight (ASTM D4094), and -|a melt flow rate of 14g/10|min (MFR 125|°C/2.16|kg, ASTM D1238) or more
Zinc or sodium salt of an ethylene and acrylic acid copolymer, with: -|an acrylic acid content of 6|% or more but not more than 50|% by weight, and -|a melt flow rate of 1g/10|min or more at 190|°C/2.16|kg (measured using ASTM D1238)
Octene linear low-density polyethylene (LLDPE) in the form of pellets used in the co-extrusion processing of films for flexible food packaging|with: -|10|% or more but not more than 20|% by weight of|octene,| -|a melt flow ratio of 9,0|or more, but not more than 10,0|(using ASTM D1238|10.0/2.16), -|a melt index (190°C/2.16|kg) of 0,4|g / 10|min or more but not more than 0,6|g / 10|min, -|a density (ASTM D4703) of 0,909|g/cm$3|or more, but not more than 0,913|g/cm$3, -|a gel area per 24,6|cm$3|of not more than 20|mm$2; and -|an anti-oxidant level not exceeding 240|ppm
Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method|in the form of pellets with: -|more than 10|% but not more than 20|% by weight of copolymer, -|a melt flow rate (MFR 190°C/2.16|kg) of 0.7|g / 10|min or more|but not more than 0.9|g / 10|min, and -|a density (ASTM D4703) of 0,911|g/cm$3|or more, but not more than 0,913|g/cm$3 for use in the co-extrusion processing of films for flexible food packaging
Linear low-density polyethylene|( LLDPE) (CAS RN 9002-88-4) in the form of powder, with -|more than 5|%, but not more than 8|% by weight of comonomer, -|a melt flow rate of 15|g/10|min or more, but not more than 60|g/10|min and -|a density of 0,922|g/cm$3|or more, but not more than 0,928|g/cm$3
Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11|% by weight|or more
Ethylene maleic anhydride copolymer, whether or not containing another olefin comonomer, with a melt flow rate of 1,3g/10|min or more at 190|°C/2,16|kg (measured using ASTM D1238)
Block copolymer of ethylene with octene in the form of pellets: -|with a specific gravity of 0,862|or more, but not more than 0,865, -|able to stretch to at least 200|% its original length, -|with a hysteresis of 50|%|(±10|%), -|with permanent deformation of not more than 20|%, for use in the manufacture of napkin liners for babies
Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid
Chlorosulphonated polyethylene
Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets
Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35|% of styrene
Chlorinated polyethylene, in the form of powder
Other
Polymers of propylene or of other olefins, in primary forms
Polypropylene
Polypropylene containing no plasticizer and not more than: -|7|mg/kg of aluminium, -|2|mg/kg of iron, -|1|mg/kg of magnesium, -|8|mg/kg of chloride
Polypropylene, containing no plasticiser, -|of a melting point of more than 150|°C (as determined by the ASTM D 3417|method), -|of a heat of fusion of 15|J/g or more but not more than 70|J/g, -|of an elongation at break of 1|000|% or more (as determined by the ASTM D 638|method), -|of a tensile modulus of 69|MPa or more but not more than 379|MPa (as determined by the ASTM D 638|method)
Polypropylene, containing not more than 1|mg/kg of aluminium, 0,05|mg/kg of iron, 1|mg/kg of magnesium and 1|mg/kg of chloride, for use in the manufacture of packaging for disposable contact lenses
Polypropylene, containing no plasticiser: -|of a tensile strength: of 32-60|MPa (as determined by the ASTM D638|method);| -|of a flexural strength of 50-90|MPa (as determined by the ASTM D790|method);| -|of a Melt Flow Rate (MFR)|at 230|°C/ 2,16|kg|of 5-15|g/10|min (as determined by the ASTM D1238|method);| -|with 40|% or more but not more than 80|% by weight of polypropylene, -|with 10|% or more but not more than 30|% by weight of glass fibre, -|with 10|% or more but not more than 30|% by weight of mica
High isotactic polypropylene (HIPP), whether or not coloured, intended for the manufacture of plastic components for air freshener with the following properties: -|a density of 0,880|g/cm$3|or more but not more than 0,913|g/cm$3(as determined by test method ASTM D1505), -|a tensile strength at yield of 350|kg/cm$2|or more but not more than 390|kg/cm$2|(as determined by test method ASTM D638) -|a heat deflection temperature of 135|°C or more under load of 0,45|MPa|(as determined by test method ASTM 648)
Other
Polyisobutylene
Polyisobutylene, of a number average molecular weight (M@n) of 700|or more but not more than 800
Hydrogenated polyisobutene, in liquid form
Other
Propylene copolymers
For cavity filling, for use in certain types of aircraft
Other
A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40|% or less of styrene, in one of the forms mentioned in note 6|(b) to Chapter 39
A-B-A block copolymer, consisting of: -|a copolymer of propylene and ethylene and -|21|% (± 3|%) by weight of polystyrene
Liquid ethylene-propylene-copolymer with: -|a flashpoint of 250|°C or more, -|a viscosity index of 150|or more, -|of a number average molecular weight (M@n) of 650|or more
Amorphous polyalpha olefin adhesive for the manufacture of hygiene products
Other
Other
A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35|% or less of styrene, in one of the forms mentioned in note|6(b) to this chapter
Polybut-1-ene, a copolymer of but-1-ene with ethylene containing by weight 10|% or less of ethylene, or a blend of polybut-1-ene with polyethylene and/or polypropylene containing by weight 10|% or less of polyethylene and/or 25|% or less of polypropylene, in one of the forms mentioned in note|6(b) to this chapter
Other
For cavity filling, for use in certain types of aircraft
Other
Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin
Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10|% or more but not more than 35|% of polystyrene
Non-hydrogenated 100|% aliphatic resin (polymer), with|the following characteristics: -|liquid at room temperature -|obtained by cationic polymerisation of C-5|alkenes monomers -|with a number average molecular weight (Mn) of 370|(±|50) -|with a weight average molecular weight (Mw) of 500|(±|100)
Polymers of 4-methylpent-1-ene
Chlorinated polyolefins, whether or not in a solution or dispersion
Synthetic poly-alpha-olefin with a viscosity at 100|° Celsius (measured according to method ASTM|D|445) ranging from 3|centistokes to 9|centistokes and obtained by polymerization of a mixture of dodecene and tetradecene, containing a maximum of 40|% of tetradecene
Other
Polymers of styrene, in primary forms
Polystyrene
Expansible
White expandable polystyrene beads with a thermal conductivity of not more than 0,034|W/mK at a density of 14,0|kg/m$3|(±|1,5|kg/m$3), containing 50|% recycled material
Other
Other
Crystalline polystyrene with: -|a melting point of 268|°C or more but not more than 272|°C -|a setting point of 232|°C or more but not more than 247|°C, -|whether or not containing additives and filling material
Other
Styrene-acrylonitrile (SAN) copolymers
Acrylonitrile-butadiene-styrene (ABS) copolymers
Other
Copolymer, solely of styrene with allyl alcohol, of an acetyl value of 175|or more
Brominated polystyrene, containing by weight 58|% or more but not more than 71|% of bromine, in one of the forms mentioned in note|6(b) to this chapter
Other
Butadiene-styrene copolymer pellets or granules, with: -|a specific gravity of 1,05|(±0,02), -|a melt flow index at 200|°C/5|kg of 13|g/10|min|(±1|g/10|min)
Copolymer in the form of granules containing by weight: -|78|± 4|% styrene, -|9|± 2|% n-butyl acrylate, -|11|± 3|% n-butyl methacrylate,, -|1.5|± 0,7|% methacrylic acid and -|0,01|% or more but not more than 2,5|% of polyolefinic wax
Copolymer in the form of granules containing by weight: -|83|± 3|% styrene, -|7|± 2|% n-butyl acrylate, -|9|± 2|% n-butyl methacrylate and -|0,01|% or more but not more than 1|% of polyolefinic wax
Copolymer in the form of granules containing by weight: -|82|± 6|% styrene, -|13,5|± 3|% n-butyl acrylate, -|1|± 0,5|% methacrylic acid and -|0,01|% or more but not more than 8,5|% of polyolefinic wax
Butadiene-styrene copolymer pellets or granules with a melting point of 85|°C|(±5|°C), containing by weight: -|2|% or more but not more than 4|% of|tris(tribromophenyl) triazine, -|5|% or more but not more than 10|% of ethane-1,2-bis(pentabromophenyl), -|3|% or more but not more than 5|% of antimony trioxide
Copolymer of _α_-methylstyrene and styrene, having a softening point exceeding 113|ºC
Copolymer of styrene with α-methylstyrene and acrylic acid, of a number average molecular weight (M@n) of 500|or more but not more than 6000
Preparation, in form of powder, containing by weight: -|86|% or more but not more than 90|% of styrene-acrylic-copolymer and -|9|% or more but not more than 11|% of fatty acid ethoxylate (CAS|RN|9004-81-3)
Copolymer in the form of granules containing by weight: -|74|%|(± 4|%) styrene, -|24|% (± 2|%) n-butylacrylate and -|0,01|% or more but not more than 2|% methacrylic acid
Preparation, in form of an aqueous suspension, containing by weight: -|25|% or more but not more than 26|% of styrene-acrylic-copolymer and -|5|% or more but not more than 6|% of glycol
Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (M@n) of not more than 4500, in flake or powder form
Copolymer of Styrene with 2, 5-Furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)
Copolymer in the form of granules containing by weight: -|75|% (± 7|%) styrene and -|25|% (± 7|%) methylmethacrylate
Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150|μm and a maximum diameter of 800|μm and containing by weight: -|minimum 65|% styrene, -|maximum 25|% divinylbenzene for use in the manufacture of ion exchange resins
Mixture containing by weight: -|45|% or more but not more than 65|% of polymers of styrene -|35|% or more but not more than 45|% of poly(phenylene ether) -|not more than 10|% of other additives and with one or more of the following special colour effects: -|metallic or pearlescent with a visual angular metamerism caused by at least 0,3|% flake-based pigment -|fluorescent, as characterized by emitting light during absorption of ultraviolet radiation -|bright white, as characterized by L*|not less than 92|and b* not more than 2|and a* between -5|and 7|on the|CIELab colour scale
Other
Polymers of vinyl chloride or of other halogenated olefins, in primary forms
Poly(vinyl chloride), not mixed with any other substances
In the form of granules, for use in certain types of aircraft
Poly(vinyl chloride) powder, not mixed with any other substances or containing any vinyl acetate monomers, with: -|a degree of polymerisation of 1|000|(±|300) monomer units, -|a coefficient of heat transmission (K-value) of 60|or more, but not more than 70, -|a volatile material content of less than 2,00|% by weight, -|a sieve non-passing fraction at a mesh width of 120|µm of not more than 1|% by weight,| for use in the manufacture of battery separators
Other
Other poly(vinyl chloride)
Non-plasticised
In the form of granules, for use in certain types of aircraft
Other
Plasticised
In the form of granules, for use in certain types of aircraft
Other
Vinyl chloride-vinyl acetate copolymers
Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: -|87|% or more but not more than 92|% of vinyl chloride, -|2|% or more but not more than 9|% of vinyl acetate and -|1|% or more but not more than 8|% of vinyl alcohol, in one of the forms mentioned in note 6|(a) or (b) to Chapter 39, for the manufacture of goods of headings|3215|or 8523|or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink
Other
Other vinyl chloride copolymers
For cavity filling, for use in certain types of aircraft
Other
Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight: -|87|% or more but not more than 92|% of vinyl chloride, -|2|% or more but not more than 9|% of vinyl acetate and -|1|% or more but not more than 8|% of vinyl alcohol, in one of the forms mentioned in note 6|(a) or (b) to Chapter 39, for the manufacture of goods of headings|3215|or 8523|or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink
Copolymer of vinyl chloride and methyl acrylate, containing by weight 80|%|(±|1|%) of vinyl chloride and 20|% (±|1|%) of methyl acrylate, in the form of a aqueous emulsion
Other
Vinylidene chloride polymers
Copolymer of vinylidene chloride with acrylonitrile, in the form of expansible beads of a diameter of 4|micrometres or more but not more than 20|micrometres
Other
For cavity filling, for use in certain types of aircraft
Other
Vinylidene-chloride methacrylate co-polymer for use in the manufacture of monofilaments
Other
Fluoropolymers
Polytetrafluoroethylene
Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2|% or more but not more than 4,6|% by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1|mg/kg of extractable fluoride ions
Polytetrafluoroethylene, in the form of powder, of a specific surface of 8|m$2/g or more but not more than 12|m$2/g, a particle size distribution of 10|% of less than 10|µm and 90|% of less than 35|µm and an average particle size of 20|µm
Other
Other
Poly(vinyl fluoride), in one of the forms mentioned in note|6(b) to this chapter
Fluoroelastomers FKM
Other
For cavity filling, for use in certain types of aircraft
Other
Poly(vinylidene fluoride) (CAS RN 24937-79-9)
Copolymer of ethylene with chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, in powder, whether or not with fillers
Copolymer of ethylene with chlorotrifluoroethylene, in one of the forms mentioned in note 6|(b) to Chapter 39
Copolymer of ethylene and tetrafluoroethylene
Polychlorotrifluoroethylene, in one of the forms mentioned in note 6|(a) and (b) to Chapter 39
Copolymer of chlorotrifluoroethylene and vinylidene difluoride
Other
Other
For cavity filling, for use in certain types of aircraft
Other
Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms
Poly(vinyl acetate)
In aqueous dispersion
Other
For cavity filling, for use in certain types of aircraft
Other
Vinyl acetate copolymers
In aqueous dispersion
Other
For cavity filling, for use in certain types of aircraft
Other
Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups
Viscous preparation, essentially consisting of poly(vinyl alcohol) (CAS RN 9002-89-5), an organic solvent and water for use as protective coating of wafers during the manufacturing of semiconductors
Other
Other
Copolymers
For cavity filling, for use in certain types of aircraft
Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing not more than 32|% by weight of |ethylene
Other
Other
Poly(vinyl formal), in one of the forms mentioned in note|6(b) to this chapter, of a molecular weight of 10|000|or more but not exceeding 40|000|and containing by weight: -|9,5|% or more but not more than 13|% of acetyl groups evaluated as vinyl acetate and -|5|% or more but not more than 6,5|% of hydroxy groups evaluated as vinyl alcohol
Other
For cavity filling, for use in certain types of aircraft
Other
Poly(vinyl butyral)(CAS RN 63148-65-2): — containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and — with a median particle size (D50) of more than 0,6 mm
Polymer of vinylpyrrolidone and dimethylaminoethyl methacrylate, containing by weight 97|% or more but not more than 99|% of vinylpyrrolidone, in the form of a solution in water
Hexadecylated or eicosylated polyvinylpyrrolidone
Polymer of vinyl formal, in one of the forms mentioned in note 6|(b) to Chapter 39, of a weight average molecular weight (M@w) of 25|000|or more but not more than 150|000|and containing by weight: -|9,5|% or more but not more than 13|% of acetyl groups evaluated as vinyl acetate and -|5|% or more but not more than 6,5|% of hydroxy groups evaluated as vinyl alcohol
Povidone (INN)-iodine|(CAS 25655-41-8)
Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78|% or more but not more than 82|% of triacontyl groups
Other
Acrylic polymers in primary forms
Poly(methyl methacrylate)
Other
Poly[N-(3-hydroxyimino-1,1-dimethylbutyl)acrylamide]
Copolymer of 2-diisopropylaminoethyl methacrylate with decyl methacrylate, in the form of a solution in N,N-dimethylacetamide, containing by weight 55|% or more of copolymer
Copolymer of acrylic acid with 2-ethylhexyl acrylate, containing by weight 10|% or more but not more than 11|% of 2-ethylhexyl acrylate
Copolymer of acrylonitrile with methyl acrylate, modified with polybutadiene-acrylonitrile (NBR)
Polymerisation product of acrylic acid with alkyl methacrylate and small quantities of other monomers, for use as a thickener in the manufacture of textile printing pastes
Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50|% or more of methyl acrylate, whether or not compounded with silica
Other
Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003|or 3004
Photosensitive resin consisting of modified acrylate, acrylic monomer, catalyst (photoinitiator) and stabilizer
Copolymer of|stearyl methacrylate, isooctyl acrylate and acrylic acid, dissolved in isopropyl palmitate
Copolymer of styrene with hydroxyethyl methacrylate and 2-ethylhexyl acrylate, of a number average molecular weight (M@n) of 500|or more but not more than 6|000
Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5|µm or more but not more than 10|µm
White powder of 1,2-ethanediol dimethacrylate-methyl methacrylate copolymer of a particle size of not more than 18|µm, insoluble in water
Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3|µm
Transparent acrylic polymer in packages of|not more than 1|kg, and not|for retail sale with: -|a viscosity of not more than 50|000|Pa.s at 120|°C as determined by the test method ASTM D 3835| -|a weight average molecular weight (Mw) of more than 500|000|but not more than 1|200|000|according to the Gel Permeation Chromatography (GPC) test, -|a residual monomer content of less then 1|%
Poly(alkyl acrylate) with an ester alkyl chain of C10|to|C30
Acrylonitrile-butadiene-styrene-methylmethacrylate copolymer pellets with: -|a melting point of 96|°C|(±3|°C), -|a specific gravity|of 1,03|or more but not more than 1,07, and containing by weight: -|25|% or more but not more than 50|% of acrylonitrile-butadiene-styrene, and -|50|% or more but not more than 75|% of methylmethacrylate
Polymers of esters of acrylic acid with one or more of the following monomers in the chain: -|chloromethyl vinyl ether, -|chloroethyl vinyl ether, -|chloromethylstyrene, -|vinyl chloroacetate, -|methacrylic acid, -|butenedioic acid monobutyl ester, containing by weight not more than 5|% of each of the monomeric units, in one of the forms mentioned in note 6|(b) to Chapter 39
Polyalkylacrylate, chemically modified with cobalt, with a melting temperature (Tm) of 65|°C|(±|5|°C), measured with Differential Scanning Calorimetry (DSC)
Preparation containing by weight: -|33|% or more but not more than 37|% of|butyl methacrylate - methacrylic acid copolymer, -|24|% or more but not more than 28|% of propylene glycol, and -|37|% or more but not more than 41|% of water
Polydimethylsiloxane-graft-(polyacrylates; polymethacrylates)
Aqueous solution of polymers and ammonia consisting of: -|0,1|% or more but not more than 0,5|% by weight of ammonia (CAS RN 1336-21-6) and -|0,3|% or more but not more than 10|% by weight of polycarboxylate (linear polymers of acrylic acid)
Other
Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms
Polyacetals
Mixture of a trioxan-oxirane-copolymer and polytetrafluoroethylene
Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine
Other
Other polyethers
Polyether alcohols
Polyethylene glycols
Poly(ethylene oxide) of a number average molecular weight (M@n) of 100|000|or more
Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (M@n) of 40|000
[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-hydroxypoly(oxo-1,2-ethanediyl) (CAS|RN|104810-48-2)
Preparation containing: -|α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS|RN|104810-48-2)|and -|α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly(oxy-1,2-ethanediyl) (CAS|RN|104810-47-1)
Other
Other
Polytetramethylene|ether glycol|with a|weight average molecular weight (Mw) of 2|700|or more but not more than 3|100|(CAS RN 25190-06-1)
Mixture, containing by weight 70|% or more but not more than 80|% of a polymer of glycerol and 1,2-epoxypropane and 20|% or more but not more than 30|% of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone
Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (M@n) of 3|500|(±|100)
Poly(p-phenylene oxide) in the form of powder -|with a glasstransitiontemperature of 210|°C -|with a weight average molecular weight (Mw) of 35|000|or ore but not more than 80|000 -|with an inherent viscosity of 0,2|or more but not more than 0,6|dl/gram
Other
Other
Copolymer of 1-chloro-2,3-epoxypropane with ethylene oxide
Other
Poly(oxypropylene) having alkoxysilyl end-groups
Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)
Polyethylene glycol chemically modified with an isocyanate group containing a carbodiimide group, in the form of a solution in 2-methoxy-1-methylethyl acetate
Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups
Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient
Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5|000
Polytetramethylene oxide di-p-aminobenzoate
L-Lysine N-hydroxysuccinimidyl ester .alpha.,.epsilon.-bis(polyethylene glycol monomethylether carbamate) (CAS RN 266318-38-1) of a number average molecular weight (Mn) of 38|000|or more but not more than 40|000
α-[3-(3-Maleimido-1-oxopropyl)amino]propyl-ω-methoxy, polyoxyethylene (CAS|RN|883993-35-9)
Poly(p-phenylene oxide) in the form of powder -|with a glasstransitiontemperature of 210|°C -|with a weight average molecular weight (Mw) of 35|000|or ore but not more than 80|000 -|with an inherent viscosity of 0,2|or more but not more than 0,6|dl/gram
Other
Epoxide resins
Epoxide resin, halogen-free, -|containing by weight|more than 2|% phosphoros calculated on the solid content, chemically bound in the epoxide resin, -|not containing any hydrolysable chloride or containing less than 300|ppm hydrolysable chloride, and -|containing solvents for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits
Epoxide resin -containing by weight 21% or more of brome, -not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and -containing solvents
Epoxide resin, containing by weight 70|% or more of silicon dioxide, for the encapsulation of goods of headings|8533, 8535, 8536, 8541, 8542|or 8548
Liquid epoxide resin of 2-propenenitrile/1,3-butadiene-epoxide copolymer, not containing any solvent, with: -|a zinc borate hydrate content of not more than 40|% by weight, -|a diantimony trioxide content of not more than 5|% by weight
Polyglycerol polyglycidyl ether resin (CAS RN 118549-88-5)
Other
Polycarbonates
Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of 98.5|% or more, in the form of pellets or granules, with a luminous transmittance of 88.5% or more, measured using a test sample with a thickness of 4|mm at a wavelength of λ = 400 nm (according to ISO 13468-2)
α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)
Polycarbonate of phosgene and| bisphenol A: -|containing by weight 12|% or more but not more than 26|% of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol, -|with p-cumylphenol endcaps, and -|with a weight average molecular weight (Mw) of 29|900|or more but not more than 31|900
Polycarbonate of carbonic dichloride, 4,4'-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4'-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps
Other
Alkyd resins
Poly(ethylene terephthalate)
Having a viscosity number of 78|ml/g or higher
Other
Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol
Poly(ethylene terephthalate) pellets or granules: -|with a specific gravity of 1,23|or more but not more than 1,27|at 23°|C, and -|containing not more than 10|% by weight of other modifiers|or additives
Flexible packages (for oxygen sensitive polymers) manufactured from a laminate of: -|not more than 75|µm of polyethylene, -|not more than 50|µm of polyamide, -|not more than 15|µm of polyethylene terephthalate and -|not more than 9|µm of aluminium with a tensile strength of more than 70|N/15|mm and oxygen transmission rate of less than 0,1|cm$3/m$2/24|hrs at 0,1|MPa
Oxygen binding copolymer (as determined by the ASTM|D|1434|and|3985|methods), obtained from benzenedicarboxylic acids, ethylene glycol and polybutadiene substituted by hydroxy groups
Other
Poly(lactic acid)
Other polyesters
Unsaturated
Liquid
Other
Diallyl phthalate prepolymer, in|powder form
Other
Other
Poly(ethylene naphthalene-2,6-dicarboxylate)
Other
Poly(oxy-1,4-phenylenecarbonyl)|(CAS RN 26099-71-8), in the form of powder
Liquid crystal copolyester with a melting point of not less than 270|ºC, whether or not containing fillers
Copolymer, containing 72|% by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol
Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)
Polycarbonate of phosgene, bisphenol A, resorcinol, isophthaloyl chloride, terephthaloyl chloride andpolysiloxane, with p-cumylphenolendcaps, and a weight average molecular weight (Mw) of 24|100|or more but not more than 25|900
Copolymer of terephthalic acid and isophthalic acid with bisphenol A
Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10|% by weight of cyclohexane dimethanol
Copolymer, consisting of 72|% by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles
Thermoplastic liquid crystal aromatic polyester copolymers
Other
Polyamides in primary forms
Polyamide-6, -11, -12, -6,6, -6,9, -6,10|or -6,12
Other
Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6|(b) to Chapter 39
Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine
1,4-Benzenedicarboxylic acid polymer with 2-methyl-1,8-octanediamine and 1,9-nonanediamine in powder form (CAS RN 169284-22-4)
Copolymer consisting of: -|hexanedioic acid -|12-aminododecanoic acid -|hexahydro-2H-azepin-2-one, and -|1,6-hexanediamine
Copolymer containing: -|1,3-benzenedimethanamine (CAS RN 1477-55-0) and -|adipic acid (CAS RN 124-04-9) whether or not containing isophthalic acid (CAS RN 121-91-5)
Other
Amino-resins, phenolic resins and polyurethanes, in primary forms
Urea resins; thiourea resins
Melamine resins
Other amino-resins
Phenolic resins
Polycondensation product of phenol with formaldehyde, in the form of hollow spheres of a diameter of less than 150|µm
Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices
Mixture of: -|alkylphenol|- formaldehyde resin, whether or not brominated,|and -|zinc|oxide
Polymer in powder form with a content of: -|phenolic resin polymer (CAS|RN|9003-35-4) with 80|% by weight or more but not more than 90|% -|phenol (CAS|RN|108-95-2) with not more than 5|% and -|hexamethylenetetramine (CAS|RN|100-97-0) with 5|% by weight or more but not more than 15|%
Rosin modified phenolic resin, -|containing 60|% or more but not more than 75|% by weight of rosin, -|with an acid value of not more than 25, of a kind used in offset printing
Other
Polyurethanes
Polyurethane of 2,2′-(tert-butylimino)diethanol and 4,4′-methylenedicyclohexyl diisocyanate, in the form of a solution in N,N-dimethylacetamide, containing by weight 50|% or more of polymer
Other
UV curable water soluble liquid photopolymer consisting of a mixture by weight of -|60|% or more of two-functional acrylated polyurethane oligomers and -|30|% (±|8|%) of mono-functional and tri-functional (metha)|acrylates, and -|10|% (±|3|%) of hydroxyl functionalized mono-functional (metha)|acrylates
Preparation containing by weight: -|14|% or more but not more than 18|% of ethoxylated polyurethane| modified with hydrophobic groups, -|3|%|or more but not more than 5|% of enzymatically modified starch, and -|77|% or more but not more than 83|% of water
Preparation containing by weight: -|16|% or more but not more than 20|% of ethoxylated polyurethane modified with hydrophobic groups, -|19|% or more but not more than 23|% of diethylene glycol butyl ether, and -|60|% or more but not more than 64|% of water
Preparation containing by weight: -|34|% or more but not more than 36|% of ethoxylated|polyurethane modified with hydrophobic groups, -|37|% or more but not more than 39|% of propylene glycol, and -|26|% or more but not more than 28|% of water
Other
Silicones in primary forms
Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated
Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]
Polydimethylsiloxane with a degree of polymerisation of 2800 monomer units (+/- 100)
Silicones|of a kind|used in the manufacture of long term surgical implants
Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum
Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups
Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices
Monomethacryloxypropylterminated poly(dimethylsiloxane)
Other
Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in note|3|to this chapter, not elsewhere specified or included, in primary forms
Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes
For cavity filling, for use in certain types of aircraft
Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75|% by weight C-5|to C-12|cycloaliphatic alkenes and more than 10|% but not more than 25|% by weight aromatic alkenes yielding a hydrocarbon resin with: -|an iodine value of more than 120|and -|a Gardner Colour of more than 10|for the pure product or -|a Gardner Colour of more than 8|for a 50|% solution by weight in toluene (as determined by the ASTM method D6166)
Other
Other
Condensation or rearrangement polymerisation products whether or not chemically modified
Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene), in one of the forms mentioned in note|6(b) to this chapter
Poly(thio-1,4-phenylene)
Other
Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4'-biphenylene)
Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide
m- Xylene formaldehyde resin
Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form
Formaldehyde, polymer with 1,3-dimethylbenzene and tert-butyl-phenol (CAS|RN|60806-48-6)
Preparation, containing: -|Cyanic acid, C,C'-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1), -|1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0), -|in a solution of butanone|(CAS RN 78-93-3) with a content of less than| 50|% by weight
Other
Other
Copolymer of p-cresol and divinylbenzene, in the form of a solution in N,N-dimethylacetamide containing by weight 50|% or more of polymer; hydrogenated copolymers of vinyltoluene and α-methylstyrene
Other
For cavity filling, for use in certain types of aircraft
Other
Copolymer of vinyltoluene and α-methylstyrene
1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene,|hydrogenated
Alternated copolymer of ethylene and maleic anhydride (EMA)
Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9|% or more but not more than 16|% by weight
Copolymer of α-methylstyrene and styrene, having a softening point of more than 113|ºC
Copolymer of maleic acid and methyl vinyl ether
Copolymer of styrene with α-methylstyrene and acrylic acid, of a number average molecular weight (M@n) of 500|or more but not more than 6000
Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene and 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503442-46-4)
Hydrogenated polymer of 1,2,3,4,4a,5,8,8a-octahydro-1,4:5,8-dimethanonaphthalene with 4,4a,9,9a-tetrahydro-1,4-methano-1H-fluorene (CAS RN 503298-02-0)
Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (M@n) of not more than 4500, in flake or powder form
Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether
Aqueous solution containing by weight: -|30|% or more but not more than 40|% of poly-4-vinylpyridine-N-oxide, -|0,1|% or more but not more than 4|% of isonicotinic acid-N-oxide, -|0,1|% or more but not more than 3,5|% of sodium sulphate, -|0,1|% or more but not more than 2|% of 4-acetylpyridine-N-oxide
Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)
Other
Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms
Cellulose acetates
Non-plasticised
Cellulose acetate flakes
Cellulose triacetate (CAS RN 9012-09-3)
Cellulose diacetate|powder
Other
Plasticised
Cellulose nitrates (including collodions)
Non-plasticised
Collodions and celloidin
Other
Plasticised
Cellulose ethers
Carboxymethylcellulose and its salts
Other
Hydroxypropylcellulose
Other
Ethylcellulose, not plasticized
Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27|(±|3)|% of ethylcellulose
Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3|or more carbon atoms
Hypromellose (INN) (CAS RN 9004-65-3)
Polyquaternium 10|(CAS|RN|68610-92-4)
Other
Other
Cellulose esters
Cellulose acetate propionate, non-plasticised, in the form of powder: -|containing by weight 25|% or more of propionyl (as determined by the ASTM D 817-72|method) and -|of a viscosity of not more than 120|poise (as determined by the ASTM D 817-72|method), for the manufacture of printing inks, paints, lacquers and other coatings, and reprographic coatings
Hydroxypropyl methylcellulose phthalate
Other
Other
Natural polymers (for example, alginic acid) and modified natural polymers (for example, hardened proteins, chemical derivatives of natural rubber), not elsewhere specified or included, in primary forms
Alginic acid, its salts and esters
Sodium alginate, extracted from brown seaweed (CAS RN 9005-38-3)
Other
Other
Chemical derivatives of natural rubber
Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)
Sodium hyaluronate
Sterile|sodium hyaluronate (CAS RN 9067-32-7)
Non sterile
With: - a weight average molecular weight (Mw) of not more than 900 000, - an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg, - an ethanol content of not more than 1% by weight, - an isopropanol content of not more than 0,5% by weight
Other
Protein, chemically modified by carboxylation and/or phthalic acid addition, having a weight average molecular weight (M@w) of 100|000|to 300|000
Hardened proteins
Granules containing by weight: -|35|% or more but less than 75|% of a high amylose extruded biopolymer produced from corn starch, -|5|% or more but less than 16|% polyvinyl alcohol, -|10|% or more but less than 46|% of polyol plasticisers, -|0.25|% or more but less than 3|% of stearic acid, -|whether or not containing 30|% (± 10|%) of biodegradable polyester resin but never to a level that exceeds the amount of the high amylose biopolymer
Chondroitinsulphuric acid, sodium salt|(CAS RN 9082-07-9)
Powder consisting of 90|% (± 5|%) by weight of a high amylose extruded biopolymer produced from corn starch, 10|% (± 5|%) by weight of a synthetic polymer and 0.5|% (± 0.25|%) of stearic acid
Other
Ion-exchangers based on polymers of headings|3901|to 3913, in primary forms
II. WASTE, PARINGS AND SCRAP; SEMI-MANUFACTURES; ARTICLES
Waste, parings and scrap, of plastics
Of polymers of ethylene
Of polymers of styrene
Of polymers of vinyl chloride
Of other plastics
Of polymers of propylene
Other
Monofilament of which any cross-sectional dimension exceeds 1|mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics
Of polymers of ethylene
For use in certain types of aircraft
Other
Of polymers of vinyl chloride
For use in certain types of aircraft
Other
Profiles of poly(vinyl chloride) of a kind|used in the manufacture of|sheet pilings and facings, containing the following additives: -|titanium dioxide -|poly(methyl methacrylate) -|calcium carbonate -|binding agents
Other
Of other plastics
Of condensation or rearrangement polymerisation products, whether or not chemically modified
Rods with cellular structure, containing by weight: -|polyamide-6|or poly(epoxy anhydride) -|7|% or more but not more than 9|% of polytetrafluorethylene if present -|10|% or more but not more than 25|% of inorganic fillers
Other
Of addition polymerisation products
For use in certain types of aircraft
Other
Other
Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics
Artificial guts (sausage casings) of hardened protein or of cellulosic materials
Of hardened protein
Of cellulosic materials
Tubes, pipes and hoses, rigid
Of polymers of ethylene
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
For use in certain types of aircraft
Other
Other
With fittings attached, for use in civil aircraft
For use in certain types of aircraft
Other
Of polymers of propylene
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
For use in certain types of aircraft
Other
Other
With fittings attached, for use in civil aircraft
For use in certain types of aircraft
Other
Of polymers of vinyl chloride
Seamless and of a length exceeding the maximum cross-sectional dimension, whether or not surface-worked, but not otherwise worked
For use in certain types of aircraft
Other
Other
With fittings attached, for use in civil aircraft
For use in certain types of aircraft
Other
Of other plastics
Of addition polymerisation products
For use in certain types of aircraft
Other
Other
With fittings attached, for use in civil aircraft
Other
Other tubes, pipes and hoses
Flexible tubes, pipes and hoses, having a minimum burst pressure of 27,6|MPa
With fittings attached, for use in civil aircraft
For use in certain types of aircraft
Other
Other, not reinforced or otherwise combined with other materials, without fittings
For use in certain types of aircraft
Other
Pipe consisting of a block copolymer of polytetrafluoroethylene and polyperfluoroalkoxytrifluoroethylene, of a length of not more than 600|mm, a diameter of not more than 85|mm and a wall-thickness of 30|µm or more but not more than 110|µm
Other
Other, not reinforced or otherwise combined with other materials, with fittings
With fittings attached, for use in civil aircraft
Other
Other
With fittings attached, for use in civil aircraft
Other
For use in certain types of aircraft
Other
Fittings
For use in civil aircraft
Other
Plastic connectors containing O-rings,|a retainer clip and a release system for insertion into car fuel hoses
Other
Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9|to this chapter
Of polymers of vinyl chloride
Consisting of a support impregnated, coated or covered with poly(vinyl chloride)
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Of other plastics
For use in certain types of aircraft
Other
Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls
In rolls of a width not exceeding 20|cm
Strips, the coating of which consists of unvulcanised natural or synthetic rubber
Of poly(vinyl chloride) or of polyethylene
Of polypropylene
Other
Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film
Rolls of two-sided adhesive tape: -|coated with non-vulcanised natural or synthetic rubber -|with a width of 20|mm or more but not more than 40|mm -|containing silicone, aluminium hydroxide, acryl and urethane
Other
Other
For use in certain types of aircraft
Other
Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film
Polyester film: -|coated on one side|with an acrylic thermal release adhesive that debonds at temperatures of|90|°C or more but not more than|200|°C, and a polyester liner, and -|on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of|90|°C or more but not more than| 200|°C, and a polyester liner
Double-sided, self-adhesive modified epoxy resin foil, put up in rolls, 10 to 20 cm wide, 10 to 210 m long and with a total thickness of 10 to 50 μm, not for retail sale
Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film
Polytetrafluoroethylene film: -|with a thickness of 100|µm or more, -|an elongation at break of not more than 100|%, -|coated on one side with a pressure sensitive silicon adhesive
Black poly(vinyl chloride) film: •with a gloss of more than 30 degrees according to ASTM D2457, •whether or not covered on one side with a protective poly(ethylene terephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner
Ethylene vinyl acetate film: -|of|a thickness of 100|µm or more, -|coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester|or polypropylene liner
Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38|mm or more but not more than 1,53|mm
Polyester, polyurethane or polycarbonate foil: -|with pressure sensitive silicone polymer adhesive, -|of a total thickness of not more than 0,7|mm, -|of a total width of 1|cm or more, but not more than 1|m, -|whether or not in rolls of a kind used for the protection of the surface of products of headings 8521|and 8528
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs
Polyethylene foil: -|with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces, -|of a total thickness of 0,025|mm or more, but not more than 0,7|mm, and -|of a total width of 6|cm or more, but not more than 1|m, -|whether or not in rolls, of a kind used for the protection of the surface of products of headings 8521|and 8528
Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90|º of more than 25|N/cm (as determined by the ASTM D 3330|method)
Reflecting sheet: -|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -|covered on one or both sides with one or more layers of plastic or metallisation, and -|whether or not covered on one side with a self-adhesive layer and a release sheet
Reflecting laminated sheet showing a regular pattern, consisting of a film of poly(methylmethacrylate), followed by a layer of acrylic polymer containing microprisms, a film of poly(methylmethacrylate), an adhesive layer and a release sheet
Reflecting film consisting of -|a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, -|a layer of an acrylic resin having embedded glass beads, -|a layer of an acrylic resin hardened by a melamine cross-linking agent, -|a metal layer, -|an acrylic adhesive, and -|a release film
Rolls of polyethylene foil: -|self-adhesive on one side, -|of a total thickness of 0,025|mm or more, but not more than 0,09|mm, -|of a total width of 60|mm or more, but not more than 1|110|mm, of a kind used for the protection of the surface of products of headings 8521|or 8528
Self-adhesive reflecting sheet whether or not in segmented pieces, -|whether or not containing a watermark, -|with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: -|a layer of acrylic or vinyl polymer, -|a layer of poly(methyl methacrylate)| or| polycarbonate containing microprisms, -|a layer of metallisation, -|an adhesive layer, and -|a release sheet -|whether or not containing an additional layer of polyester
Self adhesive reflecting film, consisting of several layers including: -|a copolymer of acrylic resin, -|polyurethane,| -|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, -|glass microspheres, and -|an adhesive layer, with a release liner on one or both sides
Acrylic tape put up in rolls: -|self-adhesive on both sides,| -|of a total thickness of 0,04|mm or more, but not more than 1,25|mm, -|of a total width of 5|mm or more but not more than 1|205|mmfor use in the manufacture of products of headings 8521|and 8528
Poly(vinyl chloride) or polyethylene or any other polyolefine film: -|of|a thickness of 65|µm or more, -|coated on one side|with an acrylic UV-sensitive adhesive and a polyester liner
Other
Other
For use in certain types of aircraft
Other
Transparent poly(ethylene terephthalate) self-adhesive film: -|free from impurities or faults, -|coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound, -|whether or not with a printable dust-proof layer of modified long chain alkyl organic compound, -|with a total thickness without the liner of 54|μm or more but not more than 64|μm, and -|a width of more than 1|295|mm but not more than 1|305|mm
Polyester film: -|coated on one side|with an acrylic thermal release adhesive that debonds at temperatures of|90|°C or more but not more than|200|°C, and a polyester liner, and -|on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of|90|°C or more but not more than| 200|°C, and a polyester liner
Film consisting of 1|to 3|laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner
Reflecting laminated sheet: -|consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern, -|covered on both sides with one or more layers of plastic material and -|covered on one side with an adhesive layer and a release sheet
Film consisting of a multi-layer construction of poly(ethylene terephthalate) and copolymer of butylacrylate and methylmethacrylate, coated on one side with an acrylic abrasion resistant coating incorporating nanoparticles of antimony tin oxide and carbon black, and on the other side with an acrylic pressure sensitive adhesive and a silicone-coated poly(ethylene terephthalate) protective liner
Ethylene vinyl acetate film: -|of|a thickness of 100|µm or more, -|coated on one side with an acrylic pressure sensitive or UV-sensitive adhesive and a polyester|or polypropylene liner
Poly(ethylene terephthalate) film, with an adhesive strength of not more than 0,147|N/25|mm and an electrostatic discharge of not more than 500|V
Poly(vinyl chloride) or polyethylene or any other polyolefine film: -|of|a thickness of 65|µm or more, -|coated on one side|with an acrylic UV-sensitive adhesive and a polyester liner
Polyester film coated on both sides with an acrylic and/or rubber (pressure sensitive) adhesive put up in rolls of a width of 45,7|cm or more but not more than 132|cm (supplied with a release liner)
Reflecting sheet: -|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -|covered on one or both sides with one or more layers of plastic or metallisation, and -|whether or not covered on one side with a self-adhesive layer and a release sheet
Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film
Polyester, polyurethane or polycarbonate foil: -|with pressure sensitive silicone polymer adhesive, -|of a total thickness of not more than 0,7|mm, -|of a total width of 1|cm or more, but not more than 1|m, -|whether or not in rolls of a kind used for the protection of the surface of products of headings 8521|and 8528
Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60|μm or more, but not more than 70|μm, and with a width of more than 1|245|mm but not more than 1|255|mm
Polyethylene foil: -|with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces, -|of a total thickness of 0,025|mm or more, but not more than 0,7|mm, and -|of a total width of 6|cm or more, but not more than 1|m, -|whether or not in rolls, of a kind used for the protection of the surface of products of headings 8521|and 8528
Reflecting layered sheet on rolls, with a width of more than 20|cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with: -|a layer of polyurethane containing glass micro beads, -|a layer of poly(ethylene vinyl acetate), -|an adhesive layer, and -|a release sheet
Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride) •|whether or not with a pressure or heat sensitive adhesive layer •|whether or not with a release film •|with a toxicity (as determined by test method ABD|0031) of not more than 70|ppm hydrogen fluoride, not more than 120|ppm hydrogen chloride, not more than 10|ppm hydrogen cyanide, not more than 10|ppm nitrogen oxides, not more than 300|ppm carbon monoxide and not more than 10|ppm dihydrogen sulphide and sulphur dioxide taken together •|with a flammability within 60|seconds of not more than 130|mm (as determined by test method FAR 25|App.F Pt. I Amdt.83) •|with a weight (without release film) of 240|g/m$2|(±|30|g/m$2) without adhesive layer, of|340|g/m$2|(±|40|g/m$2) with heat sensitive adhesive layer or of 330|g/m$2|(±|40|g/m$2) with pressure sensitive layer
Self-adhesive film composed of: -|a|top layer predominantly of polyurethane mixed with acrylic polymer emulsions and titanium dioxide, -|whether or not containing a second layer of a mixture of vinyl acetate-ethylene copolymer and cross-linkable|vinyl acetate polymer|emulsions, -|not more than 6|% by weight of other additives, -|a|pressure sensitive adhesive; and -|covered on one side with a release liner, -|whether or not with a separate self-adhesive over laminate protective film, -|of a total thickness of not more than 400|µm
Poly(vinyl chloride) sheeting, of a thickness of less than 1|mm, coated with an adhesive in which are embedded glass balls of a diameter of not more than 100|µm
Film, with a total thickness of 40|µm or more, consisting of one or more layers of transparent polyester film: -|containing at least one infrared reflective layer with a total normal reflectance according to EN|12898|of 80|% or more -|having on one side a layer with a normal emissivity according to EN|12898|of not more|than|0,2 -|coated on the other side with a pressure sensitive adhesive and a release liner
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs
Self-adhesive film composed of: -|a|first layer containing a mixture of thermoplastic polyurethane and anti-blocking agent, -|a|second layer containing a maleic anhydride copolymer, -|a|third layer containing a mixture of low density polyethylene, titanium dioxide and additives, -|a fourth layer containing a mixture of low density polyethylene, titanium dioxide, additives and colour pigment, -|a|pressure sensitive adhesive; and -|covered on one side with a release liner -|whether or not with a separate self-adhesive over laminate protective film -|of a total thickness of not more than 400|μm
Black poly(vinyl chloride) film: •with a gloss of more than 30 degrees according to ASTM D2457, •whether or not covered on one side with a protective poly(ethylene terephthalate) film, and on the other side with a pressure sensitive adhesive with channels and a release liner
Printed laminated sheet -|with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride), -|on one side covered with a layer of poly(vinyl fluoride), -|whether or not with a pressure sensitive adhesive layer and a release film on the other side, -|with a toxicity (as determined by test method ABD|0031) of not more than 50|ppm hydrogen fluoride, not more than 85|ppm hydrogen chloride, not more than 10|ppm hydrogen cyanide, not more than 10|ppm nitrogen oxides, not more than 300|ppm carbon monoxide and not more than 10|ppm dihydrogen sulphide and sulphur dioxide taken together, -|with a flammability within 60|seconds of not more than 110|mm (as determined by test method FAR 25|App.F Pt. I Amdt.83), and -|with a weight (without release film) of 490|g/m$2|(±|45|g/m$2) without adhesive layer or of 580|g/m$2|(±|50|g/m$2) with pressure sensitive layer
Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38|mm or more but not more than 1,53|mm
Polariser film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side
Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet
Self-adhesive reflecting sheet whether or not in segmented pieces, -|whether or not containing a watermark, -|with or without an application tape coated on one side with an adhesive; the reflective sheet consists of: -|a layer of acrylic or vinyl polymer, -|a layer of poly(methyl methacrylate)| or| polycarbonate containing microprisms, -|a layer of metallisation, -|an adhesive layer, and -|a release sheet -|whether or not containing an additional layer of polyester
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 90μm, covered on one side with an adhesive layer and a release sheet
White polyolefin tape consisting of: -|an adhesive layer based on synthetic rubber with a thickness of 8|µm or more but not more than 17|µm, -|a polyolefin layer with a thickness of 28|µm or more but not more than 40|µm, and -|a non-silicone release layer with a thickness below 1|µm
Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90|º of more than 25|N/cm (as determined by the ASTM D 3330|method)
Poly(vinyl chloride) film, whether or not covered on one side with a layer of polymer, with -|an acrylic adhesive with an adhesive strength of 70|N/m or more whether or not reduced upon irradiation, -|a total thickness without release liner of 78|microns or more, and -|a release liner, whether or not equipped with oblate spheres and on one side embossed
Reflecting film containing: -|a poly(vinyl chloride) layer, -|a polyurethane layer, -|a glass microspheres layer, -|a layer whether or not incorporating a security and/or official mark which changes appearance with angle of view, -|a metallised aluminium layer, and -|an adhesive, covered on one side with a release liner
Co-extruded trilayer film, -|each layer containing a mixture of polypropylene and polyethylene, -|containing not more than 3|% by weight of other polymers, -|whether or not containing titanium dioxide in the core layer, -|coated with an acrylic pressure sensitive adhesive and -|with a release liner -|of an overall thickness of not more than 110|µm
Self-adhesive film with a thickness of 40 µm or more, but not more than 400 µm, consisting of one or more layers of transparent, metallized or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner
Self-adhesive plastic film consisting of: -|a poly(olefin) layer with a thickness of more than 95|but not more than 110|microns -|an adhesive layer with a thickness of more than 5|but not more than 15|microns -|a layer based on epoxy resin, with a thickness of more than 4|but not more than 100|microns -|a liner consisting of poly(ethylene terephthalate) with a thickness of more than 35|but not more than 40|microns
Self-adhesive polishing discs of microporous polyurethane, whether or not|coated with a|pad
Rolls of polyethylene foil: -|self-adhesive on one side, -|of a total thickness of 0,025|mm or more, but not more than 0,09|mm, -|of a total width of 60|mm or more, but not more than 1|110|mm, of a kind used for the protection of the surface of products of headings 8521|or 8528
Self adhesive reflecting film, consisting of several layers including: -|a copolymer of acrylic resin, -|polyurethane,| -|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use, -|glass microspheres, and -|an adhesive layer, with a release liner on one or both sides
Film of a minimum thickness of 0,36|mm, consisting of the following: -|an embossed polyester layer, -|a caprolactone-cyclohexylene isocyanate copolymer layer, -|a pressure sensitive adhesive and covered on one side with a release liner
Acrylic tape put up in rolls: -|self-adhesive on both sides,| -|of a total thickness of 0,04|mm or more, but not more than 1,25|mm, -|of a total width of 5|mm or more but not more than 1|205|mmfor use in the manufacture of products of headings 8521|and 8528
Multi-layered film of poly(methyl methacrylate) and metallised layers of silver and copper: -|having a minimum reflectance of 93,5|% as determined by ASTM G173-03, -|covered on one side with a removable layer of polyethylene, -|covered on the other side with an acrylic pressure sensitive adhesive and a siliconised polyester liner
Self adhesive transparent film, having a transmittance of more than 90|% and a haze of less than 3|% (as determined by ASTM D1003), consisting of several layers including: -|an acrylic adhesive layer with a thickness of 20|µm or more but not more than 70|µm, -|a polyurethane based layer with a thickness of 100|µm or more but not more than 300|µm
Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers
Other
Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials
Of polymers of ethylene
Of a thickness not exceeding 0,125|mm
Of polyethylene having a specific gravity of
Less than 0,94
Polyethylene film, of a thickness of 20|micrometres or more but not exceeding 40|micrometres, for the production of photoresist film used in the manufacture of semiconductors or printed circuits
Stretch film, not printed
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Film of a thickness of not more than 0,20|mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber
Film of polyethylene, of a kind used for typewriter ribbon
Other
0,94|or more
For use in certain types of aircraft
Other
Printed embossed|film -|of polymers of ethylene -|having a|gravity of 0,94g/cm3|or more -|of a thickness of 0,019mm ±| 0,003mm -|with permanent graphics consisting of two different alternating designs whose individual length is 525|mm or more
Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics: -|is repetitive and equally spaced along the length of the film -|is equally and visibly aligned when viewed from the back or front of the film
Polyethylene foil: -|with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces, -|of a total thickness of 0,025|mm or more, but not more than 0,7|mm, and -|of a total width of 6|cm or more, but not more than 1|m, -|whether or not in rolls, of a kind used for the protection of the surface of products of headings 8521|and 8528
Other
Other
For use in certain types of aircraft
Other
Co-extruded seven to nine layered film predominately of copolymers of ethylene or functionalized polymers of ethylene, consisting of: -|a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, -|covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110|µm
Tubular layered film predominately of polyethylene: -|consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on| either side with a layer of polyamide, covered on either side with at least one layer of polyethylene, -|having a total thickness of 55|µm or more, -|having a diameter of 500|mm or more but not more than 600|mm
Other
Of a thickness exceeding 0,125|mm
Synthetic paper pulp, in the form of moist sheets made from unconnected finely branched polyethylene fibrils, whether or not blended with cellulose fibres in a quantity not exceeding 15|%, containing poly(vinyl alcohol) dissolved in water as the moistening agent
Other
For use in certain types of aircraft
Other
Film of a thickness of not more than 0,20|mm, of a blend of polyethylene and a copolymer of ethylene with oct-1-ene, embossed in a regular rhomboidal pattern, for coating both sides of a layer of unvulcanized rubber
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 µm or more and an adhesive part of acrylic type of a thickness of 5 µm or more, for use in the grinding and/or dicing process of silicon discs
Ethylene vinyl acetate (EVA) film with: -|a raised relief surface with embossed undulations, and -|a thickness of more than 0,125|mm
Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0.8|mm or more but not exceeding 1.2|mm
Polyethylene foil: -|with pressure sensitive, non-rubber adhesive adhering solely to clean and smooth surfaces, -|of a total thickness of 0,025|mm or more, but not more than 0,7|mm, and -|of a total width of 6|cm or more, but not more than 1|m, -|whether or not in rolls, of a kind used for the protection of the surface of products of headings 8521|and 8528
Other
Of polymers of propylene
Of a thickness not exceeding 0,10|mm
Biaxially oriented
For use in certain types of aircraft
Biaxially oriented polypropylene film with a coextruded layer of polyethylene on one side and a total thickness of 11,5|µm or more but not more than 13,5|µm
Sheets of biaxially - oriented polypropylene|film: -|with the thickness of not more than 0,1|mm, -|printed on both sides with specialised coatings to allow banknote security printing
Other
Other
For use in certain types of aircraft
Other
Sheet of polypropylene in the form of a roll: -|with a thickness of not more than 30|μm, -|of a width of not more than 210|mm, -|conforming to ASTM|D882,for use in the manufacture of separators for lithium-ion electric vehicle batteries
Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of: -|a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, -|covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110|µm
Mono-axial oriented film, of a total thickness of not more than 75µm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having: -|a tensile strength in the machine direction of 120|MPa or more but not more than 270|MPa and -|a tensile strength in the transverse direction of 10|MPa or more but not more than 40|MPa as determined by test method ASTM D882/ISO 527-3
Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having: -|a thickness of 55|µm or more but not more than 97|µm, -|a tensile modulus in the machine direction of 0,30|GPa or more but not more than 1,45|GPa, and -|a tensile modulus in the transverse direction of 0,20|GPa or more but not more than 0,70|GPa
Co-extruded trilayer film, •each layer containing a mixture of polypropylene and polyethylene, •containing not more than 3% by weight of other polymers, •whether or not containing titanium dioxide in the core layer, •of an overall thickness of not more than 70 µm
Other
Of a thickness exceeding 0,10|mm
For use in certain types of aircraft
Other
Laminated sheet or strip, consisting of a film of a thickness of 181|µm or more but not more than 223|µm composed of a blend of a copolymer of propylene with ethylene and a copolymer of styrene-ethylene-butylene-styrene (SEBS) coated or covered on one side with a layer of a copolymer of styrene-ethylene-butylene-styrene (SEBS) and a layer of polyester
Co-extruded seven to nine layered film predominately of copolymers of propylene, consisting of: -|a tri-layer barrier with a core layer predominantly of ethylene vinyl alcohol covered on either side with a layer predominantly of cyclic olefin polymers, -|covered on either side with two or more layers of polymeric material, and having an overall total thickness of not more than 110|µm
Polypropylene sheet, put up in rolls, with: -|flame retardant level of UL 94|V-0|for material thicknesses of 0,25|mm or more and level UL 94|VTM-0|for material thicknesses of 0,05|mm or more but not more than 0,25|mm (as determined by Flammability Standard UL-94) -|dielectric breakdown of 13,1|kV or more but not more than 60,0|kV(as determined by ASTM D149) -|tensile yield in a machine direction of 30|MPa or more but not more than 33|MPa (as determined by ASTM D882) -|tensile yield in a transverse direction of 22|MPa or more but not more than 25|MPa (as determined by ASTM D882) -|density range of 0,988|g/cm$3|or more but not more than 1,035|g/cm$3|(as determined by ASTM D792) -|moisture absorption of 0,01|% or more but not more than 0,06|% (as determined by ASTM D570) for use in the manufacture of insulators used in the electronics and electrical industries
Other
Of polymers of styrene
Acrylonitrile-butadiene-styrene, for use in certain types of aircraft
Other
Of polymers of vinyl chloride
Containing by weight not less than 6|% of plasticisers
Of a thickness not exceeding 1|mm
For use in certain types of aircraft
Other
Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60|µm or more but not more than 80|µm, containing 30|or more but not more than 40|parts of plasticizer to 100|parts of poly(vinyl chloride)
Film of a specular gloss of 70|or more, measured at an angle of 60|° using a glossmeter (as determined by the ISO 2813:2000|method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26|mm or more but not more than 1,0|mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1|000|mm or more but not more than 1|450|mm, for use in the manufacture of goods of heading|9403
Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet
Other
Of a thickness exceeding 1|mm
For use in certain types of aircraft
Other
Other
Of a thickness not exceeding 1|mm
For use in certain types of aircraft
Other
Film of a (polyvinyl)chloride-copolymer -|containing by weight 45|% or more of fillers -|on a support
Film of a specular gloss of 70|or more, measured at an angle of 60|° using a glossmeter (as determined by the ISO 2813:2000|method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26|mm or more but not more than 1,0|mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1|000|mm or more but not more than 1|450|mm, for use in the manufacture of goods of heading|9403
Printed laminated sheet with a central layer of poly(vinyl chloride), coated on both sides with a layer of poly(vinyl fluoride) -|whether or not with a pressure or heat sensitive adhesive layer -|whether or not with a release film -|with a toxicity (as determined by test method ABD|0031) of not more than 70|ppm hydrogen fluoride, not more than 120|ppm hydrogen chloride, not more than 10|ppm hydrogen cyanide, not more than 10|ppm nitrogen oxides, not more than 300|ppm carbon monoxide and not more than 10|ppm dihydrogen sulphide and sulphur dioxide taken together -|with a flammability within 60|seconds of not more than 130|mm (as determined by test method FAR 25|App.F Pt. I Amdt.83) -|with a weight (without release film) of 240|g/m$2|(±|30|g/m$2) without adhesive layer, of|340|g/m$2|(±|40|g/m$2) with heat sensitive adhesive layer or of 330|g/m$2|(±|40|gm$2) with pressure sensitive layer
Other
Of a thickness exceeding 1|mm
For use in certain types of aircraft
Other
Of acrylic polymers
Of poly(methyl methacrylate)
Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5|mm or more but not more than 19|mm
Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50μm or more but not exceeding 90μm
Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)
Sheets of polymethylmethacrylate conforming to standard — EN 4364 (MIL-P-5425E) and DTD5592A, or — EN 4365 (MIL-P-8184) and DTD5592A
Other
Other
Copolymer of acrylic and methacrylic esters, in the form of film of a thickness not exceeding 150|micrometres
Other
Non-cellular and non-laminated sheet of modified copolymer of acrylonitrile-methyl acrylate with a thickness of 1.0|mm or more but not more than 1.3|mm, put up in rolls
Non-self adhesive reflecting film, consisting of several layers including: -|a copolymer of acrylic resin -|polyurethane -|a metalised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use -|glass microspheres, and -|a permanent liner of poly(ethyleneterephthalate)
other
Of polycarbonates, alkyd resins, polyallyl esters or other polyesters
Of polycarbonates
Reflecting sheet: -|of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern -|covered on one or both sides with one or more layers of plastic or metallisation, and -|whether or not covered on one side with a self-adhesive layer and a release sheet
Other
Of poly(ethylene terephthalate)
Of a thickness not exceeding 0,35|mm
Poly(ethylene terephthalate) film, of a thickness of 72|micrometres or more but not exceeding 79|micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100|micrometres or more but not exceeding 150|micrometres, for the manufacture of photopolymer printing plates
Other
Coextruded opaque sheet of poly(ethylene terephthalate), of a thickness of 50|µm or more but not more than 350|µm, consisting especially of a layer containing carbon black
Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25|µm, either: -|only dyed in the mass, or -|dyed in the mass and metallised on one side
Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120|µm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material
Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120|µm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material
Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers
Poly(ethylene terephthalate) film, of a thickness of not more than 12|µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35|nm
Sheets or rolls of poly(ethylene terephthalate): -|coated on both sides with a layer of epoxy acrylic resin, -|of a total thickness of 37|μm (±|3|μm)
Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1|% of aluminium, of a thickness of not more than 300|µm and having a surface resistivity of not more than 10|000|ohms (per square) (as determined by the ASTM D 257-99|method)
Poly (ethylene terephtalate) film: -|of a thickness of not more than 20|µm, -|coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm
Iridescent film of polyester and poly(methyl methacrylate)
Transparent poly(ethylene terephthalate) film: -|coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7|nm or more but not more than 80|nm, -|with a surface tension of 36|Dyne/cm or more but not more than 39|Dyne/cm, -|with a light transmission of more than 93|%, -|with a haze value of not more than 1,3|%, -|with a total thickness of 10|µm or more but not more than 350|µm, -|with a width of 800|mm or more but not more than|1|600|mm
Other
Of a thickness exceeding 0,35|mm
Of unsaturated polyesters
Of other polyesters
Film of poly(ethylene naphthalene-2,6-dicarboxylate)
Iridescent film of polyester and poly(methyl methacrylate)
Monolayer, biaxially oriented film: -|composed of more than 85|% by weight of poly(lactic acid) and not more than 10,50|% by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc, -|having a thickness of 20|µm or more but not more than 120|µm -|biodegradable and compostable (as determined by the method |EN 13432)
Monolayer, transverse oriented, shrink film: -|composed of more than 80|% by weight of poly(lactic acid) and not more than 15,75|% by weight of additives of modified poly(lactic acid), -|having a thickness of 45|µm or more but not more than 50|µm, -|biodegradable and compostable (as determined by the method |EN 13432)
Other
Of cellulose or its chemical derivatives
Of regenerated cellulose
Of cellulose acetate
Film in rolls or in strips, for cinematography or photography
Other
Of other cellulose derivatives
Of vulcanised fibre
Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5|mm
Other
Other
Of other plastics
Of poly(vinyl butyral)
For use in certain types of aircraft
Other
Poly(vinyl butyral) film containing by weight 25|% or more but not more than 28|% of tri-isobutyl phosphate as a plasticiser
Poly(vinyl butyral) film: -|containing by weight| 26|% or more but not more than|30|% of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser, -|with a thickness|of 0,73|mm or more but not more than 1,50|mm
Poly(vinyl butyral) film having a graduated coloured band
Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics: -|a visible light transmission of 50|% or more, -|coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral), -|a total thickness of not more than 0,2|mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2|mm
Co-extruded trilayer poly(vinyl butyral) film
Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29|% or more but not more than 31|% of 2,2'-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser
Other
Other
Of polyamides
Polyamide film: -|of a thickness of not more than 20|µm, -|coated on at least one side with a gas barrier layer which consists of a polymeric matrix in which silica has been dispersed and of a thickness of not more than 2|µm
Other
Of amino-resins
Of phenolic resins
Of other plastics
Of condensation or rearrangement polymerisation products, whether or not chemically modified
Polyimide sheet and strip, uncoated, or coated or covered solely with plastic
Other
Polyether imide sheets, in rolls, with -|a thickness of 5|µm or more, but not more than 14|µm, -|a width of 478|mm or more, but not more than 532|mm, -|a tensile strength at break of 78|MPa or more (as determined by JIS C-2318|for a film thickness of 50|µm), -|an elongation at break of 50|% or more (as determined by JIS C-2318|for a film thickness of 50|µm), -|a glass transition point (Tg) of 226|°C, -|a continuous service temperature of 180|°C (as determined by UL-746|B for a film thickness of 50|µm), -|a flammability of VTM-0|(as determined by UL 94|for a film thickness of 25|µm)
Polymer film containing the following monomers: -|poly (tetramethylene ether glycol), -|bis (4-isocyanotocyclohexyl) methane, -|1,4-butanediol or 1,3-butanediol, -|with a thickness of 0,25|mm or more but not more than 5,0|mm, -|embossed with a regular pattern on one surface, -|and covered with a release sheet
Transparent polyurethane film metallised on one side: -|with a gloss of more than 90|degrees according to ASTM|D2457 -|covered on the metalized side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer -|covered on the other side with a protective poly(ethylene terephthalate) film -|with a total thickness of more than 204|µm but not more than 244|µm
Thermoplastic polyurethane film, of a thickness of 250|μm or more but not more than 350|μm, covered on one side with a removable protective film
Thermoplastic polyurethane film extruded, with : -|not self-adhesive, -|an index of yellow lower of more than 1,0|but not more than 2,5|for 10|mm stacked films (as determined by test method ASTM|E|313-10), -|a light transmission higher to 87|% for 10|mm stacked films (as determined by test method ASTM|D|1003-11), -|a total thickness of 0,38|mm or more, but not more than 7,6|mm, -|a width of 99|cm or more, but not more than 305|cm, of a kind used in the production of laminated safety glass
Silicone tape, plate or strip: -|of a total thickness of 2|mm or more, but not more than|9|mm, -|of a total width of 12|mm or more, but not more than 65|mm, for use in the manufacture of products of headings 8521|or 8528
Matt, thermoplastic polyurethane foil in rolls with: -|a width of 1640|mm| (± 10|mm), -|a gloss of 3,3|degrees or more but not more than 3,8|(as determined by the method ASTM D2457), -|a surface roughness of 1,9|Ra or more but not more than 2,8|Ra (as determined by the method ISO 4287), -|a thickness of more than 365|µm but not more than 760|µm, -|a hardness of 90|(± 4) (as determined by the method: Shore A (ASTM D2240)), -|an elongation to break of 470|% (as determined by the method: EN|ISO|527)
Sheets on rolls, consisting of epoxy resin, with conducting properties, containing: -|microspheres with a coating of metal, whether or not alloyed with gold, -|an adhesive layer, -|with a protective|layer of silicone or poly(ethylene terephthalate) on one|side,| -|with a protective layer of poly(ethylene terephthalate) on the other side, and -|with a width of 5|cm or more but not more than 100|cm -|with a length of not more than 2|000|m
Thermoplastic polyurethane foil in rolls with: -|a width of more than 900|mm but not more than 1016|mm, -|a matt finish, -|a thickness of 0,43|mm (± 0.03|mm), -|an elongation to break of 420|% or more but not more than 520|%, -|a tensile strength of 55|N/mm$2$ (± 3) (as determined by the method EN ISO 527) -|a hardness of 90|(± 4) (as determined by the method: Shore A [ASTM D2240]), -|wrinkle inside (waves) of 6,35|mm, -|a flatness of 0,025|mm
Other
Of addition polymerisation products
Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97|% or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1|mm
Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells
Other
For use in certain types of aircraft
Other
Poly(1-chlorotrifluoroethylene) film
Polytetrafluoroethylene film, non-microporous, in the form of rolls, of a thickness of 0,019|mm or more but not more than 0,14|mm, impermeable to water vapour
Ion-exchange membranes of fluorinated plastic material
Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34|µm or more but not more than 90|µm, a tensile strength at break of 20|MPa or more but not more than 55|MPa and an elongation at break of 250|% or more but not more than 900|%
Other
Other
Anisotropic conductive film, in rolls, of a width of 1,5|mm or more but not more than 3,15|mm and a maximum length of 300|m, used for joining electronic components in the production of LCD or plasma displays
Other
Other plates, sheets, film, foil and strip, of plastics
Cellular
Of polymers of styrene
Acrylonitrile butadiene styrene, for use in certain types of aircraft
Other
Of polymers of vinyl chloride
For use in certain types of aircraft
Other
Of polyurethanes
Flexible
Sheet of polyurethane foam, of a thickness of 3|mm (±|15|%) and of a specific gravity of 0,09435|or more but not more than 0,10092
Rolls of open-cell polyurethane foam: -|with a thickness of 2,29|mm (±|0,25|mm), -|surface-treated with a foraminous adhesion promoter, and -|laminated to a polyester film and|a layer of textile material
Other
Other
Of regenerated cellulose
Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm)
Other
Of other plastics
For use in certain types of aircraft
Other
Blocks with cellular structure, containing by weight: -|polyamide-6|or poly(epoxy anhydride) -|7|% or more but not more than 9|% of polytetrafluorethylene if present -|10|% or more but not more than 25|% of inorganic fillers
Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with: -|a width of 98|mm or more but not more than170|mm, -|a thickness of 15|µm or more but not more than 36|µm, of a kind used for the manufacture of alkaline battery separators
Microporous polypropylene film of a thickness of not more than 100|µm
Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment
Film of polyethersulfone, of a thickness of not more than 200|µm
Cellular film, consisting of a layer of polyethylene of a thickness of 90|µm or more but not more than 140|µm and a layer of regenerated cellulose of a thickness of 10|µm or more but not more than 40|µm
Other
Other
Of condensation or rearrangement polymerisation products, whether or not chemically modified
Of polyesters
Corrugated sheet and plates
Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres
Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin
Multilayer film consisting of: -|a poly(ethylene terephthalate) film with a thickness of more than 100|µm but not more than 150|µm, -|a primer of phenolic material with a thickness of more than 8|µm but not more than 15|µm, -|an adhesive layer of a synthetic rubber with a thickness of more than 20|µm but not more than 30|µm, -|and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35|µm but not more than 40|µm
Other
Of phenolic resins
Of amino-resins
Laminated
High-pressure laminates with a decorative surface on one or both sides
Other
Other
Other
Pre-impregnated reinforced fibreglass containing cyanate ester resin or bismaleimide (B) triazine (T) resin mixed with epoxide resin, measuring: -|469,9|mm (±|2|mm)|!x! 622,3|mm (±|2|mm), or -|469,9|mm (±|2|mm)|!x! 414,2|mm (±|2|mm), or -|546,1|mm (±|2|mm)|!x! 622,3|mm (±|2|mm for use in the manufacture of printed circuit boards
Prepreg sheets or rolls containing polyimide resin
Three layered fabric sheet, in rolls, -|comprising a core layer of 100|% Nylon Taffeta or Nylon/Polyester blended Taffeta, -|coated on both sides with polyamide , -|of a total thickness not more than 135|μm, -|of a total weight not more than 80|g/m$2
Glass fiber-reinforced sheets of reactive, halogen-free epoxid resin with hardener, additives and inorganic fillers for use in encapsulating semiconductor systems
Other
Of addition polymerisation products
For use in certain types of aircraft
Other
Heat-, infra- and UV insulating poly(vinyl butyral) film: -|laminated with a metal layer with a thickness of 0,05|mm(±0,01|mm), -|containing by weight 29,75|% or more but not more than 40,25|% of triethyleneglycol di (2-ethyl hexanoate) as plasticizer, -|with a light transmission of 70|% or more (as determined by the ISO 9050|standard); -|with an UV transmission of|1|% or less (as determined by the ISO 9050|standard); -|with a total thickness of 0,43|mm (± 0,043|mm)
Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form
Film, of a specular gloss of 30|or more but not more than 60|measured at an angle of 60|° using a glossmeter (as determined by the ISO 2813:2000|method), consisting of a layer of poly(ethylene terephthalate) and a layer of coloured poly(vinyl chloride), joined by a metallised adhesive coating, for coating panels and doors of a kind used in the manufacture of domestic appliances
Printed laminated sheet -|with a core layer of glass fabric, coated on each side with a layer of poly(vinyl chloride), -|on one side covered with a layer of poly(vinyl fluoride), -|whether or not with a pressure sensitive adhesive layer and a release film on the other side, -|with a toxicity (as determined by test method ABD|0031) of not more than 50|ppm hydrogen fluoride, not more than 85|ppm hydrogen chloride, not more than 10|ppm hydrogen cyanide, not more than 10|ppm nitrogen oxides, not more than 300|ppm carbon monoxide and not more than 10|ppm dihydrogen sulphide and sulphur dioxide taken together, -|with a flammability within 60|seconds of not more than 110|mm (as determined by test method FAR 25|App.F Pt. I Amdt.83), and -|with a weight (without release film) of 490|g/m$2|(±|45|g/m$2) without adhesive layer or of 580|g/m$2|(±|50|g/m$2) with pressure sensitive layer
Other
Other
Roll of polymer-metal laminate comprising: -|a layer of poly(ethylene terephthalate), -|a layer of aluminium, -|a layer of polypropylene, -|with a width of not more than 275|mm, -|a total thickness of not more than 165|μm, and -|conforming to ASTM|D1701-91|and ASTM|D882-95A for use in the manufacture of lithium-ion electric vehicle batteries
Other
Baths, shower-baths, sinks, washbasins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics
Baths, shower-baths, sinks and washbasins
Lavatory seats and covers
Other
Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics
Boxes, cases, crates and similar articles
Photomask or wafer compacts: -|consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties, -|having non porous, abrasion resistant or impact resistant surface properties, -|fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and -|with or without a gasket seal, of a kind used in the photolithography or other semiconductor production to house photomasks or wafers
Boxes, cases, crates and similar articles, of plastic, specially shaped or fitted for the conveyance or packing of semiconductor wafers, masks, or reticles
Other
Sacks and bags (including cones)
Of polymers of ethylene
Of other plastics
Of poly(vinyl chloride)
Other
Carboys, bottles, flasks and similar articles
Of a capacity not exceeding two litres
Of a capacity exceeding two litres
Polyethylene container, for compressed hydrogen: -|with aluminium bosses at both ends, -|wholly embedded in an overwrap of carbon fibres impregnated with epoxide resin, -|of a diameter of 213|mm or more, but not more than 368|mm, -|a length of 860|mm or more, but not more than 1|260|mm and -|a capacity of 18|litres or more, but not more than 50|litres
Other
Spools, cops, bobbins and similar supports
Spools, reels and similar supports for photographic and cinematographic film or for tapes, films and the like of heading|8523
Other
Stoppers, lids, caps and other closures
Caps and capsules for bottles
Other
Other
Tableware, kitchenware, other household articles and hygienic or toilet articles, of plastics
Tableware and kitchenware
Kitchenware containing polyamide or melamine
Consigned from China or Hong Kong
Other
Polycarbonate infant feeding bottles
Other
Other
Ironing boards, including sleeve boards, whether or not free standing, and legs and tops thereof
Other
Builders' ware of plastics, not elsewhere specified or included
Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300|litres
Doors, windows and their frames and thresholds for doors
Shutters, blinds (including venetian blinds) and similar articles and parts thereof
Other
Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings
Trunking, ducting and cable trays for electrical circuits
Other
Other articles of plastics and articles of other materials of headings|3901|to 3914
Office or school supplies
Articles of apparel and clothing accessories (including gloves, mittens and mitts)
Fittings for furniture, coachwork or the like
Plastic cover of the exterior rear-view mirror for motor vehicles with clips
Other
Statuettes and other ornamental articles
Other
Perforated buckets and similar articles used to filter water at the entrance to drains
Other
Made from sheet
For technical uses, for use in civil aircraft
Other
Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material
Other
Other
For technical uses, for use in civil aircraft
Microspheres of a polymer of divinylbenzene, of a diameter of 4,5|µm or more but not more than 80|µm
Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems
Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls
Unexpansible microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate, of a diameter of 3|µm or more but not more than 4,6|µm
Parts of car radio and car air-conditioner front panels -|of acrylonitrile-butadiene-styrene with or without polycarbonate, -|coated with a copper, a nickel and a chrome layers, -|with a total thickness of coating of 5,54|μm or more but not more than 49,6|μm
Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint
Knob of car radio front panel, made of Bisphenol A-based polycarbonate
Flat product of polyethylene, perforated in opposing directions, of a thickness of 600|µm or more but not more than 1|200|µm and of a weight of 21|g/m$2|or more but not more than 42|g/m$2
Sheath contraceptives of polyurethane
Die-cast decoration element made of polycarbonate resin, coated with -|a silver-colour acrylic paint, and -|a transparent scratch-resistant paint of a kind used in the manufacture of car radio front panels
Epoxide resin, containing by weight 70|% or more of silicon dioxide, for the encapsulation of goods of headings|8533, 8535, 8536, 8541, 8542|or 8548
Other
RUBBER AND ARTICLES THEREOF
Natural rubber, balata, gutta-percha, guayule, chicle and similar natural gums, in primary forms or in plates, sheets or strip
Natural rubber latex, whether or not prevulcanised
Natural rubber in other forms
Smoked sheets
Technically specified natural rubber (TSNR)
Other
Balata, gutta-percha, guayule, chicle and similar natural gums
Synthetic rubber and factice derived from oils, in primary forms or in plates, sheets or strip; mixtures of any product of heading|4001|with any product of this heading, in primary forms or in plates, sheets or strip
Styrene-butadiene rubber (SBR); carboxylated styrene-butadiene rubber (XSBR)
Latex
Other
Styrene-butadiene rubber produced by emulsion polymerisation (E-SBR), in bales
Styrene-butadiene-styrene block copolymers produced by solution polymerisation (SBS, thermoplastic elastomers), in granules, crumbs or powders
Styrene-butadiene rubber produced by solution polymerisation (S-SBR), in bales
Other
Butadiene rubber (BR)
Isobutene-isoprene (butyl) rubber (IIR); halo-isobutene-isoprene rubber (CIIR or BIIR)
Isobutene-isoprene (butyl) rubber (IIR)
Other
Chloroprene (chlorobutadiene) rubber (CR)
Latex
Other
Acrylonitrile-butadiene rubber (NBR)
Latex
Other
Isoprene rubber (IR)
Ethylene-propylene-non-conjugated diene rubber (EPDM)
Mixtures of any product of heading|4001|with any product of this heading
Other
Latex
Other
Products modified by the incorporation of plastics
Other
Reclaimed rubber in primary forms or in plates, sheets or strip
Waste, parings and scrap of rubber (other than hard rubber) and powders and granules obtained therefrom
Compounded rubber, unvulcanised, in primary forms or in plates, sheets or strip
Compounded with carbon black or silica
Solutions; dispersions other than those of subheading|4005|10
Other
Plates, sheets and strip
Other
Other forms (for example, rods, tubes and profile shapes) and articles (for example, discs and rings), of unvulcanised rubber
'Camel-back' strips for retreading rubber tyres
Other
Vulcanised rubber thread and cord
Siliconated vulcanised rubber thread and cord
Other
Plates, sheets, strip, rods and profile shapes, of vulcanised rubber other than hard rubber
Of cellular rubber
Plates, sheets and strip
Other
Of non-cellular rubber
Plates, sheets and strip
Floor coverings and mats
Other
Other
Profile shapes, cut to size, for use in civil aircraft
Other
Tubes, pipes and hoses, of vulcanised rubber other than hard rubber, with or without their fittings (for example, joints, elbows, flanges)
Not reinforced or otherwise combined with other materials
Without fittings
With fittings
Suitable for conducting gases or liquids, for use in civil aircraft
Other
Reinforced or otherwise combined only with metal
Without fittings
With fittings
Suitable for conducting gases or liquids, for use in civil aircraft
Other
Reinforced or otherwise combined only with textile materials
Without fittings
With fittings
Suitable for conducting gases or liquids, for use in civil aircraft
Other
Reinforced or otherwise combined with other materials
Without fittings
With fittings
Suitable for conducting gases or liquids, for use in civil aircraft
Rubber brake hose with -|textile strings, -|a wall thickness of 3,2|mm, -|a metal hollow terminal pressed on both ends, and -|one or more mounting brackets, of kind used in the manufacture of goods of Chapter 87
Other
Conveyor or transmission belts or belting, of vulcanised rubber
Conveyor belts or belting
Reinforced only with metal
Reinforced only with textile materials
Other
Transmission belts or belting
Endless transmission belts of trapezoidal cross-section (V-belts), V-ribbed, of an outside circumference exceeding 60|cm but not exceeding 180|cm
Endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, of an outside circumference exceeding 60|cm but not exceeding 180|cm
Endless transmission belts of trapezoidal cross-section (V-belts), V-ribbed, of an outside circumference exceeding 180|cm but not exceeding 240|cm
Endless transmission belts of trapezoidal cross-section (V-belts), other than V-ribbed, of an outside circumference exceeding 180|cm but not exceeding 240|cm
Endless synchronous belts, of an outside circumference exceeding 60|cm but not exceeding 150|cm
Endless synchronous belts, of an outside circumference exceeding 150|cm but not exceeding 198|cm
Other
New pneumatic tyres, of rubber
Of a kind used on motor cars (including station wagons and racing cars)
Of a kind used on buses or lorries
With a load index not exceeding 121
With a load index exceeding 121
Of a kind used on aircraft
For use on civil aircraft
Other
Of a kind used on motorcycles
Of a kind used on bicycles
Other, having a 'herring-bone' or similar tread
Of a kind used on agricultural or forestry vehicles and machines
Of a kind used on construction or industrial handling vehicles and machines and having a rim size not exceeding 61|cm
Of a kind used on construction or industrial handling vehicles and machines and having a rim size exceeding 61|cm
Other
Other
Of a kind used on agricultural or forestry vehicles and machines
Of a kind used on construction or industrial handling vehicles and machines and having a rim size not exceeding 61|cm
Of a kind used on construction or industrial handling vehicles and machines and having a rim size exceeding 61|cm
Other
Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber
Retreaded tyres
Of a kind used on motor cars (including station wagons and racing cars)
Of a kind used on buses or lorries
Of a kind used on aircraft
For use on civil aircraft
Other
Other
Used pneumatic tyres
For use on civil aircraft
Other
Other
Solid or cushion tyres
Tyre treads
Tyre flaps
Inner tubes, of rubber
Of a kind used on motor cars (including station wagons and racing cars), buses or lorries
Of a kind used on bicycles
Other
Hygienic or pharmaceutical articles (including teats), of vulcanised rubber other than hard rubber, with or without fittings of hard rubber
Sheath contraceptives
Other
Articles of apparel and clothing accessories (including gloves, mittens and mitts), for all purposes, of vulcanised rubber other than hard rubber
Gloves, mittens and mitts
Surgical
Other
Other
Other articles of vulcanised rubber other than hard rubber
Of cellular rubber
For technical uses, for use in civil aircraft
Other
Other
Floor coverings and mats
Erasers
Gaskets, washers and other seals
For technical uses, for use in civil aircraft
Gasket made of vulcanised rubber (ethylene-propylene-diene monomers), with permissible outflow of the material in the place of mold split of not more than 0,25|mm, in the shape of a rectangle: -|with a length of 72|mm or more but not more than 825|mm; -|with a width of 18|mm or more but not more than 155|mm
Other
Boat or dock fenders, whether or not inflatable
Other inflatable articles
Other
For motor vehicles of headings|8701|to 8705
Rubber-to-metal bonded parts
Other
Other
Rubber-to-metal bonded parts
For technical uses, for use in civil aircraft
Other
Other
For technical uses, for use in civil aircraft
Soft rubber sealing stoppers for the manufacture of electrolytic capacitors
Tyre moulding bladder
Other
Hard rubber (for example, ebonite) in all forms, including waste and scrap; articles of hard rubber
RAW HIDES AND SKINS (OTHER THAN FURSKINS) AND LEATHER
Raw hides and skins of bovine (including buffalo) or equine animals (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment-dressed or further prepared), whether or not dehaired or split
Whole hides and skins, unsplit, of a weight per skin not exceeding 8|kg when simply dried, 10|kg when dry-salted, or 16|kg when fresh, wet-salted or otherwise preserved
Fresh
Wet-salted
Dried or dry-salted
Other
Whole hides and skins, of a weight exceeding 16|kg
Fresh
Wet-salted
Dried or dry-salted
Other
Other, including butts, bends and bellies
Raw skins of sheep or lambs (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment-dressed or further prepared), whether or not with wool on or split, other than those excluded by note|1(c) to this chapter
With wool on
Of lambs
Other
Without wool on
Pickled
Other
Other raw hides and skins (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment-dressed or further prepared), whether or not dehaired or split, other than those excluded by note|1(b) or 1(c) to this chapter
Of reptiles
Of swine
Other
Tanned or crust hides and skins of bovine (including buffalo) or equine animals, without hair on, whether or not split, but not further prepared
In the wet state (including wet-blue)
Full grains, unsplit; grain splits
Whole bovine (including buffalo) hides and skins, of a unit surface area not exceeding 28|square feet (2,6|m$2)
Other
Of bovine (including buffalo) animals
Whole hides and skins, of a unit surface area exceeding 28|square feet (2,6|m$2)
Other
Other
Other
Whole bovine (including buffalo) hides and skins, of a unit surface area not exceeding 28|square feet (2,6|m$2)
Other
Of bovine (including buffalo) animals
Whole hides and skins, of a unit surface area exceeding 28|square feet (2,6|m$2)
Other
Other
In the dry state (crust)
Full grains, unsplit; grain splits
Whole bovine (including buffalo) hides and skins, of a unit surface area not exceeding 28|square feet (2,6|m$2)
East India kip, whole, whether or not the heads and legs have been removed, each of a net weight of not more than 4,5|kg, not further prepared than vegetable tanned, whether or not having undergone certain treatments, but obviously unsuitable for immediate use for the manufacture of leather articles
Other
Buffalo leather, split, chrome tanned synthetic retanned ("crust"), dry
Other
Other
Of bovine (including buffalo) animals
Whole hides and skins, of a unit surface area exceeding 28|square feet (2,6|m$2)
Crust leather of zebu species or zebu-hybrid species with a unit surface area of more than|2,6|m$2|and containing a hump hole|of 450|cm$2|or more but not more than 2850|cm$2, for use in the manufacture of raw material for seat covers of motor vehicles
Other
Other
Other
Other
Whole bovine (including buffalo) hides and skins, of a unit surface area not exceeding 28|square feet (2,6|m$2)
East India kip, whole, whether or not the heads and legs have been removed, each of a net weight of not more than 4,5|kg, not further prepared than vegetable tanned, whether or not having undergone certain treatments, but obviously unsuitable for immediate use for the manufacture of leather articles
Other
Other
Of bovine (including buffalo) animals
Whole hides and skins, of a unit surface area exceeding 28|square feet (2,6|m$2)
Other
Other
Tanned or crust skins of sheep or lambs, without wool on, whether or not split, but not further prepared
In the wet state (including wet-blue)
In the dry state (crust)
Vegetable pre-tanned Indian hair sheep, whether or not having undergone certain treatments, but obviously unsuitable for immediate use for the manufacture of leather articles
Other
Tanned or crust hides and skins of other animals, without wool or hair on, whether or not split, but not further prepared
Of goats or kids
In the wet state (including wet-blue)
In the dry state (crust)
Vegetable pre-tanned Indian goat or kid, whether or not having undergone certain treatments, but obviously unsuitable for immediate use for the manufacture of leather articles
Other
Of swine
In the wet state (including wet-blue)
Not split
Split
In the dry state (crust)
Of reptiles
Vegetable pre-tanned
Other
Other
In the wet state (including wet-blue)
In the dry state (crust)
Leather further prepared after tanning or crusting, including parchment-dressed leather, of bovine (including buffalo) or equine animals, without hair on, whether or not split, other than leather of heading|4114
Whole hides and skins
Full grains, unsplit
Bovine (including buffalo) leather, of a unit surface area not exceeding 28|square feet (2,6|m$2)
Boxcalf
Other
Other
Grain splits
Bovine (including buffalo) leather, of a unit surface area not exceeding 28|square feet (2,6|m$2)
Boxcalf
Other
Other
Bovine (including buffalo) leather
Equine leather
Other
Bovine (including buffalo) leather, of a unit surface area not exceeding 28|square feet (2,6|m$2)
Other
Other, including sides
Full grains, unsplit
Sole leather
Other
Grain splits
Bovine (including buffalo) leather
Equine leather
Other
Bovine (including buffalo) leather
Equine leather
Leather further prepared after tanning or crusting, including parchment-dressed leather, of sheep or lamb, without wool on, whether or not split, other than leather of heading|4114
Leather further prepared after tanning or crusting, including parchment-dressed leather, of other animals, without wool or hair on, whether or not split, other than leather of heading|4114
Of goats or kids
Of swine
Of reptiles
Other
Chamois (including combination chamois) leather; patent leather and patent laminated leather; metallised leather
Chamois (including combination chamois) leather
Of sheep or lambs
Of other animals
Patent leather and patent laminated leather; metallised leather
Composition leather with a basis of leather or leather fibre, in slabs, sheets or strip, whether or not in rolls; parings and other waste of leather or of composition leather, not suitable for the manufacture of leather articles; leather dust, powder and flour
Composition leather with a basis of leather or leather fibre, in slabs, sheets or strip, whether or not in rolls
Parings and other waste of leather or of composition leather, not suitable for the manufacture of leather articles; leather dust, powder and flour
ARTICLES OF LEATHER; SADDLERY AND HARNESS; TRAVEL GOODS, HANDBAGS AND SIMILAR CONTAINERS; ARTICLES OF ANIMAL GUT (OTHER THAN SILKWORM GUT)
Saddlery and harness for any animal (including traces, leads, knee pads, muzzles, saddle-cloths, saddlebags, dog coats and the like), of any material
Riding saddles, of leather, hand-made
Other
Trunks, suitcases, vanity cases, executive-cases, briefcases, school satchels, spectacle cases, binocular cases, camera cases, musical instrument cases, gun cases, holsters and similar containers; travelling-bags, insulated food or beverages bags, toilet bags, rucksacks, handbags, shopping-bags, wallets, purses, map-cases, cigarette-cases, tobacco-pouches, tool bags, sports bags, bottle-cases, jewellery boxes, powder boxes, cutlery cases and similar containers, of leather or of composition leather, of sheeting of plastics, of textile materials, of vulcanised fibre or of paperboard, or wholly or mainly covered with such materials or with paper
Trunks, suitcases, vanity cases, executive-cases, briefcases, school satchels and similar containers
With outer surface of leather or of composition leather
Executive-cases, briefcases, school satchels and similar containers
Hand-made
Other
Other
Hand-made
Other
With outer surface of plastics or of textile materials
In the form of plastic sheeting
Executive-cases, briefcases, school satchels and similar containers
Other
Of moulded plastic material
Of other materials, including vulcanised fibre
Executive-cases, briefcases, school satchels and similar containers
Hand-made
Other
Other
Hand-made
Other
Other
Of aluminium
Of other materials
Hand-made
Other
Handbags, whether or not with shoulder strap, including those without handle
With outer surface of leather or of composition leather
Hand-made
Other
With outer surface of plastic sheeting or of textile materials
Of plastic sheeting
Of textile materials
Hand-made
Other
Other
Articles of a kind normally carried in the pocket or in the handbag
With outer surface of leather or of composition leather
Hand-made
Other
With outer surface of plastic sheeting or of textile materials
Of plastic sheeting
Of textile materials
Hand-made
Other
Other
Hand-made
Other
Other
With outer surface of leather or of composition leather
Travelling-bags, toilet bags, rucksacks and sports bags
Hand-made
Other
Other
Hand-made
Other
With outer surface of plastic sheeting or of textile materials
Of plastic sheeting
Travelling-bags, toilet bags, rucksacks and sports bags
Musical instrument cases
Other
Of textile materials
Travelling-bags, toilet bags, rucksacks and sports bags
Hand-made
Other
Other
Hand-made
Other
Other
Musical instrument cases, hand-made
Other
Articles of apparel and clothing accessories, of leather or of composition leather
Articles of apparel
Gloves, mittens and mitts
Specially designed for use in sports
Other
Protective for all trades
Other
Belts and bandoliers
Hand-made
Other
Other clothing accessories
Hand-made
Other
Other articles of leather or of composition leather
Of a kind used in machinery or mechanical appliances or for other technical uses
Conveyor or transmission belts or belting
Other
Other
Articles of gut (other than silkworm gut), of goldbeater's skin, of bladders or of tendons
FURSKINS AND ARTIFICIAL FUR; MANUFACTURES THEREOF
Raw furskins (including heads, tails, paws and other pieces or cuttings, suitable for furriers' use), other than raw hides and skins of heading|4101, 4102|or 4103
Of mink, whole, with or without head, tail or paws
Of lamb, the following: Astrakhan, Broadtail, Caracul, Persian and similar lamb, Indian, Chinese, Mongolian or Tibetan lamb, whole, with or without head, tail or paws
Of fox, whole, with or without head, tail or paws
Other furskins, whole, with or without head, tail or paws
Heads, tails, paws and other pieces or cuttings, suitable for furriers' use
Tanned or dressed furskins (including heads, tails, paws and other pieces or cuttings), unassembled, or assembled (without the addition of other materials) other than those of heading|4303
Whole skins, with or without head, tail or paws, not assembled
Of mink
Other
Of beaver, muskrat or fox
Of rabbit or hare
Of seal
Of whitecoat pups of harp seal or of pups of hooded seal (blue-backs)
Other
Of sheep or lambs
Of lamb, the following: Astrakhan, Broadtail, Caracul, Persian and similar lamb, Indian, Chinese, Mongolian or Tibetan lamb
Other
Other
Heads, tails, paws and other pieces or cuttings, not assembled
Whole skins and pieces or cuttings thereof, assembled
'Dropped' furskins
Other
Of rabbit or hare
Of seal
Of whitecoat pups of harp seal or of pups of hooded seal (blue-backs)
Other
Other
Articles of apparel, clothing accessories and other articles of furskin
Articles of apparel and clothing accessories
Of furskins of whitecoat pups of harp seal or of pups of hooded seal (blue-backs)
Other
Other
Artificial fur and articles thereof
WOOD AND ARTICLES OF WOOD; WOOD CHARCOAL
Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms; wood in chips or particles; sawdust and wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms
Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms
Wood in chips or particles
Coniferous
Non-coniferous
Sawdust and wood waste and scrap, whether or not agglomerated in logs, briquettes, pellets or similar forms
Wood pellets
Other
Agglomerated (for example, briquettes)
Other
Sawdust
Other
Wood charcoal (including shell or nut charcoal), whether or not agglomerated
Of bamboo
Exported from Somalia
Other
Other
Exported from Somalia
Other
Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared
Treated with paint, stains, creosote or other preservatives
Other, coniferous
Spruce of the species Picea abies Karst. or silver fir (Abies alba Mill.)
Sawlogs
Exported from the Russian Federation in accordance with Commission regulation No 498/2012
Other
Other
Exported from the Russian Federation in accordance with Commission regulation No 498/2012
Other
Pine of the species Pinus sylvestris L.
Sawlogs
Exported from the Russian Federation in accordance with Commission regulation No 498/2012
Other
Other
Exported from the Russian Federation in accordance with Commission regulation No 498/2012
Other
Other
Sawlogs
Other
Other, of tropical wood specified in subheading note|2|to this chapter
Dark red meranti, light red meranti and meranti bakau
Other
Acajou d'Afrique, iroko and sapelli
Okoumé and sipo
Other
Other
Of oak (Quercus spp.)
Sawlogs
Other
Of beech (Fagus spp.)
Sawlogs
Other
Other
Of poplar
Of eucalyptus
Of birch
Sawlogs
Other
Other
Hoopwood; split poles; piles, pickets and stakes of wood, pointed but not sawn lengthwise; wooden sticks, roughly trimmed but not turned, bent or otherwise worked, suitable for the manufacture of walking sticks, umbrellas, tool handles or the like; chipwood and the like
Coniferous
Chipwood and the like
Other
Non-coniferous
Chipwood and the like
Chipwood
Other
Other
Wood wool; wood flour
Railway or tramway sleepers (cross-ties) of wood
Not impregnated
Other
Wood sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6|mm
Coniferous
Sanded; end-jointed, whether or not planed or sanded
Other
Planed
Spruce of the species Picea abies Karst. or silver fir (Abies alba Mill.)
Pine of the species Pinus sylvestris L.
Other
Other
Spruce of the species Picea abies Karst. or silver fir (Abies alba Mill.)
Pine of the species Pinus sylvestris L.
Other
Of tropical wood specified in subheading note|2|to this chapter
Mahogany (Swietenia spp.)
Sanded; end-jointed, whether or not planed or sanded
Other
Planed
Other
Virola, imbuia and balsa
Sanded; end-jointed, whether or not planed or sanded
Other
Planed
Other
Dark red meranti, light red meranti and meranti bakau
End-jointed, whether or not planed or sanded
Other
Planed
Sanded
Other
White lauan, white meranti, white seraya, yellow meranti and alan
End-jointed, whether or not planed or sanded
Other
Planed
Sanded
Other
Sapelli
Sanded; end-jointed, whether or not planed or sanded
Other
Planed
Other
Iroko
Sanded; end-jointed, whether or not planed or sanded
Other
Planed
Other
Other
End-jointed, whether or not planed or sanded
Other
Acajou d'Afrique, azobé, dibétou, ilomba, jelutong, jongkong, kapur, kempas, keruing, limba, makoré, mansonia, merbau, obeche, okoumé, palissandre de Rio, palissandre de Para, palissandre de Rose, ramin, sipo, teak and tiama
Planed
Palissandre de Para, palissandre de Rio and palissandre de Rose
Other
Sanded
Other
Other
Planed
Sanded
Other
Other
Of oak (Quercus spp.)
Sanded; end-jointed, whether or not planed or sanded
Other
Planed
Blocks, strips and friezes for parquet or wood block flooring, not assembled
Other
Other
Of beech (Fagus spp.)
Planed, sanded or end-jointed
Other
Of maple (Acer spp.)
Planed; end-jointed, whether or not planed or sanded
Other
Sanded
Other
Of cherry (Prunus spp.)
Planed; end-jointed, whether or not planed or sanded
Other
Sanded
Other
Of ash (Fraxinus spp.)
Planed; end-jointed, whether or not planed or sanded
Other
Sanded
Other
Other
Planed; end-jointed, whether or not planed or sanded
Other
Sanded
Other
Of poplar
Of tropical wood
Other
Sheets for veneering (including those obtained by slicing laminated wood), for plywood or for similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not planed, sanded, spliced or end-jointed, of a thickness not exceeding 6|mm
Coniferous
Planed; sanded; end-jointed, whether or not planed or sanded
Other
Small boards for the manufacture of pencils
Other
Of tropical wood specified in subheading note|2|to this chapter
Dark red meranti, light red meranti and meranti bakau
End-jointed, whether or not planed or sanded
Other
Planed
Sanded
Other
Other
Acajou d'Afrique, limba, mahogany (Swietenia spp.), obeche, okoumé, palissandre de Para, palissandre de Rio, palissandre de Rose, sapelli, sipo, virola and white lauan
Sanded; end-jointed, whether or not planed or sanded
Other
Planed
Other
Okoume veneer sheets: -|of a length of 1|270|mm or more, but not more than 3|200|mm, -|of|a width of 150|mm or more, but not more than 2|000|mm, -|of a thickness of 0,5|mm or more, but not more than 4|mm, -|not sanded and -|not planed
Other
Other
Planed; sanded; end-jointed, whether or not planed or sanded
Other
Small boards for the manufacture of pencils
Other
Of a thickness not exceeding 1|mm
Of a thickness exceeding 1|mm
Other
Planed; sanded; end-jointed, whether or not planed or sanded
Other
Small boards for the manufacture of pencils
Other
Of a thickness not exceeding 1|mm
Of a thickness exceeding 1|mm
Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, moulded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed
Coniferous
Mouldings for frames for paintings, photographs, mirrors or similar objects
Other
Non-coniferous
Of bamboo
Other
Mouldings for frames for paintings, photographs, mirrors or similar objects
Other
Blocks, strips and friezes for parquet or wood block flooring, not assembled
Other
Particle board, oriented strand board (OSB) and similar board (for example, waferboard) of wood or other ligneous materials, whether or not agglomerated with resins or other organic binding substances
Of wood
Particle board
Unworked or not further worked than sanded
Surface-covered with melamine-impregnated paper
Surface-covered with decorative laminates of plastics
Other
Oriented strand board (OSB)
Unworked or not further worked than sanded
Other
Other
Other
Fibreboard of wood or other ligneous materials, whether or not bonded with resins or other organic substances
Medium density fibreboard (MDF)
Of a thickness not exceeding 5|mm
Not mechanically worked or surface covered
Other
Of a thickness exceeding 5|mm but not exceeding 9|mm
Not mechanically worked or surface covered
Other
Of a thickness exceeding 9|mm
Not mechanically worked or surface covered
Other
Other
Of a density exceeding 0,8|g/cm$3
Not mechanically worked or surface covered
Other
Of a density exceeding 0,5|g/cm$3|but not exceeding 0,8|g/cm$3
Not mechanically worked or surface covered
Other
Of a density not exceeding 0,5|g/cm$3
Not mechanically worked or surface covered
Other
Plywood, veneered panels and similar laminated wood
Of bamboo
Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6|mm thickness
With at least one outer ply of tropical wood specified in subheading note|2|to this chapter
Of acajou d'Afrique, dark red meranti, light red meranti, limba, mahogany (Swietenia spp.), obeche, okoumé, palissandre de Para, palissandre de Rio, palissandre de Rose, sapelli, sipo, virola or white lauan
With at least one outer ply of okoumé not coated by a permanent film of other materials
Other
Other
Other, with at least one outer ply of non-coniferous wood
Of alder, ash, beech, birch, cherry, chestnut, elm, hickory, hornbeam, horse chestnut, lime, maple, oak, plane tree, poplar, robinia, walnut or yellow poplar
Other
Other
Plywood of coniferous species, without the addition of other substances, of a thickness greater than 18,5 mm when sanded, or of a thickness greater than 8,5 mm when the faces are not further prepared than the peeling process
Other
Other
Blockboard, laminboard and battenboard
With at least one outer ply of non-coniferous wood
Other
Other
Containing at least one layer of particle board
Other
With at least one outer ply of non-coniferous wood
Of alder, ash, beech, birch, cherry, chestnut, elm, hickory, hornbeam, horse chestnut, lime, maple, oak, plane tree, poplar, robinia, walnut or yellow poplar
Other
Other
Plywood of coniferous species, without the addition of other substances,of a thickness greater than 18,5 mm when sanded, or of a thickness greater than 8,5 mm when the faces are not further prepared than the peeling process
Other
Densified wood, in blocks, plates, strips or profile shapes
Wooden frames for paintings, photographs, mirrors or similar objects
Of tropical wood specified in additional note|2|to this chapter
Of other wood
Packing cases, boxes, crates, drums and similar packings, of wood; cable-drums of wood; pallets, box pallets and other load boards, of wood; pallet collars of wood
Cases, boxes, crates, drums and similar packings; cable-drums
Cases, boxes, crates, drums and similar packings
Cable-drums
Pallets, box pallets and other load boards; pallet collars
Flat pallets; pallet collars
Other
Casks, barrels, vats, tubs and other coopers' products and parts thereof, of wood, including staves
Tools, tool bodies, tool handles, broom or brush bodies and handles, of wood; boot or shoe lasts and trees, of wood
Builders' joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes
Windows, French windows and their frames
Of tropical wood specified in additional note|2|to this chapter
Coniferous
Of other wood
Doors and their frames and thresholds
Of tropical wood specified in additional note|2|to this chapter
Coniferous
Of other wood
Shuttering for concrete constructional work
Shingles and shakes
Posts and beams
Assembled flooring panels
For mosaic floors
Other, multilayer
Other
Other
Glue-laminated timber
Other
Tableware and kitchenware, of wood
Of tropical wood specified in additional note|2|to this chapter
Of other wood
Wood marquetry and inlaid wood; caskets and cases for jewellery or cutlery, and similar articles, of wood; statuettes and other ornaments, of wood; wooden articles of furniture not falling in Chapter|94
Statuettes and other ornaments, of wood
Of tropical wood specified in additional note|2|to this chapter
Hand-made
Other
Of other wood
Other
Wood marquetry and inlaid wood
Other
Of tropical wood specified in additional note|2|to this chapter
Hand-made
Wood in the form of logs or squared logs with simple process in the surface, carved or ginely threaded or painted, does not have significant added-value and no significant change in shape
Other
Other
Wood in the form of logs or squared logs with simple process in the surface, carved or ginely threaded or painted, does not have significant added-value and no significant change in shape
Other
Other
Wood in the form of logs or squared logs with simple process in the surface, carved or ginely threaded or painted, does not have significant added-value and no significant change in shape
Other
Other articles of wood
Clothes hangers
Other
Of fibreboard
Other
Coffins
Other
Ironing boards, including sleeve boards, whether or not free standing, and legs and tops thereof
Other
Wood in the form of logs or squared logs with simple process in the surface, carved or ginely threaded or painted, does not have significant added-value and no significant change in shape
Other
CORK AND ARTICLES OF CORK
Natural cork, raw or simply prepared; waste cork; crushed, granulated or ground cork
Natural cork, raw or simply prepared
Other
Natural cork, debacked or roughly squared, or in rectangular (including square) blocks, plates, sheets or strip (including sharp-edged blanks for corks or stoppers)
Articles of natural cork
Corks and stoppers
Cylindrical
Other
Other
Agglomerated cork (with or without a binding substance) and articles of agglomerated cork
Blocks, plates, sheets and strip; tiles of any shape; solid cylinders, including discs
Corks and stoppers
For sparkling wine, including those with discs of natural cork
Other
Other
With a binding substance
Other
Other
Corks and stoppers
Other
Gaskets, washers and other seals, for use in civil aircraft
Other
MANUFACTURES OF STRAW, OF ESPARTO OR OF OTHER PLAITING MATERIALS; BASKETWARE AND WICKERWORK
Plaits and similar products of plaiting materials, whether or not assembled into strips; plaiting materials, plaits and similar products of plaiting materials, bound together in parallel strands or woven, in sheet form, whether or not being finished articles (for example, mats, matting, screens)
Mats, matting and screens of vegetable materials
Of bamboo
Of plaits or similar products of plaiting materials
Other
Of rattan
Of plaits or similar products of plaiting materials
Other
Other
Of plaits or similar products of plaiting materials
Other
Other
Of bamboo
Plaits and similar products of plaiting materials, whether or not assembled into strips
Other
Of plaits or similar products of plaiting materials
Other
Of rattan
Plaits and similar products of plaiting materials, whether or not assembled into strips
Other
Of plaits or similar products of plaiting materials
Other
Of other vegetable materials
Plaits and similar products of plaiting materials, whether or not assembled into strips
Other
Of plaits or similar products of plaiting materials
Other
Other
Plaits and similar products of plaiting materials, whether or not assembled into strips
Other
Of plaits or similar products of plaiting materials
Other
Basketwork, wickerwork and other articles, made directly to shape from plaiting materials or made up from goods of heading|4601; articles of loofah
Of vegetable materials
Of bamboo
From plaiting materials, hand-made
Other
Of rattan
From plaiting materials, hand-made
Other
Other
Straw envelopes for bottles
Other
Hand-made
Other
Other
PULP OF WOOD OR OF OTHER FIBROUS CELLULOSIC MATERIAL; RECOVERED (WASTE AND SCRAP) PAPER OR PAPERBOARD
Mechanical wood pulp
Thermo-mechanical wood pulp
Other
Chemical wood pulp, dissolving grades
Chemical wood pulp, soda or sulphate, other than dissolving grades
Unbleached
Coniferous
Non-coniferous
Semi-bleached or bleached
Coniferous
Non-coniferous
Chemical wood pulp, sulphite, other than dissolving grades
Unbleached
Coniferous
Non-coniferous
Semi-bleached or bleached
Coniferous
Non-coniferous
Wood pulp obtained by a combination of mechanical and chemical pulping processes
Pulps of fibres derived from recovered (waste and scrap) paper or paperboard or of other fibrous cellulosic material
Cotton linters pulp
Pulps of fibres derived from recovered (waste and scrap) paper or paperboard
Other, of bamboo
Other
Mechanical
Chemical
Obtained by a combination of mechanical and chemical processes
Recovered (waste and scrap) paper or paperboard
Unbleached kraft paper or paperboard or corrugated paper or paperboard
Other paper or paperboard made mainly of bleached chemical pulp, not coloured in the mass
Paper or paperboard made mainly of mechanical pulp (for example, newspapers, journals and similar printed matter)
Old and unsold newspapers and magazines, telephone directories, brochures and printed advertising material
Other
Other, including unsorted waste and scrap
Unsorted
Sorted
PAPER AND PAPERBOARD; ARTICLES OF PAPER PULP, OF PAPER OR OF PAPERBOARD
Newsprint, in rolls or sheets
Uncoated paper and paperboard, of a kind used for writing, printing or other graphic purposes, and non-perforated punchcards and punch-tape paper, in rolls or rectangular (including square) sheets, of any size, other than paper of heading|4801|or 4803; handmade paper and paperboard
Handmade paper and paperboard
Paper and paperboard of a kind used as a base for photosensitive, heat-sensitive or electrosensitive paper or paperboard
Wallpaper base
Not containing fibres obtained by a mechanical process or of which not more than 10|% by weight of the total fibre content consists of such fibres
Other
Other paper and paperboard, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10|% by weight of the total fibre content consists of such fibres
Weighing less than 40|g/m$2
Weighing 40|g/m$2|or more but not more than 150|g/m$2, in rolls
Weighing 40|g/m$2|or more but less than 60|g/m$2
Weighing 60|g/m$2|or more but less than 75|g/m$2
Weighing 75|g/m$2|or more but less than 80|g/m$2
Weighing 80|g/m$2|or more
Weighing 40|g/m$2|or more but not more than 150|g/m$2, in sheets with one side not exceeding 435|mm and the other side not exceeding 297|mm in the unfolded state
With one side measuring 297|mm and the other side measuring 210|mm (A4|format)
Other
Other, weighing 40|g/m$2|or more but not more than 150|g/m$2
Weighing more than 150|g/m$2
In rolls
Other
Other paper and paperboard, of which more than 10|% by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process
In rolls
Weighing less than 72|g/m$2|and of which more than 50|% by weight of the total fibre content consists of fibres obtained by a mechanical process
Other
In sheets with one side not exceeding 435|mm and the other side not exceeding 297|mm in the unfolded state
Other
Toilet or facial tissue stock, towel or napkin stock and similar paper of a kind used for household or sanitary purposes, cellulose wadding and webs of cellulose fibres, whether or not creped, crinkled, embossed, perforated, surface-coloured, surface-decorated or printed, in rolls or sheets
Cellulose wadding
Creped paper and webs of cellulose fibres (tissues), weighing, per ply
Not more than 25|g/m$2
More than 25|g/m$2
Other
Uncoated kraft paper and paperboard, in rolls or sheets, other than that of heading|4802|or 4803
Kraftliner
Unbleached
Of which not less than 80|% by weight of the total fibre content consists of coniferous fibres obtained by the chemical sulphate or soda process
Weighing less than 150|g/m$2
Weighing 150|g/m$2|or more but less than 175|g/m$2
Weighing 175|g/m$2|or more
Other
Other
Of which not less than 80|% by weight of the total fibre content consists of coniferous fibres obtained by the chemical sulphate or soda process
Composed of one or more layers unbleached and an outside layer bleached, semi-bleached or coloured, weighing per m$2
Less than 175|g
175|g or more
Other
Other
Sack kraft paper
Unbleached
Of which not less than 80|% by weight of the total fibre content consists of coniferous fibres obtained by the chemical sulphate or soda process
Other
Other
Of which not less than 80|% by weight of the total fibre content consists of coniferous fibres obtained by the chemical sulphate or soda process
Other
Other kraft paper and paperboard weighing 150|g/m$2|or less
Unbleached
Of which not less than 80|% by weight of the total fibre content consists of coniferous fibres obtained by the chemical sulphate or soda process
Kraft electro-technical insulating paper
Other
Other
Other
Of which not less than 80|% by weight of the total fibre content consists of coniferous fibres obtained by the chemical sulphate or soda process
Bleached uniformly throughout the mass
Other
Other
Other kraft paper and paperboard weighing more than 150|g/m$2|but less than 225|g/m$2
Unbleached
Saturating kraft
Other
Bleached uniformly throughout the mass and of which more than 95|% by weight of the total fibre content consists of wood fibres obtained by a chemical process
Other
Other kraft paper and paperboard weighing 225|g/m$2|or more
Unbleached
Bleached uniformly throughout the mass and of which more than 95|% by weight of the total fibre content consists of wood fibres obtained by a chemical process
Other
Of which not less than 80|% by weight of the total fibre content consists of coniferous fibres obtained by the chemical sulphate or soda process
Other
Other uncoated paper and paperboard, in rolls or sheets, not further worked or processed than as specified in note|3|to this chapter
Fluting paper
Semi-chemical fluting paper
Straw fluting paper
Other
Wellenstoff
Other
Testliner (recycled liner board)
Weighing 150|g/m$2|or less
Weighing more than 150|g/m$2
Sulphite wrapping paper
Filter paper and paperboard
Felt paper and paperboard
Other
Weighing 150|g/m$2|or less
Weighing more than 150|g/m$2|but less than 225|g/m$2
Weighing 225|g/m$2|or more
Made from recovered paper
Other
Vegetable parchment, greaseproof papers, tracing papers and glassine and other glazed transparent or translucent papers, in rolls or sheets
Vegetable parchment
Greaseproof papers
Tracing papers
Glassine and other glazed transparent or translucent papers
Glassine papers
Other
Composite paper and paperboard (made by sticking flat layers of paper or paperboard together with an adhesive), not surface-coated or impregnated, whether or not internally reinforced, in rolls or sheets
Made from recovered paper, whether or not covered with paper
Other
Paper and paperboard, corrugated (with or without glued flat surface sheets), creped, crinkled, embossed or perforated, in rolls or sheets, other than paper of the kind described in heading|4803
Corrugated paper and paperboard, whether or not perforated
Kraft paper, creped or crinkled, whether or not embossed or perforated
Other
Carbon paper, self-copy paper and other copying or transfer papers (including coated or impregnated paper for duplicator stencils or offset plates), whether or not printed, in rolls or sheets
Self-copy paper
Other
Lightweight thermal paper weighing 65 gr/m² or less; in rolls of a width of 20 cm or more, a weight of the roll (including the paper) of 50 kg or more and a diameter of the roll (including the paper) of 40 cm or more (‘jumbo rolls’); with or without a base coat on one or both sides; coated with a thermosensitive substance on one or both sides; and with or without a top coat
Other
Paper and paperboard, coated on one or both sides with kaolin (China clay) or other inorganic substances, with or without a binder, and with no other coating, whether or not surface-coloured, surface-decorated or printed, in rolls or rectangular (including square) sheets, of any size
Paper and paperboard of a kind used for writing, printing or other graphic purposes, not containing fibres obtained by a mechanical or chemi-mechanical process or of which not more than 10|% by weight of the total fibre content consists of such fibres
In rolls
With a weight of 70|g/m2 or more but not more than 400|g/m2 and brightness of more than 84 (measured according to ISO 2470-1), excluding multi-ply paper and multi-ply paperboard and excluding rolls suitable for use in web-fed presses
Other
In sheets with one side not exceeding 435|mm and the other side not exceeding 297|mm in the unfolded state
With a weight of 70|g/m2 or more but not more than 400|g/m2 and brightness of more than 84 (measured according to ISO 2470-1), excluding multi-ply paper and multi-ply paperboard
Other
Other
With a weight of 70|g/m2 or more but not more than 400|g/m2 and brightness of more than 84 (measured according to ISO 2470-1), excluding multi-ply paper and multi-ply paperboard
Other
Paper and paperboard of a kind used for writing, printing or other graphic purposes, of which more than 10|% by weight of the total fibre content consists of fibres obtained by a mechanical or chemi-mechanical process
Lightweight coated paper
With a weight of 70|g/m2 or more but not more than 400|g/m2 and brightness of more than 84 (measured according to ISO 2470-1), excluding multi-ply paper and multi-ply paperboard and excluding rolls suitable for use in web-fed presses
Other
Other
In rolls
With a weight of 70|g/m2 or more but not more than 400|g/m2 and brightness of more than 84 (measured according to ISO 2470-1), excluding multi-ply paper and multi-ply paperboard and excluding rolls suitable for use in web-fed presses
Other
Other
With a weight of 70|g/m2 or more but not more than 400|g/m2 and brightness of more than 84 (measured according to ISO 2470-1), excluding multi-ply paper and multi-ply paperboard
Other
Kraft paper and paperboard, other than that of a kind used for writing, printing or other graphic purposes
Bleached uniformly throughout the mass and of which more than 95|% by weight of the total fibre content consists of wood fibres obtained by a chemical process, and weighing 150|g/m$2|or less
Bleached uniformly throughout the mass and of which more than 95|% by weight of the total fibre content consists of wood fibres obtained by a chemical process, and weighing more than 150|g/m$2
Coated with kaolin
Other
Other
Other paper and paperboard
Multi-ply
Each layer bleached
With only one outer layer bleached
Other
Other
Bleached paper and paperboard, coated with kaolin
With a weight of 70|g/m2 or more but not more than 400|g/m2 and brightness of more than 84 (measured according to ISO 2470-1), excluding rolls suitable for use in web-fed presses
Other
Other
With a weight of 70|g/m2 or more but not more than 400|g/m2 and brightness of more than 84 (measured according to ISO 2470-1), excluding rolls suitable for use in web-fed presses
Other
Paper, paperboard, cellulose wadding and webs of cellulose fibres, coated, impregnated, covered, surface-coloured, surface-decorated or printed, in rolls or rectangular (including square) sheets, of any size, other than goods of the kind described in heading|4803, 4809|or 4810
Tarred, bituminised or asphalted paper and paperboard
Gummed or adhesive paper and paperboard
Self-adhesive
Of a width not exceeding 10|cm, the coating of which consists of unvulcanised natural or synthetic rubber
Other
Other
Paper and paperboard, coated, impregnated or covered with plastics (excluding adhesives)
Bleached, weighing more than 150|g/m$2
Other
Paper and paperboard, coated, impregnated or covered with wax, paraffin wax, stearin, oil or glycerol
Other paper, paperboard, cellulose wadding and webs of cellulose fibres
Lightweight thermal paper weighing 65 gr/m² or less; in rolls of a width of 20 cm or more, a weight of the roll (including the paper) of 50 kg or more and a diameter of the roll (including the paper) of 40 cm or more (‘jumbo rolls’); with or without a base coat on one or both sides; coated with a thermosensitive substance on one or both sides; and with or without a top coat
Other
Filter blocks, slabs and plates, of paper pulp
Cigarette paper, whether or not cut to size or in the form of booklets or tubes
In the form of booklets or tubes
In rolls of a width not exceeding 5|cm
Other
In rolls of a width exceeding 5|cm but not exceeding 15|cm
Other
Wallpaper and similar wallcoverings; window transparencies of paper
Wallpaper and similar wallcoverings, consisting of paper coated or covered, on the face side, with a grained, embossed, coloured, design-printed or otherwise decorated layer of plastics
Other
Wallpaper and similar wallcoverings, consisting of grained, embossed, surface-coloured, design-printed or otherwise surface-decorated paper, coated or covered with transparent protective plastics
Other
Carbon paper, self-copy paper and other copying or transfer papers (other than those of heading|4809), duplicator stencils and offset plates, of paper, whether or not put up in boxes
Self-copy paper
Other
Lightweight thermal paper weighing 65 gr/m² or less; in rolls of a width of 20 cm or more, a weight of the roll (including the paper) of 50 kg or more and a diameter of the roll (including the paper) of 40 cm or more (‘jumbo rolls’); with or without a base coat on one or both sides; coated with a thermosensitive substance on one or both sides; and with or without a top coat
Other
Envelopes, letter cards, plain postcards and correspondence cards, of paper or paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationery
Envelopes
Letter cards, plain postcards and correspondence cards
Boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationery
Toilet paper and similar paper, cellulose wadding or webs of cellulose fibres, of a kind used for household or sanitary purposes, in rolls of a width not exceeding 36|cm, or cut to size or shape; handkerchiefs, cleansing tissues, towels, tablecloths, serviettes, bedsheets and similar household, sanitary or hospital articles, articles of apparel and clothing accessories, of paper pulp, paper, cellulose wadding or webs of cellulose fibres
Toilet paper
Weighing, per ply, 25|g/m$2|or less
Weighing, per ply, more than 25|g/m$2
Handkerchiefs, cleansing or facial tissues and towels
Handkerchiefs and cleansing or facial tissues
Hand towels
In rolls
Other
Tablecloths and serviettes
Articles of apparel and clothing accessories
Other
Articles of a kind used for surgical, medical or hygienic purposes, not put up for retail sale
Other
Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibres; box files, letter trays, and similar articles, of paper or paperboard, of a kind used in offices, shops or the like
Cartons, boxes and cases, of corrugated paper or paperboard
Folding cartons, boxes and cases, of non-corrugated paper or paperboard
Sacks and bags, having a base of a width of 40|cm or more
Other sacks and bags, including cones
Other packing containers, including record sleeves
Box files, letter trays, storage boxes and similar articles, of a kind used in offices, shops or the like
Registers, account books, notebooks, order books, receipt books, letter pads, memorandum pads, diaries and similar articles, exercise books, blotting pads, binders (loose-leaf or other), folders, file covers, manifold business forms, interleaved carbon sets and other articles of stationery, of paper or paperboard; albums for samples or for collections and book covers, of paper or paperboard
Registers, account books, notebooks, order books, receipt books, letter pads, memorandum pads, diaries and similar articles
Registers, account books, order books and receipt books
Notebooks, letter pads and memorandum pads
Diaries
Other
Exercise books
Binders (other than book covers), folders and file covers
Manifold business forms and interleaved carbon sets
Albums for samples or for collections
Other
Paper or paperboard labels of all kinds, whether or not printed
Printed
Self-adhesive
Other
Other
Self-adhesive
Other
Bobbins, spools, cops and similar supports, of paper pulp, paper or paperboard (whether or not perforated or hardened)
Of a kind used for winding textile yarn
Other
Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shape; other articles of paper pulp, paper, paperboard, cellulose wadding or webs of cellulose fibres
Filter paper and paperboard
Rolls, sheets and dials, printed for self-recording apparatus
Trays, dishes, plates, cups and the like, of paper or paperboard
Of bamboo
Other
Trays, dishes and plates
Other
Moulded or pressed articles of paper pulp
Moulded trays and boxes for packing eggs
Other
Other
Paper and paperboard, of a kind used for writing, printing or other graphic purposes
Other
Gaskets, washers and other seals, for use in civil aircraft
Lightweight thermal paper weighing 65 gr/m² or less; in rolls of a width of 20 cm or more, a weight of the roll (including the paper) of 50 kg or more and a diameter of the roll (including the paper) of 40 cm or more (‘jumbo rolls’); with or without a base coat on one or both sides; coated with a thermosensitive substance on one or both sides; and with or without a top coat
Other
PRINTED BOOKS, NEWSPAPERS, PICTURES AND OTHER PRODUCTS OF THE PRINTING INDUSTRY; MANUSCRIPTS, TYPESCRIPTS AND PLANS
Printed books, brochures, leaflets and similar printed matter, whether or not in single sheets
In single sheets, whether or not folded
Other
Dictionaries and encyclopaedias, and serial instalments thereof
Other
Newspapers, journals and periodicals, whether or not illustrated or containing advertising material
Appearing at least four times a week
Other
Children's picture, drawing or colouring books
Music, printed or in manuscript, whether or not bound or illustrated
Maps and hydrographic or similar charts of all kinds, including atlases, wall maps, topographical plans and globes, printed
Globes
Other
In book form
Other
Plans and drawings for architectural, engineering, industrial, commercial, topographical or similar purposes, being originals drawn by hand; handwritten texts; photographic reproductions on sensitised paper and carbon copies of the foregoing
Unused postage, revenue or similar stamps of current or new issue in the country in which they have, or will have, a recognised face value; stamp-impressed paper; banknotes; cheque forms; stock, share or bond certificates and similar documents of title
Postage, revenue and similar stamps
Banknotes
Other
Transfers (decalcomanias)
Transfers (decalcomanias), vitrifiable
Other
Printed or illustrated postcards; printed cards bearing personal greetings, messages or announcements, whether or not illustrated, with or without envelopes or trimmings
Calendars of any kind, printed, including calendar blocks
Other printed matter, including printed pictures and photographs
Trade advertising material, commercial catalogues and the like
Commercial catalogues
Other
Other
Pictures, designs and photographs
Sheets (not being trade advertising material), not folded, merely with illustrations or pictures not bearing a text or caption, for editions of books or periodicals which are published in different countries in one or more languages
Other
Other
SILK
Silkworm cocoons suitable for reeling
Raw silk (not thrown)
Silk waste (including cocoons unsuitable for reeling, yarn waste and garnetted stock)
Not carded or combed
Other
Silk yarn (other than yarn spun from silk waste) not put up for retail sale
Unbleached, scoured or bleached
Yarn spun entirely from silk
Other
Other
Yarn spun from silk waste, not put up for retail sale
Unbleached, scoured or bleached
Yarn spun entirely from silk waste (noil), not put up for retail sale
Other
Other
Yarn spun entirely from silk waste (noil), not put up for retail sale
Other
Silk yarn and yarn spun from silk waste, put up for retail sale; silkworm gut
Silk yarn
Yarn spun from noil or other silk waste; silkworm gut
Woven fabrics of silk or of silk waste
Fabrics of noil silk
Manufactured on handlooms
Other
Other fabrics, containing 85|% or more by weight of silk or of silk waste other than noil silk
Crêpes
Unbleached, scoured or bleached
Manufactured on handlooms
Other
Other
Manufactured on handlooms
Other
Pongee, habutai, honan, shantung, corah and similar far eastern fabrics, wholly of silk (not mixed with noil or other silk waste or with other textile materials)
Plain-woven, unbleached or not further processed than scoured
Manufactured on handlooms
Other
Other
Plain-woven
Manufactured on handlooms
Other
Other
Manufactured on handlooms
Other
Other
Diaphanous fabrics (open weave)
Manufactured on handlooms
Other
Other
Unbleached, scoured or bleached
Manufactured on handlooms
Other
Dyed
Manufactured on handlooms
Other
Of yarns of different colours
Of a width exceeding 57|cm but not exceeding 75|cm
Manufactured on handlooms
Other
Other
Manufactured on handlooms
Other
Printed
Manufactured on handlooms
Other
Other fabrics
Unbleached, scoured or bleached
Manufactured on handlooms
Other
Dyed
Manufactured on handlooms
Other
Of yarns of different colours
Manufactured on handlooms
Other
Printed
Manufactured on handlooms
Other
WOOL, FINE OR COARSE ANIMAL HAIR; HORSEHAIR YARN AND WOVEN FABRIC
Wool, not carded or combed
Greasy, including fleece-washed wool
Shorn wool
Other
Degreased, not carbonised
Shorn wool
Other
Carbonised
Fine or coarse animal hair, not carded or combed
Fine animal hair
Of Kashmir (cashmere) goats
Other
Of angora rabbit
Of alpaca, llama or vicuna
Of camel (including dromedary) or yak, or of angora, Tibetan or similar goats
Of rabbit (other than angora rabbit), hare, beaver, nutria or muskrat
Coarse animal hair
Waste of wool or of fine or coarse animal hair, including yarn waste but excluding garnetted stock
Noils of wool or of fine animal hair
Not carbonised
Carbonised
Other waste of wool or of fine animal hair
Waste of coarse animal hair
Garnetted stock of wool or of fine or coarse animal hair
Wool and fine or coarse animal hair, carded or combed (including combed wool in fragments)
Carded wool
Wool tops and other combed wool
Combed wool in fragments
Other
Fine animal hair, carded or combed
Of Kashmir (cashmere) goats
Other
Coarse animal hair, carded or combed
Yarn of carded wool, not put up for retail sale
Containing 85|% or more by weight of wool
Unbleached
Other
Containing less than 85|% by weight of wool
Containing 85|% or more by weight of wool and fine animal hair
Other
Unbleached
Other
Yarn of combed wool, not put up for retail sale
Containing 85|% or more by weight of wool
Unbleached
Other
Containing less than 85|% by weight of wool
Containing 85|% or more by weight of wool and fine animal hair
Unbleached
Other
Other
Mixed solely or mainly with synthetic staple fibres
Unbleached
Other
Otherwise mixed
Unbleached
Other
Yarn of fine animal hair (carded or combed), not put up for retail sale
Carded
Unbleached
Other
Combed
Unbleached
Other
Yarn of wool or of fine animal hair, put up for retail sale
Containing 85|% or more by weight of wool or of fine animal hair
In balls, hanks or skeins, of a weight exceeding 125|g but not exceeding 500|g
Other
Other
Yarn of coarse animal hair or of horsehair (including gimped horsehair yarn), whether or not put up for retail sale
Woven fabrics of carded wool or of carded fine animal hair
Containing 85|% or more by weight of wool or of fine animal hair
Of a weight not exceeding 300|g/m$2
Other
Other, mixed mainly or solely with man-made filaments
Other, mixed mainly or solely with man-made staple fibres
Of a weight not exceeding 300|g/m$2
Of a weight exceeding 300|g/m$2
Other
Containing a total of more than 10|% by weight of textile materials of Chapter|50
Other
Of a weight not exceeding 300|g/m$2
Of a weight exceeding 300|g/m$2
Woven fabrics of combed wool or of combed fine animal hair
Containing 85|% or more by weight of wool or of fine animal hair
Of a weight not exceeding 200|g/m$2
Other
Other, mixed mainly or solely with man-made filaments
Other, mixed mainly or solely with man-made staple fibres
Of a weight not exceeding 200|g/m$2
Of a weight exceeding 200|g/m$2
Other
Containing a total of more than 10|% by weight of textile materials of Chapter|50
Other
Of a weight not exceeding 200|g/m$2
Of a weight exceeding 200|g/m$2
Woven fabrics of coarse animal hair or of horsehair
COTTON
Cotton, not carded or combed
Rendered absorbent or bleached
Other
Cotton waste (including yarn waste and garnetted stock)
Yarn waste (including thread waste)
Other
Garnetted stock
Other
Cotton, carded or combed
Cotton sewing thread, whether or not put up for retail sale
Not put up for retail sale
Containing 85|% or more by weight of cotton
Other
Put up for retail sale
Cotton yarn (other than sewing thread), containing 85|% or more by weight of cotton, not put up for retail sale
Single yarn, of uncombed fibres
Measuring 714,29|decitex or more (not exceeding 14|metric number)
Measuring less than 714,29|decitex but not less than 232,56|decitex (exceeding 14|metric number but not exceeding 43|metric number)
Measuring less than 232,56|decitex but not less than 192,31|decitex (exceeding 43|metric number but not exceeding 52|metric number)
Measuring less than 192,31|decitex but not less than 125|decitex (exceeding 52|metric number but not exceeding 80|metric number)
Measuring less than 125|decitex (exceeding 80|metric number)
Measuring less than 125|decitex but not less than 83,33|decitex (exceeding 80|metric number but not exceeding 120|metric number)
Measuring less than 83,33|decitex (exceeding 120|metric number)
Single yarn, of combed fibres
Measuring 714,29|decitex or more (not exceeding 14|metric number)
Measuring less than 714,29|decitex but not less than 232,56|decitex (exceeding 14|metric number but not exceeding 43|metric number)
Measuring less than 232,56|decitex but not less than 192,31|decitex (exceeding 43|metric number but not exceeding 52|metric number)
Measuring less than 192,31|decitex but not less than 125|decitex (exceeding 52|metric number but not exceeding 80|metric number)
Measuring less than 125|decitex but not less than 106,38|decitex (exceeding 80|metric number but not exceeding 94|metric number)
Measuring less than 106,38|decitex but not less than 83,33|decitex (exceeding 94|metric number but not exceeding 120|metric number)
Measuring less than 83,33|decitex (exceeding 120|metric number)
Multiple (folded) or cabled yarn, of uncombed fibres
Measuring per single yarn 714,29|decitex or more (not exceeding 14|metric number per single yarn)
Six ply yarn of bleached cotton, measuring 925|dtex or more but not more than 989|dtex per single yarn, for the manufacture of tampons
Other
Measuring per single yarn less than 714,29|decitex but not less than 232,56|decitex (exceeding 14|metric number but not exceeding 43|metric number per single yarn)
Measuring per single yarn less than 232,56|decitex but not less than 192,31|decitex (exceeding 43|metric number but not exceeding 52|metric number per single yarn)
Measuring per single yarn less than 192,31|decitex but not less than 125|decitex (exceeding 52|metric number but not exceeding 80|metric number per single yarn)
Measuring per single yarn less than 125|decitex (exceeding 80|metric number per single yarn)
Multiple (folded) or cabled yarn, of combed fibres
Measuring per single yarn 714,29|decitex or more (not exceeding 14|metric number per single yarn)
Measuring per single yarn less than 714,29|decitex but not less than 232,56|decitex (exceeding 14|metric number but not exceeding 43|metric number per single yarn)
Measuring per single yarn less than 232,56|decitex but not less than 192,31|decitex (exceeding 43|metric number but not exceeding 52|metric number per single yarn)
Measuring per single yarn less than 192,31|decitex but not less than 125|decitex (exceeding 52|metric number but not exceeding 80|metric number per single yarn)
Measuring per single yarn less than 125|decitex but not less than 106,38|decitex (exceeding 80|metric number but not exceeding 94|metric number per single yarn)
Measuring per single yarn less than 106,38|decitex but not less than 83,33|decitex (exceeding 94|metric number but not exceeding 120|metric number per single yarn)
Measuring per single yarn less than 83,33|decitex (exceeding 120|metric number per single yarn)
Cotton yarn (other than sewing thread), containing less than 85|% by weight of cotton, not put up for retail sale
Single yarn, of uncombed fibres
Measuring 714,29|decitex or more (not exceeding 14|metric number)
Measuring less than 714,29|decitex but not less than 232,56|decitex (exceeding 14|metric number but not exceeding 43|metric number)
Measuring less than 232,56|decitex but not less than 192,31|decitex (exceeding 43|metric number but not exceeding 52|metric number)
Measuring less than 192,31|decitex but not less than 125|decitex (exceeding 52|metric number but not exceeding 80|metric number)
Measuring less than 125|decitex (exceeding 80|metric number)
Single yarn, of combed fibres
Measuring 714,29|decitex or more (not exceeding 14|metric number)
Measuring less than 714,29|decitex but not less than 232,56|decitex (exceeding 14|metric number but not exceeding 43|metric number)
Measuring less than 232,56|decitex but not less than 192,31|decitex (exceeding 43|metric number but not exceeding 52|metric number)
Measuring less than 192,31|decitex but not less than 125|decitex (exceeding 52|metric number but not exceeding 80|metric number)
Measuring less than 125|decitex (exceeding 80|metric number)
Multiple (folded) or cabled yarn, of uncombed fibres
Measuring per single yarn 714,29|decitex or more (not exceeding 14|metric number per single yarn)
Measuring per single yarn less than 714,29|decitex but not less than 232,56|decitex (exceeding 14|metric number but not exceeding 43|metric number per single yarn)
Measuring per single yarn less than 232,56|decitex but not less than 192,31|decitex (exceeding 43|metric number but not exceeding 52|metric number per single yarn)
Measuring per single yarn less than 192,31|decitex but not less than 125|decitex (exceeding 52|metric number but not exceeding 80|metric number per single yarn)
Measuring per single yarn less than 125|decitex (exceeding 80|metric number per single yarn)
Multiple (folded) or cabled yarn, of combed fibres
Measuring per single yarn 714,29|decitex or more (not exceeding 14|metric number per single yarn)
Measuring per single yarn less than 714,29|decitex but not less than 232,56|decitex (exceeding 14|metric number but not exceeding 43|metric number per single yarn)
Measuring per single yarn less than 232,56|decitex but not less than 192,31|decitex (exceeding 43|metric number but not exceeding 52|metric number per single yarn)
Measuring per single yarn less than 192,31|decitex but not less than 125|decitex (exceeding 52|metric number but not exceeding 80|metric number per single yarn)
Measuring per single yarn less than 125|decitex (exceeding 80|metric number per single yarn)
Cotton yarn (other than sewing thread) put up for retail sale
Containing 85|% or more by weight of cotton
Other
Woven fabrics of cotton, containing 85|% or more by weight of cotton, weighing not more than 200|g/m$2
Unbleached
Plain weave, weighing not more than 100|g/m$2
Fabrics for the manufacture of bandages, dressings and medical gauzes
Other
Plain weave, weighing more than 100|g/m$2
Plain weave, weighing more than 100|g/m$2|but not more than 130|g/m$2|and of a width
Not exceeding 165|cm
Exceeding 165|cm
Plain weave, weighing more than 130|g/m$2|and of a width
Not exceeding 165|cm
Exceeding 165|cm
3-thread or 4-thread twill, including cross twill
Other fabrics
Bleached
Plain weave, weighing not more than 100|g/m$2
Fabrics for the manufacture of bandages, dressings and medical gauzes
Other
Plain weave, weighing more than 100|g/m$2
Plain weave, weighing more than 100|g/m$2|but not more than 130|g/m$2|and of a width
Not exceeding 165|cm
Exceeding 165|cm
Plain weave, weighing more than 130|g/m$2|and of a width
Not exceeding 165|cm
Exceeding 165|cm
3-thread or 4-thread twill, including cross twill
Other fabrics
Dyed
Plain weave, weighing not more than 100|g/m$2
Plain weave, weighing more than 100|g/m$2
Plain weave, weighing more than 100|g/m$2|but not more than 130|g/m$2|and of a width
Not exceeding 165|cm
Exceeding 165|cm
Plain weave, weighing more than 130|g/m$2|and of a width
Not exceeding 165|cm
Exceeding 165|cm
3-thread or 4-thread twill, including cross twill
Other fabrics
Of yarns of different colours
Plain weave, weighing not more than 100|g/m$2
Plain weave, weighing more than 100|g/m$2
3-thread or 4-thread twill, including cross twill
Other fabrics
Printed
Plain weave, weighing not more than 100|g/m$2
Manufactured on handlooms
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Plain weave, weighing more than 100|g/m$2
Manufactured on handlooms
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Other fabrics
3-thread or 4-thread twill, including cross twill
Manufactured on handlooms
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Other
Manufactured on handlooms
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Woven fabrics of cotton, containing 85|% or more by weight of cotton, weighing more than 200|g/m$2
Unbleached
Plain weave
3-thread or 4-thread twill, including cross twill
Other fabrics
Bleached
Plain weave
3-thread or 4-thread twill, including cross twill
Other fabrics
Dyed
Plain weave
3-thread or 4-thread twill, including cross twill
Other fabrics
Of yarns of different colours
Plain weave
Denim
Other fabrics of 3-thread or 4-thread twill, including cross twill
Other fabrics
Printed
Plain weave
Manufactured on handlooms
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
3-thread or 4-thread twill, including cross twill
Manufactured on handlooms
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Other fabrics
Manufactured on handlooms
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Woven fabrics of cotton, containing less than 85|% by weight of cotton, mixed mainly or solely with man-made fibres, weighing not more than 200|g/m$2
Unbleached
Plain weave
Manufactured on handlooms
Other
Other fabrics
Manufactured on handlooms
Other
Bleached
Plain weave
Manufactured on handlooms
Other
Other fabrics
Manufactured on handlooms
Other
Dyed
Plain weave
Manufactured on handlooms
Other
3-thread or 4-thread twill, including cross twill
Manufactured on handlooms
Other
Other fabrics
Manufactured on handlooms
Other
Of yarns of different colours
Plain weave
Manufactured on handlooms
Other
Other fabrics
Manufactured on handlooms
Other
Printed
Plain weave
Manufactured on handlooms
Other
Other fabrics
Manufactured on handlooms
Other
Woven fabrics of cotton, containing less than 85|% by weight of cotton, mixed mainly or solely with man-made fibres, weighing more than 200|g/m$2
Unbleached
Plain weave
Manufactured on handlooms
Other
3-thread or 4-thread twill, including cross twill
Manufactured on handlooms
Other
Other fabrics
Manufactured on handlooms
Other
Bleached
Manufactured on handlooms
Other
Dyed
Plain weave
Manufactured on handlooms
Other
3-thread or 4-thread twill, including cross twill
Manufactured on handlooms
Other
Other fabrics
Manufactured on handlooms
Other
Of yarns of different colours
Plain weave
Manufactured on handlooms
Other
Denim
Manufactured on handlooms
Other
Other fabrics of 3-thread or 4-thread twill, including cross twill
Manufactured on handlooms
Other
Other fabrics
Jacquard fabrics
Manufactured on handlooms
Other
Other
Manufactured on handlooms
Other
Printed
Plain weave
Manufactured on handlooms
Other
3-thread or 4-thread twill, including cross twill
Manufactured on handlooms
Other
Other fabrics
Manufactured on handlooms
Other
Other woven fabrics of cotton
Weighing not more than 200|g/m$2
Unbleached
Mixed mainly or solely with flax
Manufactured on handlooms
Other
Otherwise mixed
Manufactured on handlooms
Other
Bleached
Mixed mainly or solely with flax
Manufactured on handlooms
Other
Otherwise mixed
Manufactured on handlooms
Other
Dyed
Mixed mainly or solely with flax
Manufactured on handlooms
Other
Otherwise mixed
Manufactured on handlooms
Other
Of yarns of different colours
Mixed mainly or solely with flax
Manufactured on handlooms
Other
Otherwise mixed
Manufactured on handlooms
Other
Printed
Mixed mainly or solely with flax
Manufactured on handlooms
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Otherwise mixed
Manufactured on handlooms
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Weighing more than 200|g/m$2
Unbleached
Mixed mainly or solely with flax
Manufactured on handlooms
Other
Otherwise mixed
Manufactured on handlooms
Other
Bleached
Mixed mainly or solely with flax
Manufactured on handlooms
Other
Otherwise mixed
Manufactured on handlooms
Other
Dyed
Mixed mainly or solely with flax
Manufactured on handlooms
Other
Otherwise mixed
Manufactured on handlooms
Other
Of yarns of different colours
Mixed mainly or solely with flax
Manufactured on handlooms
Other
Otherwise mixed
Manufactured on handlooms
Other
Printed
Mixed mainly or solely with flax
Manufactured on handlooms
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Otherwise mixed
Manufactured on handlooms
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
OTHER VEGETABLE TEXTILE FIBRES; PAPER YARN AND WOVEN FABRICS OF PAPER YARN
Flax, raw or processed but not spun; flax tow and waste (including yarn waste and garnetted stock)
Flax, raw or retted
Flax, broken, scutched, hackled or otherwise processed, but not spun
Broken or scutched
Other
Flax tow and waste
True hemp (Cannabis sativa L.), raw or processed but not spun; tow and waste of true hemp (including yarn waste and garnetted stock)
True hemp, raw or retted
Other
Jute and other textile bast fibres (excluding flax, true hemp and ramie), raw or processed but not spun; tow and waste of these fibres (including yarn waste and garnetted stock)
Jute and other textile bast fibres, raw or retted
Other
Coconut, abaca (Manila hemp or Musa textilis Nee), ramie and other vegetable textile fibres, not elsewhere specified or included, raw or processed but not spun; tow, noils and waste of these fibres (including yarn waste and garnetted stock)
Flax yarn
Single
Not put up for retail sale
Measuring 833,3|decitex or more (not exceeding 12|metric number)
Flax yarn (other than tow yarn) for the manufacture of multiple or cabled yarns of the footwear industry of for whipping cable
Other
Measuring less than 833,3|decitex but not less than 277,8|decitex (exceeding 12|metric number but not exceeding 36|metric number)
Flax yarn (other than tow yarn), measuring 333,3 decitex or more (not exceeding 30 metric number), for the manufacture of multiple or cabled yarns of the footwear industry or for whipping cable
Other
Measuring less than 277,8|decitex (exceeding 36|metric number)
Put up for retail sale
Multiple (folded) or cabled
Not put up for retail sale
Put up for retail sale
Yarn of jute or of other textile bast fibres of heading|5303
Single
Multiple (folded) or cabled
Yarn of other vegetable textile fibres; paper yarn
Coir yarn
True hemp yarn
Not put up for retail sale
Put up for retail sale
Other
Ramie yarn
Measuring 277,8|decitex or more (not exceeding 36|metric number)
Measuring less than 277,8|decitex (exceeding 36|metric number)
Paper yarn
Other
Woven fabrics of flax
Containing 85|% or more by weight of flax
Unbleached or bleached
Unbleached
Bleached
Other
Containing less than 85|% by weight of flax
Unbleached or bleached
Other
Woven fabrics of jute or of other textile bast fibres of heading|5303
Unbleached
Of a width not exceeding 150|cm
Of a width exceeding 150|cm
Other
Of a width not exceeding|150|cm
Other
Woven fabrics of other vegetable textile fibres; woven fabrics of paper yarn
Of ramie
Other
MAN-MADE FILAMENTS; STRIP AND THE LIKE OF MAN-MADE TEXTILE MATERIALS
Sewing thread of man-made filaments, whether or not put up for retail sale
Of synthetic filaments
Not put up for retail sale
Core yarn
Polyester filament surrounded by cotton fibres
Other
Other
Textured yarn
Other
Put up for retail sale
Of artificial filaments
Not put up for retail sale
Put up for retail sale
Synthetic filament yarn (other than sewing thread), not put up for retail sale, including synthetic monofilament of less than 67|decitex
High-tenacity yarn of nylon or other polyamides
Of aramids
Other
High-tenacity yarn of polyesters
Textured yarn
Of nylon or other polyamides, measuring per single yarn not more than 50|tex
Of nylon or other polyamides, measuring per single yarn more than 50|tex
Of polyesters
Of polypropylene
Other
Other yarn, single, untwisted or with a twist not exceeding 50|turns per metre
Elastomeric
Other, of nylon or other polyamides
Yarn of synthetic textile fibres solely of aromatic polyamides obtained by the polycondensation of m-phenylenediamine and isophthalic acid
Other
Other, of polyesters, partially oriented
Other, of polyesters
Synthetic bicomponent filament yarn, not textured, untwisted, measuring 1|650|decitex or more but not more than 1|800|decitex, consisting of 110|filaments or more but not more than 120|filaments, each having a core of poly(ethylene terephthalate) and a skin of polyamide-6, containing by weight 75|% or more but not exceeding 77|% of poly(ethylene terephthalate), for use in the manufacture of roofings
Bicomponent monofilament yarn of not more than 30|dtex, consisting of: -|a polyethylene terephthalate core, and -|an outer layer of a copolymer of polyethylene terephthalate and polyethylene|isophthalate, for use in the manufacture of filtration fabrics
Other
Other, of polypropylene
Other
Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures
Non-textured filament yarn of poly(vinyl alcohol)
Synthetic filament yarn, single, containing by weight 85|% or more of acrylonitrile, in the form of a wick containing 1|000|continuous filaments or more but not more than 25|000|continuous filaments, of a weight per metre of 0,12|g or more but not more than 3,75|g and of a length of 100|m or more, for the manufacture of carbon-fibre yarn
Other
Other yarn, single, with a twist exceeding 50|turns per metre
Of nylon or other polyamides
Of polyesters
Other
Of polypropylene
Other
Other yarn, multiple (folded) or cabled
Of nylon or other polyamides
Of polyesters
Other
Of polypropylene
Other
Artificial filament yarn (other than sewing thread), not put up for retail sale, including artificial monofilament of less than 67|decitex
High-tenacity yarn of viscose rayon
Other yarn, single
Of viscose rayon, untwisted or with a twist not exceeding 120|turns per metre
Textured yarn
Other
Of viscose rayon, with a twist exceeding 120|turns per metre
With a twist not exceeding|250|turns per metre
Textured yarn
Other
Other
Of cellulose acetate
Single, untwisted or with a twist not exceeding|250|turns per metre
Textured yarn
Other
Other
Other
Biodegradable (norm EN 14995) monofilament of not more than 33|dtex, containing at least 98|% by weight polylactide (PLA), for use in the manufacture of filtration fabrics for the food industry
Other
Other yarn, multiple (folded) or cabled
Of viscose rayon
Of cellulose acetate
Other
Synthetic monofilament of 67|decitex or more and of which no cross-sectional dimension exceeds 1|mm; strip and the like (for example, artificial straw), of synthetic textile materials, of an apparent width not exceeding 5|mm
Monofilament
Elastomeric
Other, of polypropylene
Other
Monofilament of poly(1,4-dioxanone)
Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5|mm or more but not more than 1|mm, for use in the manufacture of zippers
Other
Other
Of polypropylene
Other
Strip of polyimide
Other
Artificial monofilament of 67|decitex or more and of which no cross-sectional dimension exceeds 1|mm; strip and the like (for example, artificial straw), of artificial textile materials, of an apparent width not exceeding 5|mm
Man-made filament yarn (other than sewing thread), put up for retail sale
Woven fabrics of synthetic filament yarn, including woven fabrics obtained from materials of heading|5404
Woven fabrics obtained from high-tenacity yarn of nylon or other polyamides or of polyesters
Textile fabric, consisting of warp filament yarns of polyamide-6,6|and weft filament yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis (phenyleneamine)
Other
Woven fabrics obtained from strip or the like
Of polyethylene or polypropylene, of a width of
Less than 3|m
3|m or more
Other
Fabrics specified in note|9|to Section|XI
Other woven fabrics, containing 85|% or more by weight of filaments of nylon or other polyamides
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
Other woven fabrics, containing 85|% or more by weight of textured polyester filaments
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
Other woven fabrics, containing 85|% or more by weight of polyester filaments
Containing 85|% or more by weight of non-textured polyester filaments
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
Other
Unbleached or bleached
Other
Other woven fabrics, containing 85|% or more by weight of synthetic filaments
Unbleached or bleached
Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form
Other
Dyed
Of yarns of different colours
Printed
Other woven fabrics, containing less than 85|% by weight of synthetic filaments, mixed mainly or solely with cotton
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
Other woven fabrics
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
Woven fabrics of artificial filament yarn, including woven fabrics obtained from materials of heading|5405
Woven fabrics obtained from high-tenacity yarn of viscose rayon
Other woven fabrics, containing 85|% or more by weight of artificial filament or strip or the like
Unbleached or bleached
Dyed
Of a width exceeding 135|cm but not exceeding 155|cm, plain weave, twill weave, cross twill weave or satin weave
Manufacture from man-made filament yarns
Other
Other
Manufacture from man-made filament yarns
Other
Of yarns of different colours
Printed
Other woven fabrics
Unbleached or bleached
Dyed
Manufacture from man-made filament yarns
Other
Of yarns of different colours
Printed
MAN-MADE STAPLE FIBRES
Synthetic filament tow
Of nylon or other polyamides
Of polyesters
Acrylic or modacrylic
Of polypropylene
Other
Artificial filament tow
Of viscose rayon
Of acetate
Other
Synthetic staple fibres, not carded, combed or otherwise processed for spinning
Of nylon or other polyamides
Of aramids
Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine), of a length of not more than 7|mm
Other
Other
Of polyesters
Acrylic or modacrylic
Of polypropylene
Hollow polypropylene staple fibres: -|measuring 6|decitex or more but not more than 10|decitex, -|of a strength of 3,5|cN/dtex or more -|of a diameter of 30|µm or more for use in the manufacture of napkins and napkin liners for babies and other sanitary products
Other
Other
Poly(vinyl alcohol) fibres, whether or not acetalized
Trilobal poly(thio-1,4-phenylene) fibres
Other
Artificial staple fibres, not carded, combed or otherwise processed for spinning
Of viscose rayon
Other
Waste (including noils, yarn waste and garnetted stock) of man-made fibres
Of synthetic fibres
Of nylon or other polyamides
Of polyesters
Acrylic or modacrylic
Of polypropylene
Other
Of artificial fibres
Synthetic staple fibres, carded, combed or otherwise processed for spinning
Of nylon or other polyamides
Of polyesters
Acrylic or modacrylic
Other
Poly(vinyl alcohol) fibres, whether or not acetalized
Other
Artificial staple fibres, carded, combed or otherwise processed for spinning
Sewing thread of man-made staple fibres, whether or not put up for retail sale
Of synthetic staple fibres
Not put up for retail sale
Put up for retail sale
Of artificial staple fibres
Not put up for retail sale
Put up for retail sale
Yarn (other than sewing thread) of synthetic staple fibres, not put up for retail sale
Containing 85|% or more by weight of staple fibres of nylon or other polyamides
Single yarn
Multiple (folded) or cabled yarn
Containing 85|% or more by weight of polyester staple fibres
Single yarn
Multiple (folded) or cabled yarn
Containing 85|% or more by weight of acrylic or modacrylic staple fibres
Single yarn
Multiple (folded) or cabled yarn
Other yarn, containing 85|% or more by weight of synthetic staple fibres
Single yarn
Multiple (folded) or cabled yarn
Other yarn, of polyester staple fibres
Mixed mainly or solely with artificial staple fibres
Mixed mainly or solely with wool or fine animal hair
Mixed mainly or solely with cotton
Other
Other yarn, of acrylic or modacrylic staple fibres
Mixed mainly or solely with wool or fine animal hair
Mixed mainly or solely with cotton
Other
Other yarn
Mixed mainly or solely with wool or fine animal hair
Mixed mainly or solely with cotton
Other
Yarn (other than sewing thread) of artificial staple fibres, not put up for retail sale
Containing 85|% or more by weight of artificial staple fibres
Single yarn
Multiple (folded) or cabled yarn
Other yarn, mixed mainly or solely with wool or fine animal hair
Other yarn, mixed mainly or solely with cotton
Other yarn
Yarn (other than sewing thread) of man-made staple fibres, put up for retail sale
Of synthetic staple fibres, containing 85|% or more by weight of such fibres
Of synthetic staple fibres, containing less than 85|% by weight of such fibres
Of artificial staple fibres
Woven fabrics of synthetic staple fibres, containing 85|% or more by weight of synthetic staple fibres
Containing 85|% or more by weight of polyester staple fibres
Unbleached or bleached
Other
Printed
Other
Containing 85|% or more by weight of acrylic or modacrylic staple fibres
Unbleached or bleached
Other
Printed
Other
Other
Unbleached or bleached
Other
Printed
Other
Woven fabrics of synthetic staple fibres, containing less than 85|% by weight of such fibres, mixed mainly or solely with cotton, of a weight not exceeding 170|g/m$2
Unbleached or bleached
Of polyester staple fibres, plain weave
Of a width of 165|cm or less
Of a width of more than 165|cm
3-thread or 4-thread twill, including cross twill, of polyester staple fibres
Other woven fabrics of polyester staple fibres
Other woven fabrics
Dyed
Of polyester staple fibres, plain weave
Other woven fabrics of polyester staple fibres
3-thread or 4-thread twill, including cross twill
Other
Other woven fabrics
Of yarns of different colours
Of polyester staple fibres, plain weave
Other woven fabrics
Printed
Of polyester staple fibres, plain weave
Other woven fabrics
Woven fabrics of synthetic staple fibres, containing less than 85|% by weight of such fibres, mixed mainly or solely with cotton, of a weight exceeding 170|g/m$2
Unbleached or bleached
Of polyester staple fibres, plain weave
3-thread or 4-thread twill, including cross twill, of polyester staple fibres
Other woven fabrics
Of polyester staple fibres
Other
Dyed
Of polyester staple fibres, plain weave
3-thread or 4-thread twill, including cross twill, of polyester staple fibres
Other woven fabrics of polyester staple fibres
Other woven fabrics
Of yarns of different colours
Of polyester staple fibres, plain weave
3-thread or 4-thread twill, including cross twill, of polyester staple fibres
Other woven fabrics of polyester staple fibres
Other woven fabrics
Printed
Of polyester staple fibres, plain weave
3-thread or 4-thread twill, including cross twill, of polyester staple fibres
Other woven fabrics of polyester staple fibres
Other woven fabrics
Other woven fabrics of synthetic staple fibres
Of polyester staple fibres
Mixed mainly or solely with viscose rayon staple fibres
Unbleached or bleached
Printed
Other
Mixed mainly or solely with man-made filaments
Unbleached or bleached
Printed
Other
Mixed mainly or solely with wool or fine animal hair
Mixed mainly or solely with carded wool or fine animal hair (woollen)
Unbleached or bleached
Other
Mixed mainly or solely with combed wool or fine animal hair (worsted)
Unbleached or bleached
Other
Other
Unbleached or bleached
Printed
Other
Of acrylic or modacrylic staple fibres
Mixed mainly or solely with man-made filaments
Unbleached or bleached
Printed
Other
Mixed mainly or solely with wool or fine animal hair
Mixed mainly or solely with carded wool or fine animal hair (woollen)
Unbleached or bleached
Other
Mixed mainly or solely with combed wool or fine animal hair (worsted)
Unbleached or bleached
Other
Other
Other woven fabrics
Mixed mainly or solely with man-made filaments
Unbleached or bleached
Printed
Other
Other
Unbleached or bleached
Printed
Other
Woven fabrics of artificial staple fibres
Containing 85|% or more by weight of artificial staple fibres
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
Containing less than 85|% by weight of artificial staple fibres, mixed mainly or solely with man-made filaments
Unbleached or bleached
Dyed
Of yarns of different colours
Jacquard fabrics of a width of 140|cm or more (mattress tickings)
Other
Printed
Containing less than 85|% by weight of artificial staple fibres, mixed mainly or solely with wool or fine animal hair
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
Containing less than 85|% by weight of artificial staple fibres, mixed mainly or solely with cotton
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
Other
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
WADDING, FELT AND NONWOVENS; SPECIAL YARNS; TWINE, CORDAGE, ROPES AND CABLES AND ARTICLES THEREOF
Wadding of textile materials and articles thereof; textile fibres, not exceeding 5|mm in length (flock), textile dust and mill neps
Wadding of textile materials and articles thereof
Of cotton
Absorbent
Other
Of man-made fibres
Rolls of a diameter not exceeding 8|mm
Other
Other
Textile flock and dust and mill neps
Poly(vinyl alcohol) fibres, whether or not acetalized
Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine), of a length of not more than 7|mm
Other
Felt, whether or not impregnated, coated, covered or laminated
Needleloom felt and stitch-bonded fibre fabrics
Not impregnated, coated, covered or laminated
Needleloom felt
Of jute or other textile bast fibres of heading|5303
Of other textile materials
Stitch-bonded fibre fabrics
Of wool or fine animal hair
Of other textile materials
Of coarse animal hair
Other
Impregnated, coated, covered or laminated
Other felt, not impregnated, coated, covered or laminated
Of wool or fine animal hair
Of other textile materials
Of coarse animal hair
Of other textile materials
Other
Nonwovens, whether or not impregnated, coated, covered or laminated
Of man-made filaments
Weighing not more than 25|g/m$2
Coated or covered
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: -|of a thickness of 200|µm or more but not more than 280|µm and -|of a weight of 20|g/m$2|or more but not more than 50|g/m$2
Nonwovens, not weighing more than 20g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10µm but not more than 20µm in diameter) and the inner layer containing super-fine endless filaments (not less than 1µm but not more than 5µm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins
Other
Other
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: -|of a thickness of 200|µm or more but not more than 280|µm and -|of a weight of 20|g/m$2|or more but not more than 50|g/m$2
Nonwovens, not weighing more than 20g/m2, containing spunbonded and meltblown filaments put together in a sandwich way with the two outer layers containing fine endless filaments (not less than 10µm but not more than 20µm in diameter) and the inner layer containing super-fine endless filaments (not less than 1µm but not more than 5µm in diameter), for the manufacture of napkins and napkin liners for babies and similar sanitary napkins
Other
Weighing more than 25|g/m$2|but not more than 70|g/m$2
Coated or covered
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: -|of a thickness of 200|µm or more but not more than 280|µm and -|of a weight of 20|g/m$2|or more but not more than 50|g/m$2
Other
Other
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: -|of a thickness of 200|µm or more but not more than 280|µm and -|of a weight of 20|g/m$2|or more but not more than 50|g/m$2
Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles
Non-woven: - weighing 30g/m2 or more, but not more than 60g/m2, - containing fibres of polypropylene or of polypropylene and polyethylene, - whether or not printed, with: - on one side, 65% of the total surface area having circular bobbles of 4mm in diameter, consisting of anchored, elevated un-bonded curly fibres, suitable for the engagement of extruded hook materials, and the remaining 35% of the surface area being bonded, - and on other side a smooth untextured surface, for use in the manufacture of napkins and napkin liners for babies and similar sanitary articles
Non-woven of spunbonded polyethylene, of a weight of more than 60|g/m2|but not more than 80|g/m2|and an air resistance (Gurley) of 8|seconds or more but not more than 36|seconds (as determined by the ISO 5636/5|method)
Non-wovens of polypropylene, -|with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene, -|with a weight of not more than 150|g/m$2, -|in the piece or simply cut into squares or rectangles, and -|not impregnated
Other
Weighing more than 70|g/m$2|but not more than 150|g/m$2
Coated or covered
Electrically nonconductive nonwovens, consisting of a central film of poly(ethylene terephthalate) laminated on each side with unidirectionally aligned fibres of poly(ethylene terephthalate), coated on both sides with high grade temperature resistant electrical nonconductive resin, weighing 147|g/m$2|or more but not more than 265|g/m$2, with non-isotropic tensile strength on both directions, to be used as electrical insulation material
Non-woven of spunbonded polyethylene, with a coating, -|of a weight of more than 80|g/m$2|but not more than 105|g/m$2|and -|an air resistance (Gurley) of 8|seconds or more but not more than|75|seconds (as determined by the ISO|5636/5|method)
Other
Other
Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles
Non-woven of spunbonded polyethylene, of a weight of more than 60|g/m2|but not more than 80|g/m2|and an air resistance (Gurley) of 8|seconds or more but not more than 36|seconds (as determined by the ISO 5636/5|method)
Non-wovens of polypropylene, -|with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene, -|with a weight of not more than 150|g/m$2, -|in the piece or simply cut into squares or rectangles, and -|not impregnated
Other
Weighing more than 150|g/m$2
Coated or covered
Electrically nonconductive nonwovens, consisting of a central film of poly(ethylene terephthalate) laminated on each side with unidirectionally aligned fibres of poly(ethylene terephthalate), coated on both sides with high grade temperature resistant electrical nonconductive resin, weighing 147|g/m$2|or more but not more than 265|g/m$2, with non-isotropic tensile strength on both directions, to be used as electrical insulation material
Other
Other
Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles
Non-wovens, consisting of poly(ethylene terephthlate) spun bonded media: -|of weight of 160|g/m$2|or more but not more|than 300|g/m$2, -|whether or not laminated on one side with a membrane or a membrane and aluminium |of a kind used for the manufacture of industrial filters
Other
Other
Weighing not more than 25|g/m$2
Coated or covered
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: -|of a thickness of 200|µm or more but not more than 280|µm and -|of a weight of 20|g/m$2|or more but not more than 50|g/m$2
Other
Other
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: -|of a thickness of 200|µm or more but not more than 280|µm and -|of a weight of 20|g/m$2|or more but not more than 50|g/m$2
Other
Weighing more than 25|g/m$2|but not more than 70|g/m$2
Coated or covered
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: -|of a thickness of 200|µm or more but not more than 280|µm and -|of a weight of 20|g/m$2|or more but not more than 50|g/m$2
Other
Other
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles: -|of a thickness of 200|µm or more but not more than 280|µm and -|of a weight of 20|g/m$2|or more but not more than 50|g/m$2
Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene
Non-wovens of polypropylene, -|with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene, -|with a weight of not more than 150|g/m$2, -|in the piece or simply cut into squares or rectangles, and -|not impregnated
Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles
Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene
Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments: •a weight of 25|g/m$2 or more but not more than 70|g/m$2, •in the piece or simply cut into squares or rectangles, •not impregnated, •with cross-directional or machine-directional stretch properties for use in the manufacture of infant/child care products
Other
Weighing more than 70|g/m$2|but not more than 150|g/m$2
Coated or covered
Other
Non-wovens of polypropylene, -|with a melt blown layer, laminated on each side with spunbonded filaments of polypropylene, -|with a weight of not more than 150|g/m$2, -|in the piece or simply cut into squares or rectangles, and -|not impregnated
Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene
Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles
Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments: •a weight of 70|g/m$2 or more but not more than 150|g/m$2, •in the piece or simply cut into squares or rectangles, •not impregnated, •with cross-directional or machine-directional stretch properties for use in the manufacture of infant/child care products
Nonwovens made of polyester fibres, -|with a|weight of 85|g/m2, -|with a constant thickness of 95|µm (±|5|µm), -|neither|coated nor covered, -|in 1|m wide rolls of 2|000m to 5|000|m length, suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters
Other
Weighing more than 150|g/m$2
Coated or covered
Other
Acrylic fibre rods, having a length of not more than 50|cm, for the manufacture of pen tips
Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles
Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene
Other
Rubber thread and cord, textile covered; textile yarn, and strip and the like of heading|5404|or 5405, impregnated, coated, covered or sheathed with rubber or plastics
Rubber thread and cord, textile covered
Other
High-tenacity yarn of polyesters, of nylon or other polyamides or of viscose rayon, impregnated or coated
Of synthetic filament (continuous), not put up for retail sale, other than non-textured single yarn untwisted or with a twist of not more than 50|turns per metre
Of viscose rayon, not put up for retail sale, other than single yarn, untwisted or with a twist of not more than 250 turns per metre
Other
Other
Silk yarn spun from silk waste, and silk worm gut
Monofil, strip (artificial straw and the like) and imitation catgut, of synthetic textile materials
Artificial monofil
Cotton yarn, not put up for retail sale
Other
Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading|5404|or 5405, combined with metal in the form of thread, strip or powder or covered with metal
Gimped yarn, and strip and the like of heading|5404|or 5405, gimped (other than those of heading|5605|and gimped horsehair yarn); chenille yarn (including flock chenille yarn); loop wale-yarn
Loop wale-yarn
Other
Gimped yarn
Other
Twine, cordage, ropes and cables, whether or not plaited or braided and whether or not impregnated, coated, covered or sheathed with rubber or plastics
Of sisal or other textile fibres of the genus Agave
Binder or baler twine
For agricultural machinery
Other
Other
Of polyethylene or polypropylene
Binder or baler twine
Other
Measuring more than 50|000|decitex (5|g/m)
Plaited or braided
Other
Measuring 50|000|decitex (5|g/m) or less
Of other synthetic fibres
Of nylon or other polyamides or of polyesters
Measuring more than 50|000|decitex (5|g/m)
Plaited or braided
Twine
Other
Other
Twine
Other
Measuring 50|000|decitex (5|g/m) or less
Twine
Other
Of other synthetic fibres
Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures
Other
Twine
Other
Other
Of abaca (Manila hemp or Musa textilis Nee) or other hard (leaf) fibres; of jute or other textile bast fibres of heading|5303
Of abaca (Manila hemp or Musa textilis Nee) or other hard (leaf) fibres
Of jute or other textile bast fibres of heading 5303
Other
Of true hemp
Of flax or ramie
Other
Knotted netting of twine, cordage or rope; made-up fishing nets and other made-up nets, of textile materials
Of man-made textile materials
Made-up fishing nets
Of twine, cordage, rope or cables
Other
Other
Made-up nets
Of nylon or other polyamides
Of twine, cordage, rope or cables
Other
Other
Other
Other
Hammocks, of cotton, hand-made
Other
Articles of yarn, strip or the like of heading|5404|or 5405, twine, cordage, rope or cables, not elsewhere specified or included
CARPETS AND OTHER TEXTILE FLOOR COVERINGS
Carpets and other textile floor coverings, knotted, whether or not made up
Of wool or fine animal hair
Containing a total of more than 10|% by weight of silk or of waste silk other than noil
Hand-made
Other
Other
Of other textile materials
Of silk, of waste silk other than noil, of synthetic fibres, of yarn of heading|5605|or of textile materials containing metal threads
Hand-made
Other
Of other textile materials
Hand-made
Other
Carpets and other textile floor coverings, woven, not tufted or flocked, whether or not made up, including 'Kelem', 'Schumacks', 'Karamanie' and similar hand-woven rugs
'Kelem', 'Schumacks', 'Karamanie' and similar hand-woven rugs
Floor coverings of coconut fibres (coir)
Other, of pile construction, not made up
Of wool or fine animal hair
Axminster carpets
Other
Of man-made textile materials
Axminster carpets
Other
Of other textile materials
Of jute or of other textile bast fibres falling within heading||5303
Of sisal, of other fibres of the genus Agave or of Manila hemp
Of cotton
Other
Other, of pile construction, made up
Of wool or fine animal hair
Axminster carpets
Other
Of man-made textile materials
Axminster carpets
Other
Of other textile materials
Of jute or of other textile bast fibres falling within heading||5303
Of sisal, of other fibres of the genus Agave or of Manila hemp
Other
Other, not of pile construction, not made up
Of wool or fine animal hair
Of man-made textile materials
Of polypropylene
Other
Of other textile materials
Of jute or of other textile bast fibres falling within heading||5303
Of sisal, of other fibres of the genus Agave or of Manila hemp
Other
Other, not of pile construction, made up
Of wool or fine animal hair
Of man-made textile materials
Of polypropylene
Other
Of other textile materials
Of jute or of other textile bast fibres falling within heading||5303
Of sisal, of other fibres of the genus Agave or of Manila hemp
Other
Carpets and other textile floor coverings, tufted, whether or not made up
Of wool or fine animal hair
Of nylon or other polyamides
Printed
Tiles, having a maximum surface area of 1|m$2
Other
Other
Tiles, having a maximum surface area of 1|m$2
Other
Of other man-made textile materials
Of polypropylene
Tiles, having a maximum surface area of 1|m$2
Other
Other
Tiles, having a maximum surface area of 1|m$2
Other
Of other textile materials
Tiles, having a maximum surface area of 1|m$2
Of jute or of other textile bast fibres falling within heading||5303
Other
Other
Of jute or of other textile bast fibres falling within heading||5303
Other
Carpets and other textile floor coverings, of felt, not tufted or flocked, whether or not made up
Tiles, having a maximum surface area of 0,3|m$2
Other
Hand-made
Other
Other carpets and other textile floor coverings, whether or not made up
Of man-made textile materials
Hand-made
Other
Of other textile materials
Of sisal, of other fibres of the genus Agave or of Manila hemp
Hand-made
Other
Other
Hand-made
Other
SPECIAL WOVEN FABRICS; TUFTED TEXTILE FABRICS; LACE; TAPESTRIES; TRIMMINGS; EMBROIDERY
Woven pile fabrics and chenille fabrics, other than fabrics of heading|5802|or 5806
Of wool or fine animal hair
Of cotton
Uncut weft pile fabrics
Manufactured on handlooms
Other
Cut corduroy
Manufactured on handlooms
Other
Other weft pile fabrics
Manufactured on handlooms
Other
Chenille fabrics
Manufactured on handlooms
Other
Warp pile fabrics
Manufactured on handlooms
Other
Of man-made fibres
Uncut weft pile fabrics
Cut corduroy
Other weft pile fabrics
Chenille fabrics
Warp pile fabrics
Of other textile materials
Of flax
Other
Of silk, of noil silk or of other silk waste
Of ramie
Other
Terry towelling and similar woven terry fabrics, other than narrow fabrics of heading|5806; tufted textile fabrics, other than products of heading|5703
Terry towelling and similar woven terry fabrics, of cotton
Unbleached
Other
Terry towelling and similar woven terry fabrics, of other textile materials
Tufted textile fabrics
Gauze, other than narrow fabrics of heading|5806
Of cotton
Manufactured on handlooms
Other
Gauze of cotton, of a width of less than 1|500|mm
Other
Of silk or silk waste
Manufactured on handlooms
Other
Other
Of synthetic fibres
Of artificial fibres
Other
Tulles and other net fabrics, not including woven, knitted or crocheted fabrics; lace in the piece, in strips or in motifs, other than fabrics of headings|6002|to 6006
Tulles and other net fabrics
Plain
Other
Mechanically made lace
Of man-made fibres
Made on mechanical bobbin machines
Other
Of other textile materials
Made on mechanical bobbin machines
Other
Handmade lace
Hand-woven tapestries of the type Gobelins, Flanders, Aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made up
Narrow woven fabrics, other than goods of heading|5807; narrow fabrics consisting of warp without weft assembled by means of an adhesive (bolducs)
Woven pile fabrics (including terry towelling and similar terry fabrics) and chenille fabrics
Of silk, of noil silk or of other silk waste
Of other textile materials
Other woven fabrics, containing by weight 5|% or more of elastomeric yarn or rubber thread
Other woven fabrics
Of cotton
Of man-made fibres
With real selvedges
Other
Of other textile materials
Of jute or of other textile bast fibres of heading 5303
Other
Fabrics consisting of warp without weft assembled by means of an adhesive (bolducs)
Of jute or of other textile bast fibres of heading 5303
Other
Labels, badges and similar articles of textile materials, in the piece, in strips or cut to shape or size, not embroidered
Woven
With woven inscription
Other
Other
Of felt or nonwovens
Of felt
Other
Other
Braids in the piece; ornamental trimmings in the piece, without embroidery, other than knitted or crocheted; tassels, pompons and similar articles
Braids, in the piece
Other
Woven fabrics of metal thread and woven fabrics of metallised yarn of heading|5605, of a kind used in apparel, as furnishing fabrics or for similar purposes, not elsewhere specified or included
Embroidery in the piece, in strips or in motifs
Embroidery without visible ground
Of a value exceeding €|35/kg (net weight)
Hand-made
Other
Other
Hand-made
Other
Other embroidery
Of cotton
Of a value exceeding €|17,50/kg (net weight)
Hand-made
Other
Other
Hand-made
Other
Of man-made fibres
Of a value exceeding €|17,50/kg (net weight)
Hand-made
Other
Other
Hand-made
Other
Of other textile materials
Of a value exceeding €|17,50/kg (net weight)
Hand-made
Other
Other
Hand-made
Other
Quilted textile products in the piece, composed of one or more layers of textile materials assembled with padding by stitching or otherwise, other than embroidery of heading|5810
Knitted or crocheted
Other
Of cotton
Of synthetic filaments
Of artificial filaments
Other
IMPREGNATED, COATED, COVERED OR LAMINATED TEXTILE FABRICS; TEXTILE ARTICLES OF A KIND SUITABLE FOR INDUSTRIAL USE
Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundations
Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like
Other
Tyre cord fabric of high-tenacity yarn of nylon or other polyamides, polyesters or viscose rayon
Of nylon or other polyamides
Impregnated with rubber
Other
Of polyesters
Impregnated with rubber
Other
Other
Impregnated with rubber
Other
Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading|5902
With poly(vinyl chloride)
Impregnated
Coated, covered or laminated
Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres
Other
With polyurethane
Impregnated
Coated, covered or laminated
Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres
Other
Other
Impregnated
Coated, covered or laminated
With cellulose derivatives or other plastics, with the fabric forming the right side
Other
Woven polytetrafluoroethylene fabric, coated or covered with a copolymer of tetrafluoroethylene and trifluoroethylene having perfluorinated alkoxy side-chains ending in carboxylic acid or sulphonic acid groups, whether or not in the potassium or sodium salt form
Knitted or woven fabrics, coated or covered on one side with artificial plastic material in which are embedded microspheres
Other
Linoleum, whether or not cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shape
Linoleum
Other
Textile wall coverings
Consisting of parallel yarns, fixed on a backing of any material
Other
Of flax
Of jute
Of man-made fibres
Woven, of synthetic fibres (staple or waste)
Woven, of continuous artificial fibres
Woven, of artificial staple fibres
Nonwovens
Felt
Other
Other
Of other textile bast fibres of heading 5303
Of silk
Other
Rubberised textile fabrics, other than those of heading|5902
Adhesive tape of a width not exceeding 20|cm
Other
Knitted or crocheted
Other
Fabrics mentioned in note|4(c) to this chapter
Other
Rubberised textile fabric, consisting of warp yarns of polyamide-6,6|and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4'-oxybis(phenyleneamine)
Other
Textile fabrics otherwise impregnated, coated or covered; painted canvas being theatrical scenery, studio backcloths or the like
Textile fabrics, coated with adhesive in which are embedded spheres of a diameter not exceeding 150|µm
Other
Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas-mantle fabric therefor, whether or not impregnated
Textile hosepiping and similar textile tubing, with or without lining, armour or accessories of other materials
Of synthetic fibres
Of other textile materials
Transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material
Textile products and articles, for technical uses, specified in note|7|to this chapter
Textile fabrics, felt and felt-lined woven fabrics, coated, covered or laminated with rubber, leather or other material, of a kind used for card clothing, and similar fabrics of a kind used for other technical purposes, including narrow fabrics made of velvet impregnated with rubber, for covering weaving spindles (weaving beams)
Needle-punched synthetic-fibre felts, not containing polyester, whether or not containing catalytic particles entrapped within the synthetic fibres, coated or covered on one side with polytetrafluoroethylene film, for the manufacture of filtration products
Other
Bolting cloth, whether or not made up
Of silk
Of other textile materials
Textile fabrics and felts, endless or fitted with linking devices, of a kind used in paper-making or similar machines (for example, for pulp or asbestos-cement)
Weighing less than 650|g/m$2
Of silk or man-made fibres
Woven fabrics, of a kind used in papermaking machines (for example, forming fabrics)
Other
Of other textile materials
Weighing 650|g/m$2|or more
Of silk or man-made fibres
Woven fabrics having a batt layer needled on them, of a kind used in papermaking machines (for example, press felts)
Other
Of other textile materials
Straining cloth of a kind used in oil-presses or the like, including that of human hair
Other
Of felt
Other
Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4|mm, whether or not housed in a cylinder of a wall-thickness of 5|mm or more
Multi-layered non-woven polyester polishing pads, impregnated with polyurethane
Self-adhesive circular polishing pads of a kind used for the manufacture of semiconductor wafers
Other
KNITTED OR CROCHETED FABRICS
Pile fabrics, including 'long pile' fabrics and terry fabrics, knitted or crocheted
'Long pile' fabrics
Of synthetic fibres
Of wool or fine animal hair, of cotton or of artificial fibres
Other
Looped pile fabrics
Of cotton
Of man-made fibres
Of other textile materials
Of wool or fine animal hair
Other
Other
Of cotton
Of man-made fibres
Of other textile materials
Of wool or fine animal hair
Other
Knitted or crocheted fabrics of a width not exceeding 30|cm, containing by weight 5|% or more of elastomeric yarn or rubber thread, other than those of heading|6001
Containing by weight 5|% or more of elastomeric yarn, but not containing rubber thread
Of synthetic fibres
Other
Of wool, of cotton or artificial fibres
Other
Other
Knitted or crocheted fabrics of a width not exceeding 30|cm, other than those of heading|6001|or 6002
Of wool or fine animal hair
Of cotton
Of synthetic fibres
Raschel lace
Other
Of artificial fibres
Other
Knitted or crocheted fabrics of a width exceeding 30|cm, containing by weight 5|% or more of elastomeric yarn or rubber thread, other than those of heading|6001
Containing by weight 5|% or more of elastomeric yarn, but not containing rubber thread
Of synthetic fibres
Other
Of wool, of cotton or artificial fibres
Other
Other
Warp knit fabrics (including those made on galloon knitting machines), other than those of headings|6001|to 6004
Of cotton
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
Of synthetic fibres
Unbleached or bleached
For curtains, including net curtain fabric
Raschel lace, other than for curtains or net curtain fabric
Other
Dyed
For curtains, including net curtain fabric
Raschel lace, other than for curtains or net curtain fabric
Other
Of yarns of different colours
For curtains, including net curtain fabric
Raschel lace, other than for curtains or net curtain fabric
Other
Printed
For curtains, including net curtain fabric
Raschel lace, other than for curtains or net curtain fabric
Other
Of artificial fibres
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
Other
Of wool or fine animal hair
Other
Other knitted or crocheted fabrics
Of wool or fine animal hair
Of cotton
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
Of synthetic fibres
Unbleached or bleached
For curtains, including net curtain fabric
Other
Dyed
For curtains, including net curtain fabric
Other
Of yarns of different colours
For curtains, including net curtain fabric
Other
Printed
For curtains, including net curtain fabric
Other
Of artificial fibres
Unbleached or bleached
Dyed
Of yarns of different colours
Printed
Other
ARTICLES OF APPAREL AND CLOTHING ACCESSORIES, KNITTED OR CROCHETED
Men's or boys' overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, knitted or crocheted, other than those of heading|6103
Of cotton
Overcoats, car coats, capes, cloaks and similar articles
Anoraks (including ski jackets), windcheaters, wind-jackets and similar articles
Of man-made fibres
Overcoats, car coats, capes, cloaks and similar articles
Anoraks (including ski jackets), windcheaters, wind-jackets and similar articles
Of other textile materials
Overcoats, car coats, capes, cloaks and similar articles
Of wool or fine animal hair
Hand-made ponchos of fine animal hair
Other
Other
Anoraks (including ski jackets), windcheaters, wind-jackets and similar articles
Of wool or fine animal hair
Other
Women's or girls' overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, knitted or crocheted, other than those of heading|6104
Of wool or fine animal hair
Overcoats, car coats, capes, cloaks and similar articles
Hand-made ponchos of fine animal hair
Other
Anoraks (including ski jackets), windcheaters, wind-jackets and similar articles
Of cotton
Overcoats, car coats, capes, cloaks and similar articles
Anoraks (including ski jackets), windcheaters, wind-jackets and similar articles
Of man-made fibres
Overcoats, car coats, capes, cloaks and similar articles
Anoraks (including ski jackets), windcheaters, wind-jackets and similar articles
Of other textile materials
Overcoats, car coats, capes, cloaks and similar articles
Anoraks (including ski jackets), windcheaters, wind-jackets and similar articles
Men's or boys' suits, ensembles, jackets, blazers, trousers, bib and brace overalls, breeches and shorts (other than swimwear), knitted or crocheted
Suits
Of wool or fine animal hair
Of other textile materials
Ensembles
Of cotton
Of synthetic fibres
Of other textile materials
Jackets and blazers
Of wool or fine animal hair
Of cotton
Of synthetic fibres
Of other textile materials
Of artificial fibres
Other
Trousers, bib and brace overalls, breeches and shorts
Of wool or fine animal hair
Of cotton
Of synthetic fibres
Of other textile materials
Trousers and breeches
Other
Of artificial fibres
Other
Women's or girls' suits, ensembles, jackets, blazers, dresses, skirts, divided skirts, trousers, bib and brace overalls, breeches and shorts (other than swimwear), knitted or crocheted
Suits
Of synthetic fibres
Of other textile materials
Of cotton
Of other textile materials
Of artificial fibres
Of wool or fine animal hair
Other
Ensembles
Of cotton
Of synthetic fibres
Of other textile materials
Of wool or fine animal hair
Of other textile materials
Of artificial fibres
Other
Jackets and blazers
Of wool or fine animal hair
Of cotton
Of synthetic fibres
Of other textile materials
Of artificial fibres
Other
Dresses
Of wool or fine animal hair
Of cotton
Of synthetic fibres
Of artificial fibres
Of other textile materials
Skirts and divided skirts
Of wool or fine animal hair
Of cotton
Of synthetic fibres
Of other textile materials
Trousers, bib and brace overalls, breeches and shorts
Of wool or fine animal hair
Of cotton
Of synthetic fibres
Of other textile materials
Trousers and breeches
Other
Of artificial fibres
Other
Men's or boys' shirts, knitted or crocheted
Of cotton
Of man-made fibres
Of synthetic fibres
Of artificial fibres
Of other textile materials
Of wool or fine animal hair
Of other textile materials
Women's or girls' blouses, shirts and shirt-blouses, knitted or crocheted
Of cotton
Of man-made fibres
Of other textile materials
Of wool or fine animal hair
Of silk or silk waste
Of flax or of ramie
Of other textile materials
Men's or boys' underpants, briefs, nightshirts, pyjamas, bathrobes, dressing gowns and similar articles, knitted or crocheted
Underpants and briefs
Of cotton
Of man-made fibres
Of other textile materials
Nightshirts and pyjamas
Of cotton
Of man-made fibres
Of other textile materials
Other
Of cotton
Of other textile materials
Of wool or fine animal hair
Of man-made fibres
Other
Women's or girls' slips, petticoats, briefs, panties, nightdresses, pyjamas, négligés, bathrobes, dressing gowns and similar articles, knitted or crocheted
Slips and petticoats
Of man-made fibres
Of other textile materials
Briefs and panties
Of cotton
Of man-made fibres
Of other textile materials
Nightdresses and pyjamas
Of cotton
Of man-made fibres
Of other textile materials
Other
Of cotton
Of man-made fibres
Of other textile materials
Of wool or fine animal hair
Other
T-shirts, singlets and other vests, knitted or crocheted
Of cotton
T-shirts
Other
Of other textile materials
Of wool or fine animal hair or man-made fibres
Of other textile materials
Jerseys, pullovers, cardigans, waistcoats and similar articles, knitted or crocheted
Of wool or fine animal hair
Of wool
Jerseys and pullovers, containing at least 50|% by weight of wool and weighing 600|g or more per article
Other
Men's or boys'
Women's or girls'
Of Kashmir (cashmere) goats
Men's or boys'
Hand-made jerseys, pullovers (with or without sleeves)
Other
Women's or girls'
Hand-made jerseys, pullovers (with or without sleeves)
Other
Other
Men's or boys'
Hand-made jerseys, pullovers (with or without sleeves)
Other
Women's or girls'
Hand-made jerseys, pullovers (with or without sleeves)
Other
Of cotton
Lightweight fine knit roll, polo or turtleneck jumpers and pullovers
Other
Men's or boys'
Women's or girls'
Of man-made fibres
Lightweight fine knit roll, polo or turtleneck jumpers and pullovers
Other
Men's or boys'
Women's or girls'
Of other textile materials
Of flax or ramie
Of other textile materials
Womens' or girls' pullovers of silk or of silk waste
Other
Babies' garments and clothing accessories, knitted or crocheted
Of cotton
Gloves, mittens and mitts
Other
Of synthetic fibres
Gloves, mittens and mitts
Other
Of other textile materials
Of wool or fine animal hair
Gloves, mittens and mitts
Other
Of other textile materials
Of artificial fibres
Gloves, mittens and mitts
Other
Other
Tracksuits, ski suits and swimwear, knitted or crocheted
Tracksuits
Of cotton
Of synthetic fibres
Of other textile materials
Ski suits
Men's or boys' swimwear
Of synthetic fibres
Containing by weight 5|% or more of rubber thread
Other
Of other textile materials
Containing by weight 5|% or more of rubber thread
Other
Women's or girls' swimwear
Of synthetic fibres
Containing by weight 5|% or more of rubber thread
Other
Of other textile materials
Containing by weight 5|% or more of rubber thread
Other
Garments, made up of knitted or crocheted fabrics of heading|5903, 5906|or 5907
Of knitted or crocheted fabrics of heading|5906
Other
Other garments, knitted or crocheted
Of cotton
Of man-made fibres
Of other textile materials
Of wool or fine animal hair
Other
Pantyhose, tights, stockings, socks and other hosiery, including graduated compression hosiery (for example, stockings for varicose veins) and footwear without applied soles, knitted or crocheted
Graduated compression hosiery (for example, stockings for varicose veins)
Of synthetic fibres
Other
Other pantyhose and tights
Of synthetic fibres, measuring per single yarn less than 67|decitex
Of synthetic fibres, measuring per single yarn 67|decitex or more
Of other textile materials
Other women's full-length or knee-length hosiery, measuring per single yarn less than 67|decitex
Of synthetic fibres
Knee-length stockings
Other
Of other textile materials
Other
Of wool or fine animal hair
Of cotton
Of synthetic fibres
Knee-length stockings
Other
Women's stockings
Other
Of other textile materials
Gloves, mittens and mitts, knitted or crocheted
Impregnated, coated or covered with plastics or rubber
Gloves impregnated, coated or covered with rubber
Other
Other
Of wool or fine animal hair
Of cotton
Of synthetic fibres
Of other textile materials
Other made-up clothing accessories, knitted or crocheted; knitted or crocheted parts of garments or of clothing accessories
Shawls, scarves, mufflers, mantillas, veils and the like
Other accessories
Knitted or crocheted, elasticated or rubberised
Other
Parts
ARTICLES OF APPAREL AND CLOTHING ACCESSORIES, NOT KNITTED OR CROCHETED
Men's or boys' overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, other than those of heading|6203
Overcoats, raincoats, car coats, capes, cloaks and similar articles
Of wool or fine animal hair
Hand-made ponchos
Other
Of cotton
Of a weight, per garment, not exceeding 1|kg
Parkas
Other
Of a weight, per garment, exceeding 1|kg
Parkas
Other
Of man-made fibres
Of a weight, per garment, not exceeding 1|kg
Parkas
Other
Of a weight, per garment, exceeding 1|kg
Parkas
Other
Of other textile materials
Other
Of wool or fine animal hair
Of cotton
Hand-printed by the "batik" method
Other
Of man-made fibres
Of other textile materials
Hand-printed by the "batik" method
Other
Women's or girls' overcoats, car coats, capes, cloaks, anoraks (including ski jackets), windcheaters, wind-jackets and similar articles, other than those of heading|6204
Overcoats, raincoats, car coats, capes, cloaks and similar articles
Of wool or fine animal hair
Hand-made ponchos
Hand-made capes of wool
Other
Of cotton
Of a weight, per garment, not exceeding 1|kg
Parkas
Other
Of a weight, per garment, exceeding 1|kg
Parkas
Other
Of man-made fibres
Of a weight, per garment, not exceeding 1|kg
Parkas
Other
Of a weight, per garment, exceeding 1|kg
Parkas
Other
Of other textile materials
Other
Of wool or fine animal hair
Of cotton
Hand-printed by the "batik" method
Other
Of man-made fibres
Of other textile materials
Hand-printed by the "batik" method
Other
Men's or boys' suits, ensembles, jackets, blazers, trousers, bib and brace overalls, breeches and shorts (other than swimwear)
Suits
Of wool or fine animal hair
Of synthetic fibres
Of other textile materials
Of cotton
Of artificial fibres
Of other textile materials
Ensembles
Of cotton
Industrial and occupational
Other
Of synthetic fibres
Industrial and occupational
Other
Of other textile materials
Of artificial fibres
Industrial and occupational
Other
Of wool or fine animal hair
Of other textile materials
Jackets and blazers
Of wool or fine animal hair
Of cotton
Industrial and occupational
Other
Of synthetic fibres
Industrial and occupational
Other
Of other textile materials
Of artificial fibres
Industrial and occupational
Other
Of other textile materials
Trousers, bib and brace overalls, breeches and shorts
Of wool or fine animal hair
Trousers and breeches
Bib and brace overalls
Other
Of cotton
Trousers and breeches
Industrial and occupational
Other
Of denim
Of cut corduroy
Other
Bib and brace overalls
Industrial and occupational
Other
Other
Of synthetic fibres
Trousers and breeches
Industrial and occupational
Other
Bib and brace overalls
Industrial and occupational
Other
Other
Of other textile materials
Of artificial fibres
Trousers and breeches
Industrial and occupational
Other
Bib and brace overalls
Industrial and occupational
Other
Other
Of other textile materials
Women's or girls' suits, ensembles, jackets, blazers, dresses, skirts, divided skirts, trousers, bib and brace overalls, breeches and shorts (other than swimwear)
Suits
Of wool or fine animal hair
Of cotton
Hand-printed by the "batik" method
Other
Of synthetic fibres
Of other textile materials
Of artificial fibres
Of other textile materials
Ensembles
Of wool or fine animal hair
Of cotton
Industrial and occupational
Other
Hand-printed by the "batik" method
Other
Of synthetic fibres
Industrial and occupational
Other
Of other textile materials
Of artificial fibres
Industrial and occupational
Other
Of other textile materials
Hand-printed by the "batik" method
Other
Jackets and blazers
Of wool or fine animal hair
Of cotton
Industrial and occupational
Other
Hand-printed by the "batik" method
Other
Of synthetic fibres
Industrial and occupational
Other
Of other textile materials
Of artificial fibres
Industrial and occupational
Other
Of other textile materials
Hand-printed by the "batik" method
Other
Dresses
Of wool or fine animal hair
Of cotton
Hand-printed by the "batik" method
Other
Of synthetic fibres
Of artificial fibres
Hand-printed by the "batik" method
Other
Of other textile materials
Of silk or silk waste
Of other textile materials
Hand-printed by the "batik" method
Other
Skirts and divided skirts
Of wool or fine animal hair
Of wool
Hand-made
Other
Other
Of cotton
Hand-printed by the "batik" method
Other
Of synthetic fibres
Hand-printed by the "batik" method
Other
Of other textile materials
Of artificial fibres
Hand-printed by the "batik" method
Other
Of other textile materials
Hand-printed by the "batik" method
Other
Trousers, bib and brace overalls, breeches and shorts
Of wool or fine animal hair
Trousers and breeches
Other
Of cotton
Trousers and breeches
Industrial and occupational
Other
Of denim
Hand-printed by the "batik" method
Other
Of cut corduroy
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Bib and brace overalls
Industrial and occupational
Other
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Of synthetic fibres
Trousers and breeches
Industrial and occupational
Other
Hand-printed by the "batik" method
Other
Bib and brace overalls
Industrial and occupational
Other
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Of other textile materials
Of artificial fibres
Trousers and breeches
Industrial and occupational
Other
Hand-printed by the "batik" method
Other
Bib and brace overalls
Industrial and occupational
Other
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Of other textile materials
Hand-printed by the "batik" method
Other
Men's or boys' shirts
Of cotton
Hand-printed by the "batik" method
Other
Of man-made fibres
Of other textile materials
Of flax or ramie
Hand-printed by the "batik" method
Other
Of other textile materials
Of wool or fine animal hair
Other
Women's or girls' blouses, shirts and shirt-blouses
Of silk or silk waste
Of wool or fine animal hair
Of cotton
Hand-printed by the "batik" method
Other
Of man-made fibres
Of other textile materials
Of flax or ramie
Hand-printed by the "batik" method
Other
Of other textile materials
Men's or boys' singlets and other vests, underpants, briefs, nightshirts, pyjamas, bathrobes, dressing gowns and similar articles
Underpants and briefs
Of cotton
Of other textile materials
Nightshirts and pyjamas
Of cotton
Of man-made fibres
Of other textile materials
Other
Of cotton
Bathrobes, dressing gowns and similar articles of terry towelling and similar woven terry fabrics
Other
Hand-printed by the "batik" method
Other
Of other textile materials
Of man-made fibres
Of other textile materials
Hand-printed by the "batik" method
Other
Women's or girls' singlets and other vests, slips, petticoats, briefs, panties, nightdresses, pyjamas, négligés, bathrobes, dressing gowns and similar articles
Slips and petticoats
Of man-made fibres
Of other textile materials
Nightdresses and pyjamas
Of cotton
Of man-made fibres
Of other textile materials
Other
Of cotton
Négligés, bathrobes, dressing gowns and similar articles
Of terry towelling and similar woven terry fabrics
Other
Hand-printed by the "batik" method
Other
Other
Of man-made fibres
Of other textile materials
Hand-printed by the "batik" method
Other
Babies' garments and clothing accessories
Of cotton
Gloves, mittens and mitts
Stockings, socks and sockettes
Other
Of synthetic fibres
Gloves, mittens and mitts
Stockings, socks and sockettes
Other
Of other textile materials
Of wool or fine animal hair
Gloves, mittens and mitts
Stockings, socks and sockettes
Other
Of other textile materials
Gloves, mittens and mitts
Stockings, socks and sockettes
Other
Garments, made up of fabrics of heading|5602, 5603, 5903, 5906|or 5907
Of fabrics of heading|5602|or 5603
Of fabrics of heading|5602
Of fabrics of heading|5603
Single-use gowns, of a kind used by patients or surgeons during surgical procedures
Other
Other garments, of the type described in subheadings|6201|11|to 6201|19
Other garments, of the type described in subheadings|6202|11|to 6202|19
Other men's or boys' garments
Other women's or girls' garments
Tracksuits, ski suits and swimwear; other garments
Swimwear
Men's or boys'
Women's or girls'
Ski suits
Of wool or fine animal hair, of cotton or of man-made fibres
Other
Other garments, men's or boys'
Of cotton
Industrial and occupational clothing
Tracksuits with lining
With an outer shell of a single identical fabric
Other
Upper parts
Lower parts
Other
Of man-made fibres
Industrial and occupational clothing
Tracksuits with lining
With an outer shell of a single identical fabric
Other
Upper parts
Lower parts
Other
Of other textile materials
Of wool or fine animal hair
Other
Other garments, women's or girls'
Of cotton
Aprons, overalls, smock-overalls and other industrial and occupational clothing (whether or not also suitable for domestic use)
Tracksuits with lining
With an outer shell of a single identical fabric
Other
Upper parts
Lower parts
Other
Of man-made fibres
Aprons, overalls, smock-overalls and other industrial and occupational clothing (whether or not also suitable for domestic use)
Tracksuits with lining
With an outer shell of a single identical fabric
Other
Upper parts
Lower parts
Other
Of other textile materials
Brassières, girdles, corsets, braces, suspenders, garters and similar articles and parts thereof, whether or not knitted or crocheted
Brassières
In a set made up for retail sale containing a brassière and a pair of briefs
Other
Girdles and panty girdles
Corselettes
Other
Handkerchiefs
Of cotton
Hand-made
Other
Of other textile materials
Of silk or silk waste
Other
Shawls, scarves, mufflers, mantillas, veils and the like
Of silk or silk waste
Hand-made
Other
Of wool or fine animal hair
Hand-made
Other
Of synthetic fibres
Hand-made
Other
Of artificial fibres
Hand-made
Other
Of other textile materials
Of cotton
Hand-made
Other
Other
Hand-made
Other
Ties, bow ties and cravats
Of silk or silk waste
Hand-made
Other
Of man-made fibres
Hand-made
Other
Of other textile materials
Hand-made
Other
Gloves, mittens and mitts
Other made-up clothing accessories; parts of garments or of clothing accessories, other than those of heading|6212
Accessories
Hand-made
Other
Parts
OTHER MADE-UP TEXTILE ARTICLES; SETS; WORN CLOTHING AND WORN TEXTILE ARTICLES; RAGS
I. OTHER MADE-UP TEXTILE ARTICLES
Blankets and travelling rugs
Electric blankets
Blankets (other than electric blankets) and travelling rugs, of wool or of fine animal hair
Knitted or crocheted
Other
Hand-made
Other
Blankets (other than electric blankets) and travelling rugs, of cotton
Knitted or crocheted
Other
Hand-made
Other
Blankets (other than electric blankets) and travelling rugs, of synthetic fibres
Knitted or crocheted
Other
Nonwovens
Other
Hand-made
Other
Other blankets and travelling rugs
Knitted or crocheted
Other
Nonwovens
Other
Hand-made
Of artificial fibres
Other
Other
Of artificial fibres
Other
Bedlinen, table linen, toilet linen and kitchen linen
Bedlinen, knitted or crocheted
Other bedlinen, printed
Of cotton
Manufactured on handlooms
Hand-printed by the "batik" method
Other
Other
Hand-printed by the "batik" method
Other
Of man-made fibres
Nonwovens
Other
Mixed with cotton
Manufactured on handlooms
Other
Other
Of other textile materials
Of flax or ramie
Of other textile materials
Other bedlinen
Of cotton
Manufactured on handlooms
Other
Of man-made fibres
Nonwovens
Other
Mixed with cotton
Manufactured on handlooms
Other
Other
Of other textile materials
Of flax or ramie
Of other textile materials
Table linen, knitted or crocheted
Other table linen
Of cotton
Hand-printed by the "batik" method
Other
Of man-made fibres
Nonwovens
Other
Of other textile materials
Of flax
Other
Of ramie
Other
Toilet linen and kitchen linen, of terry towelling or similar terry fabrics, of cotton
Knitted or crocheted
Other
Other
Of cotton
Hand-printed by the "batik" method
Other
Of man-made fibres
Nonwovens
Other
Of other textile materials
Of flax
Other
Of ramie
Other
Curtains (including drapes) and interior blinds; curtain or bed valances
Knitted or crocheted
Of synthetic fibres
Of other textile materials
Other
Of cotton
Net curtains
Other
Hand-printed by the "batik" method
Other
Of synthetic fibres
Nonwovens
Other
Net curtains
Other
Of other textile materials
Nonwovens
Other
Of flax or ramie
Other
Net curtains
Curtains (including drapes) of wool
Hand-made
Other
Other
Other furnishing articles, excluding those of heading|9404
Bedspreads
Knitted or crocheted
Other
Of cotton
Hand-printed by the "batik" method
Other
Of flax or ramie
Of other textile materials
Nonwovens
Other
Of wool or man-made fibres
Other
Other
Knitted or crocheted
Not knitted or crocheted, of cotton
Hand-printed by the "batik" method
Other
Not knitted or crocheted, of synthetic fibres
Nonwovens
Other
Not knitted or crocheted, of other textile materials
Of flax or of ramie
Other
Nonwovens
Other
Of wool or artificial fibres
Other
Sacks and bags, of a kind used for the packing of goods
Of jute or of other textile bast fibres of heading|5303
Used
Other
Of cotton
Knitted or crocheted
Other
Of man-made textile materials
Flexible intermediate bulk containers
Of polyethylene or polypropylene strip or the like
Knitted or crocheted
Other
Other
Nonwovens
Other
Knitted or crocheted
Other
Other, of polyethylene or polypropylene strip or the like
Knitted or crocheted
Other
Other
Nonwovens
Other
Knitted or crocheted
Other
Of other textile materials
Knitted or crocheted
Sacks and bags, of a kind used for the packing of goods, used, of flax or of sisal
Other
Other
used, of flax
Other
Tarpaulins, awnings and sunblinds; tents; sails for boats, sailboards or landcraft; camping goods
Tarpaulins, awnings and sunblinds
Of synthetic fibres
Of other textile materials
Tents
Of synthetic fibres
Of other textile materials
Sails
Pneumatic mattresses
Other
Of cotton
Hammocks, hand-made
Other
Of other textile materials
Other made-up articles, including dress patterns
Floorcloths, dishcloths, dusters and similar cleaning cloths
Knitted or crocheted
Nonwovens
Other
Hand-made
Other
Life jackets and lifebelts
Other
Knitted or crocheted
Other
Of felt
Other
Single-use drapes made up of fabrics of heading|5603, of a kind used during surgical procedures
Other
Nonwovens
Other
Hand-made
Other
II. SETS
Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered tablecloths or serviettes, or similar textile articles, put up in packings for retail sale
Of cotton
Of synthetic fibres (staple or waste)
Other
III. WORN CLOTHING AND WORN TEXTILE ARTICLES; RAGS
Worn clothing and other worn articles
Used or new rags, scrap twine, cordage, rope and cables and worn-out articles of twine, cordage, rope or cables, of textile materials
Sorted
Other
FOOTWEAR, GAITERS AND THE LIKE; PARTS OF SUCH ARTICLES
Waterproof footwear with outer soles and uppers of rubber or of plastics, the uppers of which are neither fixed to the sole nor assembled by stitching, riveting, nailing, screwing, plugging or similar processes
Footwear incorporating a protective metal toecap
Other footwear
Covering the ankle but not covering the knee
With uppers of rubber
With uppers of plastics
Other
Covering the knee
Other
Other footwear with outer soles and uppers of rubber or plastics
Sports footwear
Ski-boots, cross-country ski footwear and snowboard boots
Ski-boots and cross-country ski footwear
Snowboard boots
Other
Footwear with upper straps or thongs assembled to the sole by means of plugs
Other footwear
Covering the ankle
Incorporating a protective metal toecap
Other
Other
Incorporating a protective metal toecap
Other
With uppers of rubber
With uppers of plastics
Footwear with a vamp made of straps or which has one or several pieces cut out
With sole and heel combined having a height of more than 3|cm
Other
Slippers and other indoor footwear
Other, with insoles of a length
Of less than 24|cm
Of 24|cm or more
Footwear which cannot be identified as men's or women's footwear
Other
For men
For women
Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of leather
Sports footwear
Ski-boots, cross-country ski footwear and snowboard boots
Other
Footwear with outer soles of leather, and uppers which consist of leather straps across the instep and around the big toe
Other footwear, incorporating a protective metal toecap
Other footwear with outer soles of leather
Covering the ankle
Made on a base or platform of wood, not having an inner sole
Hand-made
Other
Other
Covering the ankle but no part of the calf, with insoles of a length
Of less than 24|cm
Of 24|cm or more
For men
For women
Other, with insoles of a length
Of less than 24|cm
Of 24|cm or more
For men
For women
Other
Made on a base or platform of wood, not having an inner sole
Hand-made
Other
Other
Footwear with a vamp made of straps or which has one or several pieces cut out
With sole and heel combined having a height of more than 3|cm
Other, with insoles of a length
Of less than 24|cm
Of 24|cm or more
For men
For women
Slippers and other indoor footwear
Other, with insoles of a length
Of less than 24|cm
Of 24|cm or more
For men
For women
Other footwear
Covering the ankle
Made on a base or platform of wood, not having an inner sole
Hand-made
Other
Other
Covering the ankle but no part of the calf, with insoles of a length
Of less than 24|cm
Of 24|cm or more
Footwear which cannot be identified as men's or women's footwear
Other
For men
For women
Other, with insoles of a length
Of less than 24|cm
Of 24|cm or more
Footwear which cannot be identified as men's or women's footwear
Other
For men
For women
Other
Made on a base or platform of wood, not having an inner sole
Hand-made
Other
Other
Footwear with a vamp made of straps or which has one or several pieces cut out
With sole and heel combined having a height of more than 3|cm
Other, with insoles of a length
Of less than 24|cm
Of 24|cm or more
Footwear which cannot be identified as men's or women's footwear
Other
For men
For women
Slippers and other indoor footwear
Other, with insoles of a length
Of less than 24|cm
Of 24|cm or more
Footwear which cannot be identified as men's or women's footwear
Other
For men
For women
Footwear with outer soles of rubber, plastics, leather or composition leather and uppers of textile materials
Footwear with outer soles of rubber or plastics
Sports footwear; tennis shoes, basketball shoes, gym shoes, training shoes and the like
Other
Slippers and other indoor footwear
Other
Footwear with outer soles of leather or composition leather
Slippers and other indoor footwear
Other
Other footwear
With uppers of leather or composition leather
With uppers of textile materials
With outer soles of wood or cork
With outer soles of other materials
Slippers and other indoor footwear
Other
Other
With outer soles of rubber, plastics, leather or composition leather
With outer soles of other materials
Parts of footwear (including uppers whether or not attached to soles other than outer soles); removable insoles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereof
Uppers and parts thereof, other than stiffeners
Of leather
Hand-made
Other
Of other materials
Hand-made
Other
Outer soles and heels, of rubber or plastics
Of rubber
Hand-made
Other
Of plastics
Hand-made
Other
Other
Assemblies of uppers affixed to inner soles or to other sole components, but without outer soles
Hand-made
Other
Removable insoles and other removable accessories
Hand-made
Other
Outer soles of leather or composition leather
Hand-made
Other
Other
Gaiters, leggings and similar articles and parts thereof
Other
Hand-made
Other
HEADGEAR AND PARTS THEREOF
Hat-forms, hat bodies and hoods of felt, neither blocked to shape nor with made brims; plateaux and manchons (including slit manchons), of felt
Hat-shapes, plaited or made by assembling strips of any material, neither blocked to shape, nor with made brims, nor lined, nor trimmed
Hats and other headgear, plaited or made by assembling strips of any material, whether or not lined or trimmed
Hats and other headgear, knitted or crocheted, or made up from lace, felt or other textile fabric, in the piece (but not in strips), whether or not lined or trimmed; hairnets of any material, whether or not lined or trimmed
Of fur felt or of felt of wool and fur, made from the hat bodies, hoods or plateaux of heading|6501|00|00
Other
Peaked caps
Other
Berets, in wool, hand-made
Other
Other headgear, whether or not lined or trimmed
Safety headgear
Of plastics
Of other materials
Other
Of rubber or of plastics
Of other materials
Of fur felt or of felt of wool and fur, made from the hat bodies, hoods or plateaux of heading|6501|00|00
Other
Headbands, linings, covers, hat foundations, hat frames, peaks and chinstraps, for headgear
UMBRELLAS, SUN UMBRELLAS, WALKING STICKS, SEAT-STICKS, WHIPS, RIDING-CROPS AND PARTS THEREOF
Umbrellas and sun umbrellas (including walking-stick umbrellas, garden umbrellas and similar umbrellas)
Garden or similar umbrellas
Other
Having a telescopic shaft
Other
With a cover of woven textile materials
Other
Walking sticks, seat-sticks, whips, riding-crops and the like
Hand-made
Other
Parts, trimmings and accessories of articles of heading|6601|or 6602
Umbrella frames, including frames mounted on shafts (sticks)
Other
Handles and knobs
Other
PREPARED FEATHERS AND DOWN AND ARTICLES MADE OF FEATHERS OR OF DOWN; ARTIFICIAL FLOWERS; ARTICLES OF HUMAN HAIR
Skins and other parts of birds with their feathers or down, feathers, parts of feathers, down and articles thereof (other than goods of heading|0505|and worked quills and scapes)
Artificial flowers, foliage and fruit and parts thereof; articles made of artificial flowers, foliage or fruit
Of plastics
Of other materials
Human hair, dressed, thinned, bleached or otherwise worked; wool or other animal hair or other textile materials, prepared for use in making wigs or the like
Wigs, false beards, eyebrows and eyelashes, switches and the like, of human or animal hair or of textile materials; articles of human hair not elsewhere specified or included
Of synthetic textile materials
Complete wigs
Other
Of human hair
Of other materials
ARTICLES OF STONE, PLASTER, CEMENT, ASBESTOS, MICA OR SIMILAR MATERIALS
Setts, curbstones and flagstones, of natural stone (except slate)
Worked monumental or building stone (except slate) and articles thereof, other than goods of heading|6801; mosaic cubes and the like, of natural stone (including slate), whether or not on a backing; artificially coloured granules, chippings and powder, of natural stone (including slate)
Tiles, cubes and similar articles, whether or not rectangular (including square), the largest surface area of which is capable of being enclosed in a square the side of which is less than 7|cm; artificially coloured granules, chippings and powder
Other monumental or building stone and articles thereof, simply cut or sawn, with a flat or even surface
Marble, travertine and alabaster
Granite
Other stone
Other
Marble, travertine and alabaster
Hand-made, carved
Other
Other calcareous stone
Hand-made, carved
Other
Granite
Polished, decorated or otherwise worked, but not carved, of a net weight of 10|kg or more
Other
Hand-made, carved
Other
Other stone
Polished, decorated or otherwise worked, but not carved, of a net weight of 10|kg or more
Other
Hand-made, carved
Other
Worked slate and articles of slate or of agglomerated slate
Roofing and wall slates
Other
Millstones, grindstones, grinding wheels and the like, without frameworks, for grinding, sharpening, polishing, trueing or cutting, hand sharpening or polishing stones, and parts thereof, of natural stone, of agglomerated natural or artificial abrasives, or of ceramics, with or without parts of other materials
Millstones and grindstones for milling, grinding or pulping
Other millstones, grindstones, grinding wheels and the like
Of agglomerated synthetic or natural diamond
Discs -|of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy, -|having a self-sharpening effect by constant release of the diamonds, -|suitable for abrasive cutting of wafers, -|whether or not containing a hole in the centre, -|whether or not on a support -|with a weight of not more than 377|g per piece and -|with an external diameter of not more than 206|mm
Other
Of other agglomerated abrasives or of ceramics
Of artificial abrasives, with binder
Of synthetic or artificial resin
Not reinforced
Reinforced
Of ceramics or silicates
Of other materials
Other
Of natural stone
Hand sharpening or polishing stones
Natural or artificial abrasive powder or grain, on a base of textile material, of paper, of paperboard or of other materials, whether or not cut to shape or sewn or otherwise made up
On a base of woven textile fabric only
On a base of paper or paperboard only
On a base of other materials
Slag-wool, rock-wool and similar mineral wools; exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials; mixtures and articles of heat-insulating, sound-insulating or sound-absorbing mineral materials, other than those of heading|6811|or 6812|or of Chapter|69
Slag-wool, rock-wool and similar mineral wools (including intermixtures thereof), in bulk, sheets or rolls
Exfoliated vermiculite, expanded clays, foamed slag and similar expanded mineral materials (including intermixtures thereof)
Expanded clays
Other
Other
Articles of asphalt or of similar material (for example, petroleum bitumen or coal tar pitch)
In rolls
Other
Panels, boards, tiles, blocks and similar articles of vegetable fibre, of straw or of shavings, chips, particles, sawdust or other waste of wood, agglomerated with cement, plaster or other mineral binders
Articles of plaster or of compositions based on plaster
Boards, sheets, panels, tiles and similar articles, not ornamented
Faced or reinforced with paper or paperboard only
Other
Other articles
Articles of cement, of concrete or of artificial stone, whether or not reinforced
Tiles, flagstones, bricks and similar articles
Building blocks and bricks
Of light concrete (with a basis of crushed pumice, granulated slag, etc.)
Other
Other
Other articles
Prefabricated structural components for building or civil engineering
Other
Articles of asbestos-cement, of cellulose fibre-cement or the like
Containing asbestos
Not containing asbestos
Corrugated sheets
Other sheets, panels, tiles and similar articles
Other articles
Fabricated asbestos fibres; mixtures with a basis of asbestos or with a basis of asbestos and magnesium carbonate; articles of such mixtures or of asbestos (for example, thread, woven fabric, clothing, headgear, footwear, gaskets), whether or not reinforced, other than goods of heading|6811|or 6813
Of crocidolite
Fabricated fibres; mixtures with a basis of asbestos or with a basis of asbestos and magnesium carbonate
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other
Clothing, clothing accessories, footwear and headgear
Paper, millboard and felt
Compressed asbestos fibre jointing, in sheets or rolls
Other
Fabricated asbestos fibres; mixtures with a basis of asbestos or with a basis of asbestos and magnesium carbonate
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Friction material and articles thereof (for example, sheets, rolls, strips, segments, discs, washers, pads), not mounted, for brakes, for clutches or the like, with a basis of asbestos, of other mineral substances or of cellulose, whether or not combined with textile or other materials
Containing asbestos
For use in civil aircraft
Other
Not containing asbestos
Brake linings and pads
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Friction material, of a thickness of less than 20|mm, not mounted, for use in the manufacture of friction components
Other
Worked mica and articles of mica, including agglomerated or reconstituted mica, whether or not on a support of paper, paperboard or other materials
Plates, sheets and strips of agglomerated or reconstituted mica, whether or not on a support
Agglomerated mica with a thickness of not more than 0,15|mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres
Other
Other
Articles of stone or of other mineral substances (including carbon fibres, articles of carbon fibres and articles of peat), not elsewhere specified or included
Non-electrical articles of graphite or other carbon
Carbon fibres and articles of carbon fibres
Other
Articles of peat
Other articles
Containing magnesite, dolomite or chromite
Other
CERAMIC PRODUCTS
I. GOODS OF SILICEOUS FOSSIL MEALS OR OF SIMILAR SILICEOUS EARTHS, AND REFRACTORY GOODS
Bricks, blocks, tiles and other ceramic goods of siliceous fossil meals (for example, kieselguhr, tripolite or diatomite) or of similar siliceous earths
Refractory bricks, blocks, tiles and similar refractory ceramic constructional goods, other than those of siliceous fossil meals or similar siliceous earths
Containing, by weight, singly or together, more than 50|% of the elements Mg, Ca or Cr, expressed as MgO, CaO or Cr@2O@3
Containing, by weight, more than 50|% of alumina (Al@2O@3), of silica (SiO@2) or of a mixture or compound of these products
Containing, by weight, 93|% or more of silica (SiO@2)
Other
Containing, by weight, more than 7|% but less than 45|% of alumina (Al@2O@3)
Other
Other
Refractory bricks with - an edge length of more than 300 mm and - a TiO@2 content of not more than 1% by weight and - a Al@2O@3 content of not more than 0.4% by weight and - a change in volume of less than 9% at 1700°C
Other
Other refractory ceramic goods (for example, retorts, crucibles, muffles, nozzles, plugs, supports, cupels, tubes, pipes, sheaths and rods), other than those of siliceous fossil meals or of similar siliceous earths
Containing, by weight, more than 50|% of graphite or other carbon or of a mixture of these products
Containing, by weight, more than 50|% of alumina (Al@2O@3) or of a mixture or compound of alumina and of silica (SiO@2)
Containing, by weight, less than 45|% of alumina (Al@2O@3)
Containing, by weight, 45|% or more of alumina (Al@2O@3)
Other
Containing, by weight, more than 25|% but not more than 50|% of graphite or other carbon or of a mixture of these products
Other
Silicon carbide reactor tubes and holders, of a kind used for insertion into diffusion and oxidation furnaces for production of semiconductor materials
Other
II. OTHER CERAMIC PRODUCTS
Ceramic building bricks, flooring blocks, support or filler tiles and the like
Building bricks
Other
Roofing tiles, chimney pots, cowls, chimney liners, architectural ornaments and other ceramic constructional goods
Roofing tiles
Other
Ceramic pipes, conduits, guttering and pipe fittings
Unglazed ceramic flags and paving, hearth or wall tiles; unglazed ceramic mosaic cubes and the like, whether or not on a backing
Tiles, cubes and similar articles, whether or not rectangular, the largest surface area of which is capable of being enclosed in a square the side of which is less than 7|cm
Other
Stoneware
Other
Glazed ceramic flags and paving, hearth or wall tiles; glazed ceramic mosaic cubes and the like, whether or not on a backing
Tiles, cubes and similar articles, whether or not rectangular, the largest surface area of which is capable of being enclosed in a square the side of which is less than 7|cm
Other
Of common pottery
Double tiles of the 'Spaltplatten' type
Other
Other
Double tiles of the 'Spaltplatten' type
Other
With a face of not more than 90|cm$2
Other
Stoneware
Earthenware or fine pottery
Other
Ceramic wares for laboratory, chemical or other technical uses; ceramic troughs, tubs and similar receptacles of a kind used in agriculture; ceramic pots, jars and similar articles of a kind used for the conveyance or packing of goods
Ceramic wares for laboratory, chemical or other technical uses
Of porcelain or china
Articles having a hardness equivalent to 9|or more on the Mohs scale
Other
Ceramic ring with rectangular transversal section having an external diameter of 19|mm or more (+|0,00|mm/-|0,10|mm) but not more than 29|mm (+ 0,00|mm/-|0,20|mm), an internal diameter of 10|mm or more (+|0,00|mm/- 0,20|mm) but not more than 19|mm (+ 0,00|mm/-0,30|mm), a thickness variable from 2|mm (±|0,10|mm) to 3,70|mm (± 0,20|mm) and heat resistance 240|°C or more, containing by weight: -|90|% (±|1,5|%) of aluminium oxide -|7|% (±|1|%) of titanium oxide
Silicon nitride (Si3N4) rollers or balls
Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide
Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65|l, having, per cm$2|of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end
Ceramic articles made of continuous filaments of ceramic oxides, containing by weight: -|2|% or more of diboron trioxide, -|28|% or less of silicon dioxide and -|60|% or more of dialuminium trioxide
Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9|on the Mohs scale, with a total volume of not more than 65|litres, having, per cm$2|of the surface of the cross section one or more closed channels at the tail end
Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65|litres and at least one duct (open on one or both ends) per cm$2|of cross section
Ceramic heat sinks, containing by weight: -|66|% or more of silicon carbide, -|10|% or more of aluminium oxide for maintaining the operating temperature of transistors, diodes and integrated circuits in products of headings 8521|or 8528
Other
Other
Ceramic sinks, washbasins, washbasin pedestals, baths, bidets, water closet pans, flushing cisterns, urinals and similar sanitary fixtures
Of porcelain or china
Other
Tableware, kitchenware, other household articles and toilet articles, of porcelain or china
Tableware and kitchenware
Knives; condiment or spice mills and their ceramic grinding parts; peelers; knife sharpeners; cordierite ceramic pizza-stones of a kind used for baking pizza or bread
Other
Other
Ceramic tableware, kitchenware, other household articles and toilet articles, other than of porcelain or china
Tableware and kitchenware
Of common pottery
Hand-made
Tableware and kitchenware, excluding knives, condiment or spice mills and their ceramic grinding parts, peelers, knife sharpeners, cordierite ceramic pizza-stones of a kind used for baking pizza or bread
Other
Other
Tableware and kitchenware, excluding knives, condiment or spice mills and their ceramic grinding parts, peelers, knife sharpeners, cordierite ceramic pizza-stones of a kind used for baking pizza or bread
Other
Stoneware
Tableware and kitchenware, excluding knives, condiment or spice mills and their ceramic grinding parts, peelers, knife sharpeners, cordierite ceramic pizza-stones of a kind used for baking pizza or bread
Other
Earthenware or fine pottery
Tableware and kitchenware, excluding knives, condiment or spice mills and their ceramic grinding parts, peelers, knife sharpeners, cordierite ceramic pizza-stones of a kind used for baking pizza or bread
Other
Other
Tableware and kitchenware, excluding knives, condiment or spice mills and their ceramic grinding parts, peelers, knife sharpeners, cordierite ceramic pizza-stones of a kind used for baking pizza or bread
Other
Other
Of common pottery
Hand-made
Other
Stoneware
Earthenware or fine pottery
Other
Statuettes and other ornamental ceramic articles
Of porcelain or china
hand-made
Other
Other
Of common pottery
hand-made
Other
Other
Earthenware or fine pottery
Hand-made
Other
Other
Hand-made
Other
Other ceramic articles
Of porcelain or china
Other
Of common pottery hand-made
Other
Ceramic articles made of continuous filaments of ceramic oxides, containing by weight: -|2|% or more of diboron trioxide, -|28|% or less of silicon dioxide and -|60|% or more of dialuminium trioxide
Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125|µm
Other
GLASS AND GLASSWARE
Cullet and other waste and scrap of glass; glass in the mass
Cullet and other waste and scrap of glass
Glass in the mass
Optical glass
Other
Glass in balls (other than microspheres of heading|7018), rods or tubes, unworked
Balls
Rods
Of optical glass
Other
Tubes
Of fused quartz or other fused silica
Of other glass having a linear coefficient of expansion not exceeding 5|!x!|10$-$6|per Kelvin within a temperature range of 0|°C to 300|°C
Other
Cast glass and rolled glass, in sheets or profiles, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked
Non-wired sheets
Coloured throughout the mass (body tinted), opacified, flashed or having an absorbent, reflecting or non-reflecting layer
Of optical glass
Other
Having a non-reflecting layer
Other
Other
Of optical glass
Other
Wired sheets
Profiles
Drawn glass and blown glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked
Glass, coloured throughout the mass (body tinted), opacified, flashed or having an absorbent, reflecting or non-reflecting layer
Optical glass
Other
Having a non-reflecting layer
Other
Other glass
Optical glass
Other
Alkali-aluminosilicate drawn flat glass sheet with: -|a scratch proof coating of a thickness of 45|micrometre (+/- 5|micrometre), -|a total thickness of 0,45|mm or more but not more than 1,1|mm, -|a width of 300|mm or more but not more than 3210|mm, -|a length of 300|mm or more but not more than 2|000|mm, -|a visible light transmission of 90|% or more; -|an optical distortion of 55° or more
Other
Float glass and surface ground or polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked
Non-wired glass, having an absorbent, reflecting or non-reflecting layer
Having a non-reflecting layer
Other, of a thickness
Not exceeding 3,5|mm
Exceeding 3,5|mm but not exceeding 4,5|mm
Float glass: -|of a thickness of 4,0|mm or more but not more than 4,2|mm, -|with a light transmission of 91|% or more measured using a D-type light source, -|coated on one surface with a fluorine doped tin dioxide reflective layer
Other
Exceeding 4,5|mm
Other non-wired glass
Coloured throughout the mass (body tinted), opacified, flashed or merely surface ground
Of a thickness not exceeding 3,5|mm
Of a thickness exceeding 3,5|mm but not exceeding 4,5|mm
Of a thickness exceeding 4,5|mm
Other
Of a thickness not exceeding 3,5|mm
Of a thickness exceeding 3,5|mm but not exceeding 4,5|mm
Of a thickness exceeding 4,5|mm
Wired glass
Glass of heading|7003, 7004|or 7005, bent, edge-worked, engraved, drilled, enamelled or otherwise worked, but not framed or fitted with other materials
Optical glass
Other
Glass wafer made of borosilicate float glass -|with a total thickness variation of 1|µm or less, and -|laser-engraved
Float glass: -|with a thickness of 1,7|mm or more but not more than 1,9|mm, -|with light transmission of 91|% or more, measured with a D-type light source, -|coated on one side with fluorine-doped tin dioxide as a reflecting layer, -|with worked edges
Other
Safety glass, consisting of toughened (tempered) or laminated glass
Toughened (tempered) safety glass
Of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels
Of size and shape suitable for incorporation in motor vehicles
Other
Other
Enamelled
Coloured throughout the mass (body tinted), opacified, flashed or having an absorbent or reflecting layer
Glass plate of a diagonal size of 81,28|cm (± 1,5|cm) or more, but not more than 185,42|cm (± 1,5|cm), consisting of tempered glass; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides, for use in the manufacture of products falling within heading 8528
Other
Other
Solar glass consisting of tempered soda-lime-flat-glass, with an iron content of less than 300 ppm, a solar transmittance of more than 88% (measured according to AM1,5 300-2500 nm), a resistance to heat up to 250° C (measured according to EN 12150), a resistance to thermal shocks of Δ 150 K (measured according to EN 12150) and having a mechanical strength of 90 N/mm 2 or more (measured according to EN 1288-3)
Uncoated
Single or double-side coated
Other
Laminated safety glass
Of size and shape suitable for incorporation in vehicles, aircraft, spacecraft or vessels
Of size and shape suitable for incorporation in motor vehicles
Other
Windshields, not framed, for use in civil aircraft
Other
Other
Glass plate of a diagonal size of 81,28|cm (±|1,5|cm) or more, but not more than 185,42|cm (±|1,5|cm), consisting of 2|sandwich plates laminated together; provided either with a mesh film and a near-infrared absorbing film or a sputtered conductive layer, with optional additional anti-reflex layer on one or both sides
Other
Multiple-walled insulating units of glass
Coloured throughout the mass (body tinted), opacified, flashed or having an absorbent or reflecting layer
Other
Consisting of two panels of glass sealed around the edges by an airtight joint and separated by a layer of air, other gases or a vacuum
Other
Glass mirrors, whether or not framed, including rear-view mirrors
Rear-view mirrors for vehicles
Electro-cromic auto-dimming glass for motor vehicle mirrors: -|whether or not equipped with plastic backing plate, -|whether or not equipped with a heating element, -|whether or not equipped with Blind Spot Module (BSM) display
Layered glass with mechanical dimming ability by different angles of incident light comprising: -|whether or not a layer of chrome, -|a break-resistance adhesive tape or hot-melt adhesive, and -|a release film on the front side and protective paper at the back side, of a kind used for interior rear-view mirrors of vehicles
Electrochromic self-dimming inside rear-view mirror, consisting of: -|a mirror support -|a plastic casing and -|an integrated circuit for use in the manufacture of motor vehicles of Chapter 87
Other
Other
Unframed
Unframed glass mirrors with: -|a length of 1516|(±|1|mm); -|a width of 553|(±|1|mm); -|a thickness of 3|(± 0.1|mm); -|the back of the mirror covered with protective polyethylene (PE) film, with a thickness of 0,11|mm or more but not more than|0,13|mm; -|a lead content of not more than 90|mg/kg and -|a corrosion resistance of 72|hours or more according to ISO|9227|salt spray test
Other
Framed
Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glass
Ampoules
Stoppers, lids and other closures
Other
Preserving jars (sterilising jars)
Other
Made from tubing of glass
Other, of a nominal capacity of
2,5|l or more
Less than 2,5|l
For beverages and foodstuffs
Bottles
Of colourless glass, of a nominal capacity of
1|l or more
More than 0,33|l but less than 1|l
0,15|l or more but not more than 0,33|l
Less than 0,15|l
Of coloured glass, of a nominal capacity of
1|l or more
More than 0,33|l but less than 1|l
0,15|l or more but not more than 0,33|l
Less than 0,15|l
Other, of a nominal capacity of
0,25|l or more
Less than 0,25|l
For pharmaceutical products, of a nominal capacity
Exceeding 0,055|l
Not exceeding 0,055|l
For other products
Of colourless glass
Of coloured glass
Glass envelopes (including bulbs and tubes), open, and glass parts thereof, without fittings, for electric lamps, cathode ray tubes or the like
For electric lighting
For cathode ray tubes
Other
Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading|7010|or 7018)
Of glass ceramics
Stemware drinking glasses, other than of glass ceramics
Of lead crystal
Gathered by hand
Gathered mechanically
Other
Gathered by hand
Gathered mechanically
Other drinking glasses, other than of glass ceramics
Of lead crystal
Gathered by hand
Cut or otherwise decorated
Other
Gathered mechanically
Cut or otherwise decorated
Other
Other
Of toughened glass
Other
Gathered by hand
Cut or otherwise decorated
Other
Gathered mechanically
Cut or otherwise decorated
Other
Glassware of a kind used for table (other than drinking glasses) or kitchen purposes other than of glass ceramics
Of lead crystal
Gathered by hand
Gathered mechanically
Of glass having a linear coefficient of expansion not exceeding 5|!x!|10$-$6|per Kelvin within a temperature range of 0|°C to 300|°C
Other
Of toughened glass
Other
Gathered by hand
Gathered mechanically
Other glassware
Of lead crystal
Gathered by hand
Gathered mechanically
Other
Gathered by hand
Other
Signalling glassware and optical elements of glass (other than those of heading|7015), not optically worked
Optical elements of glass (other than those of heading|7015), not optically worked, other than signalling glassware
Other
Clock or watch glasses and similar glasses, glasses for non-corrective or corrective spectacles, curved, bent, hollowed or the like, not optically worked; hollow glass spheres and their segments, for the manufacture of such glasses
Glasses for corrective spectacles
Other
Paving blocks, slabs, bricks, squares, tiles and other articles of pressed or moulded glass, whether or not wired, of a kind used for building or construction purposes; glass cubes and other glass smallwares, whether or not on a backing, for mosaics or similar decorative purposes; leaded lights and the like; multicellular or foam glass in blocks, panels, plates, shells or similar forms
Glass cubes and other glass smallwares, whether or not on a backing, for mosaics or similar decorative purposes
Other
Leaded lights and the like
Blocks and bricks, of a kind used for building or construction purposes
Other
Laboratory, hygienic or pharmaceutical glassware, whether or not graduated or calibrated
Of fused quartz or other fused silica
Of other glass having a linear coefficient of expansion not exceeding 5|!x!|10$-$6|per Kelvin within a temperature range of 0|°C to 300|°C
Other
Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares, and articles thereof other than imitation jewellery; glass eyes other than prosthetic articles; statuettes and other ornaments of lamp-worked glass, other than imitation jewellery; glass microspheres not exceeding 1|mm in diameter
Glass beads, imitation pearls, imitation precious or semi-precious stones and similar glass smallwares
Glass beads
Cut and mechanically polished
Other
hand-made
Other
Imitation pearls
Imitation precious or semi-precious stones
Cut and mechanically polished
Other
Other
Glass microspheres not exceeding 1|mm in diameter
Other
Glass eyes; articles of glass smallware
Other
Glass fibres (including glass wool) and articles thereof (for example, yarn, woven fabrics)
Slivers, rovings, yarn and chopped strands
Chopped strands, of a length of not more than 50|mm
Rovings
Rovings which are impregnated and coated and with a loss on ignition of 3% or more (as determined by the ISO Standard 1887)
Rovings, measuring 2|600|tex or more but not more than 3|300|tex and of a loss on ignition of 4|% or more but not more than 8|% by weight (as determined by the ASTM D 2584-94|method)
Rovings, measuring 650|tex or more but not more than 2|500|tex, coated with a layer of polyurethane whether or not mixed with other materials
Rovings, measuring 392|tex or more but not more than 2|884|tex, coated with a layer of an acrylic copolymer
Rovings ranging from 1|980|to 2|033|tex, composed of continuous glass filaments of 9|μm (±|0,5|µm)
Other
Other
Rovings, measuring 2|600|tex or more but not more than 3|300|tex and of a loss on ignition of 4|% or more but not more than 8|% by weight (as determined by the ASTM D 2584-94|method)
Rovings, measuring 650|tex or more but not more than 2|500|tex, coated with a layer of polyurethane whether or not mixed with other materials
Rovings, measuring 392|tex or more but not more than 2|884|tex, coated with a layer of an acrylic copolymer
Rovings ranging from 1|980|to 2|033|tex, composed of continuous glass filaments of 9|μm (±|0,5|µm)
Other
Other
Of filaments
Yarn of 33|tex or a multiple thereof (±|7,5|%), obtained from continuous spun-glass filaments of a nominal diameter of 3,5|µm or of 4,5|µm, in which filaments of a diameter of 3|µm or more but not more than 5,2|µm predominate, other than those treated so as to improve their adhesion to elastomers
S-glass yarn of 33 tex or a multiple of 33 tex (± 13%) made from continuous spun-glass filaments with fibres of a diameter of 9 µm (- 1 µm / + 1,5 µm)
Yarn of 10,3|tex or more but not more than 11,9|tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4.83|μm or more but not more than 5.83|μm predominate
Yarn of 5.1|tex or more but not more than 6.0|tex, obtained from continuous glass-spun filaments, in which filaments of a diameter of 4.83|µm or more but not more than 5.83|µm predominate
Yarn of E-glass of 22|tex (±|1,6|tex), obtained from continuous spun-glass filaments of a nominal diameter of 7|µm, in which filaments of a diameter of 6,35|µm or more but not more than|7,61|µm predominate
Yarn of 11|tex or a multiple thereof (± 7,5|%), obtained from continuous spun-glass filaments, containing 93|percent by weight or more of silicon dioxide, of a nominal diameter of 6|µm or 9|µm, other than those treated
Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of: -|9|% or more but not more than 16|% of magnesium oxide, -|19|% or more but not more than 25|% of aluminium oxide, -|0|% or more but not more than 2|% of boron oxide, -|without calcium oxide, coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene
High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)
Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)
Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene
Other
Of staple fibres
Thin sheets (voiles), webs, mats, mattresses, boards and similar non-woven products
Mats
Of low moisture absorption capacity, intended for certain types of aircraft
Other
Thin sheets (voiles)
Of low moisture absorption capacity, intended for certain types of aircraft
Other
Other
Boards and similar non-woven products of low moisture absorption capacity, intended for certain types of aircraft
Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts
Other
Woven fabrics of rovings
Woven fabrics of rovings, impregnated with epoxy resin, with a coefficient of thermal expansion between 30°C and 120°C (measured according to IPC-TM-650) of: -|10ppm per°C or more but not more than 12ppm per°C in the length and width, and -|20ppm per°C or more but not more than 30ppm per°C in the thickness, with a glass transition temperature of 152°C or more but not more than 153°C (measured according IPC-TM-650)
Open mesh fabrics of glass fibres, of a cell size of more than 1.8|mm both in length and in width and weighting more than 35|g/m², excluding fibreglass discs
Other
Prepreg sheets or rolls containing polyimide resin
Open mesh fabrics of glass fibres, of a cell size of more than 1,8|mm both in length and in width and weighing more than 35|g/m², excluding fibreglass discs
Other
Other
Open mesh fabrics of glass fibres, of a cell size of more than 1,8|mm both in length and in width and weighing more than 35|g/m², excluding fibreglass discs
Other
Other woven fabrics
Of a width not exceeding 30|cm
Open mesh fabrics of glass fibres, of a cell size of more than 1.8|mm both in length and in width and weighting more than 35|g/m², excluding fibreglass discs
Consigned from Malaysia
Consigned from Taiwan
Consigned from Thailand
Consigned from India
Consigned from Indonesia
Other
Other
Of a width exceeding 30|cm, plain weave, weighing less than 250|g/m$2, of filaments measuring per single yarn not more than 136|tex
Glass web woven from glass fibre coated in plastic, of a weight of 120|g/m$2|(±|10|g/m$2) of a type used in rolling insect screens with fixed frames
Other
Other
Open mesh fabrics of glass fibres, of a cell size of more than 1.8|mm both in length and in width and weighting more than 35|g/m², excluding fibreglass discs
Consigned from Malaysia
Consigned from Taiwan
Consigned from Thailand
Consigned from India
Consigned from Indonesia
Other
Other
Other
Non-textile glass fibres in which fibres of a diameter of less than 4,6|µm predominate
Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)
High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)
Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde resin and chlorosulphonated polyethylene
Other
Other articles of glass
Quartz reactor tubes and holders designed for insertion into diffusion and oxidation furnaces for production of semiconductor materials
Glass inners for vacuum flasks or for other vacuum vessels
Unfinished
Finished
Other
Of fused quartz or other fused silica
Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body
Other
Of glass having a linear coefficient of expansion not exceeding 5|!x!|10$-$6|per Kelvin within a temperature range of 0|°C to 300|°C
Other
NATURAL OR CULTURED PEARLS, PRECIOUS OR SEMI-PRECIOUS STONES, PRECIOUS METALS, METALS CLAD WITH PRECIOUS METAL, AND ARTICLES THEREOF; IMITATION JEWELLERY; COIN
I. NATURAL OR CULTURED PEARLS AND PRECIOUS OR SEMI-PRECIOUS STONES
Pearls, natural or cultured, whether or not worked or graded but not strung, mounted or set; pearls, natural or cultured, temporarily strung for convenience of transport
Natural pearls
Cultured pearls
Unworked
Worked
Diamonds, whether or not worked, but not mounted or set
Unsorted
Industrial
Unworked or simply sawn, cleaved or bruted
Other
Non-industrial
Unworked or simply sawn, cleaved or bruted
Other
Precious stones (other than diamonds) and semi-precious stones, whether or not worked or graded but not strung, mounted or set; ungraded precious stones (other than diamonds) and semi-precious stones, temporarily strung for convenience of transport
Unworked or simply sawn or roughly shaped
Otherwise worked
Rubies, sapphires and emeralds
Other
Synthetic or reconstructed precious or semi-precious stones, whether or not worked or graded but not strung, mounted or set; ungraded synthetic or reconstructed precious or semi-precious stones, temporarily strung for convenience of transport
Piezoelectric quartz
Other, unworked or simply sawn or roughly shaped
Other
Dust and powder of natural or synthetic precious or semi-precious stones
Of diamonds
Other
II. PRECIOUS METALS AND METALS CLAD WITH PRECIOUS METAL
Silver (including silver plated with gold or platinum), unwrought or in semi-manufactured forms, or in powder form
Powder
Other
Unwrought
Semi-manufactured
Base metals clad with silver, not further worked than semi-manufactured
Gold (including gold plated with platinum), unwrought or in semi-manufactured forms, or in powder form
Non-monetary
Powder
Other unwrought forms
Other semi-manufactured forms
Bars, rods, wire and sections; plates; sheets and strips of a thickness, excluding any backing, exceeding 0,15|mm
Other
Monetary
Base metals or silver, clad with gold, not further worked than semi-manufactured
Platinum, unwrought or in semi-manufactured forms, or in powder form
Platinum
Unwrought or in powder form
Other
Bars, rods, wire and sections; plates; sheets and strips of a thickness, excluding any backing, exceeding 0,15|mm
Other
Palladium
Unwrought or in powder form
Other
Rhodium
Unwrought or in powder form
Other
Iridium, osmium and ruthenium
Unwrought or in powder form
Other
Base metals, silver or gold, clad with platinum, not further worked than semi-manufactured
Waste and scrap of precious metal or of metal clad with precious metal; other waste and scrap containing precious metal or precious-metal compounds, of a kind used principally for the recovery of precious metal
Ash containing precious metal or precious-metal compounds
Other
Of gold, including metal clad with gold but excluding sweepings containing other precious metals
Of platinum, including metal clad with platinum but excluding sweepings containing other precious metals
Other
III. JEWELLERY, GOLDSMITHS' AND SILVERSMITHS' WARES AND OTHER ARTICLES
Articles of jewellery and parts thereof, of precious metal or of metal clad with precious metal
Of precious metal whether or not plated or clad with precious metal
Of silver, whether or not plated or clad with other precious metal
Of other precious metal, whether or not plated or clad with precious metal
Of base metal clad with precious metal
Articles of goldsmiths' or silversmiths' wares and parts thereof, of precious metal or of metal clad with precious metal
Of precious metal whether or not plated or clad with precious metal
Of silver, whether or not plated or clad with other precious metal
Of other precious metal, whether or not plated or clad with precious metal
Of base metal clad with precious metal
Other articles of precious metal or of metal clad with precious metal
Catalysts in the form of wire cloth or grill, of platinum
Other
Articles of natural or cultured pearls, precious or semi-precious stones (natural, synthetic or reconstructed)
Of natural or cultured pearls
Of precious or semi-precious stones (natural, synthetic or reconstructed)
Necklaces, bracelets and other articles made wholly of natural precious or semi-precious stones, simply strung without fasteners or other accessories
Other
Imitation jewellery
Of base metal, whether or not plated with precious metal
Cuff links and studs
Other
Without parts of glass, hand-made
Other
Other
Coin
Coin (other than gold coin), not being legal tender
Other
IRON AND STEEL
I. PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
Pig iron and spiegeleisen in pigs, blocks or other primary forms
Non-alloy pig iron containing by weight 0,5|% or less of phosphorus
Containing by weight not less than 0,4|% of manganese
Containing by weight 1|% or less of silicon
Pig iron ingots with a length of not more than 350|mm, a width of not more than 150|mm, a height of not more than 150|mm
Other
Containing by weight more than 1|% of silicon
Containing by weight not less than 0,1|% but less than 0,4|% of manganese
Pig iron ingots with a length of not more than 350|mm, a width of not more than 150|mm, a height of not more than 150|mm, containing by weight not more than 1|% of silicon
Other
Containing by weight less than 0,1|% of manganese
Non-alloy pig iron containing by weight more than 0,5|% of phosphorus
Alloy pig iron; spiegeleisen
Alloy pig iron containing by weight not less than 0,3|% but not more than 1|% of titanium and not less than 0,5|% but not more than 1|% of vanadium
Other
Ferro-alloys
Ferro-manganese
Containing by weight more than 2|% of carbon
With a granulometry not exceeding 5|mm and a manganese content by weight exceeding 65|%
Other
Other
Ferro-silicon
Containing by weight more than 55|% of silicon
Other
Containing by weight 4|% or more but not more than 10|% of magnesium
Other
Ferro-silico-manganese
Ferro-chromium
Containing by weight more than 4|% of carbon
Containing by weight more than 4|% but not more than 6|% of carbon
Containing by weight more than 6|% of carbon
Other
Containing by weight not more than 0,05|% of carbon
Containing by weight more than 30|% but not more than 90|% of chromium (super-refined ferrochromium)
Other
Containing by weight more than 0,05|% but not more than 0,5|% of carbon
With a chromium content by weight of 30% and more
Containing by weight not more than 0,1|% of carbon and more than 30|% but not more than 90|% of chromium (super-refined ferrochromium)
Other
Other
Containing by weight more than 0,5|% but not more than 4|% of carbon
Containing 1,5% or more but not more than 4% by weight of carbon and not more than 70% of chromium
Other
Ferro-silico-chromium
Ferro-nickel
Ferro-molybdenum
Ferro-tungsten and ferro-silico-tungsten
Other
Ferro-titanium and ferro-silico-titanium
Ferro-vanadium
Ferro-niobium
Other
Ferro-phosphorus
Ferro-silico-magnesium
Other
Ferro-dysprosium, containing by weight: -|78|% or more of dysprosium and -|18|% or more but no more than 22|% of iron
Other
Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99,94|%, in lumps, pellets or similar forms
Ferrous products obtained by direct reduction of iron ore
Other
Ferrous waste and scrap; remelting scrap ingots of iron or steel
Waste and scrap of cast iron
Waste and scrap of alloy steel
Of stainless steel
Containing by weight 8|% or more of nickel
Scrap
Other
Other
Scrap
Other
Other
Scrap
Other
Waste and scrap of tinned iron or steel
Scrap
Other
Other waste and scrap
Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
Turnings, shavings, chips, milling waste, sawdust and filings
Scrap
Other
Trimmings and stampings
In bundles
Scrap
Other
Other
Scrap
Other
Other
Fragmentised (shredded)
Scrap
Other
Other
In bundles
Scrap
Other
Other
Scrap
Other
Remelting scrap ingots
Granules and powders, of pig iron, spiegeleisen, iron or steel
Granules
Powders
Of alloy steel
Other
II. IRON AND NON-ALLOY STEEL
Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading|7203)
Ingots
Other
Semi-finished products of iron or non-alloy steel
Containing by weight less than 0,25|% of carbon
Of rectangular (including square) cross-section, the width measuring less than twice the thickness
Rolled or obtained by continuous casting
Of free-cutting steel
Other
Of a thickness not exceeding 130|mm
Of a thickness exceeding 130|mm
Forged
Other, of rectangular (other than square) cross-section
Rolled or obtained by continuous casting
Forged
Other
Of circular or polygonal cross-section
Rolled or obtained by continuous casting
Forged
Other
Blanks for angles, shapes and sections, rolled or obtained by continuous casting
Other
Containing by weight 0,25|% or more of carbon
Of rectangular (including square) cross-section, the width measuring less than twice the thickness
Rolled or obtained by continuous casting
Of free-cutting steel
Other, containing by weight
0,25|% or more but less than 0,6|% of carbon
0,6|% or more of carbon
Forged
Other, of rectangular (other than square) cross-section
Rolled or obtained by continuous casting
Forged
Of circular or polygonal cross-section
Rolled or obtained by continuous casting
Forged
Other
Blanks for angles, shapes and sections, rolled or obtained by continuous casting
Other
Flat-rolled products of iron or non-alloy steel, of a width of 600|mm or more, hot-rolled, not clad, plated or coated
In coils, not further worked than hot-rolled, with patterns in relief
Other, in coils, not further worked than hot-rolled, pickled
Of a thickness of 4,75|mm or more
Of a thickness of 3|mm or more but less than 4,75|mm
Of a thickness of less than 3|mm
Other, in coils, not further worked than hot-rolled
Of a thickness exceeding 10|mm
Of a thickness of 4,75|mm or more but not exceeding 10|mm
Intended for re-rolling
Other
Of a thickness of 3|mm or more but less than 4,75|mm
Intended for re-rolling
Other
Of a thickness of less than 3|mm
Intended for re-rolling
Other
Not in coils, not further worked than hot-rolled, with patterns in relief
Of a thickness of 2 mm or more
Of a thickness of less than 2 mm
Other, not in coils, not further worked than hot-rolled
Of a thickness exceeding 10|mm
Of a thickness exceeding 15|mm
Of non-alloy steel, excluding silicon-electrical steel, tool steel and high-speed steel
Other
Of a thickness exceeding 10|mm but not exceeding 15|mm, of a width of
2|050|mm or more
Of non-alloy steel, excluding silicon-electrical steel, tool steel and high-speed steel
Other
Less than 2|050|mm
Of non-alloy steel, excluding silicon-electrical steel, tool steel and high-speed steel
Other
Of a thickness of 4,75|mm or more but not exceeding 10|mm
Rolled on four faces or in a closed box pass, of a width not exceeding 1|250|mm
Other, of a width of
2|050|mm or more
Of non-alloy steel, excluding silicon-electrical steel, tool steel and high-speed steel
Other
Less than 2|050|mm
Of a thickness of 3|mm or more but less than 4,75|mm
Rolled on four faces or in a closed box pass, of a width not exceeding 1|250|mm and of a thickness of 4|mm or more
Other
Of a thickness of less than 3|mm
Other
Perforated
Of non-alloy steel, excluding silicon-electrical steel, tool steel and high-speed steel, of a thickness exceeding 10|mm or of a thickness of 4,75|mm or more but not exceeding 10|mm and of a width of 2|050|mm or more
Other
Other
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
Of non-alloy steel, excluding silicon-electrical steel, tool steel and high-speed steel, of a thickness exceeding 10 mm or of a thickness of 4,75 mm or more but not exceeding 10 mm and of a width of 2 050 mm or more
Other
Flat-rolled products of iron or non-alloy steel, of a width of 600|mm or more, cold-rolled (cold-reduced), not clad, plated or coated
In coils, not further worked than cold-rolled (cold-reduced)
Of a thickness of 3|mm or more
'Electrical'
Other
Of a thickness exceeding 1|mm but less than 3|mm
'Electrical'
Other
Of a thickness of 0,5|mm or more but not exceeding 1|mm
'Electrical'
Other
Of a thickness of less than 0,5|mm
'Electrical'
Other
Of a thickness of 0,35|mm or more but less than 0,5|mm
Of a thickness of less than 0,35|mm
Annealed (known as 'black plates')
Other
Not in coils, not further worked than cold-rolled (cold-reduced)
Of a thickness of 3|mm or more
'Electrical'
Other
Of a thickness exceeding 1|mm but less than 3|mm
'Electrical'
Other
Of a thickness of 0,5|mm or more but not exceeding 1|mm
'Electrical'
Other
Of a thickness of less than 0,5|mm
'Electrical'
Other
Other
Perforated
Other
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
Other
Flat-rolled products of iron or non-alloy steel, of a width of 600|mm or more, clad, plated or coated
Plated or coated with tin
Of a thickness of 0,5|mm or more
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
Other
Of a thickness of less than 0,5|mm
Tinplate
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
Other
Other
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
Other
Plated or coated with lead, including terne-plate
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
Other
Electrolytically plated or coated with zinc
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
Other
Otherwise plated or coated with zinc
Corrugated
Other
Plated or coated with chromium oxides or with chromium and chromium oxides
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
Other
Plated or coated with aluminium
Plated or coated with aluminium-zinc alloys
Other
Painted, varnished or coated with plastics
Tinplate, varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
Other
Other
Not further worked than surface-treated or simply cut into shapes other than rectangular (including square)
Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70 % or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
Other
Other
Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70 % or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
Other
Other
Clad
Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)
Other
Tinned and printed
Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)
Other
Other
Silvered, gilded, platinium-plated or enamelled
Other
Not further worked than surface-treated, including cladding, or simply cut into shapes other than rectangular (including square)
Other
Flat-rolled products of iron or non-alloy steel, of a width of less than 600|mm, not clad, plated or coated
Not further worked than hot-rolled
Rolled on four faces or in a closed box pass, of a width exceeding 150|mm and a thickness of not less than 4|mm, not in coils and without patterns in relief
Other, of a thickness of 4,75|mm or more
Of a width exceeding 500 mm
Of a width not exceeding 500 mm
Other
Of a width exceeding 500 mm
Of a width not exceeding 500 mm
Not further worked than cold-rolled (cold-reduced)
Containing by weight less than 0,25|% of carbon
'Electrical'
Of a width exceeding 500 mm
Of a width not exceeding 500 mm
Other
Of a thickness of 0,35|mm or more
Of a width exceeding 500 mm
Of a width not exceeding 500 mm
In coils intended for the manufacture of tinplate
Other
Of a thickness of less than 0,35|mm
Of a width exceeding 500 mm
In coils, annealed (known as 'black plates')
Other
Of a width not exceeding 500 mm
In coils intended for the manufacture of tinplate
Annealed (known as 'black plates')
Other
Other
In coils, annealed (known as 'black plates')
Other
Other
Of a width exceeding 500 mm
'Electrical'
Other
Of a width not exceeding 500 mm
'Electrical'
Other
Other
Perforated
Other
Of a width exceeding|500|mm
Not further worked than surface-treated
Other
Of a width not exceeding|500|mm
Flat-rolled products of iron or non-alloy steel, of a width of less than 600|mm, clad, plated or coated
Plated or coated with tin
Tinplate, not further worked than surface-treated
Other
Of a width exceeding|500|mm
Not further worked than surface-treated
Other
Of a width not exceeding|500|mm
Electrolytically plated or coated with zinc
Of a width exceeding 500 mm
Not further worked than surface-treated
Other
Of a width not exceeding 500 mm
Otherwise plated or coated with zinc
Painted, varnished or coated with plastics
Tinplate, not further worked than varnished; products, plated or coated with chromium oxides or with chromium and chromium oxides, varnished
Tinplate, not further worked than varnished
Other
Of a width exceeding|500|mm
Not further worked than surface-treated
Other
Of a width not exceeding|500|mm
Other
Of a width exceeding 500 mm
Not further worked than surface-treated
Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70 % or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
Other
Other
Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
Other
Of a width not exceeding 500 mm
Of non-alloy steel, painted, varnished or coated with plastics on at least one side, excluding so-called 'sandwich panels' of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, and excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc)
Other
Otherwise plated or coated
Plated or coated with chromium oxides or with chromium and chromium oxides
Of a width exceeding|500|mm
Not further worked than surface-treated
Other
Of a width not exceeding|500|mm
Plated or coated with chromium or nickel
Of a width exceeding|500|mm
Not further worked than surface-treated
Other
Of a width not exceeding|500|mm
Plated or coated with copper
Of a width exceeding|500|mm
Not further worked than surface-treated
Other
Of a width not exceeding|500|mm
Plated or coated with aluminium
Plated or coated with aluminium-zinc alloys
Other
Other
Of a width exceeding|500|mm
Silvered, gilded, platinum-plated or enamelled
Other
Not further worked than surface-treated
Other
Of a width not exceeding|500|mm
Clad
Of a width exceeding|500|mm
Not further worked than surface-treated
Other
Of a width not exceeding|500|mm
Not further worked than surface-treated
Hot-rolled, not further worked than clad
Other
Other
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel
Containing indentations, ribs, grooves or other deformations produced during the rolling process
Other, of free-cutting steel
Other
Of circular cross-section measuring less than 14|mm in diameter
Of a type used for concrete reinforcement
Of a type used for tyre cord
Other
Containing by weight 0,06|% or less of carbon
Containing by weight more than 0,06|% but less than 0,25|% of carbon
Containing by weight 0,25|% or more but not more than 0,75|% of carbon
Containing by weight more than 0,75|% of carbon
Other
Containing by weight less than 0,25|% of carbon
Containing by weight 0,25|% or more of carbon
Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
Forged
Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
High fatigue performance concrete reinforcing bars and rods
Other
Other, of free-cutting steel
Other
Of rectangular (other than square) cross-section
Containing by weight less than 0,25|% of carbon
Containing by weight 0,25|% or more of carbon
Other
Containing by weight less than 0,25|% of carbon
Of a type used for concrete reinforcement
Other, of circular cross-section measuring in diameter
80|mm or more
Less than 80|mm
Other
Containing by weight 0,25|% or more of carbon
Of a circular cross-section measuring in diameter
80|mm or more
Less than 80|mm
Other
Other bars and rods of iron or non-alloy steel
Of free-cutting steel, not further worked than cold-formed or cold-finished
Other, not further worked than cold-formed or cold-finished
Containing by weight less than 0,25|% of carbon
Of rectangular (other than square) cross-section
Other
Containing by weight 0,25|% or more of carbon
Other
Hot-rolled, hot-drawn or extruded, not further worked than clad
Other
Angles, shapes and sections of iron or non-alloy steel
U, I or H|sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80|mm
L or T|sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80|mm
L|sections
T|sections
U, I or H|sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80|mm or more
U|sections
Of a height of 80|mm or more but not exceeding 220|mm
Of a height exceeding 220|mm
I|sections
Of a height of 80|mm or more but not exceeding 220|mm
With parallel flange faces
Other
Of a height exceeding 220|mm
With parallel flange faces
Other
H|sections
Of a height of 80|mm or more but not exceeding 180|mm
Of a height exceeding 180|mm
L or T|sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80|mm or more
L|sections
T|sections
Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded
With a cross-section which is capable of being enclosed in a square the side of which is 80|mm
Other
Bulb flats
Other
Angles, shapes and sections, not further worked than cold-formed or cold-finished
Obtained from flat-rolled products
C, L, U, Z, omega or open-ended sections
Other
Other
Other
Cold-formed or cold-finished from flat-rolled products
Profiled (ribbed) sheets
Other
Other
Hot-rolled, hot-drawn or extruded, not further worked than clad
Other
Wire of iron or non-alloy steel
Not plated or coated, whether or not polished
Containing by weight less than 0,25|% of carbon
With a maximum cross-sectional dimension of less than 0,8|mm
With a maximum cross-sectional dimension of 0,8|mm or more
Containing indentations, ribs, grooves or other deformations produced during the rolling process
Other
Containing by weight 0,25|% or more but less than 0,6|% of carbon
Containing by weight 0,6|% or more of carbon
Of non-alloy steel, with a maximum cross-sectional dimension exceeding 3|mm
Other
Plated or coated with zinc
Containing by weight less than 0,25|% of carbon
With a maximum cross-sectional dimension of less than 0,8|mm
With a maximum cross-sectional dimension of 0,8|mm or more
Containing by weight 0,25|% or more but less than 0,6|% of carbon
Containing by weight 0,6|% or more of carbon
Of non-alloy steel, with a maximum cross-sectional dimension exceeding 3|mm
Other
Plated or coated with other base metals
Containing by weight less than 0,25|% of carbon
Copper-coated
Other
Containing by weight 0,25|% or more but less than 0,6|% of carbon
Containing by weight 0,6|% or more of carbon
Other
Containing by weight less than 0,25|% of carbon
Containing by weight 0,25|% or more but less than 0,6|% of carbon
Containing by weight 0,6|% or more of carbon
III. STAINLESS STEEL
Stainless steel in ingots or other primary forms; semi-finished products of stainless steel
Ingots and other primary forms
Other
Of rectangular (other than square) cross-section
Containing by weight 2,5|% or more of nickel
Containing by weight less than 2,5|% of nickel
Other
Of square cross-section
Rolled or obtained by continous casting
Forged
Other
Rolled or obtained by continuous casting
Forged
Flat-rolled products of stainless steel, of a width of 600|mm or more
Not further worked than hot-rolled, in coils
Of a thickness exceeding 10|mm
Of a thickness of 4,75|mm or more but not exceeding 10|mm
Containing by weight 2,5|% or more of nickel
Containing by weight less than 2,5|% of nickel
Of a thickness of 3|mm or more but less than 4,75|mm
Containing by weight 2,5|% or more of nickel
Containing by weight less than 2,5|% of nickel
Of a thickness of less than 3|mm
Containing by weight 2,5|% or more of nickel
Containing by weight less than 2,5|% of nickel
Not further worked than hot-rolled, not in coils
Of a thickness exceeding 10|mm
Containing by weight 2,5|% or more of nickel
Containing by weight less than 2,5|% of nickel
Of a thickness of 4,75|mm or more but not exceeding 10|mm
Containing by weight 2,5|% or more of nickel
Containing by weight less than 2,5|% of nickel
Of a thickness of 3|mm or more but less than 4,75|mm
Of a thickness of less than 3|mm
Not further worked than cold-rolled (cold-reduced)
Of a thickness of 4,75|mm or more
Of a thickness of 3|mm or more but less than 4,75|mm
Containing by weight 2,5|% or more of nickel
Containing by weight less than 2,5|% of nickel
Of a thickness exceeding 1|mm but less than 3|mm
Containing by weight 2,5|% or more of nickel
Containing by weight less than 2,5|% of nickel
Of a thickness of 0,5|mm or more but not exceeding 1|mm
Containing by weight 2,5|% or more of nickel
Containing by weight less than 2,5|% of nickel
Of a thickness of less than 0,5|mm
Containing by weight 2,5|% or more of nickel
Containing by weight less than 2,5|% of nickel
Other
Perforated
Other
Flat-rolled products of stainless steel, of a width of less than 600|mm
Not further worked than hot-rolled
Of a thickness of 4,75|mm or more
Of a thickness of less than 4,75|mm
Not further worked than cold-rolled (cold-reduced)
Of a thickness of 3|mm or more, containing by weight
2,5|% or more of nickel
Less than 2,5|% of nickel
Of a thickness exceeding 0,35|mm but of less than 3|mm, containing by weight
2,5|% or more of nickel
Less than 2,5|% of nickel
Of a thickness not exceeding 0,35|mm, containing by weight
2,5|% or more of nickel
Less than 2,5|% of nickel
Other
Perforated
Other
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel
Containing by weight 2,5|% or more of nickel
Containing by weight less than 2,5|% of nickel
Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
Bars and rods, not further worked than hot-rolled, hot-drawn or extruded
Of circular cross-section
Of a diameter of 80|mm or more, containing by weight
2,5|% or more of nickel
Less than 2,5|% of nickel
Of a diameter of less than 80|mm, containing by weight
2,5|% or more of nickel
Less than 2,5|% of nickel
Other
Containing by weight 2,5|% or more of nickel
Containing by weight less than 2,5|% of nickel
Bars and rods, not further worked than cold-formed or cold-finished
Of circular cross-section
Of a diameter of 80|mm or more, containing by weight
2,5|% or more of nickel
Less than 2,5|% of nickel
Of a diameter of 25|mm or more, but less than 80|mm, containing by weight
2,5|% or more of nickel
Less than 2,5|% of nickel
Of a diameter of less than 25|mm, containing by weight
2,5|% or more of nickel
Less than 2,5|% of nickel
Other, containing by weight
2,5|% or more of nickel
Less than 2,5|% of nickel
Other bars and rods
Forged, containing by weight
2,5|% or more of nickel
Less than 2,5|% of nickel
Other
Hot-rolled, hot-drawn or extruded, not further worked than clad
Other
Angles, shapes and sections
Not further worked than hot-rolled, hot-drawn or extruded
Not further worked than cold-formed or cold-finished
Other
Hot-rolled, hot-drawn or extruded, not further worked than clad
Other
Wire of stainless steel
Containing by weight 2,5|% or more of nickel
Containing by weight 28|% or more but not more than 31|% of nickel and 20|% or more but not more than 22|% of chromium
Other
Containing by weight less than 2,5|% of nickel
Containing by weight 13|% or more but not more than 25|% of chromium and 3,5|% or more but not more than 6|% of aluminium
Other
IV. OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON-ALLOY STEEL
Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel
Ingots and other primary forms
Of tool steel
Other
Other
Of tool steel
Of rectangular (including square) cross-section
Other
Hot-rolled or obtained by continuous casting
Other
Other
Of rectangular (including square) cross-section
Hot-rolled or obtained by continuous casting
The width measuring less than twice the thickness
Of high-speed steel
Containing by weight not more than 0,7|% of carbon, 0,5|% or more but not more than 1,2|% of manganese and 0,6|% or more but not more than 2,3|% of silicon; containing by weight 0,0008|% or more of boron with any other element less than the minimum content referred to in note|1(f) to this chapter
Other
Other
Forged
Other
Hot-rolled or obtained by continuous casting
Containing by weight not less than 0,9|% but not more than 1,15|% of carbon, not less than 0,5|% but not more than 2|% of chromium and, if present, not more than 0,5|% of molybdenum
Other
Forged
Flat-rolled products of other alloy steel, of a width of 600|mm or more
Of silicon-electrical steel
Grain-oriented
Of a thickness exceeding 0,16|mm
With a maximum core loss not higher than 0.9 W/kg
With a maximum core loss higher than 0.9 W/kg but not higher than 1,05 W/kg
With a maximum core loss higher than 1,05 W/kg
Other
Other
Hot-rolled
Products clad, plated or coated, not in coils, without patterns in relief, of a thickness exceeding 10|mm and products clad, plated or coated, not in coils, without patterns in relief, of a thickness of 4,75|mm or more but not exceeding 10 mm and of a width of 2|050|mm or more
Other
Cold-rolled
Other, not further worked than hot-rolled, in coils
Of tool steel
Of high-speed steel
Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
Other
Other
Other, not further worked than hot-rolled, not in coils
Of tool steel
Of a thickness of 4,75|mm or more
Of a thickness less than 4,75 mm
Of high-speed steel
Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
Other
Other
Of a thickness exceeding 10|mm
Of a thickness of 4,75|mm or more but not exceeding 10|mm
Of a width of 2|050|mm or more
Other
Of a thickness of less than 4,75|mm
Other, not further worked than cold-rolled (cold-reduced)
Of high-speed steel
Not further worked than rolled; not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
Other
Other
Other
Electrolytically plated or coated with zinc
Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
Other
Otherwise plated or coated with zinc
Other
Not further worked than surface-treated, including cladding or simply cut into shapes other than rectangular (including square)
Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
Other
Other, of a thickness exceeding 10|mm or of a thickness of 4,75|mm or more but not exceeding 10|mm and of a width of 2|050|mm or more
Other
Painted, varnished or coated with plastics on at least one side, excluding so-called "sandwich panels" of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
Other
Flat-rolled products of other alloy steel, of a width of less than 600|mm
Of silicon-electrical steel
Grain-oriented
Of a width exceeding 500 mm
Of a thickness exceeding 0,16|mm
With a maximum core loss not higher than 0.9 W/kg
With a maximum core loss higher than 0.9 W/kg but not higher than 1,05 W/kg
With a maximum core loss higher than 1,05 W/kg
Other
Of a width not exceeding 500 mm
Of a thickness exceeding 0,16|mm
With a maximum core loss not higher than 0.9 W/kg
With a maximum core loss higher than 0.9 W/kg but not higher than 1,05 W/kg
With a maximum core loss higher than 1,05 W/kg
Other
Other
Not further worked than hot-rolled
Products clad, plated or coated
Other
Other
Of a width exceeding 500 mm
Of a width not exceeding 500 mm
Of high-speed steel
Not further worked than hot-rolled; of a width not exceeding 500|mm, hot-rolled, not further worked than clad; of a width exceeding 500|mm, not further worked than cold-rolled (cold-reduced) or not further worked than surface-treated, including cladding
Other
Other
Not further worked than hot-rolled
Of tool steel
Other
Of a thickness of 4,75|mm or more
Of a thickness of less than 4,75|mm
Not further worked than cold-rolled (cold-reduced)
Of a width exceeding|500|mm
Of a width not exceeding 500 mm
Other
Electrolytically plated or coated with zinc
Otherwise plated or coated with zinc
Other
Of a width not exceeding 500 mm, hot-rolled, not further worked than clad; of a width exceeding 500 mm, not further worked than surface-treated, including cladding
Painted, varnished or coated with plastics on at least one side, excluding products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
Other
Other
Painted, varnished or coated with plastics on at least one side, excluding so-called "sandwich panels" of a kind used for building applications and consisting of two outer metal sheets with a stabilising core of insulation material sandwiched between them, excluding those products with a final coating of zinc-dust (a zinc-rich paint, containing by weight 70% or more of zinc) and excluding products with a substrate with a metallic coating of chromium or tin
Other
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel
Of high-speed steel
Of silico-manganese steel
Other
Containing by weight 0,0008|% or more of boron with any other element less than the minimum content referred to in note|1(f) to this chapter
Containing by weight 0,9|% or more but not more than 1,15|% of carbon, 0,5|% or more but not more than 2|% of chromium and, if present, not more than 0,5|% of molybdenum
Other
Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel
Bars and rods, of high-speed steel
Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
Forged
Other
Bars and rods, of silico-manganese steel
Of rectangular (other than square) cross-section, hot-rolled on four faces
Not further worked than hot-rolled, hot-drawn or extruded
Other
Hot-rolled, hot-drawn or extruded, not further worked than clad
Other
Other
Not further worked than hot-rolled, hot-drawn or extruded; hot-rolled, hot-drawn or extruded, not further worked than clad
Other
Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded
Of tool steel
High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
Other
Containing by weight 0,9|% or more but not more than 1,15|% of carbon, 0,5|% or more but not more than 2|% of chromium and, if present, not more than 0,5|% of molybdenum
Of circular cross-section of a diameter of 80|mm or more
High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
Other
Other
High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
Other
Other
Of circular cross-section, of a diameter of
80|mm or more
High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
Other
Less than 80|mm
High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
Other
Of rectangular (other than square) cross-section, hot-rolled on four faces
High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
Other
Other
High fatigue performance concrete reinforcing bars and rods, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
Other
Other bars and rods, not further worked than forged
Of tool steel
Other
Other bars and rods, not further worked than cold-formed or cold-finished
Of tool steel
Containing by weight 0,9|% or more but not more than 1,15|% of carbon, 0,5|% or more but not more than 2|% of chromium and, if present, not more than 0,5|% of molybdenum
Other
Of circular cross-section, of a diameter of
80|mm or more
Less than 80|mm
Other
Other bars and rods
Of tool steel
Hot-rolled, hot-drawn or extruded, not further worked than clad
Other
Other
Hot-rolled, hot-drawn or extruded, not further worked than clad
Other
Angles, shapes and sections
Not further worked than hot-rolled, hot-drawn or extruded
Other
Hot-rolled, hot-drawn or extruded, not further worked than clad
Other
Hollow drill bars and rods
Wire of other alloy steel
Of silico-manganese steel
Other
Of high-speed steel
Containing by weight 0,9|% or more but not more than 1,15|% of carbon, 0,5|% or more but not more than 2|% of chromium and, if present, not more than 0,5|% of molybdenum
Other
ARTICLES OF IRON OR STEEL
Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel
Sheet piling
Angles, shapes and sections
Railway or tramway track construction material of iron or steel, the following: rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing rails
Rails
Current-conducting, with parts of non-ferrous metal
Other
New
Vignole rails
Of a weight per metre of 36|kg or more
Of a weight per metre of less than 36|kg
Grooved rails
Other
Used
Switch blades, crossing frogs, point rods and other crossing pieces
Fish-plates and sole plates
Other
Tubes, pipes and hollow profiles, of cast iron
Tubes and pipes of a kind used in pressure systems
Of ductile cast iron (also known as spheroidal graphite cast iron), with the exclusion of tubes and pipes of ductile cast iron without internal and external coating (‘bare pipes’)
Tubes and pipes of ductile cast iron without internal and external coating (‘bare pipes’)
Other
Other
Tubes and pipes of ductile cast iron (also known as spheroidal graphite cast iron), with the exclusion of tubes and pipes of ductile cast iron without internal and external coating (‘bare pipes’)
Tubes and pipes of ductile cast iron without internal and external coating (‘bare pipes’)
Other
Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel
Line pipe of a kind used for oil or gas pipelines
Of stainless steel
Of circular cross-section, of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Other
Of an external diameter not exceeding 168,3|mm
Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Of an external diameter exceeding 168,3|mm but not exceeding 406,4|mm
Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Of an external diameter exceeding 406,4|mm
Casing, tubing and drill pipe, of a kind used in drilling for oil or gas
Drill pipe of stainless steel
Of circular cross-section, of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Other drill pipe
Of circular cross-section, of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Other, of stainless steel
Of circular cross-section, of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Other
Of an external diameter not exceeding 168,3|mm
Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Of an external diameter exceeding 168,3|mm but not exceeding 406,4|mm
Of circular cross-section and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Of an external diameter exceeding 406,4|mm
Casings
Other
Other, of circular cross-section, of iron or non-alloy steel
Cold-drawn or cold-rolled (cold-reduced)
Precision tubes
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Other
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Other
Unworked, straight and of uniform wall thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall thicknesses
Of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Other
Threaded or threadable tubes (gas pipe)
Plated or coated with zinc
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Other
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Other, of an external diameter
Not exceeding 168,3|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Exceeding 168,3|mm but not exceeding 406,4|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Exceeding 406,4|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other, of circular cross-section, of stainless steel
Cold-drawn or cold-rolled (cold-reduced)
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other
Unworked, straight and of uniform wall thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall thicknesses
Other
Of an external diameter not exceeding 168,3|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Of an external diameter exceeding 168,3|mm but not exceeding 406,4|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Of an external diameter exceeding 406,4|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other, of circular cross-section, of other alloy steel
Cold-drawn or cold-rolled (cold-reduced)
Straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9|% but not more than 1,15|% of carbon, not less than 0,5|% but not more than 2|% of chromium and, if present, not more than 0,5|% of molybdenum, of a length
Not exceeding 0,5|m
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Exceeding 0,5|m
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other
Precision tubes
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Other
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Other
Unworked, straight and of uniform wall thickness, for use solely in the manufacture of tubes and pipes with other cross-sections and wall-thicknesses
Of an external diameter not exceeding 406,4|mm and with a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Other, straight and of uniform wall thickness, of alloy steel containing by weight not less than 0,9|% but not more than 1,15|% of carbon, not less than 0,5|% but not more than 2|% of chromium and, if present, not more than 0,5|% of molybdenum, of a length
Not exceeding 0,5|m
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Exceeding 0,5|m
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other
Of an external diameter not exceeding 168,3|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Of an external diameter exceeding 168,3|mm but not exceeding 406,4|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
With a Carbon Equivalent Value (CEV) not exceeding 0,86 according to the International Institute of Welding (IIW) formula and chemical analysis
Other
Of an external diameter exceeding 406,4|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Tubes and pipes, of stainless steel
Other
Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406,4|mm, of iron or steel
Line pipe of a kind used for oil or gas pipelines
Longitudinally submerged arc welded
Other, longitudinally welded
Other
Casing of a kind used in drilling for oil or gas
Other, welded
Longitudinally welded
Other
Other
Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel
Line pipe of a kind used for oil or gas pipelines
Welded, of stainless steel
Longitudinally welded
Spirally welded
Other
Longitudinally welded
Spirally welded
Casing and tubing of a kind used in drilling for oil or gas
Welded, of stainless steel
Other
Other, welded, of circular cross-section, of iron or non-alloy steel
Precision tubes, with a wall thickness
Not exceeding 2|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Exceeding 2|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other
Threaded or threadable tubes (gas pipe)
Plated or coated with zinc
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Tubes and pipes of an external diameter not exceeding 168,3 mm
Other
Other
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Tubes and pipes of an external diameter not exceeding 168,3 mm
Other
Other, of an external diameter
Not exceeding 168,3|mm
Plated or coated with zinc
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Tubes and pipes, ready for fitting, usable as hydraulic conduits for fuel-oil or lubricants in certain types of aircraft
Other
Tubes and pipes
Other
Other
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Tubes and pipes, ready for fitting, usable as hydraulic conduits for fuel-oil or lubricants in certain types of aircraft
Other
Tubes and pipes
Other
Exceeding 168,3|mm but not exceeding 406,4|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other, welded, of circular cross-section, of stainless steel
Cold-drawn or cold-rolled (cold-reduced)
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other, welded, of circular cross-section, of other alloy steel
Precision tubes
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other, welded, of non-circular cross-section
Of square or rectangular cross-section
Of stainless steel
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other
With a wall thickness not exceeding 2|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
With a wall thickness exceeding 2|mm
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Of other non-circular cross-section
Of stainless steel
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other
Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel
Cast fittings
Of non-malleable cast iron
Of a kind used in pressure systems
Other
Other
Of malleable cast iron
Threaded, excluding bodies of compression fittings using ISO DIN 13 metric thread and circular junction boxes without having a lid
Other
Other
Other, of stainless steel
Flanges
For use in certain types of aircraft
Other
Threaded elbows, bends and sleeves
Sleeves
For use in certain types of aircraft
Other
Elbows and bends
For use in certain types of aircraft
Other
Butt welding fittings
Elbows and bends
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Other
Threaded
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Other
Flanges
For use in certain types of aircraft
Other
Threaded elbows, bends and sleeves
Sleeves
For use in certain types of aircraft
Other
Elbows and bends
For use in certain types of aircraft
Other
Butt welding fittings
With greatest external diameter not exceeding 609,6|mm
Elbows and bends
For use in certain types of aircraft
Consigned from Taiwan, Indonesia, Sri Lanka or the Philippines
Other
Other
Consigned from Taiwan
Consigned from Indonesia
Consigned from Sri Lanka
Consigned from the Philippines
Other
Other
For use in certain types of aircraft
Consigned from Taiwan, Indonesia, Sri Lanka or the Philippines
Other
Other
Consigned from Taiwan
Consigned from Indonesia
Consigned from Sri Lanka
Consigned from the Philippines
Other
With greatest external diameter exceeding 609,6|mm
Elbows and bends
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Other
Threaded
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
With greatest external diameter not exceeding|609,6|mm
Consigned from Taiwan, Indonesia, Sri Lanka or the Philippines
Other
Other
Other
With greatest external diameter not exceeding|609,6|mm
Consigned from Taiwan
Consigned from Indonesia
Consigned from Sri Lanka
Consigned from the Philippines
Other
Other
Structures (excluding prefabricated buildings of heading|9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel
Bridges and bridge-sections
Towers and lattice masts
Doors, windows and their frames and thresholds for doors
Equipment for scaffolding, shuttering, propping or pit-propping
Other
Solely or principally of sheet
Panels comprising two walls of profiled (ribbed) sheet with an insulating core
Other
Other
Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300|l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
For gases (other than compressed or liquefied gas)
For liquids
Lined or heat-insulated
Other, of a capacity
Exceeding 100|000|l
Not exceeding 100|000|l
For solids
Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300|l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
Of a capacity of 50|l or more
Of a capacity of less than 50|l
Cans which are to be closed by soldering or crimping
Cans of a kind used for preserving food
Cans of a kind used for preserving drink
Other, with a wall thickness of
Less than 0,5|mm
0,5|mm or more
Other
With a wall thickness of less than 0,5|mm
With a wall thickness of 0,5|mm or more
Containers for compressed or liquefied gas, of iron or steel
Seamless
For a pressure of 165|bar or more, of a capacity of
Less than 20|l
Containers intended for pressurisation, of iron or steel, in certain types of aircraft
Other
20|l or more but not more than 50|l
Containers intended for pressurisation, of iron or steel, in certain types of aircraft
Other
More than 50|l
Containers intended for pressurisation, of iron or steel, in certain types of aircraft
Other
Other
Containers intended for pressurisation, of iron or steel, in certain types of aircraft
Other
Other, of a capacity of
Less than 1|000|l
1|000|l or more
Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated
Stranded wire, ropes and cables
Of stainless steel
With fittings attached, or made up into articles, for use in civil aircraft
Other
Other, with a maximum cross-sectional dimension
Not exceeding 3|mm
Plated or coated with copper-zinc alloys (brass)
With fittings attached, or made up into articles, for use in civil aircraft
Other
Other
With fittings attached, or made up into articles, for use in civil aircraft
Other
Exceeding 3|mm
Stranded wire
Not coated
With fittings attached, or made up into articles, for use in civil aircraft
With not more than 18 wires, of non-alloy steel, containing by weight 0,6|% or more of carbon
Other
Other
With not more than 18 wires, of non-alloy steel, containing by weight 0,6|% or more of carbon
Other
Coated
Plated or coated with zinc
With fittings attached, or made up into articles, for use in civil aircraft
With not more than 18 wires, of non-alloy steel, containing by weight 0,6% or more of carbon, excluding galvanised (but not with any further coating material) seven wire strands in which the diameter of the central wire is identical or less than 3% greater than the diameter of any of the 6 other wires
Other
Other
With not more than 18 wires, of non-alloy steel, containing by weight 0,6% or more of carbon, excluding galvanised (but not with any further coating material) seven wire strands in which the diameter of the central wire is identical or less than 3% greater than the diameter of any of the 6 other wires
Other
Other
With fittings attached, or made up into articles, for use in civil aircraft
With not more than 18 wires, of non-alloy steel, containing by weight 0,6|% or more of carbon
Other
Other
With not more than 18 wires, of non-alloy steel, containing by weight 0,6|% or more of carbon
Other
Ropes and cables (including locked coil ropes)
Not coated or only plated or coated with zinc, with a maximum cross-sectional dimension
Exceeding 3|mm but not exceeding 12|mm
With fittings attached, or made up into articles, for use in civil aircraft
Of steel
Consigned from Moldova or Morocco
Consigned from the Republic of Korea
Other
Other
Other
Of steel
Consigned from Moldova
Consigned from Morocco
Consigned from the Republic of Korea
Other
Other
Exceeding 12|mm but not exceeding 24|mm
With fittings attached, or made up into articles, for use in civil aircraft
Of steel
Consigned from Moldova or Morocco
Consigned from the Republic of Korea
Other
Other
Other
Of steel
Consigned from Moldova
Consigned from Morocco
Consigned from the Republic of Korea
Other
Other
Exceeding 24|mm but not exceeding 48|mm
With fittings attached, or made up into articles, for use in civil aircraft
Of steel
Consigned from Moldova or Morocco
Consigned from the Republic of Korea
Other
Other
Other
Of steel
Consigned from Moldova
Consigned from Morocco
Consigned from the Republic of Korea
Other
Other
Exceeding 48|mm
With fittings attached, or made up into articles, for use in civil aircraft
Of steel
Consigned from Moldova or Morocco
Consigned from the Republic of Korea
Other
Other
Other
Of steel
Consigned from Moldova
Consigned from Morocco
Consigned from the Republic of Korea
Other
Other
Other
With fittings attached, or made up into articles, for use in civil aircraft
Of steel
Consigned from Moldova or Morocco
Consigned from the Republic of Korea
Other
Other
Other
Of steel
Consigned from Moldova
Consigned from Morocco
Consigned from the Republic of Korea
Other
Other
Other
With fittings attached, or made up into articles for use in civil aircraft
Other
Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel
Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel
Woven cloth
Endless bands for machinery, of stainless steel
Other woven cloth, of stainless steel
Other
Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3|mm or more and having a mesh size of 100|cm$2|or more
Of ribbed wire
Other
Other grill, netting and fencing, welded at the intersection
Plated or coated with zinc
Other
Other cloth, grill, netting and fencing
Plated or coated with zinc
Coated with plastics
Other
Expanded metal
Chain and parts thereof, of iron or steel
Articulated link chain and parts thereof
Roller chain
Of a kind used for cycles and motorcycles
Other
Other chain
Parts
Skid chain
Other chain
Stud-link
Other, welded link
Other
Other parts
Anchors, grapnels and parts thereof, of iron or steel
Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading|8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper
Cold-pressed from wire
Nails in strips or coils
Other
Other
Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel
Threaded articles
Coach screws
Other wood screws
Of stainless steel
For use in certain types of aircraft
Consigned from the Philippines
Other
Other
Consigned from the Philippines
Other
Other
For use in certain types of aircraft
Other
Screw hooks and screw rings
For use in certain types of aircraft
Other
Self-tapping screws
Of stainless steel
Bi-metal self-drilling screws, having a shank and head of stainless steel and a point and leading threads of carbon steel, which are welded together allowing the screw to self-drill its own pilot hole and cut its own thread into hard steel metal; bi-metal self-tapping screws, having a shank and head of stainless steel and leading threads of carbon steel which are welded together, allowing the screw to cut its own thread into hard steel metal
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Consigned from the Philippines
Other
Other
Consigned from the Philippines
Other
Other
Spaced-thread screws
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Rock bolt: -|being a self-tapping screw, -|with a length of more than 300|mm,of a kind used for support of mines
Other
Other screws and bolts, whether or not with their nuts or washers
Turned from bars, rods, profiles, or wire, of solid section, of a shank thickness not exceeding 6|mm
Self-locking bolts and nuts (of the type "Hi-Lok")
Other
For use in certain types of aircraft
Other
Other
For fixing railway track construction material
Other
Without heads
Of stainless steel
Self-locking bolts and nuts (of the type "Hi-Lok")
Consigned from the Philippines
Other
Other
For use in certain types of aircraft
Consigned from the Philippines
Other
Other
Consigned from the Philippines
Other
Other, with a tensile strength
Of less than 800|MPa
Self-locking bolts and nuts (of the type "Hi-lok")
Other
For use in certain types of aircraft
Other
Of 800|MPa or more
Self-locking bolts and nuts (of the type "Hi-Lok")
Other
For use in certain types of aircraft
Other
With heads
Slotted or cross-recessed heads
Of stainless steel
Self-locking bolts and nuts (of the type "Hi-Lok")
Consigned from the Philippines
Other
Other
For use in certain types of aircraft
Consigned from the Philippines
Other
Other
Consigned from the Philippines
Other
Other
Self-locking bolts and nuts (of the type "Hi-Lok")
Other
For use in certain types of aircraft
Other
Hexagonal-socket heads
Of stainless steel
Self-locking bolts and nuts (of the type "Hi-Lok")
Consigned from the Philippines
Other
Other
For use in certain types of aircraft
Consigned from the Philippines
Other
Other
Consigned from the Philippines
Other
Other
Self-locking bolts and nuts (of the type "Hi-Lok")
Other
For use in certain types of aircraft
Other
Hexagonal heads
Of stainless steel
Self-locking bolts and nuts (of the type "Hi-Lok")
Consigned from the Philippines
Other
Other
For use in certain types of aircraft
Consigned from the Philippines
Other
Other
Consigned from the Philippines
Other
Other, with a tensile strength
Of less than 800|MPa
Self-locking bolts and nuts (of the type "Hi-Lok")
Other
For use in certain types of aircraft
Other
Of 800|MPa or more
Self-locking bolts and nuts (of the type "Hi-Lok")
Other
For use in certain types of aircraft
Other
Other
Self-locking bolts and nuts (of the type "Hi-Lok")
Of stainless steel
Other
Other
For use in certain types of aircraft
Of stainless steel
Other
Other
Of stainless steel
Other
Nuts
Turned from bars, rods, profiles, or wire, of solid section, of a hole diameter not exceeding 6|mm
Self-locking nuts (of the type 'Hi-Lok')
Other
For use in certain types of aircraft
Other
Other
Of stainless steel
Self-locking nuts (of the type 'Hi-Lok')
Other
For use in certain types of aircraft
Other
Other
Self-locking nuts
Separately consigned, of a hole diameter not exceeding|10|mm
Of the type 'Hi-Lok'
Other
For use in certain types of aircraft
Other
Other
Of the type 'Hi-Lok'
Other
For use in certain types of aircraft
Other
Other, with an inside diameter
Not exceeding 12|mm
Separately consigned, of a hole diameter not exceeding|10|mm
Of the type 'Hi-Lok'
Other
For use in certain types of aircraft
Other
Other
Of the type 'Hi-Lok'
Other
For use in certain types of aircraft
Other
Exceeding 12|mm
Of the type 'Hi-Lok'
Other
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Non-threaded articles
Spring washers and other lock washers
For use in certain types of aircraft
Of stainless steel
Other
Other
Of stainless steel
Other
Other washers
For use in certain types of aircraft
Of stainless steel
Other
Other
Of stainless steel
Other
Rivets
For use in certain types of aircraft
Other
Cotters and cotter pins
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins of iron or steel, not elsewhere specified or included
Safety pins and other pins
Other
Sewing, darning or embroidery needles
Other
Springs and leaves for springs, of iron or steel
Leaf-springs and leaves therefor
Hot-worked
Laminated springs and leaves therefor
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Helical springs
Hot-worked
For use in certain types of aircraft
Other
Other
Coil compression springs
For use in certain types of aircraft
Other
Coil tension springs
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Other
Flat spiral springs
For use in certain types of aircraft
Other
Flat spiral spring of tempered steel, with: -|a thickness of 2,67|mm or more, but not more than 4,11|mm, -|a width of 12,57|mm or more, but not more than 16,01|mm, -|a torque of 18,05|Nm or more, but not more than 73,5|Nm -|an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218° for use in the manufacture of tensioners for power transmission belts, for internal combustion engines
Other
Discs springs
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel
Cooking appliances and plate warmers
For gas fuel or for both gas and other fuels
With oven, including separate ovens
Other
For liquid fuel
Other, including appliances for solid fuel
Other appliances
For gas fuel or for both gas and other fuels
For liquid fuel
Other, including appliances for solid fuel
Parts
Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot-air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel
Radiators and parts thereof
Of cast iron
Other
Other
Air heaters and not-air distributors (excluding parts thereof), for use in civil aircraft
Other
Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel
Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like
Other
Of cast iron, not enamelled
Of cast iron, enamelled
Of stainless steel
Ironing boards, including sleeve boards, whether or not free standing, and legs, tops and iron rests thereof
Other
Of iron (other than cast iron) or steel, enamelled
Other
Ironing boards, including sleeve boards, whether or not free standing, and legs, tops and iron rests thereof
Other
Sanitary ware and parts thereof, of iron or steel
Sinks and washbasins, of stainless steel
For use in civil aircraft
Other
Baths
Of cast iron, whether or not enamelled
Other
Other, including parts
Sanitary ware (excluding parts thereof), for use in civil aircraft
Other
Other cast articles of iron or steel
Of non-malleable cast iron
Other
Grinding balls and similar articles for mills
Other
Of malleable cast iron
Anchor head of hot dipped galvanized ductile cast iron of the kind used in the production of earth anchors
Other
Other
Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft
Devices for cargo stowage and clamping freight, for use in certain types of aircraft
Balls used in freight loading systems in certain types of aircraft
Other
Other articles of iron or steel
Forged or stamped, but not further worked
Grinding balls and similar articles for mills
Other
Open-die forged
Other
Articles of iron or steel wire
For use in civil aircraft
Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001|mm or more but not more than 0,070|mm, compacted by sintering and rolling
Other
Other
Ladders and steps
Pallets and similar platforms for handling goods
Reels for cables, piping and the like
Non-mechanical ventilators, guttering, hooks and like articles used in the building industry
Other articles of iron or steel
Open-die forged
Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft
Devices for cargo stowage and clamping freight, for use in certain types of aircraft
Balls used in freight loading systems in certain types of aircraft
Other
Closed-die forged
Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft
Devices for cargo stowage and clamping freight, for use in certain types of aircraft
Balls used in freight loading systems in certain types of aircraft
Other
Sintered
Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft
Devices for cargo stowage and clamping freight, for use in certain types of aircraft
Ball bearings used in freight loading systems in certain types of aircraft
Other
Other
Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft
Devices for cargo stowage and clamping freight, for use in certain types of aircraft
Ball bearings used in freight loading systems in certain types of aircraft
Iron and steel weights -|whether or not with parts of other material -|whether or not with parts of other metals -|whether or not surface treated -|whether or not printed of a kind used for the production of remote controls
Other
COPPER AND ARTICLES THEREOF
Copper mattes; cement copper (precipitated copper)
Unrefined copper; copper anodes for electrolytic refining
Refined copper and copper alloys, unwrought
Refined copper
Cathodes and sections of cathodes
Wire-bars
Billets
Other
Copper alloys
Copper-zinc base alloys (brass)
Copper-tin base alloys (bronze)
Other copper alloys (other than master alloys of heading|7405)
Copper waste and scrap
Of refined copper
Of copper alloys
Of copper-zinc base alloys (brass)
Other
Master alloys of copper
Copper powders and flakes
Powders of non-lamellar structure
Powders of lamellar structure; flakes
Copper bars, rods and profiles
Of refined copper
Of copper alloys
Of copper-zinc base alloys (brass)
Bars and rods
Profiles
Other
Copper wire
Of refined copper
Of which the maximum cross-sectional dimension exceeds 6|mm
Other
Of which the maximum cross-sectional dimension exceeds 0,5|mm
Of which the maximum cross-sectional dimension does not exceed 0,5|mm
Of copper alloys
Of copper-zinc base alloys (brass)
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
Other
Copper plates, sheets and strip, of a thickness exceeding 0,15|mm
Of refined copper
In coils
Refined copper foil and -strips, electrolytically coated
Other
Other
Of copper-zinc base alloys (brass)
In coils
Other
Of copper-tin base alloys (bronze)
In coils
Other
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
Of other copper alloys
Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,15|mm
Not backed
Of refined copper
Roll of laminate foil of graphite and copper, with: -|a width of 610|mm or more but not more than 620|mm, and -|a diameter of 690|mm or more but not more than 710|mm, for use in the manufacture of lithium-ion electric vehicle batteries
Refined copper foil and -strips, electrolytically coated
Other
Of copper alloys
Backed
Of refined copper
Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil
Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil
Sheet or plates: -|consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or -|consisting of multiple layers of paper, impregnated with phenolic resin, coated on one or both sides with a copper film with a maximum thickness of 0,15|mm
Plates: -|consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, -|covered on one or both sides with copper foilwith a thickness of not more than 0,15mm and -|with a dielectric constant (DK) of less than 3,9|and a loss factor (Df) of less than 0,015|at a measuring frequency of 10GHz, as measured according to IPC-TM-650
Plates: - consisting of at least one layer of fibreglass fabric impregnated with epoxide resin, - covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, - with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, - with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2, - with a comparative tracking index (CTI) of 600 or more
Plates, rolls and sheets of synthetic or artificial resin: -|with a maximum thickness of not more than 25µm, -|coated on both sides with a copper film with a maximum thickness of 0,15|mm, -|with a minimum capacitance of 1,09pF/mm$2, for use in the manufacture of circuit boards
Plates, rolls|or sheets: -|with at least one layer of woven glass fibre, impregnated with a fire-retardant artificial or synthetic resin with a glass transition temperature (Tg) of more than 170|°C (according to IPC-TM-650, method 2.4.25), -|coated on one or both sides with a copper film with a thickness of not more than 0,15|mm, for use in the manufacture of circuit boards
Other
Of copper alloys
Copper tubes and pipes
Of refined copper
Straight
Other
Of copper alloys
Of copper-zinc base alloys (brass)
Straight
Other
Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
Other
Copper tube or pipe fittings (for example, couplings, elbows, sleeves)
Of refined copper
Of copper alloys
Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated
With fittings attached, for use in civil aircraft
Other
Nails, tacks, drawing pins, staples (other than those of heading|8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of copper
Nails and tacks, drawing pins, staples and similar articles
Other articles, not threaded
Washers (including spring washers)
Other
Other threaded articles
Screws; bolts and nuts
Other
Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper
Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like
Cooking or heating apparatus of a kind used for domestic purposes, non-electric, and parts thereof
Other
Hand-made
Other
Sanitary ware and parts thereof
Hand-made
Other
Other articles of copper
Chain and parts thereof
Hand-made
Other
Other
Cast, moulded, stamped or forged, but not further worked
Hand-made
Other
Other
Cloth (including endless bands), grill and netting, of wire of which no cross-sectional dimension exceeds 6|mm; expanded metal
Springs
Other
Hand-made
Other
Disc (target) with deposition material, consisting of molybdenum silicide: -|containing 1mg/kg or less of sodium and -|mounted on a copper or aluminium support
Other
NICKEL AND ARTICLES THEREOF
Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy
Nickel mattes
Nickel oxide sinters and other intermediate products of nickel metallurgy
Unwrought nickel
Nickel, not alloyed
Nickel alloys
Nickel waste and scrap
Of nickel, not alloyed
Of nickel alloys
Nickel powders and flakes
Nickel bars, rods, profiles and wire
Bars, rods and profiles
Of nickel, not alloyed
Of nickel alloys
Wire
Of nickel, not alloyed
Of nickel alloys
Nickel plates, sheets, strip and foil
Of nickel, not alloyed
Of nickel alloys
Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves)
Tubes and pipes
Of nickel, not alloyed
Of nickel alloys
Tube or pipe fittings
Other articles of nickel
Cloth, grill and netting, of nickel wire
Other
ALUMINIUM AND ARTICLES THEREOF
Unwrought aluminium
Aluminium, not alloyed
Aluminium alloys
Slabs and billets
Slabs and billets of aluminium alloy containing lithium
Other
Other
Aluminium waste and scrap
Waste
Turnings, shavings, chips, milling waste, sawdust and filings; waste of coloured, coated or bonded sheets and foil, of a thickness (excluding any backing) not exceeding 0,2|mm
Other (including factory rejects)
Scrap
Aluminium powders and flakes
Powders of non-lamellar structure
Powders of lamellar structure; flakes
Aluminium bars, rods and profiles
Of aluminium, not alloyed
Bars and rods
Profiles
Bearing a specific manufacture number, for use in certain types of aircraft
Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft
Other
Of aluminium alloys
Hollow profiles
Profiles|made of| aluminium alloy conforming to EN standard AW-6063|T5 -|anodized -|whether or not|lacquered -|with a wall thickness of 0,5|mm (±|1,2|%) or more but not more than 0,8|mm (±|1,2|%) |for use in the manufacture of goods of heading 8302
Other
Other
Bars and rods
Sheets and bars of aluminium-lithium alloys
Aluminium alloy rods with a diameter of 200 mm or more, but not exceeding 300 mm
Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm
Bars and rods of aluminium alloys containing by weight : -|0,25|%|or more but not more than 7|% of zinc, and -|1|% or more but not more than 3|% of magnesium, and -|1|% or more but not more than 5|% of copper, and -|not more than 1|% of manganese consistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process
Other
Profiles
Bearing a specific manufacture number, for use in certain types of aircraft
Conical shapes for reinforcing lateral rudders, for use in certain types of aircraft
Profiles|made of| aluminium alloy conforming to EN standard AW-6063|T5 -|anodized -|whether or not|lacquered -|with a wall thickness of 0,5|mm (±|1,2|%) or more but not more than 0,8|mm (±|1,2|%) |for use in the manufacture of goods of heading 8302
Other
Aluminium wire
Of aluminium, not alloyed
Of which the maximum cross-sectional dimension exceeds 7|mm
Other
Not alloyed aluminium wire, of a diameter of 2|mm or more but not more than 6|mm, covered with a layer of copper of a thickness of 0,032|mm or more but not more than 0,117|mm
Other
Of aluminium alloys
Of which the maximum cross-sectional dimension exceeds 7|mm
Other
Wire of aluminium alloys containing by weight: -|0,10|% or more but not more than 5|% of copper, and -|0,2|% or more but not more than 6|% of magnesium, and -|0,10|% or more but not more than 7|% of zinc, and -|not more than 1|% of manganese consistent with the material specifications AMS QQ-A-430, of a kind used in aerospace industry (inter alia conforming|NADCAP|and AS9100) | and obtained by rolling mill process
Other
Aluminium plates, sheets and strip, of a thickness exceeding 0,2|mm
Rectangular (including square)
Of aluminium, not alloyed
Painted, varnished or coated with plastics
Plates bearing a specific manufacture number, for use in certain types of aircraft
Other
Other, of a thickness of
Less than 3|mm
Plates bearing a specific manufacture number, for use in certain types of aircraft
Other
Not less than 3|mm but less than 6|mm
Plates bearing a specific manufacture number, for use in certain types of aircraft
Other
Not less than 6|mm
Plates bearing a specific manufacture number, for use in certain types of aircraft
Other
Of aluminium alloys
Painted, varnished or coated with plastics
Plates bearing a specific manufacture number, for use in certain types of aircraft
Other
Other, of a thickness of
Less than 3|mm
Plates bearing a specific manufacture number, for use in certain types of aircraft
Other
Not less than 3|mm but less than 6|mm
Plates bearing a specific manufacture number, for use in certain types of aircraft
Other
Not less than 6|mm
Plates bearing a specific manufacture number, for use in certain types of aircraft
Sheets and bars of aluminium-lithium alloys
Other
Other
Of aluminium, not alloyed
Plates bearing a specific manufacture number, for use in certain types of aircraft
Other
Of aluminium alloys
Plates bearing a specific manufacture number, for use in certain types of aircraft
Other
Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0,2|mm
Not backed
Rolled but not further worked
Of a thickness of less than 0,021|mm
In rolls of a weight not exceeding 10|kg
Of a thickness of 0,007 mm or more but less than 0,021 mm
Other
Other
Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width not exceeding 650 mm
Of a thickness of not less than 0,007 mm and less than 0,008 mm, whether or not annealed
Of a thickness of not less than 0,008 mm and not more than 0,018 mm, in rolls of a width exceeding 650 mm, whether or not annealed
Of a thickness of more than 0,018 mm and less than 0,021 mm, whether or not annealed
Other
Of a thickness of not less than 0,021|mm but not more than 0,2|mm
Aluminium foil in rolls: -|having a purity of 99,99|% by weight, -|of a thickness of 0,021|mm or more but not more than 0,2|mm, -|with a width of 500|mm, -|with a surface oxide layer by 3|to 4|nm thick, -|and with a cubic texture of more than 95|%
Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers
Other
Plain aluminium foil with the following parameters: -|an aluminium content of 99,98|% or more -|a thickness of 0,070|mm or more but not more than 0,125|mm -|with a cubic texture of a kind used for high voltage etching
Other
Of a thickness of not less than 0,021 mm and not more than 0,045 mm, in rolls of a weight exceeding 10 kg, whether or not annealed, when presented with at least two layers
Other
Other
Of a thickness of less than 0,021|mm
Of a thickness of 0,007 mm or more but less than 0,021 mm, in rolls of a weight not exceeding 10 kg, not further worked than rolled, embossed
Other
Of a thickness of not less than 0,021|mm but not more than 0,2|mm
Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with: -|a width of 595|mm or more but not more than 605|mm, and -|a diameter of 690|mm or more but not more than 710|mm, for use in the manufacture of cathodes for lithium-ion electric vehicle batteries
Other
Backed
Of a thickness (excluding any backing) of less than 0,021|mm
Of a thickness (excluding any backing) of not less than 0,021|mm but not more than 0,2|mm
Aluminium laminated film of a total thickness of not more than 0,123|mm, comprising of a layer of aluminium of a thickness of not more than 0,040|mm, polyamide and polypropylene base films, and a protective coating against corrosion by hydrofluoric acid, for use in the manufacture of lithium polymer batteries
Metallised film: -|consisting of|eight or more layers of aluminium|(CAS RN 7429-90-5) of a purity|of 99,8|% or more, -|with an optical density of each aluminium layer of not more than 3.0, -|with each aluminium layer separated by a resin layer, -|on a carrier film of PET, and -|on rolls of up to 50|000|metres in length
Other
Aluminium tubes and pipes
Of aluminium, not alloyed
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft
Other
Of aluminium alloys
Welded
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft
Other
Other
Not further worked than extruded
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Other
Other
With attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Tubes and pipes, ready for fitting, usable as hydraulic conduits or as conduits for fuel-oil or lubricants for use in certain types of aircraft
Seamless aluminium alloyed extruded tubes with: -|an outer diameter of 60|mm or more but not more than 420|mm, and -|a|wall thickness of 10|mm or more but not more than 80|mm
Other
Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves)
For use in certain types of aircraft
Other
Aluminium structures (excluding prefabricated buildings of heading|9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures
Doors, windows and their frames and thresholds for doors
Other
Bridges and bridge-sections, towers and lattice masts
Other
Aluminium reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300|litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300|litres, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
Collapsible tubular containers
Other
Containers of a kind used for aerosols
Manufactured from foil of a thickness not exceeding 0,2|mm
Other
Aluminium containers for compressed or liquefied gas
Bottles for inflating escape chutes, intended for use in certain types of aircraft
Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172|l (±|10|%) and an unfilled weight of not more than 64|kg
Other
Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated
With steel core
Other
Table, kitchen or other household articles and parts thereof, of aluminium; pot scourers and scouring or polishing pads, gloves and the like, of aluminium; sanitary ware and parts thereof, of aluminium
Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like
Cast
Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
Other
Manufactured from foil of a thickness not exceeding 0,2|mm
Other
Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
Other
Sanitary ware and parts thereof
Other articles of aluminium
Nails, tacks, staples (other than those of heading|8305), screws, bolts, nuts, screw hooks, rivets, cotters, cotter pins, washers and similar articles
Self-locking bolts and nuts (of the type "Hi-lok")
Other
For use in certain types of aircraft
Other
Other
Cloth, grill, netting and fencing, of aluminium wire
Other
Cast
Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft
"Quick change" apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft
Aluminium engine bracket, with dimensions of: -|height of more than 10|mm but not more than 200|mm -|width of more than 10|mm but not more than 200|mm -|length of more than 10|mm but not more than 200|mm equipped with at least two fixing holes, made of aluminium alloys ENAC-46100|or ENAC-42100|(based on the norm EN:1706) with following characteristics: -|internal porosity not more than 1|mm; -|outer porosity not more than 2|mm; -|Rockwell hardness HRB 10|or more of a kind used in the production of suspensions systems for engines in motor vehicles
Other
Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
Other
Other
Hand-made
Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
Other
Other
Collars, flanges and other devices for fixing, jointing, clamping or spacing, for use in certain types of aircraft
Honeycomb aluminium blocks of the type used in the manufacture of aircraft parts
"Quick change" apparatus for transforming passenger transport aeroplanes into goods transport aeroplanes and vice versa, for use in certain types of aircraft
Metallised film: -|consisting of|eight or more layers of aluminium|(CAS RN 7429-90-5) of a purity|of 99,8|% or more, -|with an optical density of each aluminium layer of not more than 3.0, -|with each aluminium layer separated by a resin layer, -|on a carrier film of PET, and -|on rolls of up to 50|000|metres in length
Plates and sheets of variable thickness of widths of 1|200|mm or more, for use in certain types of aircraft
Disc (target) with deposition material, consisting of molybdenum silicide: -|containing 1mg/kg or less of sodium and -|mounted on a copper or aluminium support
Connecting components for use in the production of helicopter tail rotor shafts
Parts in the shape of a rectangular frame: -|of painted aluminium, -|with a length of|1|011|mm or more but not more than 1|500|mm, -|with a width of 622|mm or more but not more than 900|mm, -|with a thickness of 0,6|mm (± 0,1|mm), of a kind used in the manufacture of TV sets
Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body
Other
Aluminium radiators and elements or sections of which such radiator is composed, whether or not such elements are assembled in blocks
Other
LEAD AND ARTICLES THEREOF
Unwrought lead
Refined lead
Other
Containing by weight antimony as the principal other element
For refining, containing 0,02|% or more by weight of silver (bullion lead)
Other
Other
For refining, containing 0,02|% or more by weight of silver (bullion lead)
Other
Lead waste and scrap
Lead plates, sheets, strip and foil; lead powders and flakes
Plates, sheets, strip and foil
Sheets, strip and foil of a thickness (excluding any backing) not exceeding 0,2|mm
Other
Powders and flakes
Other articles of lead
Containers with an anti-radiation lead covering, for the transport or storage of radioactive materials
Other
ZINC AND ARTICLES THEREOF
Unwrought zinc
Zinc, not alloyed
Containing by weight 99,99|% or more of zinc
Containing by weight less than 99,99|% of zinc
Containing by weight 99,95|% or more but less than 99,99|% of zinc
Containing by weight 98,5|% or more but less than 99,95|% of zinc
Containing by weight 97,5|% or more but less than 98,5|% of zinc
Zinc alloys
Zinc waste and scrap
Zinc dust, powders and flakes
Zinc dust
Other
Zinc bars, rods, profiles and wire
Zinc plates, sheets, strip and foil
Other articles of zinc
TIN AND ARTICLES THEREOF
Unwrought tin
Tin, not alloyed
Tin alloys
Tin waste and scrap
Tin bars, rods, profiles and wire
Other articles of tin
Plates, sheets and strip, of a thickness exceeding 0,2|mm
Other
OTHER BASE METALS; CERMETS; ARTICLES THEREOF
Tungsten (wolfram) and articles thereof, including waste and scrap
Powders
Other
Unwrought tungsten, including bars and rods obtained simply by sintering
Wire
Tungsten wire containing by weight 99|% or more of tungsten with: -|a maximum cross-sectional dimension of not more than 50|µm -|a resistance of 40|Ohm or more but not more than 300|Ohm at length of 1|metre of a kind used in the production of heated car front windows
Other
Waste and scrap
Other
Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil
Tungsten bars and rods for welding electrodes, containing 94|% or more by weight of tungsten, whether or not cut to length
Other
Other
Molybdenum and articles thereof, including waste and scrap
Powders
Molybdenum powder with -|a purity by weight of 99|% or more and -|a particle size of 1,0|µm or more, but not more than 5,0|µm
Other
Other
Unwrought molybdenum, including bars and rods obtained simply by sintering
Bars and rods, other than those obtained simply by sintering, profiles, plates, sheets, strip and foil
Wire
Molybdenum wire, containing by weight at least 99,95|% of molybdenum, of which the maximum cross-sectional dimension exceeds 1,35|mm but does not exceed 4,0|mm
Consigned from Malaysia
Other
Molybdenum wire, containing by weight at least 99,95 % of molybdenum, of which the maximum cross-sectional dimension exceeds 4,0 mm but does not exceed 11,0 mm
Molybdenum wire, containing by weight 97 % or more but less than 99,95 % of molybdenum, of which the maximum cross-sectional dimension exceeds 1,35 mm but does not exceed 4,0 mm
Molybdenum wire, containing by weight 97 % or more but less than 99,95 % of molybdenum, of which the maximum cross-sectional dimension exceeds 4,0 mm but does not exceed 11,0 mm
Other
Waste and scrap
Other
Tantalum and articles thereof, including waste and scrap
Unwrought tantalum, including bars and rods obtained simply by sintering; powders
Waste and scrap
Other
Bars and rods, other than those obtained simply by sintering, profiles, wire, plates, sheets, strip and foil
Other
Tantalum sputtering target with: -|a Copper-Chromium alloy backing plate, -|a diameter of 312|mm, and -|a thickness of 6,3|mm
Other
Magnesium and articles thereof, including waste and scrap
Unwrought magnesium
Containing at least 99,8|% by weight of magnesium
Other
Waste and scrap
Raspings, turnings and granules, graded according to size; powders
Magnesium powder with a particle size of 0,2|mm or more but not more than 0,8|mm
Of purity by weight of 98% or more, but not more than 99,5%
of purity by weight of more than 99,5|%
Other
Other
Other
Ground and polished magnesium sheets, of dimensions not more than 1500|mm|!x!|2000|mm, coated on one side with an epoxy resin insensitive to light
Other
Cobalt mattes and other intermediate products of cobalt metallurgy; cobalt and articles thereof, including waste and scrap
Cobalt mattes and other intermediate products of cobalt metallurgy; unwrought cobalt; powders
Waste and scrap
Other
Bars or wires made of cobalt alloy containing, by weight : -|35|% (± 2|%) cobalt, -|25|% (± 1|%)|nickel, -|19|% (± 1|%) chromium and -|7|% (± 2|%) iron conforming to the material specifications AMS 5842, of a kind used in the aerospace industry
Other
Bismuth and articles thereof, including waste and scrap
Unwrought bismuth; waste and scrap; powders
Other
Cadmium and articles thereof, including waste and scrap
Unwrought cadmium; powders
Waste and scrap
Other
Titanium and articles thereof, including waste and scrap
Unwrought titanium; powders
Titanium sponge
Titanium powder of which 90|% by weight or more passes through a sieve with an aperture of 0,224|mm
Titanium alloy ingot, -|with a height of 17,8|cm or more, a length of 180|cm or more and a width of 48,3cm or more, -|a weight of 680|kg or more, containing alloy elements by weight of:: -|3|% or more but not more than 6|% of aluminium -|2,5|% or more but not more than 5|% of tin -|2,5|% or more but not more than 4,5|% of zirconium -|0,2|% or more but not more than 1|% of niobium -|0,1|% or more but not more than 1|% of molybdenum 0,1|% or more but not more than 0,5|% of silicon
Titanium alloy ingot, -|with a height of 17,8|cm or more, a length of 180|cm or more and a width of 48,3|cm or more, -|a weight of 680|kg or more, containing alloy elements by weight of: -|3|% or more but not more than 7|% of aluminium -|1|% or more but not more than 5|% of tin -|3|% or more but not more than 5|% of zinc -|4|% or more but not more than 8|% of molybdenum
Titanium alloy ingot, -|with a diameter of 63,5|cm or more and a length of 450|cm or more, -|a weight of 6350|kg or more, containing alloy elements by weight of: -|5,5|% or more but not more than 6,7|% of aluminium, -|3,7|% of more but not more than 4,9|% of vanadium
Other
Waste and scrap
Waste and scrap of titanium and titanium alloys, except those containing by weight 1|% or more but not more than 2|% of aluminium
Other
Other
Bars, rods, profiles and wire
Titanium alloy rods complying with standard EN 2002-1, EN 4267|or DIN 65040
Bars, rods and wire of alloy of titanium and aluminium, containing by weight 1|% or more but not more than 2|% of aluminium, for use in the manufacture of silencers and exhaust pipes of subheadings 8708|92|or 8714|10|00|90
Wire of an titanium alloy containing by weight -|22|%|(±|3|%) of vanadium and -|4|%|(±|0,5|%) of aluminium
Titanium-aluminium-vanadium alloy (TiAl6V4) wire, complying with AMS standards 4928, 4965|and 4967
Other
Plates, sheets, strip and foil
Alloy of titanium and aluminium, containing by weight 1|% or more but not more than 2|% of aluminium, in sheets or rolls, of a thickness of 0,49|mm or more but not more than 3,1|mm, of a width of 1|000|mm or more but not more than 1|254|mm, for the manufacture of goods of subheading 8714|10|00
Alloy of titanium, copper, tin, silicon, and niobium containing by weight: -|0,8|% or more but not more than 1,2|% of copper, -|0,9|% or more but not more than 1,15|% of tin, -|0,25|% or more but not more than 0,45|% of silicon and -|0,2|% or more but not more than 0,35|% of niobium, in sheets, plates, strips or foil
Alloy of titanium and silicon, containing by weight 0.15% or more but not more than 0.60% of silicon, in sheets or rolls, for use in the manufacture of: - exhaust systems for internal combustion engines or - tubes and pipes of subheading 8108|90|60
Plates, sheets, strips and foils of an alloy of titanium, copper and niobium, containing by weight 0,8|% or more but not more than 1,2|% of copper and 0,4|% or more but not more than 0,6|% of niobium
Plates, sheets, strips and foils of an alloy of titanium, aluminium, silicon and niobium, containing by weight: -|0,4|% or more but not more than 0,6|% of aluminium, -|0,35|% or more but not more than 0,55|% of silicon and -|0,1|% or more but not more than 0,3|% of niobium
Strip of an alloy of titanium, containing by weight -|15|% (± 1|%) of vanadium -|3|% (± 0,5|%) of chromium -|3|% (± 0,5|%) of tin and -|3|% (± 0,5|%) of aluminium
Plates, sheets, strips and foil of titanium alloy, containing by weight: -|0,3|% or more but not more than 0,7|% of aluminium and -|0,25|% or more but not more than 0,6|% of silicon
Plates, sheets, strips and foil of non-alloyed titanium - of a width of more than 750 mm - of a thickness of not more than 3 mm
Strip or foil of non-alloyed titanium: -|containing more than 0,07|% by weight of oxygen (O@2), -|of a thickness of 0,4|mm or more but not more than 2,5|mm -|conforming to the Vickers hardness HV1|standard of not more than 170 of a kind used in the manufacture of welded tubes for nuclear power plant condensers
Other
Tubes and pipes
Tubes and pipes, with attached fittings, suitable for conducting gases or liquids, for use in civil aircraft
Thin-walled tubes ready for use in ventilation and air-conditioning systems, for use in certain types of aircraft
Other
Other
Self-locking bolts and nuts (of the type "Hi-lok")
Parts of spectacle frames and mountings, including bolts of the kind used for spectacle frames and mountings, of an alloy of titanium
Other
Bolts, nuts, screws, rivets and similar articles complying with US standards, for use in certain types of aircraft
Other
Zirconium and articles thereof, including waste and scrap
Unwrought zirconium; powders
Non-alloy zirconium sponges or ingots, containing by weight more than 0,01|% of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry
Other
Waste and scrap
Other
Antimony and articles thereof, including waste and scrap
Unwrought antimony; powders
Antimony in the form of ingots
Other
Waste and scrap
Other
Manganese and articles thereof, including waste and scrap
Unwrought manganese; waste and scrap; powders
Unwrought manganese; powders
Waste and scrap
Other
Beryllium, chromium, germanium, vanadium, gallium, hafnium, indium, niobium (columbium), rhenium and thallium, and articles of these metals, including waste and scrap
Beryllium
Unwrought; powders
Waste and scrap
Other
Chromium
Unwrought; powders
Alloys containing more than 10|% by weight of nickel
Other
Waste and scrap
Other
Thallium
Unwrought; powders
Waste and scrap
Other
Other
Unwrought; waste and scrap; powders
Hafnium (celtium)
Niobium (columbium); rhenium; gallium; indium; vanadium; germanium
Waste and scrap
Other
Niobium (columbium); rhenium
Indium
Gallium
Vanadium
Germanium
Other
Hafnium (celtium); germanium
Hafnium (celtium)
Germanium
Niobium (columbium); rhenium
Alloy of niobium (columbium) and titanium, in the form of bars and rods
Other
Gallium; indium; vanadium
Cermets and articles thereof, including waste and scrap
Unwrought
Cermet blocks containing by weight 60|% or more of aluminium and 5|% or more of boron carbide
Other
Waste and scrap
Other
Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits
Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules
Other
TOOLS, IMPLEMENTS, CUTLERY, SPOONS AND FORKS, OF BASE METAL; PARTS THEREOF OF BASE METAL
Hand tools, the following: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, billhooks and similar hewing tools; secateurs and pruners of any kind; scythes, sickles, hay knives, hedge shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry
Spades and shovels
Mattocks, picks, hoes and rakes
Axes, billhooks and similar hewing tools
Secateurs and similar one-handed pruners and shears (including poultry shears)
Hedge shears, two-handed pruning shears and similar two-handed shears
Other hand tools of a kind used in agriculture, horticulture or forestry
Handsaws; blades for saws of all kinds (including slitting, slotting or toothless saw blades)
Handsaws
Bandsaw blades
Circular saw blades (including slitting or slotting saw blades)
With working part of steel
Other, including parts
Chainsaw blades
Other saw blades
Straight saw blades, for working metal
Other
For working metal
For working other materials
Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal-cutting shears, pipe-cutters, bolt croppers, perforating punches and similar hand tools
Files, rasps and similar tools
Pliers (including cutting pliers), pincers, tweezers and similar tools
Metal-cutting shears and similar tools
Pipe-cutters, bolt croppers, perforating punches and similar tools
Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); interchangeable spanner sockets, with or without handles
Hand-operated spanners and wrenches
Non-adjustable
Adjustable
Interchangeable spanner sockets, with or without handles
Hand tools (including glaziers' diamonds), not elsewhere specified or included; blowlamps; vices, clamps and the like, other than accessories for and parts of machine tools; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks
Drilling, threading or tapping tools
Hammers and sledge hammers
Planes, chisels, gouges and similar cutting tools for working wood
Screwdrivers
Other hand tools (including glaziers' diamonds)
Household tools
Other
Tools for masons, moulders, cement workers, plasterers and painters
Other
Blowlamps
Vices, clamps and the like
Other, including sets of articles of two or more subheadings of this heading
Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks
Sets of articles of two or more subheadings of this heading
Tools of two or more of headings|8202|to 8205, put up in sets for retail sale
Interchangeable tools for hand tools, whether or not power-operated, or for machine tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock-drilling or earth-boring tools
Rock-drilling or earth-boring tools
With working part of cermets
Other, including parts
With working part of diamond or agglomerated diamond
Inserts for drilling tools with working parts of agglomerated diamonds
Other
Other
Dies for drawing or extruding metal
With working part of diamond or agglomerated diamond
With working part of other materials
Tools for pressing, stamping or punching
For working metal
Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts of motor vehicles
Other
Other
Tools for tapping or threading
For working metal
Tools for tapping
Tools for threading
Other
Tools for drilling, other than for rock-drilling
With working part of diamond or agglomerated diamond
With working part of other materials
Masonry drills
Other
For working metal, with working part
Of cermets
Of high speed steel
Of other materials
Other
Tools for boring or broaching
With working part of diamond or agglomerated diamond
With working part of other materials
Tools for boring
For working metal
Other
Tools for broaching
For working metal
Other
Tools for milling
For working metal, with working part
Of cermets
Of other materials
Shank type
Other
Other
Tools for turning
For working metal, with working part
Of cermets
Of other materials
Other
Other interchangeable tools
With working part of diamond or agglomerated diamond
With working part of other materials
Screwdriver bits
Gear-cutting tools
Other, with working part
Of cermets
For working metal
Other
Of other materials
For working metal
Other
Knives and cutting blades, for machines or for mechanical appliances
For metalworking
For woodworking
For kitchen appliances or for machines used by the food industry
For agricultural, horticultural or forestry machines
Other
Plates, sticks, tips and the like for tools, unmounted, of cermets
Indexable inserts
Other
Hand-operated mechanical appliances, weighing 10|kg or less, used in the preparation, conditioning or serving of food or drink
Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading|8208, and blades therefor
Sets of assorted articles
Other
Table knives having fixed blades
Other knives having fixed blades
Knives having other than fixed blades
Blades
Handles of base metal
Razors and razor blades (including razor blade blanks in strips)
Razors
Safety razors with non-replaceable blades
Other
Safety razor blades, including razor blade blanks in strips
Other parts
Scissors, tailors' shears and similar shears, and blades therefor
Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, choppers and mincing knives, paperknives); manicure or pedicure sets and instruments (including nail files)
Paperknives, letter openers, erasing knives, pencil sharpeners and blades therefor
Manicure or pedicure sets and instruments (including nail files)
Other
Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware
Sets of assorted articles containing at least one article plated with precious metal
Containing only articles plated with precious metal
Other
Of stainless steel
Other
Other sets of assorted articles
Of stainless steel
Other
Other
Plated with precious metal
Other
Of stainless steel
Other
MISCELLANEOUS ARTICLES OF BASE METAL
Padlocks and locks (key, combination or electrically operated), of base metal; clasps and frames with clasps, incorporating locks, of base metal; keys for any of the foregoing articles, of base metal
Padlocks
Locks of a kind used for motor vehicles
Locks of a kind used for furniture
Other locks
Locks of a kind used for doors of buildings
Cylinder
Other
Other locks
Clasps and frames with clasps, incorporating locks
Parts
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Other
Keys presented separately
Base-metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base-metal hat-racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal
Hinges
For use in civil aircraft
Other
Castors
For use in civil aircraft
Castors, with -|an external diameter of 21|mm or more but not more than 23|mm, -|a width with screw of 19|mm or more but not more than 23|mm, -|a U-shaped plastic outer ring, -|an assembly screw fitted to the internal diameter and used as an inner ring
Other
Other mountings, fittings and similar articles suitable for motor vehicles
Other mountings, fittings and similar articles
Suitable for buildings
For doors
For windows and French windows
Other
Other, suitable for furniture
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Aluminium telescopic handle for use in the manufacture of luggage
Other
Hat-racks, hat-pegs, brackets and similar fixtures
Automatic door closers
For use in civil aircraft
Other
Armoured or reinforced safes, strongboxes and doors and safe deposit lockers for strong-rooms, cash or deed boxes and the like, of base metal
Armoured or reinforced safes, strongboxes and doors and safe deposit lockers for strongrooms
Cash or deed boxes and the like
Filing cabinets, card-index cabinets, paper trays, paper rests, pen trays, office-stamp stands and similar office or desk equipment, of base metal, other than office furniture of heading|9403
Fittings for loose-leaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal
Fittings for loose-leaf binders or files
Ring binder mechanisms (other than those with 17 or 23 rings) consisting of two rectangular steel sheets or wires with at least four half rings made of steel wire fixed on it and which are kept together by a steel cover; they can be opened either by pulling the half rings or with a small steel-made trigger mechanism fixed to the ring binder mechanism
Consigned from Vietnam
Consigned from Lao People's Democratic Republic
Other
Ring binder mechanisms consisting of two rectangular steel sheets or wires with 17 or 23 rings made of steel wire fixed on it and which are kept together by a steel cover; they can be opened either by pulling the half rings or with a small steel-made trigger mechanism fixed to the ring binder mechanism
Consigned from Vietnam
Consigned from Lao People's Democratic Republic
Other
Other ring binder mechanisms
Ring binder mechanisms (other than those with 17 or 23 rings) consisting of two steel sheets or wires with at least four half rings made of steel wire fixed on it and which are kept together by a steel cover; they can be opened either by pulling the half rings or with a small steel-made trigger mechanism fixed to the ring binder mechanism
Ring binder mechanisms consisting of two steel sheets or wires with 17 or 23 rings made of steel wire fixed on it and which are kept together by a steel cover; they can be opened either by pulling the half rings or with a small steel-made trigger mechanism fixed to the ring binder mechanism
Ring binder mechanisms consisting of more than two steel sheets or wires with at least four half rings made of steel wire fixed on it and which are kept together by a steel cover; they can be opened either by pulling the half rings or with a small steel-made trigger mechanism fixed to the ring binder mechanism
Other
Lever arch mechanisms for archiving sheets and other documents in binders and files consisting of arched sturdy metal elements (normally two) on a back plate and having at least one opening trigger that permits inserting and filing of sheets and other documents
Other
Staples in strips
Other, including parts
Bells, gongs and the like, non-electric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal
Bells, gongs and the like
Statuettes and other ornaments
Plated with precious metal
Other
Photograph, picture or similar frames; mirrors
Flexible tubing of base metal, with or without fittings
Of iron or steel
With fittings attached, for use in civil aircraft
Other
Of other base metal
With fittings attached, for use in civil aircraft
Other
Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing, footwear, awnings, handbags, travel goods or other made-up articles, tubular or bifurcated rivets, of base metal; beads and spangles of base metal
Hooks, eyes and eyelets
Tubular or bifurcated rivets
For use in certain types of aircraft
Other
Other, including parts
Beads and spangles, hand-made
Other
Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal
Crown corks
Other
Capsules of lead; capsules of aluminium of a diameter exceeding 21|mm
Other
Aluminium can ends: -|with a diameter of 99,00|mm or more but not more than 136,5|mm (±1mm), -|whether or not with a "ring-pull" aperture
Other
Sign-plates, nameplates, address-plates and similar plates, numbers, letters and other symbols, of base metal, excluding those of heading|9405
Wire, rods, tubes, plates, electrodes and similar products, of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying
Coated electrodes of base metal, for electric arc-welding
Cored wire of base metal, for electric arc-welding
Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame
Other
NUCLEAR REACTORS, BOILERS, MACHINERY AND MECHANICAL APPLIANCES; PARTS THEREOF
Nuclear reactors; fuel elements (cartridges), non-irradiated, for nuclear reactors; machinery and apparatus for isotopic separation
Nuclear reactors
Machinery and apparatus for isotopic separation, and parts thereof
Fuel elements (cartridges), non-irradiated
Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors
Other
Parts of nuclear reactors
Stainless steel absorber control rods, filled with neutron absorbing chemical elements
Other
Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); superheated water boilers
Steam or other vapour generating boilers
Watertube boilers with a steam production exceeding 45|tonnes per hour
Watertube boilers with a steam production not exceeding 45|tonnes per hour
Other vapour generating boilers, including hybrid boilers
Firetube boilers
Other
Superheated water boilers
Parts
Central heating boilers other than those of heading|8402
Boilers
Of cast iron
Other
Parts
Of cast iron
Other
Auxiliary plant for use with boilers of heading|8402|or 8403|(for example, economisers, superheaters, soot removers, gas recoverers); condensers for steam or other vapour power units
Auxiliary plant for use with boilers of heading|8402|or 8403
Condensers for steam or other vapour power units
Parts
Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers
Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers
Parts
Metal casing for automobile|safety belt pre-tension gas generators
Other
Steam turbines and other vapour turbines
Turbines for marine propulsion
Other turbines
Of an output exceeding 40|MW
Of an output not exceeding 40|MW
Parts
Stator blades, rotors and their blades
Other
Spark-ignition reciprocating or rotary internal combustion piston engines
Aircraft engines
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Marine propulsion engines
Outboard motors
Of a cylinder capacity not exceeding 325|cm$3
Of a cylinder capacity exceeding 325|cm$3
Of a power not exceeding 30|kW
Of a power exceeding 30|kW
Other
Reciprocating piston engines of a kind used for the propulsion of vehicles of Chapter|87
Of a cylinder capacity not exceeding 50|cm$3
Of a cylinder capacity exceeding 50|cm$3|but not exceeding 250|cm$3
Of a cylinder capacity exceeding 50|cm$3|but not exceeding 125|cm$3
Of a cylinder capacity exceeding 125|cm$3|but not exceeding 250|cm$3
Of a cylinder capacity exceeding 250|cm$3|but not exceeding 1|000|cm$3
Of a cylinder capacity exceeding 250|cm$3|but not exceeding 500|cm$3
Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300|cm$3|and a power of not less than 6|kW but not exceeding 20,0|kW, for the manufacture of: -|self-propelled lawn mowers, with a seat of subheading 8433|11|51, and hand-operated lawn mowers of heading 8433|11|90, -|tractors of subheading 8701|90|11, whose main function is that of a lawn mower, -|four stroke mowers with motor of a cylinder capacity of not less than 300|cc of subheading 8433|20|10|or -|snowploughs and snow blowers of subheading 8430|20
Other
Of a cylinder capacity exceeding 500|cm$3|but not exceeding 1000|cm$3
Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300|cm$3|and a power of not less than 6|kW but not exceeding 20,0|kW, for the manufacture of: -|self-propelled lawn mowers, with a seat of subheading 8433|11|51, and hand-operated lawn mowers of heading 8433|11|90, -|tractors of subheading 8701|90|11, whose main function is that of a lawn mower, -|four stroke mowers with motor of a cylinder capacity of not less than 300|cc of subheading 8433|20|10|or -|snowploughs and snow blowers of subheading 8430|20
Other
Of a cylinder capacity exceeding 1|000|cm$3
For the industrial assembly of: pedestrian-controlled tractors of subheading|8701|10; motor vehicles of heading|8703; motor vehicles of heading|8704|with an engine of a cylinder capacity of less than 2|800|cm$3; motor vehicles of heading|8705
Other
Used
New, of a cylinder capacity
Not exceeding 1|500|cm$3
Exceeding 1|500|cm$3
Other engines
Of a cylinder capacity not exceeding 250|cm$3
Four-stroke petrol engines of a cylinder capacity of not more than 250cm³ for use in the manufacture of lawnmowers of sub-heading 8433|11, mowers with motor of subheading 8433|20|10, rotovators of sub-heading 8432|29|50, garden shredders of subheading 8436|80|90 or scarifiers of subheading 8432|29|10
Other
Of a cylinder capacity exceeding 250|cm$3
For the industrial assembly of: pedestrian-controlled tractors of subheading|8701|10; motor vehicles of heading|8703; motor vehicles of heading|8704|with an engine of a cylinder capacity of less than 2|800|cm$3; motor vehicles of heading|8705
Other
Of a power not exceeding 10|kW
Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of: •self-propelled lawn mowers, with a seat of subheading 8433 11 51, and hand-operated lawn mowers of heading 8433 11 90, •tractors of subheading 8701 90 11, whose main function is that of a lawn mower, •four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 8433 20 10 or •snowploughs and snow blowers of subheading 8430 20
Other
Of a power exceeding 10|kW
Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm³ and a power of not less than 6 kW but not exceeding 20,0 kW, for the manufacture of: •self-propelled lawn mowers, with a seat of subheading 8433 11 51, and hand-operated lawn mowers of heading 8433 11 90, •tractors of subheading 8701 90 11, whose main function is that of a lawn mower, •four stroke mowers with motor of a cylinder capacity of not less than 300 cc of subheading 8433 20 10 or •snowploughs and snow blowers of subheading 8430 20
Compact Liquid Petroleum Gas (LPG) Engine System, with: -|6|cylinders, -|an output of 75|kW or more, but not more than 80|kW, -|inlet and exhaust valves modified to operate|continuously in heavy duty applications, for use in the manufacture of vehicles of heading 8427
Other
Compression-ignition internal combustion piston engines (diesel or semi-diesel engines)
Marine propulsion engines
Used
For seagoing vessels of headings|8901|to 8906, tugs of subheading|8904|00|10|and warships of subheading|8906|10|00
Other
New, of a power
Not exceeding 50|kW
For seagoing vessels of headings|8901|to 8906, tugs of subheading|8904|00|10|and warships of subheading|8906|10|00
Other
Exceeding 50|kW but not exceeding 100|kW
For seagoing vessels of headings|8901|to 8906, tugs of subheading|8904|00|10|and warships of subheading|8906|10|00
Other
Exceeding 100|kW but not exceeding 200|kW
For seagoing vessels of headings|8901|to 8906, tugs of subheading|8904|00|10|and warships of subheading|8906|10|00
Other
Exceeding 200|kW but not exceeding 300|kW
For seagoing vessels of headings|8901|to 8906, tugs of subheading|8904|00|10|and warships of subheading|8906|10|00
Other
Exceeding 300|kW but not exceeding 500|kW
For seagoing vessels of headings|8901|to 8906, tugs of subheading|8904|00|10|and warships of subheading|8906|10|00
Other
Exceeding 500|kW but not exceeding 1|000|kW
For seagoing vessels of headings|8901|to 8906, tugs of subheading|8904|00|10|and warships of subheading|8906|10|00
Other
Exceeding 1|000|kW but not exceeding 5|000|kW
For seagoing vessels of headings|8901|to 8906, tugs of subheading|8904|00|10|and warships of subheading|8906|10|00
Other
Exceeding 5|000|kW
For seagoing vessels of headings|8901|to 8906, tugs of subheading|8904|00|10|and warships of subheading|8906|10|00
Other
Engines of a kind used for the propulsion of vehicles of Chapter|87
For the industrial assembly of: pedestrian-controlled tractors of subheading|8701|10; motor vehicles of heading|8703; motor vehicles of heading|8704|with an engine of a cylinder capacity of less than 2|500|cm$3; motor vehicles of heading|8705
Other
For wheeled agricultural or forestry tractors, of a power
Not exceeding 50|kW
Exceeding 50|kW but not exceeding 100|kW
Exceeding 100|kW
For other vehicles of Chapter|87, of a power
Not exceeding 50|kW
Exceeding 50|kW but not exceeding 100|kW
Exceeding 100|kW but not exceeding 200|kW
Exceeding 200|kW
Other engines
For rail traction
Other
Used
For use in civil aircraft
Other
New, of a power
Not exceeding 15|kW
For use in civil aircraft
Diesel engines of a power of not more than 15|kW, with 2|or 3|cylinders, for use in the manufacture of vehicle mounted temperature control systems
Other
Exceeding 15|kW but not exceeding 30|kW
For use in civil aircraft
Diesel engines of a power of not more than 30|kW, with 4|cylinders, for use in the manufacture of vehicle mounted temperature control systems
4|Cylinder, 4|cycle, liquid cooled, compression-ignition engine having: -|a capacity of not more than 3|850|cm$3, and -|a rated output of 15|kW or more but not more than 85|kW, for use in the manufacture of vehicles of heading 8427
Other
Exceeding 30|kW but not exceeding 50|kW
For use in civil aircraft
4|Cylinder, 4|cycle, liquid cooled, compression-ignition engine having: -|a capacity of not more than 3|850|cm$3, and -|a rated output of 15|kW or more but not more than 85|kW, for use in the manufacture of vehicles of heading 8427
Other
Exceeding 50|kW but not exceeding 100|kW
For use in civil aircraft
Other
4|Cylinder, 4|cycle, liquid cooled, compression-ignition engine having: -|a capacity of not more than 3|850|cm$3, and -|a rated output of 15|kW or more but not more than 85|kW, for use in the manufacture of vehicles of heading 8427
Other
Exceeding 100|kW but not exceeding 200|kW
For use in civil aircraft
Other
Exceeding 200|kW but not exceeding 300|kW
For use in civil aircraft
Other
Exceeding 300|kW but not exceeding 500|kW
For use in civil aircraft
Other
Exceeding 500|kW but not exceeding 1|000|kW
For use in civil aircraft
Other
Exceeding 1|000|kW but not exceeding 5|000|kW
For use in civil aircraft
Other
Exceeding 5|000|kW
For use in civil aircraft
Other
Parts suitable for use solely or principally with the engines of heading|8407|or 8408
For aircraft engines
For engines for use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Other
Suitable for use solely or principally with spark-ignition internal combustion piston engines
Exhaust manifold complying with standard DIN EN 13835, whether or not with turbine housing, with four inlet ports, for use in the manufacture of exhaust manifold that is turned, milled, drilled and/or processed by other means
Other
Other
Injectors with solenoid valve for optimised atomisation in the engine combustion chamber
Exhaust manifold complying with standard DIN EN 13835, whether or not with turbine housing, with four inlet ports, for use in the manufacture of exhaust manifold that is turned, milled, drilled and/or processed by other means
Spiral-shaped gas turbine turbocharger component: -|with a heat-resistance of not more than 1|050|°C, -|with a turbine wheel hole diameter of 30|mm or more, but not more than 110|mm, -|whether or not with an engine exhaust manifold
Other
Hydraulic turbines, water wheels, and regulators therefor
Hydraulic turbines and water wheels
Of a power not exceeding 1|000|kW
Of a power exceeding 1|000|kW but not exceeding 10|000|kW
Of a power exceeding 10|000|kW
Parts, including regulators
Turbojets, turbopropellers and other gas turbines
Turbojets
Of a thrust not exceeding 25|kN
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Of a thrust exceeding 25|kN
Of a thrust exceeding 25|kN but not exceeding 44|kN
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Of a thrust exceeding 44|kN but not exceeding 132|kN
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Of a thrust exceeding 132|kN
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Turbopropellers
Of a power not exceeding 1|100|kW
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Of a power exceeding 1|100|kW
Of a power exceeding 1|100|kW but not exceeding 3|730|kW
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Of a power exceeding 3|730|kW
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Other gas turbines
Of a power not exceeding 5|000|kW
For use in civil aircraft
Other
Of a power exceeding 5|000|kW
Of a power exceeding 5|000|kW but not exceeding 20|000|kW
For use in civil aircraft
Other
Of a power exceeding 20|000|kW but not exceeding 50|000|kW
For use in civil aircraft
Other
Of a power exceeding 50|000|kW
For use in civil aircraft
Other
Parts
Of turbojets or turbopropellers
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Other
Of gas turbines, for use in civil aircraft
Other
Wheel-shaped gas turbine component with blades, of a kind used in turbochargers: -|of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN NiCo10W10Cr9AlTi or AMS AISI:686, -|with a heat-resistance of not more than 1|100|°C; -|with a diameter of 30|mm or more, but not more than 100|mm; -|with a height of 20|mm or more, but not more than 70|mm
Spiral-shaped gas turbine turbocharger component: -|with a heat-resistance of not more than 1|050|°C, -|with a turbine wheel hole diameter of 30|mm or more, but not more than 110|mm, -|whether or not with an engine exhaust manifold
Actuator for a single-stage turbocharger: -|whether or not with conducting horns and connecting sleeves, having an operating distance of 20|mm or more but not more than 40|mm, -|with a length of not more than 350|mm, -|with a diameter of not more than 75|mm, -|with a height of not more than 110|mm
Other
Other engines and motors
Reaction engines other than turbojets
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Hydraulic power engines and motors
Linear acting (cylinders)
Hydraulic systems
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other
Hydraulic systems
For use in civil aircraft
Other
Other
Hydraulic fluid power motors
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Pneumatic power engines and motors
Linear acting (cylinders)
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other
Steam or other vapour power engines
Other
For use in civil aircraft
Other
Parts
Of reaction engines other than turbojets
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Of hydraulic power engines and motors
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Pumps for liquids, whether or not fitted with a measuring device; liquid elevators
Pumps fitted or designed to be fitted with a measuring device
Pumps for dispensing fuel or lubricants, of the type used in filling stations or in garages
Other
For use in civil aircraft
Other
Handpumps, other than those of subheading|8413|11|or 8413|19
For use in civil aircraft
Other
Fuel, lubricating or cooling medium pumps for internal combustion piston engines
Injection pumps
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Concrete pumps
Other reciprocating positive displacement pumps
Hydraulic units
For use in civil aircraft
Other
Dosing and proportioning pumps
For use in civil aircraft
Other
Other
Piston pumps
Hydraulic fluid power
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other rotary positive displacement pumps
Hydraulic units
For use in civil aircraft
Other
Other
Gear pumps
Hydraulic fluid power
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Vane pumps
Hydraulic fluid power
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Screw pumps
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other centrifugal pumps
Submersible pumps
Single-stage
Multi-stage
Glandless impeller pumps for heating systems and warm water supply
Other, with a discharge outlet diameter
Not exceeding 15|mm
For use in civil aircraft
Other
Single phase centrifugal pump: -|discharging at least 400|cm$3|fluid per minute -|with a noise level limited to 6|dBA, -|with the inside diameter of the|suction opening and discharge outlet of not more than 15|mm, and -|working at ambient temperatures down to -10°C
Other
Exceeding 15|mm
Channel impeller pumps and side channel pumps
For use in civil aircraft
Other
Radial flow pumps
Single-stage
With single entry impeller
Monobloc
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
With more than one entry impeller
For use in civil aircraft
Other
Multi-stage
For use in civil aircraft
Other
Other centrifugal pumps
Single-stage
For use in civil aircraft
Other
Multi-stage
For use in civil aircraft
Other
Other pumps; liquid elevators
Pumps
For use in civil aircraft
Other
Liquid elevators
Parts
Of pumps
For use in civil aircraft
Fuel pump cover: -|consisting of aluminum alloys, -|with a diameter of 38|mm or 50|mm, -|with two concentric, annular grooves formed on its surface, -|anodized, of a kind used in motor vehicles with petrol engines
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Other
Of liquid elevators
Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters
Vacuum pumps
For use in semiconductor production
Other
Rotary piston pumps, sliding vane rotary pumps, molecular drag pumps and Roots pumps
For use in civil aircraft
Of a kind used solely or principally for the manufacture of semiconductors or of flat panel displays
Other
Other
Diffusion pumps, cryopumps and adsorption pumps
For use in civil aircraft
Of a kind used solely or principally for the manufacture of semiconductors or of flat panel displays
Other
Other
For use in civil aircraft
Of a kind used solely or principally for the manufacture of semiconductors or of flat panel displays
Other
Hand- or foot-operated air pumps
Handpumps for cycles
Other
For use in civil aircraft
Other
Compressors of a kind used in refrigerating equipment
Of a power not exceeding 0,4|kW
For use in civil aircraft
Other
Of a power exceeding 0,4|kW
Hermetic or semi-hermetic
For use in civil aircraft
Other
Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5|kW or more but not more than|10|kW, with a displacement volume of not more than 35|cm$3, of the type used in refrigeration equipment
Hermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants:| | -|driven by 'on-off' single phase alternate current' (AC) or 'brushless direct current' (BLDC) variable speed motors| | -|with a nominal power rating of not more than 1,5|kW of a kind used in the production of household heat pump laundry tumble dryers
Other
Other
For use in civil aircraft
Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4|kW but not more than 10|kW
Other
Air compressors mounted on a wheeled chassis for towing
Giving a flow per minute not exceeding 2|m$3
Giving a flow per minute exceeding 2|m$3
Fans
Table, floor, wall, window, ceiling or roof fans, with a self-contained electric motor of an output not exceeding 125|W
For use in civil aircraft
Other
Other
Axial fans
For use in civil aircraft
Other
Axial fan: -|with an electric motor, -|of an output of not more than 125|W for use in the manufacture of computers
Axial fan with an electric motor, of an output of not more than 2|W, for use in the manufacture of products of heading 8521|or 8528
Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines
Other
Centrifugal fans
For use in civil aircraft
Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines
Other
Other
For use in civil aircraft
Other
Cross-flow fan, with; -|a height of 575|mm (± 1,0|mm) or more, but not more than 850|mm (±|1,0|mm), -|a diameter of 95mm (± 0,6|mm) or 102|mm (± 0,6|mm), -|an anti-static, anti-bacterial and heat-resistant, 30|% glass fibre reinforced plastic raw material that has a minimum temperature resistance of 70°C (±5°C),for use in the manufacture of indoor units of split-type air conditioning machines
Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines
Other
Hoods having a maximum horizontal side not exceeding 120|cm
Other
Turbo-compressors
Single-stage
For use in civil aircraft
Other
Multi-stage
For use in civil aircraft
Other
Reciprocating displacement compressors, having a gauge pressure capacity of
Not exceeding 15|bar, giving a flow per hour
Not exceeding 60|m$3
For use in civil aircraft
Other
Exceeding 60|m$3
For use in civil aircraft
Other
Exceeding 15|bar, giving a flow per hour
Not exceeding 120|m$3
For use in civil aircraft
Other
Exceeding 120|m$3
For use in civil aircraft
Other
Rotary displacement compressors
Single-shaft
For use in civil aircraft
Other
Hermetic rotary compressors for Hydro-Fluoro-Carbon (HFC) refrigerants:| | -|driven by 'on-off' single phase alternate current' (AC) or 'brushless direct current' (BLDC) variable speed motors| | -|with a nominal power rating of not more than 1,5|kW of a kind used in the production of household heat pump laundry tumble dryers
Other
Multi-shaft
Screw compressors
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Parts
For use in civil aircraft
Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles
Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles
Drive part, for compressors of air conditioning machines of motor vehicles
Cross-flow fan, with; -|a height of 575|mm (± 1,0|mm) or more, but not more than 850|mm (±|1,0|mm), -|a diameter of 95mm (± 0,6|mm) or 102|mm (± 0,6|mm), -|an anti-static, anti-bacterial and heat-resistant, 30|% glass fibre reinforced plastic raw material that has a minimum temperature resistance of 70°C (±5°C),for use in the manufacture of indoor units of split-type air conditioning machines
Other
Air-conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulated
Window or wall types, self-contained or 'split-system'
Self-contained
Split-system
Of a kind used for persons, in motor vehicles
Other
Incorporating a refrigerating unit and a valve for reversal of the cooling/heat cycle (reversible heat pumps)
For use in civil aircraft
Other
Other, incorporating a refrigerating unit
For use in civil aircraft
Other
Not incorporating a refrigerating unit
For use in civil aircraft
Other
Parts
Of air conditioning machines of subheading Nos 8415|81, 8415|82|or 8415|83, for use in civil aircraft
Evaporator made of aluminium for use in the manufacture of air conditioning machines for automobiles
Aluminium arc-welded removable receiver dryer with a connection block, containing polyamide and ceramic elements, with: -|a length of 166|mm (+/- 1|mm), -|a diameter of 70|mm (+/- 1|mm), -|an internal capacity of 280|cm$3|or more, -|a water absorption rate of 17|g or more, and -|an internal purity expressed by permissible amount of impurities of not more than 0,9|mg/dm$2 of a kind used in car air-conditioning systems
Flame-soldered aluminium block with extruded, bent connector lines, of a kind used in car air-conditioning systems
Aluminium arc-welded removable receiver dryer with polyamide and ceramic elements with: -|a length of 291|mm (+/- 1|mm), -|a diameter of 32|mm (+/- 1|mm), -|a spangle length of not more than 0,2|mm and a thickness of not more than 0,06|mm, -|a solid particle diameter of not more than 0,06|mm of a kind used in car air-conditioning systems
Other
Furnace burners for liquid fuel, for pulverised solid fuel or for gas; mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances
Furnace burners for liquid fuel
Incorporating an automatic control device
Other
Other furnace burners, including combination burners
Only for gas, monobloc, incorporating a ventilator and a control device
Other
Combination burners
Other
Mechanical stokers, including their mechanical grates, mechanical ash dischargers and similar appliances
Parts
Industrial or laboratory furnaces and ovens, including incinerators, non-electric
Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals
Bakery ovens, including biscuit ovens
Tunnel ovens
Other
Other
Ovens and furnaces for firing ceramic products
Ovens and furnaces for firing cement, glass or chemical products
Other
Parts
Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air-conditioning machines of heading|8415
Combined refrigerator-freezers, fitted with separate external doors
Of a capacity exceeding 340|litres
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Refrigerators, household type
Compression-type
Of a capacity exceeding 340|litres
Other
Table model
Building-in type
Other, of a capacity
Not exceeding 250|litres
Exceeding 250|litres but not exceeding 340|litres
Other
Freezers of the chest type, not exceeding 800|litres capacity
Of a capacity not exceeding 400|litres
For use in civil aircraft
Other
Of a capacity exceeding 400|litres but not exceeding 800|litres
For use in civil aircraft
Other
Freezers of the upright type, not exceeding 900|litres capacity
Of a capacity not exceeding 250|litres
For use in civil aircraft
Other
Of a capacity exceeding 250|litres but not exceeding 900|litres
For use in civil aircraft
Other
Other furniture (chests, cabinets, display counters, showcases and the like) for storage and display, incorporating refrigerating or freezing equipment
Refrigerated showcases and counters (incorporating a refrigerating unit or evaporator)
For frozen food storage
Other
Other refrigerating furniture
Other refrigerating or freezing equipment; heat pumps
Heat pumps other than air conditioning machines of heading|8415
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Parts
Furniture designed to receive refrigerating or freezing equipment
Other
Evaporators and condensers, excluding those for refrigerators of the household type
For use in certain types of aircraft
Other
Evaporator composed of aluminium fins and a copper coil of the kind used in refrigeration equipment
Condenser composed of two concentric copper tubes of the kind used in refrigeration equipment
Other
Other
Of refrigerating equipment adapted to the air-conditioning system, for use in certain types of aircraft
Other
Machinery, plant or laboratory equipment, whether or not electrically heated (excluding furnaces, ovens and other equipment of heading|8514), for the treatment of materials by a process involving a change of temperature such as heating, cooking, roasting, distilling, rectifying, sterilising, pasteurising, steaming, drying, evaporating, vaporising, condensing or cooling, other than machinery or plant of a kind used for domestic purposes; instantaneous or storage water heaters, non-electric
Instantaneous or storage water heaters, non-electric
Instantaneous gas water heaters
Other
Medical, surgical or laboratory sterilisers
Dryers
For agricultural products
For wood, paper pulp, paper or paperboard
Other
Distilling or rectifying plant
Heat-exchange units
For use in civil aircraft
Heat exchange units made of fluoropolymers and with inlet and outlet tube bores with inside diameters measuring 3 cm or less
Other
Machinery for liquefying air or other gases
Other machinery, plant and equipment
For making hot drinks or for cooking or heating food
Percolators and other appliances for making coffee and other hot drinks
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other
Cooling towers and similar plant for direct cooling (without a separating wall) by means of recirculated water
Vacuum-vapour plant for the deposition of metal
Other
Parts
Of sterilisers of subheading|8419|20|00
Other
Of heat exchange units, for use in civil aircraft
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Other
Calendering or other rolling machines, other than for metals or glass, and cylinders therefor
Calendering or other rolling machines
Of a kind used in the textile industry
Of a kind used in the paper industry
Other
Roll laminators of a kind used solely or principally for the manufacture of printed circuit substrates or printed circuits
Other
Parts
Cylinders
Of cast iron
Other
Other
Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases
Centrifuges, including centrifugal dryers
Cream separators
Clothes dryers
Other
Centrifuges of a kind used in laboratories
Other
For use in civil aircraft
Other
Filtering or purifying machinery and apparatus for liquids
For filtering or purifying water
For use in civil aircraft
Water pre-treatment system comprising one or more of the following elements, whether or not incorporating modules for sterilization and sanitization of these elements: -|ultrafiltration system -|carbon filtration system -|water softener system for use in a biopharmaceutical laboratory
Other
For filtering or purifying beverages other than water
Oil or petrol filters for internal combustion engines
For use in civil aircraft
Other
Other
For use in civil aircraft
Equipment for use in the manufacture of biopharmaceutical products comprising any of the following whether or not with associated vessels or tanks: -|Ultrafiltration-diafiltration unit; -|Automated control, testing and monitoring equipment for Clean in Process (CIP) and Sterilise in Place (SIP) activities; -|Process vessels and tanks
Made of fluoropolymers and with filter or purifier membrane thickness not exceeding 140 microns
Other
Filtering or purifying machinery and apparatus for gases
Intake air filters for internal combustion engines
For use in civil aircraft
Other
Other
Machinery and apparatus for filtering or purifying air
For use in civil aircraft
With stainless steel housing, and with inlet and outlet tube bores with inside diameters not exceeding 1,3 cm
Other
Machinery and apparatus for filtering or purifying other gases
By a catalytic process
For use in civil aircraft
With stainless steel housing, and with inlet and outlet tube bores with inside diameters not exceeding 1,3 cm
Other
Other
For use in civil aircraft
With stainless steel housing, and with inlet and outlet tube bores with inside diameters not exceeding 1,3 cm
Other
Parts
Of centrifuges, including centrifugal dryers
Other
Of filtering or purification machinery and apparatus for liquids or gases, for use in certain types of aircrafts
Other
Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder
Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4|mm, whether or not housed in a cylinder of a wall-thickness of 5|mm or more
Components of separators for the separation or purification of gases from gas mixtures, consisting of a bundle of permeable hollow fibres enclosed within a container, whether or not perforated, of an overall length of 300|mm or more but not more than 3|700|mm and a diameter of not more than 500|mm
Of liquid filtering or purifying machinery and apparatus made of fluoropolymers and with filter or purifier membrane thickness not exceeding 140 microns
Of filtering or purifying machinery and apparatus for gases, with stainless steel housing, and with inlet and outlet tube bores with inside diameters not exceeding 1,3 cm
Other
Dishwashing machines; machinery for cleaning or drying bottles or other containers; machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; other packing or wrapping machinery (including heat-shrink wrapping machinery); machinery for aerating beverages
Dishwashing machines
Of the household type
Other
Machinery for cleaning or drying bottles or other containers
Machinery for filling, closing, sealing or labelling bottles, cans, boxes, bags or other containers; machinery for capsuling bottles, jars, tubes and similar containers; machinery for aerating beverages
Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges
Other
Other packing or wrapping machinery (including heat-shrink wrapping machinery)
Parts
Of dishwashing machines
Other
Weighing machinery (excluding balances of a sensitivity of 5|cg or better), including weight-operated counting or checking machines; weighing machine weights of all kinds
Personal weighing machines, including baby scales; household scales
Household scales
Other
Scales for continuous weighing of goods on conveyors
Using electronic means for gauging weights
Other
Constant weight scales and scales for discharging a predetermined weight of material into a bag or container, including hopper scales
Using electronic means for gauging weight
Other
Other weighing machinery
Having a maximum weighing capacity not exceeding 30|kg
Check weighers and automatic control machines operating by reference to a pre-determined weight
Using electronic means for gauging weight
Other
Machinery for weighing and labelling pre-packaged goods
Using electronic means for gauging weight
Other
Shop scales
Using electronic means for gauging weight
Other
Other
Using electronic means for gauging weight
Other
Having a maximum weighing capacity exceeding 30|kg but not exceeding 5|000|kg
Check weighers and automatic control machines operating by reference to a pre-determined weight
Using electronic means for gauging weight, excluding machines for weighing motor vehicles
Other
Other
Using electronic means for gauging weight, excluding machines for weighing motor vehicles
Other
Other
Using electronic means for gauging weight
Other
Weighing machine weights of all kinds; parts of weighing machinery
Parts of weighing machinery using electronic means for gauging weight, excluding parts of machines for weighing motor vehicles
Other
Mechanical appliances (whether or not hand-operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sandblasting machines and similar jet projecting machines
Fire extinguishers, whether or not charged
For use in civil aircraft
Other
Spray guns and similar appliances
Steam or sandblasting machines and similar jet projecting machines
Water cleaning appliances, with built-in motor
With heating device
Other
Other machines
Compressed air operated
Other
Other appliances
Agricultural or horticultural
Watering appliances
Other
Portable appliances
Other
Sprayers and powder distributors designed to be mounted on or drawn by tractors
Other
Other
Mechanical appliances for projecting, dispersing, or spraying of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
Other
Parts
Of fire extinguishers, for use in certain types of aircraft
Containers of poly(ethylene terephthalate), with a content of 50|ml or more but not more than 600|ml, equipped with a nozzle, of a kind used as a part of mechanical appliances for spraying liquids
Parts of mechanical appliances for projecting, dispersing, or spraying of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
Other
Pulley tackle and hoists other than skip hoists; winches and capstans; jacks
Pulley tackle and hoists other than skip hoists or hoists of a kind used for raising vehicles
Powered by electric motor
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Winches; capstans
Powered by electric motor
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Jacks; hoists of a kind used for raising vehicles
Built-in jacking systems of a type used in garages
Other jacks and hoists, hydraulic
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Ships' derricks; cranes, including cable cranes; mobile lifting frames, straddle carriers and works trucks fitted with a crane
Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes, mobile lifting frames and straddle carriers
Overhead travelling cranes on fixed support
Mobile lifting frames on tyres and straddle carriers
Other
Tower cranes
Portal or pedestal jib cranes
Other machinery, self-propelled
On tyres
Other
Other machinery
Designed for mounting on road vehicles
Hydraulic cranes designed for the loading and unloading of the vehicle
Other
Other
For use in civil aircraft
Other
Fork-lift trucks; other works trucks fitted with lifting or handling equipment
Self-propelled trucks powered by an electric motor
With a lifting height of 1|m or more
Other
Other self-propelled trucks
With a lifting height of 1|m or more
Rough terrain fork-lift and other stacking trucks
Other
Other
Other trucks
Hand pallet trucks
Consigned from Thailand
Other
Hand pallet trucks with a so-called “weight indication system” consisting of a weighing mechanism not integrated in the chassis
Other
Other lifting, handling, loading or unloading machinery (for example, lifts, escalators, conveyors, teleferics)
Lifts and skip hoists
Electrically operated
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Pneumatic elevators and conveyors
For bulk materials
Other
For use in civil aircraft
Other
Other continuous-action elevators and conveyors, for goods or materials
Specially designed for underground use
Other, bucket type
Other, belt type
For use in civil aircraft
Other
Other
Roller conveyors
Other
For use in civil aircraft
Other
Escalators and moving walkways
Teleferics, chairlifts, ski-draglines; traction mechanisms for funiculars
Other machinery
Loaders specially designed for use in agriculture
Designed for attachment to agricultural tractors
Other
Other
For use in civil aircraft
Other
Self-propelled bulldozers, angledozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and roadrollers
Bulldozers and angledozers
Track laying
Other
Graders and levellers
Scrapers
Tamping machines and roadrollers
Roadrollers
Vibratory
Other
Tamping machines
Mechanical shovels, excavators and shovel loaders
Front-end shovel loaders
Loaders specially designed for underground use
Other
Crawler shovel loaders
Other
Machinery with a 360° revolving superstructure
Track-laying excavators
Other
Other
Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; piledrivers and pile extractors; snowploughs and snowblowers
Piledrivers and pile extractors
Snowploughs and snowblowers
Coal or rock cutters and tunnelling machinery
Self-propelled
Other
Other boring or sinking machinery
Self-propelled
Other
Other machinery, self-propelled
Other machinery, not self-propelled
Tamping or compacting machinery
Other
Parts suitable for use solely or principally with the machinery of headings|8425|to 8430
Of machinery of heading|8425
Of machinery of heading|8427
Chassis and hydraulics for hand pallet trucks
Consigned from Thailand
Other
Drive axle assembly containing differential, reduction gears, crown wheel, drive shafts, wheel hubs, brakes and mast mounting arms for use in the manufacture of vehicles in heading 8427
Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9|fins per 2,54|cm of core length for use in the manufacture of vehicles of heading 8427
Chassis and hydraulics, with a so-called ‘weight indication system’ consisting of a weighing mechanism not integrated in the chassis
Other
Of machinery of heading|8428
Of lifts, skip hoists or escalators
Other
Of machinery of heading|8426, 8429|or 8430
Buckets, shovels, grabs and grips
Bulldozer or angledozer blades
Parts for boring or sinking machinery of subheading|8430|41|or 8430|49
Other
Of cast iron or cast steel
Other
Agricultural, horticultural or forestry machinery for soil preparation or cultivation; lawn or sports-ground rollers
Ploughs
Harrows, scarifiers, cultivators, weeders and hoes
Disc harrows
Other
Scarifiers and cultivators
Harrows
Rotovators
Other
Seeders, planters and transplanters
Seeders
Central driven precision spacing seeders
Other
Planters and transplanters
Manure spreaders and fertiliser distributors
Mineral or chemical fertiliser distribution
Other
Other machinery
Parts
Harvesting or threshing machinery, including straw or fodder balers; grass or hay mowers; machines for cleaning, sorting or grading eggs, fruit or other agricultural produce, other than machinery of heading|8437
Mowers for lawns, parks or sports grounds
Powered, with the cutting device rotating in a horizontal plane
Electric
Other
Self-propelled
With a seat
Other
Other
Other
With motor
Electric
Other
Self-propelled
With a seat
Other
Other
Without motor
Other mowers, including cutter bars for tractor mounting
With motor
Other
Designed to be carried on or hauled by a tractor
Other
Other haymaking machinery
Straw or fodder balers, including pick-up balers
Other harvesting machinery; threshing machinery
Combine harvester-threshers
Other threshing machinery
Root or tuber harvesting machines
Potato diggers and potato harvesters
Beet-topping machines and beet harvesters
Other
Other
Forage harvesters
Self-propelled
Other
Other
Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce
Parts
Milking machines and dairy machinery
Milking machines
Dairy machinery
Parts
Presses, crushers and similar machinery used in the manufacture of wine, cider, fruit juices or similar beverages
Machinery
Parts
Other agricultural, horticultural, forestry, poultry-keeping or bee-keeping machinery, including germination plant fitted with mechanical or thermal equipment; poultry incubators and brooders
Machinery for preparing animal feedingstuffs
Poultry-keeping machinery; poultry incubators and brooders
Poultry incubators and brooders
Other
Other machinery
Forestry machinery
Other
Parts
Of poultry-keeping machinery or poultry incubators and brooders
Other
Part containing: -|a single-phase AC motor, -|an epicyclic gearing, -|a cutter blade and whether or not containing: -|a capacitor, -|a part fitted with a threaded bolt for use in the manufacture of garden shredders
Other
Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables; machinery used in the milling industry or for the working of cereals or dried leguminous vegetables, other than farm-type machinery
Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables
Other machinery
Parts
Machinery, not specified or included elsewhere in this chapter, for the industrial preparation or manufacture of food or drink, other than machinery for the extraction or preparation of animal or fixed vegetable fats or oils
Bakery machinery and machinery for the manufacture of macaroni, spaghetti or similar products
Bakery machinery
Machinery for the manufacture of macaroni, spaghetti or similar products
Machinery for the manufacture of confectionery, cocoa or chocolate
Machinery for sugar manufacture
Brewery machinery
Machinery for the preparation of meat or poultry
Machinery for the preparation of fruits, nuts or vegetables
Other machinery
For the preparation of tea or coffee
Other
For the preparation or manufacture of drink
Other
Parts
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Other
Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboard
Machinery for making pulp of fibrous cellulosic material
Machinery for making paper or paperboard
Machinery for finishing paper or paperboard
Parts
Of machinery for making pulp of fibrous cellulosic material
Other
Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3|000|mm or more and an external diameter of 550|mm or more
Other
Bookbinding machinery, including book-sewing machines
Machinery
Folding machines
Collating machines and gathering machines
Sewing, wire stitching and stapling machines
Unsewn (perfect) binding machines
Other
Parts
Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kinds
Cutting machines
Combined reel slitting and re-reeling machines
Other slitting and cross-cutting machines
Guillotines
Other
Machines for making bags, sacks or envelopes
Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by moulding
Machines for moulding articles in paper pulp, paper or paperboard
Other machinery
Parts
Of cutting machines
Other
Machinery, apparatus and equipment (other than the machine tools of headings|8456|to 8465) for preparing or making plates, cylinders or other printing components; plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished)
Machinery, apparatus and equipment
Phototypesetting and composing machines
Other
For typefounding and typesetting (for example, linotypes, monotypes, intertypes), with or without founding devices
Other
Parts of the foregoing machinery, apparatus or equipment
Plates, cylinders and other printing components; plates, cylinders and lithographic stones, prepared for printing purposes (for example, planed, grained or polished)
With printing image
Other
Printing machinery used for printing by means of plates, cylinders and other printing components of heading|8442; other printers, copying machines and facsimile machines, whether or not combined; parts and accessories thereof
Printing machinery used for printing by means of plates, cylinders and other printing components of heading|8442
Offset printing machinery, reel fed
Offset printing machinery, sheet fed, office type (using sheets with one side not exceeding 22|cm and the other side not exceeding 36|cm in the unfolded state)
Other offset printing machinery
Sheet fed
Used
New, taking sheets of a size
Not exceeding 52|!x!|74|cm
Exceeding 52|!x!|74|cm but not exceeding 74|!x!|107|cm
Exceeding 74|!x!|107|cm
Other
Letterpress printing machinery, reel fed, excluding flexographic printing
Letterpress printing machinery, other than reel fed, excluding flexographic printing
Flexographic printing machinery
Gravure printing machinery
Other
For printing textile materials
For use in the production of semiconductors
Other
Other printers, copying machines and facsimile machines, whether or not combined
Machines which perform two or more of the functions of printing, copying or facsimile transmission, capable of connecting to an automatic data-processing machine or to a network
Machines having digital copying as principal function, where the copying is performed by scanning the original and printing the copies by means of an electrostatic print engine
Other
Other, capable of connecting to an automatic data-processing machine or to a network
Printers
For use in civil aircraft
Other
Facsimile machines
Other
Machines performing a copying function by scanning the original and printing the copies by means of an electrostatic print engine
Other machines performing a copying function incorporating an optical system
Other
Other
Machines performing a copying function by scanning the original and printing the copies by means of an electrostatic print engine
Other copying machines
Incorporating an optical system
Other
Other
Parts and accessories
Parts and accessories of printing machinery used for printing by means of plates, cylinders and other printing components of heading|8442
Of apparatus of subheading|8443|19|40
Other
Of cast iron or cast steel
Other
Other
Electronic assemblies
Other
Machines for extruding, drawing, texturing or cutting man-made textile materials
Machines for extruding
Other
Machines for preparing textile fibres; spinning, doubling or twisting machines and other machinery for producing textile yarns; textile reeling or winding (including weft-winding) machines and machines for preparing textile yarns for use on the machines of heading|8446|or 8447
Machines for preparing textile fibres
Carding machines
Combing machines
Drawing or roving machines
Other
Textile spinning machines
Textile doubling or twisting machines
Textile winding (including weft-winding) or reeling machines
Other
Weaving machines (looms)
For weaving fabrics of a width not exceeding 30|cm
For weaving fabrics of a width exceeding 30|cm, shuttle type
Power looms
Other
For weaving fabrics of a width exceeding 30|cm, shuttleless type
Knitting machines, stitch-bonding machines and machines for making gimped yarn, tulle, lace, embroidery, trimmings, braid or net and machines for tufting
Circular knitting machines
With cylinder diameter not exceeding 165|mm
With cylinder diameter exceeding 165|mm
Flat knitting machines; stitch-bonding machines
Warp knitting machines (including Raschel type); stitch-bonding machines
Other
Other
Auxiliary machinery for use with machines of heading|8444, 8445, 8446|or 8447|(for example, dobbies, jacquards, automatic stop motions, shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of this heading or of heading|8444, 8445, 8446|or 8447|(for example, spindles and spindle flyers, card clothing, combs, extruding nipples, shuttles, healds and heald-frames, hosiery needles)
Auxiliary machinery for machines of heading|8444, 8445, 8446|or 8447
Dobbies and jacquards; card-reducing, copying, punching or assembling machines for use therewith
Other
Parts and accessories of machines of heading|8444|or of their auxiliary machinery
Parts and accessories of machines of heading|8445|or of their auxiliary machinery
Card clothing
Of machines for preparing textile fibres, other than card clothing
Spindles, spindle flyers, spinning rings and ring travellers
Other
Parts and accessories of weaving machines (looms) or of their auxiliary machinery
Reeds for looms, healds and heald-frames
Other
Parts and accessories of machines of heading|8447|or of their auxiliary machinery
Sinkers, needles and other articles used in forming stitches
Sinkers
Other
Other
Machinery for the manufacture or finishing of felt or nonwovens in the piece or in shapes, including machinery for making felt hats; blocks for making hats
Household or laundry-type washing machines, including machines which both wash and dry
Machines, each of a dry linen capacity not exceeding 10|kg
Fully-automatic machines
Each of a dry linen capacity not exceeding 6|kg
Front-loading machines
Top-loading machines
Each of a dry linen capacity exceeding 6|kg but not exceeding 10|kg
Other machines, with built-in centrifugal drier
Other
Machines, each of a dry linen capacity exceeding 10|kg
Parts
Machinery (other than machines of heading|8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made-up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics
Dry-cleaning machines
Drying machines
Each of a dry linen capacity not exceeding 10|kg
Other
Ironing machines and presses (including fusing presses)
Washing, bleaching or dyeing machines
Machines for reeling, unreeling, folding, cutting or pinking textile fabrics
Other machinery
Machines used in the manufacture of linoleum or other floor coverings for applying the paste to the base fabric or other support
Machines for dressing or finishing
Other
Parts
Sewing machines, other than book-sewing machines of heading|8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles
Sewing machines of the household type
Sewing machines (lock-stitch only), with heads of a weight not exceeding 16|kg without motor or 17|kg including the motor; sewing machine heads (lock-stitch only), of a weight not exceeding 16|kg without motor or 17|kg including the motor
Sewing machines having a value (not including frames, tables or furniture) of more than €|65|each
Other
Other sewing machines and other sewing machine heads
Other sewing machines
Automatic units
Other
Sewing machine needles
Furniture, bases and covers for sewing machines and parts thereof; other parts of sewing machines
Machinery for preparing, tanning or working hides, skins or leather or for making or repairing footwear or other articles of hides, skins or leather, other than sewing machines
Machinery for preparing, tanning or working hides, skins or leather
Machinery for making or repairing footwear
Other machinery
Parts
Converters, ladles, ingot moulds and casting machines, of a kind used in metallurgy or in metal foundries
Converters
Ingot moulds and ladles
Casting machines
For casting under pressure
Other
Parts
Metal-rolling mills and rolls therefor
Tube mills
Other rolling mills
Hot or combination hot and cold
Cold
Rolls for rolling mills
Of cast iron
Of open-die forged steel
Hot-rolling work-rolls; hot-rolling and cold-rolling back-up rolls
Cold-rolling work-rolls
Other
Other parts
Machine tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic, electrodischarge, electrochemical, electron beam, ionic-beam or plasma arc processes; water-jet cutting machines
Operated by laser or other light or photon beam processes
Machine tools operated by laser or other light or photon beam processes of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines
Other
Operated by ultrasonic processes
Operated by electrodischarge processes
Numerically controlled
Wire-cut
Other
Other
Other
Water-jet cutting machines
Other
Machining centres, unit construction machines (single station) and multi-station transfer machines, for working metal
Machining centres
Horizontal
Other
Unit construction machines (single station)
Multi-station transfer machines
Numerically controlled
Other
Lathes (including turning centres) for removing metal
Horizontal lathes
Numerically controlled
Turning centres
Automatic lathes
Single spindle
Multi-spindle
Other
Other
Other lathes
Numerically controlled
Turning centres
Other
Other
Machine tools (including way-type unit head machines) for drilling, boring, milling, threading or tapping by removing metal, other than lathes (including turning centres) of heading|8458
Way-type unit head machines
Other drilling machines
Numerically controlled
Other
Other boring-milling machines
Numerically controlled
Other
Other boring machines
Numerically controlled
Other
Milling machines, knee-type
Numerically controlled
Other
Other milling machines
Numerically controlled
Tool milling machines
Other
Other
Tool milling machines
Other
Other threading or tapping machines
Machine tools for deburring, sharpening, grinding, honing, lapping, polishing or otherwise finishing metal or cermets by means of grinding stones, abrasives or polishing products, other than gear cutting, gear grinding or gear finishing machines of heading|8461
Flat-surface grinding machines, in which the positioning in any one axis can be set up to an accuracy of at least 0,01|mm
Numerically controlled
Other
Other grinding machines, in which the positioning in any one axis can be set up to an accuracy of at least 0,01|mm
Numerically controlled
For cylindrical surfaces
Internal cylindrical grinding machines
Centreless grinding machines
Other
Other
Other
For cylindrical surfaces
Other
Sharpening (tool or cutter grinding) machines
Numerically controlled
Other
Honing or lapping machines
Numerically controlled
Other
Other
Fitted with a micrometric adjusting system, in which the positioning in any one axis can be set up to an accuracy of at least 0,01|mm
Other
Machine tools for planing, shaping, slotting, broaching, gear cutting, gear grinding or gear finishing, sawing, cutting-off and other machine tools working by removing metal or cermets, not elsewhere specified or included
Shaping or slotting machines
Broaching machines
Numerically controlled
Other
Gear-cutting, gear-grinding or gear-finishing machines
Gear-cutting machines (including abrasive gear-cutting machines)
For cutting cylindrical gears
Numerically controlled
Other
For cutting other gears
Numerically controlled
Other
Gear-finishing machines
Fitted with a micrometric adjusting system, in which the positioning in any one axis can be set up to an accuracy of at least 0,01|mm
Numerically controlled
Other
Other
Sawing or cutting-off machines
Sawing machines
Circular saws
Other
Cutting-off machines
Other
Machine tools (including presses) for working metal by forging, hammering or die-stamping; machine tools (including presses) for working metal by bending, folding, straightening, flattening, shearing, punching or notching; presses for working metal or metal carbides, not specified above
Forging or die-stamping machines (including presses) and hammers
Numerically controlled
Other
Bending, folding, straightening or flattening machines (including presses)
Numerically controlled
For working flat products
Other
Other
For working flat products
Other
Hydraulic
Other
Shearing machines (including presses), other than combined punching and shearing machines
Numerically controlled
Other
For working flat products
Other
Hydraulic
Other
Punching or notching machines (including presses), including combined punching and shearing machines
Numerically controlled
For working flat products
Other
Other
For working flat products
Other
Other
Hydraulic presses
Numerically controlled
Other
Other
Numerically controlled
Other
Other machine tools for working metal or cermets, without removing material
Drawbenches for bars, tubes, profiles, wire or the like
Drawbenches for wire
Other
Thread-rolling machines
Machines for working wire
Other
Machine tools for working stone, ceramics, concrete, asbestos-cement or like mineral materials or for cold working glass
Sawing machines
Grinding or polishing machines
For working glass
Optical glass
Other
Other
Other
Machine tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials
Machines which can carry out different types of machining operations without tool change between such operations
With manual transfer of workpiece between each operation
With automatic transfer of workpiece between each operation
Other
Sawing machines
Bandsaws
Circular saws
Other
Planing, milling or moulding (by cutting) machines
Grinding, sanding or polishing machines
Bending or assembling machines
Drilling or morticing machines
Splitting, slicing or paring machines
Other
Parts and accessories suitable for use solely or principally with the machines of headings|8456|to 8465, including work or tool holders, self-opening dieheads, dividing heads and other special attachments for machine tools; tool holders for any type of tool for working in the hand
Tool holders and self-opening dieheads
Tool holders
Arbors, collets and sleeves
Other
For lathes
Other
Self-opening dieheads
Work holders
Jigs and fixtures for specific applications; sets of standard jig and fixture components
Other
For lathes
Other
Dividing heads and other special attachments for machine tools
Other
For machines of heading|8464
Of cast iron or cast steel
Other
For machines of heading|8465
Of cast iron or cast steel
Other
For machines of headings|8456|to 8461
For machines of subheading|8456|90|20
Other
Parts and accessories of machine tools operated by laser or other light or photon beam processes of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines; Parts and accessories of machines of subheadings 8456 20, 8456 30, 8457 10, 8458 91, 8459 21 00, 8459 61 or 8461 50 of a kind used solely or principally for the manufacture of printed circuits, printed circuit assemblies, parts of heading 8517, or parts of automatic data processing machines
Other
For machines of heading|8462|or 8463
Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor
Pneumatic
Rotary type (including combined rotary-percussion)
Metalworking
Other
Other
With self-contained electric motor
Drills of all kinds
Capable of operation without an external source of power
Other
Electropneumatic
Other
Saws
Chainsaws
Circular saws
Other
Other
Capable of operation without an external source of power
Other
Grinders and sanders
Angle grinders
Belt sanders
Other
Planers
Hedge trimmers and lawn edge cutters
Other
Other tools
Chainsaws
Other
Parts
Of chainsaws
Of pneumatic tools
Other
Mechanical switches for connecting electrical circuits, with: -|a voltage of 14,4|V or more but not more than 42|V, -|an amperage of 10|A or more but not more than 42|A, for use in the manufacture of machines falling within heading 8467
Other
Machinery and apparatus for soldering, brazing or welding, whether or not capable of cutting, other than those of heading|8515; gas-operated surface tempering machines and appliances
Hand-held blow pipes
Other gas-operated machinery and apparatus
Other machinery and apparatus
Parts
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Other
Typewriters other than printers of heading|8443; word-processing machines
Word-processing machines
Other
Electric
Other
Calculating machines and pocket-size data-recording, reproducing and displaying machines with calculating functions; accounting machines, postage-franking machines, ticket-issuing machines and similar machines, incorporating a calculating device; cash registers
Electronic calculators capable of operation without an external source of electric power and pocket-size data-recording, reproducing and displaying machines with calculating functions
Other electronic calculating machines
Incorporating a printing device
Other
Other calculating machines
Cash registers
Other
Automatic data-processing machines and units thereof; magnetic or optical readers, machines for transcribing data onto data media in coded form and machines for processing such data, not elsewhere specified or included
Portable automatic data-processing machines, weighing not more than 10|kg, consisting of at least a central processing unit, a keyboard and a display
Other automatic data-processing machines
Comprising in the same housing at least a central processing unit and an input and output unit, whether or not combined
For use in civil aircraft
Other
Other, presented in the form of systems
For use in civil aircraft
Other
Processing units other than those of subheading|8471|41|or 8471|49, whether or not containing in the same housing one or two of the following types of unit: storage units, input units, output units
For use in civil aircraft
Other
Input or output units, whether or not containing storage units in the same housing
Keyboards
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Storage units
Central storage units
For use in civil aircraft
Other
Other
Disk storage units
Optical, including magneto-optical
For use in civil aircraft
Other
Other
Hard disk drives
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Magnetic tape storage units
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other units of automatic data-processing machines
Other
Other office machines (for example, hectograph or stencil duplicating machines, addressing machines, automatic banknote dispensers, coin-sorting machines, coin-counting or -wrapping machines, pencil-sharpening machines, perforating or stapling machines)
Duplicating machines
Machines for sorting or folding mail or for inserting mail in envelopes or bands, machines for opening, closing or sealing mail and machines for affixing or cancelling postage stamps
Other
Coin-sorting, coin-counting or coin-wrapping machines
Automatic teller machines
Other
Parts and accessories (other than covers, carrying cases and the like) suitable for use solely or principally with machines of headings|8469|to 8472
Parts and accessories of the machines of heading|8469
Electronic assemblies
Of machines of subheading|8469|00|10
Other
Other
Parts and accessories of the machines of heading|8470
Of the electronic calculating machines of subheading|8470|10, 8470|21|or 8470|29
Electronic assemblies
Other
Other
Electronic assemblies
Other
Parts and accessories of the machines of heading|8471
Electronic assemblies
Other
Parts and accessories of the machines of heading|8472
Electronic assemblies
Of machines of subheading|8472|90|30
Other
Other
Parts and accessories equally suitable for use with machines of two or more of the headings|8469|to 8472
Electronic assemblies
Other
Machinery for sorting, screening, separating, washing, crushing, grinding, mixing or kneading earth, stone, ores or other mineral substances, in solid (including powder or paste) form; machinery for agglomerating, shaping or moulding solid mineral fuels, ceramic paste, unhardened cements, plastering materials or other mineral products in powder or paste form; machines for forming foundry moulds of sand
Sorting, screening, separating or washing machines
Crushing or grinding machines
Mixing or kneading machines
Concrete or mortar mixers
Machines for mixing mineral substances with bitumen
Other
Other machinery
Machinery for agglomerating, shaping or moulding ceramic paste
Other
Parts
Of cast iron or cast steel
Other
Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes; machines for manufacturing or hot working glass or glassware
Machines for assembling electric or electronic lamps, tubes or valves or flashbulbs, in glass envelopes
Machines for manufacturing or hot working glass or glassware
Machines for making optical fibres and preforms thereof
Other
Glass Filament Melter with heater basket/bushing assembly: -|electrically heated, -|with opening -|with a multiplicity of tips (holes) of platinum/rhodium alloy -|used to melt glass batches and condition molten glass -|for drawing into continuous fibres
Other
Parts
Parts of machines of subheading 8475 21 00
Other
Automatic goods-vending machines (for example, postage stamp, cigarette, food or beverage machines), including money-changing machines
Automatic beverage-vending machines
Incorporating heating or refrigerating devices
Other
Other machines
Incorporating heating or refrigerating devices
Other
Money-changing machines
Other
Parts
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Parts of money-changing machines
Other
Machinery for working rubber or plastics or for the manufacture of products from these materials, not specified or included elsewhere in this chapter
Injection-moulding machines
Extruders
Blow-moulding machines
Vacuum-moulding machines and other thermoforming machines
Other machinery for moulding or otherwise forming
For moulding or retreading pneumatic tyres or for moulding or otherwise forming inner tubes
Other
Presses
Other
Other machinery
Machines for the manufacture of foam products
Machines for processing reactive resins
Other
Other
Size reduction equipment
Mixers, kneaders and agitators
Cutting, splitting and peeling machines
Other
Machines for casting or for surface modification of plastic membranes of heading|3921
Other
Parts
Of cast iron or cast steel
Other
Machinery for preparing or making up tobacco, not specified or included elsewhere in this chapter
Machinery
Parts
Machines and mechanical appliances having individual functions, not specified or included elsewhere in this chapter
Machinery for public works, building or the like
Machinery for the extraction or preparation of animal or fixed vegetable fats or oils
Presses for the manufacture of particle board or fibre building board of wood or other ligneous materials and other machinery for treating wood or cork
Presses
Other
Rope- or cable-making machines
Industrial robots, not elsewhere specified or included
Evaporative air coolers
Passenger boarding bridges
Of a kind used in airports
Other
Other machines and mechanical appliances
For treating metal, including electric wire coil-winders
Mixing, kneading, crushing, grinding, screening, sifting, homogenising, emulsifying or stirring machines
Equipment for use in the manufacture of biopharmaceutical products comprising any of the following whether or not with associated vessels or tanks: -|Ultrafiltration-diafiltration unit; -|Automated control, testing and monitoring equipment for Clean in Process (CIP) and Sterilise in Place (SIP) activities; -|Process vessels and tanks
Other
Other
Mobile hydraulic-powered mine roof supports
Central greasing systems
Other
The following goods, for use in civil aircraft :!1!Hydropneumatic batteries;!1!Mechanical actuators for thrust reversers;!1!Toilet units specially designed;!1!Air humidifiers and dehumidifiers;!1!Servo-mechanisms, non-electric;!1!Non-electric starter motors;!1!Pneumatic starters for turbo-jets, turbo-jets, turbo-propellers and other gas turbines;!1!Windscreen wipers, non-electric;!1!Propeller regulators, non-electric!1!
Bioreactor for biopharmaceutical cell culture -|having interior surfaces of type 316L austenitic stainless steel -|with a process capacity of 50|litres, 500|litres, 3,000|litres, 5,000|litres, 10,000|litres or 15,000|litres -|whether or not combined with a "clean-in-process" system and/or a dedicated paired media hold vessel
Automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies
Machines and apparatus, other than injection moulding machines, for the manufacture of ink-jet printer cartridges
Machinery, being components of a production line for the manufacture of lithium ion batteries for passenger electric motor vehicles, for the construction of such a production line
Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a|two part cure epoxy
Equipment for use in the manufacture of biopharmaceutical products comprising any of the following whether or not with associated vessels or tanks: -|Ultrafiltration-diafiltration unit; -|Automated control, testing and monitoring equipment for Clean in Process (CIP) and Sterilise in Place (SIP) activities; -|Process vessels and tanks
Machinery for the production of a sub assembled component (anode conductor and the negative closing cap) for the manufacture of AA and/or AAA alkaline batteries
High Pressure Hard Materials Compression Press ("Link Press"): -|with a 16|000|tonne pressure rating, -|with a 1|100mm diameter Bolster (± 1mm), -|with a 1|400mm main cylinder (± 1mm), -|with a Fixed and floating link frame, multiple pump high pressure hydraulic accumulator and pressure system, -|with a double arm manipulator arrangement and connections for piping and electrical systems, -|with a total weight 310|tonnes (± 10|tonnes), and -|creating 30|000|atmospheres at 1|500|degrees centigrade using Low Frequency Alternating Current (16|000|amps)
Other
Parts
Of cast iron or cast steel
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Machinery, being components of a production line for the manufacture of lithium ion batteries for passenger electric motor vehicles, for the construction of such a production line
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Injectors with solenoid valve for optimised atomisation in the engine combustion chamber
Parts of automated electronic component placement machines of a kind used solely or principally for the manufacture of printed circuit assemblies
Other
Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plastics
Moulding boxes for metal foundry
Mould bases
Moulding patterns
Of wood
Other
Moulds for metal or metal carbides
Injection or compression types
Other
Moulds for glass
Moulds for mineral materials
Moulds for rubber or plastics
Injection or compression types
Other
Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves
Pressure-reducing valves
Combined with filters or lubricators
For use in certain types of aircraft
Other
Other
Of cast iron or steel
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Valves for oleohydraulic or pneumatic transmissions
Valves for the control of oleohydraulic power transmission
for use in certain types of aircraft
Other
Valves for the control of pneumatic power transmission
for use in certain types of aircraft
Other
Check (non-return) valves
Of cast iron or steel
for use in certain types of aircraft
Other
Steel check (non-return) valves with: -|an opening pressure of not more than 800|kPa -|an external diameter not more than 37|mm
Other
Other
for use in certain types of aircraft
Other
Safety or relief valves
Of cast iron or steel
for use in certain types of aircraft
Other
Other
for use in certain types of aircraft
Other
Other appliances
Taps, cocks and valves for sinks, washbasins, bidets, water cisterns, baths and similar fixtures
Mixing valves
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Central heating radiator valves
Thermostatic valves
Other
Valves for pneumatic tyres and inner tubes
For use in certain types of aircraft
Other
Other
Process control valves
Temperature regulators
Other
Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines
Other
Other
Gate valves
Of cast iron
Of steel
for use in certain types of aircraft
Other
Other
for use in certain types of aircraft
Other
Four-way reversing valve for refrigerants, consisting of: -|a solenoid pilot valve -|a brass valve body including valve slider and copper connections with a working pressure up to 4,5|MPa
Other
Globe valves
Of cast iron
Of steel
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Solenoid valve device that can withstand a pressure of 875|bar
Other
Ball and plug valves
for use in certain types of aircraft
Other
Butterfly valves
for use in certain types of aircraft
Other
Diaphragm valves
for use in certain types of aircraft
Other
Other
for use in certain types of aircraft
Service valve, consisting a combination of a two way valve on the liquid line and a three way valve on the gas line with: -|a minimum enclosing pressure of 30|kgf/cm$2, -|a minimum withstanding pressure of 45|kgf/cm$2, for use in the manufacture of outdoor air conditioning units
Four way valve, consisting of: -|a core plunger, -|a sealing plunger, -|a 220|V-240|V AC 50/60|Hz solenoid coil, -|a working pressure up to 4.3|Mpa, -|a housing for directing the flow of the refrigerant, for use in the manufacture of outdoor air conditioning units
Other
Parts
For use in certain types of aircraft
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Other
Ball or roller bearings
Ball bearings
With greatest external diameter not exceeding 30|mm
Ball and cylindrical bearings: -|with an outside diameter of 28|mm or more but not more than 140|mm, -|with an operational thermal stress of more than 150°C at a working pressure of not more than 14|MPa, for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants
Ball bearings: -|with an internal diameter of 3|mm or more, -|with an external diameter of not more than 100|mm, -|with a width of not more than 40|mm, -|whether or not equipped with a duster, for use in the manufacture of belt drive steering systems of motor, electric power steering systems or steering gears
Other
Other
Ball and cylindrical bearings: -|with an outside diameter of 28|mm or more but not more than 140|mm, -|with an operational thermal stress of more than 150°C at a working pressure of not more than 14|MPa, for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants
Ball bearings: -|with an internal diameter of 3|mm or more, -|with an external diameter of not more than 100|mm, -|with a width of not more than 40|mm, -|whether or not equipped with a duster, for use in the manufacture of belt drive steering systems of motor, electric power steering systems or steering gears
Other
Tapered roller bearings, including cone and tapered roller assemblies
Spherical roller bearings
Needle roller bearings
Other cylindrical roller bearings
Ball and cylindrical bearings: -|with an outside diameter of 28|mm or more but not more than 140|mm, -|with an operational thermal stress of more than 150°C at a working pressure of not more than 14|MPa, for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants
Other
Other, including combined ball/roller bearings
Connecting components for use in the production of helicopter tail rotor shafts
Other
Parts
Balls, needles and rollers
Tapered rollers
Other
Other
Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)
Transmission shafts (including cam shafts and crank shafts) and cranks
Cranks and crank shafts
Of cast iron or cast steel
For use in civil aircraft
Other
Of open-die forged steel
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Articulated shafts
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Bearing housings, incorporating ball or roller bearings
Bearing housings, not incorporating ball or roller bearings; plain shaft bearings
Bearing housings
For ball or roller bearings
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Cylindrical bearing housing: -|of precision-cast grey cast iron complying with standard DIN EN 1561, -|with oil chambers, -|without bearings, -|with a diameter of|50|mm or more, but not more than|250|mm, -|with a height of|40|mm or more, but not more than 150|mm, -|whether or not with water chambers and connectors
Other
Plain shaft bearings
For use in civil aircraft
Wave slide bearing for axial applications, of FeP01 steel (according to EN 10130-1991) with a sliding layer of porous sinter bronze and poly(tetrafluoroethylene), suitable for installation into motor bike suspension units
Other
Gears and gearing, other than toothed wheels, chain sprockets and other transmission elements presented separately; ball or roller screws; gear boxes and other speed changers, including torque converters
Gears and gearing (other than friction gears)
Spur and helical
For use in civil aircraft
Other
Bevel and bevel/spur
For use in civil aircraft
Other
Worm gear
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Gear set of cycloid gear type with: -|a rated torque of 50|Nm or more but not more than 7|000|Nm, -|standard ratios of 1:50|or more but not more than 1:270, -|lost motion of|not more than one arc minute, -|an efficiency of more than 80|%, of a kind used in robot arms
Epicyclic gearing, of a kind used in driving hand-held power tools with: -|a rated torque of 25|Nm or more, but not more than 70|Nm, -|standard gear ratios of 1:12.7|or more, but not more than 1:64.3
Other
Ball or roller screws
For use in civil aircraft
Other
Gear boxes and other speed changers
Gear boxes
For use in civil aircraft
Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433|11|51
Other
Other
For use in civil aircraft
Hydrostatic speed changer, having a hydro pump and a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433|11|51
Other
Other
For use in civil aircraft
Other
Transmission gearbox, with: -|not more than 3|gears, -|an automatic deceleration system and -|a power reversal system, for use in the manufacture of goods of heading 8427
Other
Flywheels and pulleys, including pulley blocks
Of cast iron or cast steel
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Clutches and shaft couplings (including universal joints)
Of cast iron or cast steel
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Toothed wheels, chain sprockets and other transmission elements presented separately; parts
Parts of bearing housings
For use in civil aircraft
Other
Other
Of cast iron or cast steel
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical seals
Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal
For use in civil aircraft
Other
Mechanical seals
Other
For use in civil aircraft
Other
Machines and apparatus of a kind used solely or principally for the manufacture of semiconductor boules or wafers, semiconductor devices, electronic integrated circuits or flat panel displays; machines and apparatus specified in note|9(C) to this chapter; parts and accessories
Machines and apparatus for the manufacture of boules or wafers
Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits
Machine-tools operated by ultrasonic processes
Other
Machines and apparatus for the manufacture of flat panel displays
Apparatus for chemical vapour deposition on liquid crystal devices (LCD) substrates
Apparatus for dry-etching patterns on liquid crystal devices (LCD) substrates
Apparatus for physical deposition by sputtering on liquid crystal devices (LCD) substrates
Other
Machines and apparatus specified in note|9(C) to this chapter
Parts and accessories
Tool holders and self-opening dieheads; workholders
Other
Parts of spinners for coating photographic emulsions on liquid crystal devices (LCD) substrates
Parts of deflash machines for cleaning the metal leads of semiconductor packages prior to the electroplating process
Parts of apparatus for physical deposition by sputtering on liquid crystal devices (LCD) substrates
Parts and accessories for apparatus for dry-etching patterns on liquid crystal devices (LCD) substrates
Parts and accessories for apparatus for chemical vapour deposition on liquid crystal devices (LCD) substrates
Parts and accessories for machine-tools operated by ultrasonic processes
Other
Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, not specified or included elsewhere in this chapter
Ships' or boats' propellers and blades therefor
Of bronze
Other
Other
Of cast iron
For use in certain types of aircraft
Other
Of iron or steel
Of cast steel
For use in certain types of aircraft
Other
Of open-die forged or closed-die forged iron or steel
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
ELECTRICAL MACHINERY AND EQUIPMENT AND PARTS THEREOF; SOUND RECORDERS AND REPRODUCERS, TELEVISION IMAGE AND SOUND RECORDERS AND REPRODUCERS, AND PARTS AND ACCESSORIES OF SUCH ARTICLES
Electric motors and generators (excluding generating sets)
Motors of an output not exceeding 37,5|W
Synchronous motors of an output not exceeding 18|W
For use in certain types of aircraft
Synchronous motor for a dishwasher with a water flow control mechanism with -|a length without axle of 24|mm (+/- 0,3), -|a diameter of 49,3|mm (+/- 0,3) -|a rated voltage of 220|V AC or more but not more than 240|V AC, -|a rated frequency of 50|Hz or more but not more than 60|Hz, -|an input power of not more than 4|W, -|a rotation speed of 4rpm or more but not more than 4,8rpm, -|an output torque of not more than 10kgf/cm
Other
Other
Universal AC/DC motors
For use in certain types of aircraft
Other
AC motors
For use in certain types of aircraft
Other
DC motors
For use in certain types of aircraft
Other
DC motor, brushless, with an external diameter of not more than 25,4|mm, a rated speed of 2|260|(±15|%) rpm or 5|420|(±15|%) rpm, a supply voltage of 1,5|V or 3|V
Electric turbocharger |actuator, with: -|a DC motor with an output of 10W or more but not more than |15W, -|an integrated gear mechanism, -|a (pulling)force of |250N or more at 160°C elevated ambient temperature, -|a (pulling) force of 250N or more in each position of its stroke, -|an effective stroke of 15mm or more but not more than 20|mm, -|with or without an on-board diagnostics interface
DC motor: -|with a rotor speed of not more than 6|500|rpm when not loaded; -|with a rated voltage of 12,0|V (+/- 0,1); -|of a specified temperature range of |- 40|°C or more, but not more than + 165|°C; -|with or without a connecting pinion; -|with or without an engine connector
DC motor -|with a rotor speed of 3|500|rpm or more but not more than 5|000|rpm loaded and not more than 6|500|rpm when not loaded -|with a power supply voltage of 100|V or more but not more than 240|V for use in the manufacture of electric fryers
DC stepping motor, with -|an angle of step of 7,5|° (± 0,5|°) -|a two-phase winding,| -|a rated voltage of 9|V or more, but not more than 16,0|V -|of a specified temperature range covering at least|- 40|°C to +|105|°C -|with or without connecting pinion -|with or without motor drive connector
Permanently excited DC motor with -|a multiple-phase winding -|an external diameter of 28|mm or more but not more than 35|mm, -|a rated speed of not more than 12|000|rpm, -|a power supply voltage of 8|V or more but not more than 27|V
DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least - 20°C to + 70°C
DC stepping motor,|with: -|an angle of step of 7,5° (± 0,5°), -|a pull-out torque at 25|°C of 25|mNm or more, -|a pull-out pulse rate of 1|500|pps or more, -|a two-phase winding, and -|a rated voltage of 10,5|V or more, but not more than 16,0|V
DC stepping motor, with an angle of step of 18|° or more, a holding torque of 0,5|mNm or more, a coupling bracket the exterior dimensions of which do not exceed 22|mm|!x!|68|mm, a two phase winding and an output of not more than 5|W
DC motor, brushless, with an external diameter of not more than 29|mm, a rated speed of 1|500|(±15|%) rpm or 6|800|(±15|%) rpm, a supply voltage of 2|V or 8|V
Other
Universal AC/DC motors of an output exceeding 37,5|W
Of an output exceeding|735|W but not exceeding|150|kW, for use in civil aircraft
Of an output of less than 750|W or exceeding 150|kW, for use in certain types of aircraft
Other
Other DC motors; DC generators
Of an output not exceeding 750|W
Motors of an output exceeding|735|W, DC generators, for use in civil aircraft
for use in certain types of aircraft
DC motors, brushless, with: -|an external diameter of 80|mm or more, but not more than 100|mm, -|a supply voltage of 12|V, -|an output at 20|°C of 300|W or more, but not more than 750|W, -|a torque 20|°C of 2,00|Nm or more, but not more than 7,00|Nm, -|a rated speed at 20|°C of 600|rpm or more, but not more than 3|100|rpm, -|with or without the rotor angle position sensor of resolver type or Hall effect type, of the kind used in power steering systems for cars
DC motor, brushless, with a three-phase winding, an external diameter of 85|mm or more, but not exceeding 115|mm, a nominal torque of 2.23|Nm (±|1.0|Nm), of an output of more than 120|W but not exceeding 520|W, calculated with 1550|RPM (±|350|RPM) at a supply voltage of 12|V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor)
Automotive-ready, brushless and permanently excited direct current motor with: -|a specified speed of not more than 4|000|rpm, -|a minimum output of 400|W, but not more than 1,3|kW (at 12V), -|a flange diameter of 90|mm or more, but not more than 150|mm, -|a maximum length of 190|mm, measured from the beginning of the shaft to the outer ending, -|a housing length of not more than 150|mm, measured from the flange to the outer ending, -|a two-piece (basic housing including electric components and flange with minimum 2|and maximum 6|bore holes) aluminium diecast housing with a sealing compound (groove with an O-ring and grease), -|a stator with single T-tooth design and single coil windings in 12/8|topology and -|surface magnets
Permanently excited DC motor with -|a multiple-phase winding, -|an external diameter of 30|mm or more but not more than|80|mm, -|a rated speed of not more than 15|000|rpm, -|an output of 45|W or more but not more than 300|W and -|a supply voltage of 9|V or more but not more than 25|V
DC motors, brushless, with: -|an external diameter of 90|mm or more, but not more than 110|mm, -|a rated speed of not more than 3|680|rpm, -|an output of 600|W or more but not more than 740|W at 2|300|rpm and at 80|°C, -|a supply voltage of 12|V, -|a torque of not more than 5,67|Nm, -|a rotor position sensor, -|an electronic star-point relay, and -|for use with an electric power steering control module
DC motor with commutator, with -|an external diameter of 27.5|mm or more, but not more than 45|mm, -|a rated speed of 11|000|rpm or more, but not more than 23|200|rpm, -|a rated supply voltage of 3.6|V or more, but not more than 230|V, -|an output power of not more than 529|W, -|a free load current of not more than 3.1|A, -|a maximum efficiency of 54|% or more, for driving hand-held power tools
Brushless DC motor that can revolve counter clockwise (CCW), with: -|an input voltage of 264|V or more, but not more than 391|V, -|an external diameter of 81|mm (± 2,5|mm) or more, but not more than 150|mm (± 0,8|mm), -|an output power of not more than 125|W, -|E or B class winding insulation,for use in the manufacture of indoor or outdoor units of split-type air conditioning machines
Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics
Other
Crystalline silicon photovoltaic modules or panels
Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)
Consigned from Malaysia
Consigned from Taiwan
Other
Other
Of an output exceeding 750|W but not exceeding 75|kW
For use in civil aircraft
Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics
Other
Crystalline silicon photovoltaic modules or panels
Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)
Consigned from Malaysia
Consigned from Taiwan
Other
Fuel cell module containing at least polymer electrolyte membrane fuel cells whether or not in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems
Traction motor, with: -|a torque output of 200|Nm or more but not more than 300|Nm -|a power output of 50|kW or more but not more than 100|kW -|a speed of not more than 12|500|rpm for use in the manufacture of electric vehicles
Automotive-ready, brushless and permanently excited direct current motor with: -|a specified speed of not more than 4|000|rpm, -|a minimum output of 400|W, but not more than 1,3|kW (at 12V), -|a flange diameter of 90|mm or more, but not more than 150|mm, -|a maximum length of 190|mm, measured from the beginning of the shaft to the outer ending, -|a housing length of not more than 150|mm, measured from the flange to the outer ending, -|a two-piece (basic housing including electric components and flange with minimum 2|and maximum 6|bore holes) aluminium diecast housing with a sealing compound (groove with an O-ring and grease), -|a stator with single T-tooth design and single coil windings in 12/8|topology and -|surface magnets
Other
Of an output exceeding 75|kW but not exceeding 375|kW
Motors of an output not exceeding|150|kW and generators, for use in civil aircraft
Traction motor, with: -|a torque output of 200|Nm or more but not more than 300|Nm -|a power output of 50|kW or more but not more than 100|kW -|a speed of not more than 12|500|rpm for use in the manufacture of electric vehicles
Of an output exceding 150 kW, for use in certain types of aircraft
Electric drive for motor vehicles, with an output of not more than 315 kW, with: •an AC or DC motor whether or not with transmission, •power electronics
Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics
Fuel cell module containing at least polymer electrolyte membrane fuel cells whether or not in a housing with an integrated cooling system, for use in the manufacture of motor vehicle propulsion systems
Other
Crystalline silicon photovoltaic modules or panels
Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)
Consigned from Malaysia
Consigned from Taiwan
Other
Other
Of an output exceeding 375|kW
Generators for use in civil aircraft
Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics
Other
Crystalline silicon photovoltaic modules or panels
Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)
Consigned from Malaysia
Consigned from Taiwan
Other
Other
Other AC motors, single-phase
Of an output not exceeding 750|W
Of an output exceeding|735|W, for use in civil aircraft
For use in certain types of aircraft
Assembly, consisting of - a single-phase electric AC commutator motor, with an output of 480 W or more, an input power of more than 900 W but not more than 1 600 W, an external diameter of more than 119,8 mm but not more than 135,2 mm and a rated speed of more than 30 000 rpm but not more than 50 000 rpm, and - an air-inducting ventilator, for use in the manufacture of vacuum cleaners
Electric AC commutator motor, single-phase, with an output of 250 W or more, an input power of 700 W or more but not more than 2 700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30 000 rpm but not more than 50 000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners
Other
Of an output exceeding 750|W
Of an output not exceeding|150|kW, for use in civil aircraft
Of an output exceeding|150|kW, for use in certain types of aircraft
Electric AC commutator motor, single-phase, with an output of more than 750 W, an input power of 700 W or more but not more than 2 700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30 000 rpm but not more than 50 000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleaners
Assembly, consisting of - a single-phase electric AC commutator motor, with an output of more than 750 W, but not more than 1 400 W, an input power of more than 900 W but not more than 1 600 W, an external diameter of more than 119,8 mm but not more than 135,2 mm and a rated speed of more than 30 000 rpm but not more than 50 000 rpm, and - an air-inducting ventilator, for use in the manufacture of vacuum cleaners
Electric drive for motor vehicles, with an output of not more than 315 kW, with: •an AC or DC motor whether or not with transmission, •power electronics
Other
Other AC motors, multi-phase
Of an output not exceeding 750|W
Of an output exceeding|735|W, for use in civil aircraft
Of an output of less than 750|W, for use in certain types of aircraft
AC synchronous servo motor with resolver and brake for a maximum speed of|not more than 6|000|rpm, with: -|an output of 340|W or more but not more than 7,4|kW, -|a flange of dimensions of not more than|180|mm|!x!|180|mm, and -|a length from flange to extreme end of resolver of not more than|271|mm
Other
Of an output exceeding 750|W but not exceeding 75|kW
Of an output exceeding 750|W but not exceeding 7,5|kW
For use in civil aircraft
Other
AC synchronous servo motor with resolver and brake for a maximum speed of|not more than 6|000|rpm, with: -|an output of 340|W or more but not more than 7,4|kW, -|a flange of dimensions of not more than|180|mm|!x!|180|mm, and -|a length from flange to extreme end of resolver of not more than|271|mm
Other
Of an output exceeding 7,5|kW but not exceeding 37|kW
For use in civil aircraft
Other
Of an output exceeding 37|kW but not exceeding 75|kW
For use in civil aircraft
Other
Of an output exceeding 75|kW
Traction motors
Electric drive for motor vehicles, with an output of not more than 315 kW, with: •an AC or DC motor whether or not with transmission, •power electronics
Other
Other, of an output
Exceeding 75|kW but not exceeding 375|kW
Of an output not exceeding|150|kW, for use in civil aircraft
Of an output exceeding|150|kW, for use in certain types of aircraft
Other
Exceeding 375|kW but not exceeding 750|kW
For use in certain types of aircraft
Other
Exceeding 750|kW
For use in certain types of aircrafts
Other
AC generators (alternators)
Of an output not exceeding 75|kVA
Of an output not exceeding 7,5|kVA
For use in civil aircraft
Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics
Fuel cell module , AC generator with an output of 7.5|kVA or less, consisting of: -|a Hydrogen generator (desulphurizer, reformer and cleaner ) -|a PEM fuel cell stack and -|an Inverter for use as a part in a heating appliance
Other
Crystalline silicon photovoltaic modules or panels
Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)
Consigned from Malaysia
Consigned from Taiwan
Other
Other
Of an output exceeding 7,5|kVA but not exceeding 75|kVA
For use in civil aircraft
Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics
Other
Crystalline silicon photovoltaic modules or panels
Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)
Consigned from Malaysia
Consigned from Taiwan
Other
Other
Of an output exceeding 75|kVA but not exceeding 375|kVA
For use in civil aircraft
Other
Fuel cell system -|consisting of at least phosphoric acid fuel cells, -|in a housing with integrated water management and gas treatment, -|for permanent, stationary energy supply
Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics
Other
Crystalline silicon photovoltaic modules or panels
Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)
Consigned from Malaysia
Consigned from Taiwan
Other
Other
Of an output exceeding 375|kVA but not exceeding 750|kVA
For use in civil aircraft
Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics
Other
Crystalline silicon photovoltaic modules or panels
Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)
Consigned from Malaysia
Consigned from Taiwan
Other
Other
Of an output exceeding 750|kVA
Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics
Other
Crystalline silicon photovoltaic modules or panels
Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)
Consigned from Malaysia
Consigned from Taiwan
Other
Other
Electric generating sets and rotary converters
Generating sets with compression-ignition internal combustion piston engines (diesel or semi-diesel engines)
Of an output not exceeding 75|kVA
Of an output not exceeding 7,5|kVA
For use in civil aircraft
Other
Of an output exceeding 7,5|kVA but not exceeding 75|kVA
For use in civil aircraft
Other
Of an output exceeding 75|kVA but not exceeding 375|kVA
For use in civil aircraft
Other
Of an output exceeding 375|kVA
Of an output exceeding 375|kVA but not exceeding 750|kVA
For use in civil aircraft
Other
Of an output exceeding 750|kVA but not exceeding 2|000|kVA
For use in civil aircraft
Other
Of an output exceeding 2|000|kVA
For use in civil aircraft
Other
Generating sets with spark-ignition internal combustion piston engines
Of an output not exceeding 7,5|kVA
For use in civil aircraft
Other
Of an output exceeding 7,5|kVA but not exceeding 375|kVA
For use in civil aircraft
Other
Of an output exceeding 375|kVA but not exceeding 750|kVA
For use in civil aircraft
Other
Of an output exceeding 750|kVA
For use in civil aircraft
Other
Other generating sets
Wind-powered
For use in civil aircraft
Other
Other
Turbo-generators
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Electric rotary converters
For use in civil aircraft
Other
Parts suitable for use solely or principally with the machines of heading|8501|or 8502
Non-magnetic retaining rings
For use in certain types of aircraft
Other
Other
Of cast iron or cast steel
For use in certain types of aircraft
Other
Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring
Other
Other
For use in certain types of aircraft
Other
Stamped collector of an electric motor, having an external diameter of not more than 16|mm
Rotor, at the innerside provided with one or two magnetic rings whether or not incorporated in a steel ring
Stator for brushless motor of electrical power steering with a roundness tolerance of|50|μm
Rotor for brushless motor of electrical power steering with a roundness tolerance of 50|μm
Transmitter resolver for brushless motors of electrical power steering
Fuel cell membrane, in rolls or sheets, with a width of not more than 150|cm, of a kind used for manufacture of fuel cells in heading 8501
Stator for brushless motor, with: -|an internal diameter of 206,6|mm (± 0,5) -|an external diameter of 265,0|mm (± 0,2) and -|a width of 41,00|mm (± 0,3) of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums
Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5|mm (± 0,25|mm)
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Other
Electrical transformers, static converters (for example, rectifiers) and inductors
Ballasts for discharge lamps or tubes
Inductors, whether or not connected with a capacitor
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Liquid dielectric transformers
Having a power handling capacity not exceeding 650|kVA
Having a power handling capacity exceeding 650|kVA but not exceeding 10|000|kVA
Exceeding 650|kVA but not exceeding 1|600|kVA
Exceeding 1|600|kVA but not exceeding 10|000|kVA
Having a power handling capacity exceeding 10|000|kVA
Other transformers
Having a power handling capacity not exceeding 1|kVA
Measuring transformers
For voltage measurement
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other
For use in civil aircraft
Transformer for use in the manufacture of inverters in LCD modules
Switching transformers, having a power handling capacity of not more than 1|kVA for use in the manufacture of static converters
Electrical transformers: -|with a capacity of 1|kVA or less -|without plugs or cables, for internal use|in the manufacture of set top boxes and TVs
Other
Having a power handling capacity exceeding 1|kVA but not exceeding 16|kVA
For use in civil aircraft
Other
Having a power handling capacity exceeding 16|kVA but not exceeding 500|kVA
For use in civil aircraft
Other
Having a power handling capacity exceeding 500|kVA
Static converters
Of a kind used with telecommunication apparatus, automatic data-processing machines and units thereof
For use in civil aircraft
Other
Other
Accumulator chargers
For use in civil aircraft
Other
Other
Rectifiers
For use in civil aircraft
Electric rectifier, with a capacity of not more than 1|kVA, for use in the manufacture of appliances falling within subheading 8509|80 and heading|8510
Power supply boards for use in the manufacture of goods falling under heading 8521 and|8528
Printed circuit board equipped with a bridge rectifier circuit and other active and passive components -|with two output connectors -|with two input connectors which are available and useable in parallel -|able to switch between bright and dimmed operation mode -|with an input voltage of 40|V (+ 25|% -15|%) or 42|V (+ 25|% -15|%) in bright operation mode, with an input voltage of 30|V (± 4|V) in dimmed operation mode, or -|with an input voltage of 230|V (+20|% -15|%) in bright operation mode, with an input voltage of 160|V (± 15|%) in dimmed operation mode, or -|with an input voltage of 120|V (15|% -35|%) in bright operation mode, with an input voltage of 60|V (± 20|%) in dimmed operation mode -|with an input current reaching 80|% of its nominal value within 20|ms -|with an input frequency of 45|Hz or more, but not more than 65|Hz for 42|V and 230|V, and 45-70|Hz for 120|V versions -|with an maximum inrush current overshoot of not more than 250|% of the input current -|with a period of the inrush current overshoot of not more than 100|ms -|with an input current undershoot of not less than 50|% of the input current -|with a period of the inrush current undershoot of not more than 20|ms -|with a presettable output current -|with an output current reaching 90|% of its nominal pre-set value within 50|ms -|with an output current reaching zero within 30|ms after removal of the input voltage -|with an defined failure status in case of no-load or too-high load (end-of-life function)
Other
Inverters
Having a power handling capacity not exceeding 7,5|kVA
For use in civil aircraft
Other
Having a power handling capacity exceeding 7,5|kVA
For use in civil aircraft
Other
DC to AC inverter for use in traction motor control for use in the manufacture of electric vehicles
Other
Other
For use in civil aircraft
Direct current to direct current converter
Static converter comprising a power switch with insulated-gate bipolar transistors (IGBTs), contained in a housing, for use in the manufacture of microwave ovens of subheading 8516|50|00
Semiconductor power modules comprising: -|power transistors, -|integrated circuits, -|whether or not containing diodes and with or without thermistors, -|an operating voltage of not more than 600|V, -|not more than three electrical outputs each containing two power switches (whether MOSFET|(Metal Oxide Semiconductor Field-Effect Transistor) or IGBT (Insulated Gate Bi-polar Transistors)) and internal drives, and -|a rms (root mean square) current rating of not more than|15,7|A
Drive unit for industrial robot with: -|one or six 3-phase motor outputs with maximum 3|x 32|A, -|a main power input of 220|V AC or more, but not more than 480|V|AC, or 280|V|DC or more, but not more than 800|V|DC -|a logic power input of 24|V|DC, -|an EtherCat communication interface, -|and a dimension of 150|x|140|x|120|mm or more, but not more than 335|x|430|x|179|mm
Transfer moulded semiconductor power module comprising: -|power transistors, -|integrated circuits, -|whether or not containing diodes and with or without thermistors, -|a circuit configuration, -|either containing a direct drive stage with an operating voltage of more than 600|V, -|or containing a direct drive stage with an operating voltage of not more than 600|V and a rms current of more than 15,7|A, -|or including one or more power factor correction modules
Module for converting alternating current into direct current and direct current into direct current with -|a rated power of not more than 100|W -|an input voltage of 80|V or more, but not more than 305|V -|an certified input frequency of 47|Hz or more, but not more than 440|Hz -|one or more constant|voltage output(s) -|an operating temperature range of - 40|°C or more, but not more than + 85|°C, -|pins for mounting to a printed circuit
Power converter containing: -|a|DC to DC converter -|a|charger of a capacity of not not more than 7|kw -|switching functions for use in the manufacture of electric vehicles
Other
Other inductors
Of a kind used with telecommunication apparatus and for power supplies for automatic data-processing machines and units thereof
For use in civil aircraft
other
Other
For use in civil aircraft
Inductor with an inductance of not more than 62|mH
Coil choke with: - an inductance of 4,7 μH (± 20 %), - a DC resistance of not more than 0,1 Ohms, - an insulation resistance of 100 MOhms or more at 500 V (DC) for use in the manufacture of LCD and LED module power boards
Solenoid coil with -|a power consumption of not more than|6|W, -|an insulation resistance of more than 100|M ohms, and -|an insert hole of|11,4|mm or more, but not more than 11,8|mm
other
Parts
Of transformers and inductors
Electronic assemblies of machines of subheading|8504|50|20
Other
Ferrite cores
Ferrite cores, other than for deflection yokes
Reactor cores for use in a High Voltage Direct Current thyristor converter
Other
Other
For use in certain types of aircraft
Other
Of static converters
Electronic assemblies of machines of subheading|8504|40|30
Other
For use in certain types of aircraft
Thyristor SGCT (Symmetric Gate-Commutated Thyristor) with integrated gate driver: -|being a power electronic circuit mounted on the PCB, equipped with SGCT thyristor and electric and electronic components, -|having an ability to block the voltage - 6|500|V - in both directions (conducting and the reverse direction) of a kind used in medium voltagestatic converters (rectifiers and inverters)
Other
Electromagnets; permanent magnets and articles intended to become permanent magnets after magnetisation; electromagnetic or permanent magnet chucks, clamps and similar holding devices; electromagnetic couplings, clutches and brakes; electromagnetic lifting heads
Permanent magnets and articles intended to become permanent magnets after magnetisation
Of metal
For use in certain types of aircraft
Other
Permanent magnet having a remanence of 455mT (±15mT)
Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rounded rectangle with -|a length of not more than 90|mm, -|a width of not more than 90|mm| and -|a height of not more than 55|mm, or in the shape of a disc with a diameter of not more than 90mm, whether or not containing a hole in the centre
Permanent magnets of an alloy of either neodymium, iron and boron, or samarium and cobalt coated having undergone inorganic passivation (inorganic coating) using zinc phosphate|for the industrial manufacture of products in motor or sensory applications
A quarter sleeve, intended to become permanent magnet after magnetisation, -|consisting of at least neodymium, praseodym, iron, boron, dysprosium, aluminium and cobalt, -|with a width of 9,2|mm (- 0,1) -|with a length of 20|mm (+0,1) or 30|mm (+ 0,1) of a kind used on rotors for the manufacture of fuel pumps
Bars specifically shaped, intended to become permanent magnets after magnetization, containing neodymium, iron and boron, with dimensions: -|a length of 15|mm or more but not more than 52|mm, -|a width of 5|mm or more but not more than 42|mm, of a kind to be used in the manufacture of electric servomotors for industrial automation
Flat bars of an alloy of samarium and cobalt with -|a length of 30,4|mm (± 0,05|mm); -|a width of 12,5|mm (± 0,15|mm); -|a thickness of 6,9|mm (± 0,05|mm), or composed of ferrites in the shape of a quarter sleeves with: -|a length of 46|mm (± 0,75|mm); -|a width of 29,7|mm (± 0,2|mm), intended to become permanent magnets after magnetisation, of a kind used in car starters and devices extending the drive range of electric cars
Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with -|a diameter of not more than 45|mm, -|a height of not more than 45|mm, of a kind used in the manufacture of permanent magnets after magnetisation
Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnet -|whether or not containing a hole in the centre, -|with a diameter of not more than 90|mm, of a kind used in car loudspeakers
Articles in the form of a triangle, square or rectangle, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions of: -|a length of 9|mm or more but not more than 105|mm, -|a width of 5|mm or more but not more than 105|mm, -|a height of 2|mm or more but not more than 55|mm
Other
Other
Permanent magnets of agglomerated ferrite
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120|mm, containing a hole in the centre intended to become permanent magnets after magnetisation with a remanence between 245|mT and 470|mT
Flat bars of an alloy of samarium and cobalt with -|a length of 30,4|mm (± 0,05|mm); -|a width of 12,5|mm (± 0,15|mm); -|a thickness of 6,9|mm (± 0,05|mm), or composed of ferrites in the shape of a quarter sleeves with: -|a length of 46|mm (± 0,75|mm); -|a width of 29,7|mm (± 0,2|mm), intended to become permanent magnets after magnetisation, of a kind used in car starters and devices extending the drive range of electric cars
Other
Electromagnetic couplings, clutches and brakes
For use in certain types of aircraft
Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles
Other
Other, including parts
Electromagnets; electromagnetic or permanent magnet chucks, clamps and similar holding devices
For use in certain types of aircraft
Other
Coil for an electromagnetic valve, with: -|a plunger -|a diameter of 12,9|mm (+/- 0,1), -|a height without plunger of 20,5|mm (+/- 0,1), -|an electric cable with connector, and in a cylindrical metal housing
Electromagnets of a kind used solely or principally for magnetic resonance imaging apparatus other than electromagnets of heading 9018
Solenoid with a plunger, operating at a nominal supply voltage of 24|V at a nominal DC of 0,08|A, for use in the manufacture of products falling within heading 8517
Other
Electromagnetic lifting heads
For use in certain types of aircraft
Other
Parts
For use in certain types of aircraft
Other
Primary cells and primary batteries
Manganese dioxide
Alkaline
Cylindrical cells
Other
Other
Cylindrical cells
Other
Mercuric oxide
Silver oxide
Lithium
Cylindrical cells
Lithium cylindrical primary cells with: -|a diameter of 14,0|mm or more but not more than 26,0|mm; -|a length of 25|mm or more but not more than 51|mm; -|a voltage of 1,5|V or more, but not more than 3,6|V; -|a capacity of 0,80|Ah or more, but not more than 5,00|Ah for use in the manufacture of |telemetry and medical devices, electronic meters or remote controls
Other
Button cells
Other
Lithium iodine single cell battery the dimensions of which do not exceed 9|mm|!x!|23|mm|!x!|45|mm and a voltage of not more than 2,8|V
Unit consisting of not more than 2|lithium batteries embedded in a socket for integrated circuits (battery-buffered socket), with not more than 32|connections and incorporating a control circuit
Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28|mm|!x!|45|mm|!x!|15|mm and a capacity of not less than 1,05|Ah
Other
Air-zinc
Other primary cells and primary batteries
Dry zinc-carbon batteries of a voltage of 5,5|V or more but not exceeding 6,5|V
Other
Parts
Cathode, in rolls,|for air zinc button cell batteries (hearing aid batteries)
Other
Electric accumulators, including separators therefor, whether or not rectangular (including square)
Lead-acid, of a kind used for starting piston engines
Working with liquid electrolyte
For use in civil aircraft
Other
Lead-acid accumulators or -modules, of a kind used for starting piston engines with -|a nominal capacity of not more 32|Ah, -|a length of not more than 205|mm, -|a width of not more than 130|mm and -|a height of not more than 190|mm for use in the manufacture of articles of CN-code 8711
Lead acid starter battery, with: -|a charge acceptance capacity of 200|% or more of the level of an equivalent conventional flooded battery during the first 5|seconds of charge, -|a liquid electrolyte, for use in the manufacture of passenger cars and light commercial vehicles employing high regenerative alternator controls or start/stop systems with high regenerative alternator controls
Other
Other
For use in civil aircraft
Other
Other lead-acid accumulators
Working with liquid electrolyte
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Nickel-cadmium
Hermetically sealed
For use in civil aircraft
Cylindrical nickel-cadmium accumulator or module, with a length of 65,3mm (±1,5mm) and a diameter of 14,5mm (±1mm), having a nominal capacity of 1000mAh or more, for use in the manufacture of rechargeable batteries
Other
Other
For use in civil aircraft
Other
Nickel-iron
For use in civil aircraft
Other
Nickel-metal hydride
For use in civil aircraft
Rectangular accumulator or module, with a length of not more than 69|mm, a width of not more than 36|mm and a thickness of not more than 12|mm, for use in the manufacture of rechargeable batteries
Cylindrical nickel-hydride accumulator or module, of a diameter of not more than 14,5mm, for the manufacture of rechargeable batteries
Other
Lithium-ion
For use in civil aircraft
Cylindrical lithium-ion-accumulators or modules with: -|a nominal capacity of 8,8|Ah or more, but not more than 18|Ah, -|a nominal voltage of 36|V or more, but not more than 48|V, -|a power of 300|Wh or more, but not more than 648|Wh, for use in the manufacture of electric bicycles
Lithium-ion starter accumulator, consisting of four rechargeable lithium-ion secondary cells, with: -|a rated voltage of 12|V, -|a length of 350|mm or more but not more than 355|mm, -|a width of 170|mm or more but not more than 180|mm, -|a height of 180|mm or more but not more than 195|mm, -|weighing 10|kg or more but not more than 15|kg -|a nominal charge of 60|Ah or more, but not more than 80|Ah
Rectangular accumulator or module, with a length of not more than 69|mm, a width of not more than 36|mm and a thickness of not more than 12|mm, for use in the manufacture of rechargeable batteries
Lithium-ion-accumulator or module with: -|a nominal capacity of 72|Ah or more, but not more than 100|Ah, -|a nominal voltage of 3,2|V -|a weight of 1,9|kg more, but not more than 3,4|kg for use in the manufacture of rechargeable hybrid electric vehicle batteries
Rectangular modules for incorporation in lithium-ion rechargeable batteries, with: -|a width of 352,5|mm (± 1|mm) or 367,1|mm|(±1mm) -|a depth of 300|mm (± 2|mm) or 272,6|mm|(± 1|mm) -|a height of 268,9|mm|(± 1,4|mm) or 229,5|mm (± 1mm) -|a weight of 45,9|kg or 46,3|kg -|a rating of 75|Ah and -|a nominal voltage|of 60|V
Lithium-ion cylindrical accumulator with: -|a nominal capacity of 10|Ah or more, but not more than 20|Ah; -|a nominal voltage of 12,8|V (± 0.05) or more, but not more than 15,2|V (± 0,05); -|a power of 128|Wh or more, but not more than 256|Wh, for|use in the manufacture of electric bicycle drives
Cylindrical lithium-ion accumulator or module, with a length of 63mm or more and a diameter of 17,2mm or more, having a nominal capacity of 1200|mAh or more, for use in the manufacture of rechargeable batteries
Lithium-ion accumulator, with: -|a length of 150|mm or more, but not more than 300|mm -|a width of 700|mm or more, but not more than 1|000|mm -|a height of 1|100|mm or more, but not more than 1|500|mm -|a weight of 75|kg or more, but not more than 160|kg -|a nominal capacity not less than 150|Ah and not more than 500|Ah
Lithium-ion accumulator, with: -|a length of 1|200|mm or more, but not more than 2|000|mm -|a width of 800|mm or more, but not more than 1|300|mm -|a height of 2|000|mm or more, but not more than 2|800|mm -|a weight of 1|800|kg or more, but not more than 3|000|kg -|a nominal capacity of 2|800|Ah or more but not more than 7|200|Ah
Lithium-ion accumulators, with -|a thickness of not more than 4,15|mm, -|a width of not more than 245,15|mm, -|a length of not more than 90,15|mm, -|a nominal capacity of 1|000|mAh or more but not more than 10|000|mAh, -|a weight of not more than 250|g for use in the manufacture of products falling within subheading 8471|30|00
Rechargeable Lithium-ion Polymer Battery with: -|a nominal capacity of 1|060|mAh, -|a nominal voltage of 7,4|V (average voltage at 0,2|C discharge), -|a charging voltage of 8,4|V (±0,05), -|a length of 86,4|mm ((±0,1), -|a width of 45|mm (±0,1), -|a height of 11|mm (±0,1), for use in the manufacture of cash registers
Lithium-ion accumulators, with -|a thickness of not more than 4,15|mm, -|a width of not more than 75,15|mm, -|a length of not more than 150,15|mm, -|a nominal capacity of 1|000|mAh or more but not more than 10|000|mAh, -|a weight of not more than 150|g, for use in the manufacture of products falling within subheading 8517|12|00
Modules for the assembly of batteries of ion lithium electric accumulators with: -|a length of|298|mm or more, but not more than 408|mm, -|a width of|33,5|mm or more, but not more than|209|mm, -|a height of|138|mm or more, but not more than|228|mm, -|a weight|of|3,6|kg or more, but not more than 17|kg, and -|a power of|458|Wh or more, but not more than 2|158|Wh
Batteries of lithium-ion electric accumulators or rechargeable module: -|a length of 1|203|mm or more, but not more than 1|297|mm, -|a width of 282|mm or more, but not more than 772|mm, -|a height of 792|mm or more, but not more than 839|mm, -|a weight of 253|kg or more, but not more than 293|kg, -|power of 22|kWh or 26|kWh, and -|constituted of 24|or 48|modules
Lithium-ion accumulator or module in cylindrical form, with: -|a base similar to an ellipse squeezed in the middle, -|a length of|49|mm or more (not including terminals), -|a width of 33,5|mm or more, -|a thickness of 9,9|mm or more, -|a rated capacity of 1,75|Ah or more, and -|a rated voltage of 3,7|V, for the manufacture of rechargeable batteries
Lithium-ion accumulator or module, cuboid in shape, with: -|some of the corners rounded off, -|a length of 76|mm or more (not including terminals), -|a width of 54,5|mm or more, -|a thickness of 5,2|mm or more, -|a rated capacity of 3|100|mAh or more, and -|a rated voltage of 3,7|V, for the manufacture of rechargeable batteries
Lithium-ion rechargeable batteries, with: •a length of 1213mm or more, but not more than 1575mm, •a width of 245mm or more but not more than 1200mm, •a height of 265mm or more, but not more than 755mm, •a weight of 265kg or more but not more than 294kg, •a nominal capacity of 66.6Ah, put up in packs of 48 modules
Cylindrical Lithium Ion Cell with -|3,5|VDC to 3,8|VDC, -|300|mAh to|900|mAh and -|a|diameter of 10,0|mm to 14,5|mm
Lithium-ion rechargeable batteries, with: -|a length of 700|mm or more, but not more than 2|820|mm -|a width of 935|mm or more, but not more than 1|660|mm -|a height of 85|mm or more, but not more than 700|mm -|a weight of 280|kg or more, but not more than 700|kg -|a power of not more than 130|kWh
Rectangular lithium-ion-accumulator, with -|a metal casing, -|a length of 173|mm (±|0,15|mm), -|a width of 21|mm (±|0,1|mm), -|a height of 91|mm (±|0,15|mm), -|a nominal voltage of 3,3|V and, -|a nominal capacity of 21|Ah|or more
Rectangular lithium-ion-accumulator or module, with -|a metal casing, -|a length of 171|mm (±|3|mm), -|a width of 45,5|mm (±|1|mm), -|a height of 115|mm (±|1|mm), -|a nominal voltage of 3,75|V and -|a nominal capacity of 50|Ah for use in the manufacture of rechargeable batteries for motor vehicles
Rectangular modules for incorporation in lithium-ion rechargeable batteries: -|of a length of 312|mm or more, but not more than 350|mm -|of a width of 79,8|mm or more, but not more than 225|mm -|of a height of 35|mm or more, but not more than 168|mm -|of a weight of 3,95|kg or more, but not more than 8,56|Kg -|with a rating of 66,6|Ah or more, but not more than 129|Ah
Other
Other accumulators
For use in civil aircraft
Rechargeable Lithium-ion Polymer Battery with: -|a nominal capacity of 1|060|mAh, -|a nominal voltage of 7,4|V (average voltage at 0,2|C discharge), -|a charging voltage of 8,4|V (±0,05), -|a length of 86,4|mm ((±0,1), -|a width of 45|mm (±0,1), -|a height of 11|mm (±0,1), for use in the manufacture of cash registers
Other
Parts
Separators
For use in civil aircraft
Other
Sheet of polypropylene in the form of a roll: -|with a thickness of not more than 30|μm, -|of a width of not more than 210|mm, -|conforming to ASTM|D882,for use in the manufacture of separators for lithium-ion electric vehicle batteries
Other
Other
For use in civil aircraft
Other
Roll of polymer-metal laminate comprising: -|a layer of poly(ethylene terephthalate), -|a layer of aluminium, -|a layer of polypropylene, -|with a width of not more than 275|mm, -|a total thickness of not more than 165|μm, and -|conforming to ASTM|D1701-91|and ASTM|D882-95A for use in the manufacture of lithium-ion electric vehicle batteries
Roll of laminate foil of graphite and copper, with: -|a width of 610|mm or more but not more than 620|mm, and -|a diameter of 690|mm or more but not more than 710|mm,for use in the manufacture of lithium-ion electric vehicle batteries
Cut plate of nickel-plated copper foil, with: •a width of 70 mm (± 5 mm), •a thickness of 0,4 mm (± 0,2 mm), •a length of not more than 55 mm, for use in the manufacture of lithium-ion electric vehicle batteries
Sheet in the form of a roll consisting of a laminate of lithium and manganese bonded to aluminium, with: -|a width of 595|mm or more but not more than 605|mm, and -|a diameter of 690|mm or more but not more than 710|mm, for use in the manufacture of cathodes for lithium-ion electric vehicle batteries
Other
Vacuum cleaners
With self-contained electric motor
Of a power not exceeding 1|500|W and having a dust bag or other receptacle capacity not exceeding 20|l
Other
Other vacuum cleaners
Parts
Electronic circuit card without separate housing for actuating and controlling vacuum cleaner brushes|powered by not more than 300|W
Electronic circuit cards that -|are connected by wire or radio frequency to each other and the motor controller card, and -|regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program, -|whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)
Other
Electromechanical domestic appliances, with self-contained electric motor, other than vacuum cleaners of heading|8508
Food grinders and mixers; fruit or vegetable juice extractors
Other appliances
Parts
Shavers, hair clippers and hair-removing appliances, with self-contained electric motor
Shavers
Hair clippers
Hair-removing appliances
Parts
Electrical ignition or starting equipment of a kind used for spark-ignition or compression-ignition internal combustion engines (for example, ignition magnetos, magneto-dynamos, ignition coils, sparking plugs and glow plugs, starter motors); generators (for example, dynamos, alternators) and cut-outs of a kind used in conjunction with such engines
Sparking plugs
For use in civil aircraft
Other
Ignition magnetos; magneto-dynamos; magnetic flywheels
For use in civil aircraft
Other
Distributors; ignition coils
For use in civil aircraft
Igniter integrated coil assembly with: -|an igniter, -|a coil on plug assembly with an integrated mounting bracket, -|a housing, -|a length of 90|mm or more but not more than 200|mm (+/- 5|mm), -|an operating temperature of -40|°C or more but not more than 130|°C, -|a voltage of 10,5|V or more, but not more than 16|V
Other
Starter motors and dual purpose starter-generators
For use in civil aircraft
Other
Other generators
For use in civil aircraft
Other
Other equipment
For use in civil aircraft
Other
Parts
For use in certain types of aircraft
Other
Electrical lighting or signalling equipment (excluding articles of heading|8539), windscreen wipers, defrosters and demisters, of a kind used for cycles or motor vehicles
Lighting or visual signalling equipment of a kind used on bicycles
Other lighting or visual signalling equipment
Information screen displaying at least time, date and status of safety features in a vehicle with an operating voltage of 12|V or more, but not more than 14,4|V, of a kind used in the manufacturing of goods of Chapter 87
Lighting module, containing at least: -|two LEDs, -|glass or plastic lenses, focusing/scattering the light emitted by the LEDs, -|reflectors redirecting the light emitted by the LEDs, in an aluminium housing with a radiator, mounted at a bracket with an actuator
Fog lamp with a galvanised inner surface, containing: -|a plastic holder with three or more brackets, -|one or more 12|V bulbs, -|a connector, -|a plastic cover, -|whether or not with a connection cable for use in the manufacture of goods of Chapter 87
Other
Sound signalling equipment
Burglar alarms of a kind used for motor vehicles
Other
Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12|V, comprising: -|coil, -|magnet, -|metal membrane, -|connector, -|holder of a kind used in the manufacture of goods of Chapter 87
Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing: -|a printed circuit board, -|a connector, -|whether or not a metal holder of a kind used in the manufacture of goods of chapter 87
Other
Windscreen wipers, defrosters and demisters
Car door mirror heating foil: -|with two electrical contacts, -|with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the|side of the mirror glass), -|with a protective paper film on both sides
Other
Parts
Of apparatus of subheading|8512|30|10
Other
Portable electric lamps designed to function by their own source of energy (for example, dry batteries, accumulators, magnetos), other than lighting equipment of heading|8512
Lamps
Parts
Industrial or laboratory electric furnaces and ovens (including those functioning by induction or dielectric loss); other industrial or laboratory equipment for the heat treatment of materials by induction or dielectric loss
Resistance heated furnaces and ovens
Bakery and biscuit ovens
Other
Glass Filament Melter with heater basket/bushing assembly: -|electrically heated, -|with opening -|with a multiplicity of tips (holes) of platinum/rhodium alloy -|used to melt glass batches and condition molten glass -|for drawing into continuous fibres
Other
Furnaces and ovens functioning by induction or dielectric loss
Induction furnaces and ovens
Dielectric furnaces and ovens
Cavity assembly comprising at least: -|a transformer with an input of not more than 240|V and an output of not more than 3|000|W -|an AC or DC fan motor with an output of not more than 42|watts -|a housing made of stainless steel| -|with or without a magnetron of a microwave output power of not more than 900|W for use in the manufacture of built-in products of headings 8514|2080, 8516|5000|and 8516|6080
Other
Other furnaces and ovens
Of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
Other
Other equipment for the heat treatment of materials by induction or dielectric loss
Parts
Of other furnaces and ovens of a kind used solely or principally for the manufacture of printed circuits or printed circuit assemblies
Other
Electric (including electrically heated gas), laser or other light or photon beam, ultrasonic, electron beam, magnetic pulse or plasma arc soldering, brazing or welding machines and apparatus, whether or not capable of cutting; electric machines and apparatus for hot spraying of metals or cermets
Brazing or soldering machines and apparatus
Soldering irons and guns
Other
Wave soldering machines of a kind used solely or principally for the manufacture of printed circuit assemblies
Other
Machines and apparatus for resistance welding of metal
Fully or partly automatic
Other
Machines and apparatus for arc (including plasma arc) welding of metals
Fully or partly automatic
Other
For manual welding with coated electrodes, complete with welding or cutting devices, and consigned with
Transformers
Generators or rotary converters or static converters, rectifiers or rectifying apparatus
Other
Other machines and apparatus
For treating metals
Other
Parts
Tungsten welding electrodes, including tungsten bars and rods for welding electrodes, containing 94|% or more by weight of tungsten, other than those obtained simply by sintering, whether or not cut to length
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Of wave soldering machines of a kind used solely or principally for the manufacture of printed circuit assemblies
Other
Electric instantaneous or storage water heaters and immersion heaters; electric space-heating apparatus and soil-heating apparatus; electrothermic hairdressing apparatus (for example, hairdryers, hair curlers, curling tong heaters) and hand dryers; electric smoothing irons; other electrothermic appliances of a kind used for domestic purposes; electric heating resistors, other than those of heading|8545
Electric instantaneous or storage water heaters and immersion heaters
Instantaneous water heaters
Other
Electric space-heating apparatus and electric soil-heating apparatus
Storage heating radiators
Other
Liquid-filled radiators
Convection heaters
Other
With built-in fan
Other
Electrothermic hairdressing or hand-drying apparatus
Hairdryers
Other hairdressing apparatus
Hand-drying apparatus
Electric smoothing irons
Microwave ovens
Cavity assembly comprising at least: -|a transformer with an input of not more than 240|V and an output of not more than 3|000|W -|an AC or DC fan motor with an output of not more than 42|watts -|a housing made of stainless steel| -|with or without a magnetron of a microwave output power of not more than 900|W for use in the manufacture of built-in products of headings 8514|2080, 8516|5000|and 8516|6080
Other
Other ovens; cookers, cooking plates, boiling rings; grillers and roasters
Cookers (incorporating at least an oven and a hob)
Cooking plates, boiling rings and hobs
Grillers and roasters
Ovens for building in
Cavity assembly comprising at least: -|a transformer with an input of not more than 240|V and an output of not more than 3|000|W -|an AC or DC fan motor with an output of not more than 42|watts -|a housing made of stainless steel| -|with or without a magnetron of a microwave output power of not more than 900|W for use in the manufacture of built-in products of headings 8514|2080, 8516|5000|and 8516|6080
Other
Other
Other electrothermic appliances
Coffee or tea makers
Toasters
Other
Deep fat fryers
Other
Ironing boards, including sleeve boards, whether or not free standing, with a steam soaking and/or heating top and/or blowing top
Other
Electric heating resistors
Assembled with an insulated former
Assembled only with a simple insulated former and electrical connections, used for anti-icing or de-icing, for use in civil aircraft
Car door mirror heating foil: -|with two electrical contacts, -|with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the|side of the mirror glass), -|with a protective paper film on both sides
Other
Other
Parts
For heating aircraft and wing surfaces, mounted on propeller aeroplanes, and for use in certain types of aircraft
Other
Legs, tops and iron rests of ironing boards, including of sleeve boards, whether or not free standing, with a steam soaking and/or heating top and/or blowing top
Ventilation sub-assembly of an electric deep-fat fryer: -|fitted with a motor having a power rating of 8|W at 4|600|rpm, -|governed by an electronic circuit, -|operating at ambient temperatures above 110|°C, -|fitted with a thermoregulator
Inner pot -|containing side and central openings, -|of annealed aluminium, -|with a ceramic coating, heat resistant to more than 200° C for use in the manufacture of an electric fryer
Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of headings 8514|2080, 8516|5000|and 8516|6080
Other
Telephone sets, including telephones for cellular networks or for other wireless networks; other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network), other than transmission or reception apparatus of heading|8443, 8525, 8527|or 8528
Telephone sets, including telephones for cellular networks or for other wireless networks
Line telephone sets with cordless handsets
Telephones for cellular networks or for other wireless networks
Radio-telegraphic or radio-telephonic apparatus, for use in civil aircraft
Other
Other
Other apparatus for the transmission or reception of voice, images or other data, including apparatus for communication in a wired or wireless network (such as a local or wide area network)
Base stations
Radio-telegraphic or radio-telephonic apparatus, for use in civil aircraft
Other
Machines for the reception, conversion and transmission or regeneration of voice, images or other data, including switching and routing apparatus
Radio-telegraphic or radio-telephonic apparatus, for use in civil aircraft
Other
Other
Videophones
Entry-phone systems
Reception apparatus for radio-telephony or radio-telegraphy
Portable receivers for calling, alerting or paging
For radio-telephony or radio-telegraphy, for use in civil aircraft
Other
Other
For radio-telephony or radio-telegraphy, for use in civil aircraft
Other
Other
Radio-telegraphic or radio-telephonic apparatus, for use in civil aircraft
Other
Parts
Aerials and aerial reflectors of all kinds; parts suitable for use therewith
Aerials for radio-telegraphic or radio-telephonic apparatus
For use in civil aircraft
Other
Telescopic and whip-type aerials for portable apparatus or for apparatus for fitting in motor vehicles
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other
Microphones and stands therefor; loudspeakers, whether or not mounted in their enclosures; headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers; audio-frequency electric amplifiers; electric sound amplifier sets
Microphones and stands therefor
Microphones having a frequency range of 300|Hz to 3,4|kHz, of a diameter not exceeding 10|mm and a height not exceeding 3|mm, of a kind used for telecommunications
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Loudspeakers, whether or not mounted in their enclosures
Single loudspeakers, mounted in their enclosures
For use in civil aircraft
Loudspeaker of -|impedance 4|Ohm or more but not exceeding 16|Ohm, -|nominal power of 2|W or more but not exceeding 20|W, -|with or without plastic bracket, and -|electricwired with a connector or wireless, mounted on a cabinet for use in the manufacture of TV sets and video monitors
Other
Multiple loudspeakers, mounted in the same enclosure
For use in civil aircraft
Other
Other
Loudspeakers having a frequency range of 300|Hz to 3,4|kHz, of a diameter not exceeding 50|mm, of a kind used for telecommunications
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Loudspeakers of: -|an impedance of 3|Ohm or more, but not more than 16|Ohm, -|a nominal power of 2|W or more, but not more than 20|W, -|with or without plastic bracket, and -|with or without electric cable fitted with connectors, of a kind used for TV sets and video monitors manufacture as well as home entertainment systems
Other
Headphones and earphones, whether or not combined with a microphone, and sets consisting of a microphone and one or more loudspeakers
Line telephone handsets
Other
For use in civil aircraft
Headphone and earphone for hearing aids, contained in a housing the exterior dimensions of which, excluding connecting points, do not exceed|5|mm|!x!|6|mm|!x!|8|mm
Other
Audio-frequency electric amplifiers
Telephonic and measurement amplifiers
Other
For use in civil aircraft
Other
Circuit board sub-assembly, comprising digital audio signal decoding, audio signal processing and amplification with dual and/or multi-channel functionality
Circuit board sub-assembly, comprising power supply, active equalizer and power amplifier circuits
Other
Electric sound amplifier sets
For use in civil aircraft
Other
Parts
For use in certain types of aircraft
Other
Magnet system consisting of : -|a steel coreplate, in the form of a disk on one side provided with a cylinder -|a neodymium magnet -|an upper plate -|a lower plate of a kind used in car loudspeakers
Loudspeaker cone, made from paper pulp or polypropylene, with accompanying dustcaps, of a kind used in car loudspeakers
Diaphragm for an electrodynamic speaker with -|an outside diameter of 25|mm or more but not more than 250|mm, -|a resonance frequency of 20|Hz or more but not more than 150|Hz, -|a total height of 5|mm or more but not more than 50|mm, -|an edge thickness of 0,1|mm or more but not more than 3|mm
Upper plate for a loudspeaker magnet system of integrally punched, stamped and plated steel, in the shape of a disk, whether or not containing a hole in the centre, of a kind used in car loudspeakers
Integrated car loudspeaker housing, consisting of: -|a speaker frame and magnet system holder with a protective coating and -|an embossed anti-dust cloth
Integrally cold-upsetted steel coreplate, in the form of a disk on one side provided with a cylinder, for use in the manufacture of loudspeakers
Other
Sound recording or sound reproducing apparatus
Apparatus operated by coins, banknotes, bank cards, tokens or by other means of payment
Coin- or disc-operated record-players
Other
With laser reading system
Other
Music reproducers and automatic announcers, for use in certain types of aircraft
Other
Turntables (record-decks)
Telephone answering machines
Other apparatus
Using magnetic, optical or semiconductor media
Sound reproducing apparatus (including cassette-players), not incorporating a sound recording device
Transcribing machines
Other sound reproducing apparatus
Pocket-size cassette-players
Other, cassette-type
With an analogue and digital reading system
Music reproducers and automatic announcers, for use in certain types of aircraft
Other
Other
Music reproducers and automatic announcers, for use in certain types of aircraft
Other
Other
With laser reading system
Of a kind used in motor vehicles, of a type using discs of a diameter not exceeding 6,5|cm
Other
Other
Music reproducers and automatic announcers, for use in certain types of aircraft
Other
Other apparatus
Dictating machines not capable of operating without an external source of power
Other magnetic tape recorders incorporating sound reproducing apparatus
Cassette-type
With built-in amplifier and one or more built-in loudspeakers
Capable of operating without an external source of power
Other
Pocket-size recorders
Other
Other
Using magnetic tapes on reels, allowing sound recording or reproduction either at a single speed of 19|cm per second or at several speeds if those comprise only 19|cm per second and lower speeds
Other
Other
For use in civil aircraft
Other
Other
Sound reproducing apparatus, not incorporating a sound recording device
Record-players, other than those of subheading|8519|20
Transcribing machines
Other
Music reproducers and automatic announcers, for use in certain types of aircraft
Other
Other
For use in civil aircraft
Other
Video recording or reproducing apparatus, whether or not incorporating a video tuner
Magnetic tape-type
Using tape of a width not exceeding 1,3|cm and allowing recording or reproduction at a tape speed not exceeding 50|mm per second
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other
Video-reproducing apparatus, for certain types of aircraft
Digital video recorder: -|without a hard disk drive, -|with or without a DVD-RW drive, -|with either motion detection or capability of motion detection through IP connectivity via LAN connector -|with or without a USB serial port, for use in the manufacture of Closed-circuit television (CCTV) surveillance systems
Other
Parts and accessories suitable for use solely or principally with the apparatus of heading|8519|or 8521
Pick-up cartridges
Other
Styli; diamonds, sapphires and other precious or semi-precious stones (natural, synthetic or reconstructed) for styli, whether or not mounted
Other
Electronic assemblies
Of apparatus of subheading|8519|50|00
Other
Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for apparatus of subheadings 8519 81 95 and 8519 89 90, for use in civil aircraft
For cockpit voice-recorders for use in certain types of aircraft
Parts and accesories for music reproducers and automatic announcers, for use in certain types of aircraft
Electronic assembly for a laser read-head of a compact disc player, comprising: -|a printed circuit, -|a photo-detector, in the form of a monolithic integrated circuit, contained in a housing, -|not more than 3|connectors, -|not more than 1|transistor, -|not more than 3|variable and 4|fixed resistors, -|not more than 5|capacitors, the whole mounted on a support
Printed circuit board assembly comprising: -|a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities, -|a microprocessor capable of receiving remote control messages and controlling the tuner chipset, for use in the manufacture of home entertainment systems
Printed circuit board subassembly, comprising: -|a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly,|with a signal decoder, -|a radio frequency|(RF) remote control receiver, -|an infrared remote control signal transmitter, -|a SCART signal generator -|a TV state sensor for use in the manufacture of home entertainment systems
Assembly, comprising at least a flexible printed circuit, a laser driver integrated circuit and a signal converter integrated circuit
Other
Single cassette-deck assemblies with a total thickness not exceeding 53|mm, of a kind used in the manufacture of sound recording and reproducing apparatus
Other
Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for apparatus of subheadings 8519 81 95 and 8519 89 90, for use in civil aircraft
For cockpit voice-recorders for use in certain types of aircraft
Heat sinks and cooling fins of aluminium, for maintaining the operating temperature of transistors and/or integrated circuits in products of heading 8521
Parts and accessories for music reproducers and automatic announcers, for use in certain types of aircraft
Holder, fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players
Assembly for optical discs, comprising at least an optical unit and DC motors, capable or not of double layer recording
Video tape recording/reproducing assembly comprising at least a motor and a printed circuit board containing integrated circuits with driver or control functions, whether or not incorporating a transformer, for use in the manufacture of products falling within heading|8521
Optical reading head for CD player, consisting of one laser diode, one photo detector integrated circuit and one beam splitter
Laser optical drive unit assembly (so called mecha units) for the recording and/or reproduction of digital video and/or audio signals, comprising at least a laser optical reading and/or writing unit, one or more DC motors and not containing a printed circuit board or containing a printed circuit board not capable of signal processing for sounds and images, for use in the manufacture of products falling within headings|8519, 8521, 8526, 8527, 8528|or 8543
Laser optical pick up unit for the reproduction of optical signals from CD or DVD and the recording of optical signal on DVD, comprising at least -|a laser diode, -|a laser driver integrated circuit, -|a photo detector integrated circuit, -|a front monitor integrated circuit and an actuator, for use in the manufacture of products falling within heading|8521
Blu-ray optical pick-up unit, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least: -|laser diodes operating at three different wavelengths, -|a photo detector integrated circuit and| -|an actuator, for the manufacture of products falling within heading 8521
Blu-ray drive mechanism, whether or not recordable, for use with Blu-ray, DVD and CD discs, comprising at least: -|an optical pick up unit with laser diodes operating at three different wavelengths, -|a spindle motor, -|a stepping motor
Video head drum, with video heads or with video and audio heads and an electric motor, for use in the manufacture of products falling within heading|8521
Light-Emitting Diode (LED) backlights modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protectiv diodes, and used as backlights illumination for liquid crystal displays (LCDs)
Hard disk drive, for incorporation in products of heading|8521
Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8521
Other
Discs, tapes, solid-state non-volatile storage devices, 'smart cards' and other media for the recording of sound or of other phenomena, whether or not recorded, including matrices and masters for the production of discs, but excluding products of Chapter|37
Magnetic media
Cards incorporating a magnetic stripe
Other
Magnetic tapes; magnetic discs
Unrecorded
Other
For reproducing phenomena other than sound or image
For reproducing representations of instructions, data, sound, and image recorded in a machine-readable binary form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data-processing machine
Other
Other
Optical media
Unrecorded
Discs for laser reading systems of a recording capacity not exceeding 900|megabytes, other than erasable
Discs for laser reading systems of a recording capacity exceeding 900|megabytes but not exceeding 18|gigabytes, other than erasable
Other
Other
Discs for laser reading systems
For reproducing phenomena other than sound or image
For reproducing sound only
Of a diameter not exceeding 6,5|cm
Of a diameter exceeding 6,5|cm
Other
For reproducing representations of instructions, data, sound, and image recorded in a machine-readable binary form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data-processing machine
Other
Digital versatile discs (DVD)
Other
Other
For reproducing phenomena other than sound or image
For reproducing representations of instructions, data, sound, and image recorded in a machine-readable binary form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data-processing machine
Other
Semiconductor media
Solid-state non-volatile storage devices
Unrecorded
Other
For reproducing phenomena other than sound or image
For reproducing representations of instructions, data, sound, and image recorded in a machine-readable binary form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data-processing machine
Other
SD memory card with non-upgradable set of uploaded maps for incorporation into car navigation units
Other
'Smart cards'
With two or more electronic integrated circuits
Engine pressure indicators, for use in certain types of aircraft
Other
Other
Other
Unrecorded
Other
For reproducing phenomena other than sound or image
For reproducing representations of instructions, data, sound, and image recorded in a machine-readable binary form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data-processing machine
Other
Other
Unrecorded
Other
For reproducing phenomena other than sound or image
For reproducing representations of instructions, data, sound, and image recorded in a machine-readable binary form, and capable of being manipulated or providing interactivity to a user, by means of an automatic data-processing machine
Other
Transmission apparatus for radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras, digital cameras and video camera recorders
Transmission apparatus
Transmission apparatus incorporating reception apparatus
Television cameras, digital cameras and video camera recorders
Television cameras
With three or more camera tubes
Other
Assembly for television cameras of dimensions of not more than 10|mm|!x!|15|mm|!x!|18|mm, comprising an image sensor, an objective and a color processor, having an image resolution of not more than 1024|!x!|1280|pixels, whether or not fitted with cable and/or housing, for the manufacture of goods of subheading 8517|12|00
Camera: -|of a weight of not more than 5,9|kg, -|without a housing, -|of dimensions of not more than 405|mm|!x! 315|mm, -|with a single Charge-Couple-Device (CCD) or Complementary Metal Oxide Semiconductor (CMOS) sensor, -|with effective pixels of not more than 5|megapixels, for use in closed circuit television (CCTV) surveillance systems or in appliances for eye-checks
Assembly for cameras used in computer notebooks of dimensions not exceeding 15|x|25|x|25|mm, comprising an image sensor, an objective and a color processor, having an image resolution not exceeding 1600|x|1200|pixel, whether or not fitted with cable and/or housing, whether or not mounted on a base and containing a LED chip
Camera module with a resolution of 1|280|*|720|P|HD, with two microphones, for use in the manufacture of products of heading 8528
Remote camera head, whether or not contained in a housing -|with dimensions (without cable socket) of not more than 27|x 30|x 38,5|mm (widthxheightxlength), -|with three MOS imaging sensors with two or more effective megapixels per sensor and a prism block for distribution of the RGB spectrum colours to the three sensors, -|with a C-Mount lens mount, -|with a weight of not more than 70|g, -|with an LVDS digital video output, -|with a permanent EEPROM memory for local storage of calibration data for colour rendering and defective pixel compensation for use in the manufacture of miniaturised industrial camera systems
Camera module|with a resolution of 1|920|x 1|080|P HD with two microphones for use in the manufacture of products falling within heading 8528
Image scanning cameras, using: -|a "Dynamic"- or "Static overlay lines" system, -|an output NTSC video signal, -|a voltage of 6,5|V or more, -|an illuminance of 0,5|lux or more
Cameras using MIPI electrical interface with: -|an image sensor, -|an objective (lens), -|a colour processor, -|a flexible printed circuit board or a printed circuit board, -|whether or not capable of receiving audio signals, -|a module dimension of not more than 15mm x 15mm x 15mm , -|a resolution of 2|mega pixel or more (1616*1232|pixels and higher), -|whether or not wired, and -|a housing for use in the manufacture of products falling within subheading 8517|12|00|or 8471|30|00
Long wavelength infrared camera (LWIR camera) (according to ISO/TS 16949), with: -|a sensitivity in the wavelength area of 7,5|μm or more, but not more than 17|μm, -|a resolution of up to 640|!x!|512|pixels, -|a weight of not more than 400|g, -|measurements of not more than 70|mm|!x! 86|mm|!x! 82|mm, -|whether or not in a housing -|with automotive- qualified plug and -|a deviation of the output signal over the entire work temperature range of not more than 20|%
Other
Digital cameras
Video camera recorders
Only able to record sound and images taken by the television camera
Camera: -|of a weight of not more than 5,9|kg, -|without a housing, -|of dimensions of not more than 405|mm|!x! 315|mm, -|with a single Charge-Couple-Device (CCD) or Complementary Metal Oxide Semiconductor (CMOS) sensor, -|with effective pixels of not more than 5|megapixels, for use in closed circuit television (CCTV) surveillance systems or in appliances for eye-checks
Other
Other
Radar apparatus, radio navigational aid apparatus and radio remote control apparatus
Radar apparatus
For use in civil aircraft
Other
Other
Radio navigational aid apparatus
Radio navigational receivers
For use in civil aircraft
Assembly for GPS system having a position determination function, without display, and a weight of not more than 2 500|g
Integrated audio module (IAM) with a digital video output for connection to an LCD touch screen monitor, interfaced over the Media Oriented Systems Transport (MOST) network and transported over the MOST High protocol, with or without -|a printed circuit board (PCB) containing a Global Positioning System (GPS) receiver, a gyroscope, and a Traffic Message Channel (TMC) tuner, -|a hard disk drive supporting multiple maps, -|a HD radio, -|a voice recognition system, -|a CD and DVD drive, and including -|Bluetooth, MP3|and USB input connectivity, -|a voltage of 10|V or more but not more than 16|V, for the use in the manufacture of vehicles in Chapter 87
Other
Other
For use in civil aircraft
Other
Radio remote control apparatus
For use in civil aircraft
Other
Reception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock
Radio-broadcast receivers capable of operating without an external source of power
Pocket-size radio cassette players
With an analogue and digital reading system
Other
Other apparatus combined with sound recording or reproducing apparatus
With laser reading system
Other
Of the cassette-type with an analogue and digital reading system
Other
Other
Radio-broadcast receivers not capable of operating without an external source of power, of a kind used in motor vehicles
Combined with sound recording or reproducing apparatus
Capable of receiving and decoding digital radio data system signals
With laser reading system
Other
Of the cassette-type with an analogue and digital reading system
Other
Other
With laser reading system
Other
Of the cassette-type with an analogue and digital reading system
Other
Other
Integrated audio module (IAM) with a digital video output for connection to an LCD touch screen monitor, interfaced over the Media Oriented Systems Transport (MOST) network and transported over the MOST High protocol, with or without -|a printed circuit board (PCB) containing a Global Positioning System (GPS) receiver, a gyroscope, and a Traffic Message Channel (TMC) tuner, -|a hard disk drive supporting multiple maps, -|a HD radio, -|a voice recognition system, -|a CD and DVD drive, and including -|Bluetooth, MP3|and USB input connectivity, -|a voltage of 10|V or more but not more than 16|V, for the use in the manufacture of vehicles in Chapter 87
Other
Other
Combined with sound recording or reproducing apparatus
Within the same housing one or more loudspeakers
Of the cassette-type with an analogue and digital reading system
Other
Other
With laser reading system
Other
Of the cassette-type with an analogue and digital reading system
Other
Assembly consisting of at least: -|an audio frequency amplifier unit, |comprising at least an audio frequency amplifier and a sound generator, -|a transformer and -|a radio broadcast receiver |for use in the manufacture of consumer electronic products
Other
Not combined with sound recording or reproducing apparatus but combined with a clock
Alarm clock radios
Other
Other
Printed circuit board assembly comprising: -|a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities, -|a microprocessor capable of receiving remote control messages and controlling the tuner chipset, for use in the manufacture of home entertainment systems
Printed circuit board subassembly, comprising: -|a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly,|with a signal decoder, -|a radio frequency|(RF) remote control receiver, -|an infrared remote control signal transmitter, -|a SCART signal generator -|a TV state sensor for use in the manufacture of home entertainment systems
Other
Monitors and projectors, not incorporating television reception apparatus; reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus
Cathode-ray tube monitors
Of a kind solely or principally used in an automatic data-processing system of heading|8471
For use in civil aircraft
Other
Other
Monochrome
Video monitor comprising: -|a flat screen monochrome cathode-ray tube with a diagonal measurement of the screen of not more than 110|mm and equipped with a deflector yoke, and -|a printed circuit on which are mounted a deflection unit, a video-amplifier and a transformer, the whole mounted or not on a chassis, for the manufacture of video entry-phones, video telephones or surveillance apparatus
Other
Colour
Other monitors
Of a kind solely or principally used in an automatic data-processing system of heading|8471
For use in civil aircraft
Other
Other
Flat panel displays able to display signals from automatic data-processing machines with an acceptable level of functionality
Monochrome
Colour
With a screen of the liquid crystal display (LCD) technology
Other
Other
Liquid crystal display colour video monitors, excluding those combined with other apparatus, having a DC input voltage of 7|V or more but not more than 30|V, with a diagonal measurement of the screen of 33,2|cm or less, -|without a housing, with back cover and mounting frame, -|or with a housing, used|for permanent incorporation|or|permanent|mounting, during industrial assembly, into goods of Chapters 84|to 90|and 94
Liquid crystal display colour video monitor assembly mounted on a frame, -|excluding those combined with other apparatus, -|comprising touch screen facilities, a printed circuit board with drive circuitry and power supply, used for permanent incorporation or permanent mounting into entertainment systems for vehicles
Other
Projectors
Of a kind solely or principally used in an automatic data-processing system of heading|8471
For use in civil aircraft
Other
Other
Operating by means of flat panel display (for example, a liquid crystal device), capable of displaying digital information generated by an automatic data-processing machine
Other
Monochrome
Colour
Video projector consisting of three cathode-ray tubes each with a lens, for use in certain types of aircraft
Other
Reception apparatus for television, whether or not incorporating radio-broadcast receivers or sound or video recording or reproducing apparatus
Not designed to incorporate a video display or screen
Video tuners
Electronic assemblies for incorporation into automatic data-processing machines
Apparatus with a microprocessor-based device incorporating a modem for gaining access to the Internet, and having a function of interactive information exchange, capable of receiving television signals (so-called 'set-top boxes which have a communication function', including those incorporating a device performing a recording or reproducing function, provided that they retain the essential character of a set top box which has a communication function)
Other
Other
Apparatus with a microprocessor-based device incorporating a modem for gaining access to the Internet, and having a function of interactive information exchange, capable of receiving television signals (so-called 'set-top boxes which have a communication function', including those incorporating a device performing a recording or reproducing function, provided that they retain the essential character of a set top box which has a communication function)
Other
Other, colour
Television projection equipment
Apparatus incorporating a video recorder or reproducer
Other
With integral tube
With a screen of the liquid crystal display (LCD) technology
With a screen of the plasma display panel (PDP) technology
Other
Other, monochrome
Parts suitable for use solely or principally with the apparatus of headings|8525|to 8528
Aerials and aerial reflectors of all kinds; parts suitable for use therewith
Aerials
Telescopic and whip-type aerials for portable apparatus or for apparatus for fitting in motor vehicles
Outside aerials for radio or television broadcast receivers
For reception via satellite
Other
Inside aerials for radio or television broadcast receivers, including built-in types
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Aerial filters and separators
For use in civil aircraft
Ceramic filter package comprising 2|ceramic filters and 1|ceramic resonator for a frequency of 10,7|MHz (±30|kHz), contained in a housing
Ceramic filter for a centre frequency of 450|kHz (±1,5|kHz) or 455|kHz (±1,5|kHz), with a bandwidth of not more than 30|kHz at 6|dB and not more than 70|kHz at 40|dB, contained in a housing
Filters, excluding surface acoustic wave filters, for a center frequency of 485|MHz or more but not more than 1|990|MHz with an insertion loss of not more than 3,5|dB, contained in a housing
Ceramic filters -|with an applicable frequency range of 10|kHz or more but no more than 100|MHz -|with a housing of ceramic plates provided with electrodes of a kind used in electrical-mechanical transducer or resonator in audio visual and communication equipment
Other
Other
For use in civil aircraft
Other
Other
Parts of apparatus of subheadings|8525|60|00, 8525|80|30, 8528|41|00, 8528|51|00|and 8528|61|00
Other
Cabinets and cases
Of wood
Of other materials
Electronic assemblies
Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for apparatus of heading|8526, for use in civil aircraft
Electronic assembly comprising at least -|a printed circuit -|processors for multi-media applications and video signal processing -|FPGA (Field Programmable Gate Array) -|Flash memory -|operating|memory -|HDMI, VGA, USB and RJ-45|interfaces -|sockets and plugs for connecting a LCD-monitor, a LED lighting and a control panel
Of other transmitter-receivers excluding VHF radio communication transmitter-receivers complying with standard ARINC|566|A, and on-board intercommunication systems complying with standard ARINC|306 or 412!1!- of receivers excluding radio-broadcasting or television apparatus and receivers for selective calling equipment (SELCAL) complying with standard ARINC|531 or 596!1!- Other, excluding receivers for OMEGA radio navigation systems complying with standard ARINC|580 or 599
Printed circuit board assembly comprising: -|a radio tuner (capable of receiving and decoding radio signals and transmitting those signals within the assembly) without signal processing capabilities, -|a microprocessor capable of receiving remote control messages and controlling the tuner chipset, for use in the manufacture of home entertainment systems
Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing
Printed circuit board subassembly, comprising: -|a radio tuner, capable of receiving and decoding radio signals and transmitting those signals within the assembly,|with a signal decoder, -|a radio frequency|(RF) remote control receiver, -|an infrared remote control signal transmitter, -|a SCART signal generator -|a TV state sensor for use in the manufacture of home entertainment systems
Satellite radio receiver module transforming satellite high frequency signals to digital audio coded signal, for use in the manufacture of|products falling within heading 8527
Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528
Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT|glass panel of a LCD module
Unit driver consisting of an electronic integrated circuit and a flexible printed circuit, for use in the manufacture of LCD modules
Modules comprising at least semiconductor chips for: •the generation of driving signals for pixel addressing, or •driving addressing pixels
Tuner transforming high-frequency signals into digital signal, for use in the manufacture of products falling under heading|8527
Assembly consisting of at least: -|an audio frequency amplifier unit, |comprising at least an audio frequency amplifier and a sound generator, -|a transformer and -|a radio broadcast receiver |for use in the manufacture of consumer electronic products
Other
Other
For television cameras of subheadings|8525|80|11|and 8525|80|19|and apparatus of headings|8527|and 8528
Of other transmitter-receivers excluding VHF radio communication transmitter-receivers complying with standard ARINC|566|A, and on-board intercommunication systems complying with standard ARINC|306 or 412!1!- of receivers excluding radio-broadcasting or television apparatus and receivers for selective calling equipment (SELCAL) complying with standard ARINC|531 or 596!1!- Other, excluding receivers for OMEGA radio navigation systems complying with standard ARINC|580 or 599
LCD modules, -|solely consisting of one or more TFT glass or plastic cells, -|not combined with touch screen facilities, -|with one or more printed circuits boards with control electronics for pixel addressing only, -|with or without backlight unit and -|with or without inverters
Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for apparatus of heading|8526, for use in civil aircraft
LCD modules, not combined with touch screen facilities, solely consisting of: -|one or more TFT glass or plastic cells, -|a die cast heat sink, -|a backlight unit, -|one printed circuit board with micro controller, and -|LVDS (Low Voltage Differential Signalling) interface, for use in the manufacture of radios for motor vehicles
Holder, fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players
Optical unit for video projection, comprising a colour separation system, a positioning mechanism and lenses, for use in the manufacture of products falling within heading|8528
LCD modules with: -|a diagonal measurement of the screen of 14,5|cm or more but not more than 25,5|cm, -|a LED backlight, -|a printed circuit board with EPROM, microcontroller, timing controller, LIN bus driver module and other active and passive components, -|an 8|pin|plug for power supply and 4- pin LVDS interface, -|whether or not in a housing, for permanent incorporation or permanent mounting into motor vehicles of chapter 87
LCD module with: -|a diagonal measurement of the screen of 14,5|cm or more but not more than 20,3|cm, -|or without a touch screen, -|an LED backlight, -|a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components, -|a 12|pin|plug for power supply and CAN and LVDS interfaces, -|in a housing with monitor and other control functions, suitable for installation in motor vehicles of chapter 87
Fastening and covering ledges of aluminium alloy containing: -|silicon and magnesium, -|with a length of 300|mm or more but not more than 2|200|mm, specifically shaped for use in the manufacture of TV sets
Assembly comprising prisms, digital micromirror device (DMD) chips and electronic control circuits, for the manufacture of television projection equipments or video projectors
Digital micromirror device (DMD)-chips, for use in the manufacture of video projectors
Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527|or 8528
Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply
Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats
Area image sensors ("progressive scan" Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of|analogue or digital, monolithic integrated circuit|with pixels of| not more than 12|µm|!x!|12|µm in monochromic version with|microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel
AC socket with a noise filter, composed of: -|AC socket (for power cord connection) of 230|V, -|integrated noise filter composed of capacitors and inductors, -|cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit, whether or not equipped with a metal support, which joins the AC socket to the PDP TV set
Colour LCD display panel for LCD monitors of heading 8528: •with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm, •with backlight, micro-controller, •with a CAN (Controller area network)-controller with LVDS (Low-voltage differential signalling) interface and CAN/power supply socket or with an APIX (Automotive Pixel Link) controller with APIX interface, •in a housing with or without a heat sink at the back of the housing, •without a signal-processing module, for use in the manufacture of vehicles of chapter 87
OLED modules, consisting of one or more TFT glass or plastic cells, containing organic material, not combined with touch screen facilities|and one or more printed circuit boards with control electronics for pixel addressing, of a kind used in the manufacture of TV sets and monitors
OLED display consisting of: -|the organic layer with organic LEDs, -|two conductive layers on electron transfer and electron holes, -|layers of transistors (TFT) with| resolution of a 1920|x 1080 -|anode and cathode for power supply of organic diodes, -|RGB filter, -|glass or plastic protective layer, -|without the electronics for pixel addressing, for use in the manufacture of goods of headings 8528
Rectangular fastening and covering frame: -|of an aluminium alloy containing silicon and magnesium, -|with a length of 500|mm or more but not more than 2|200|mm, -|with a width of 300|mm or more but not more than 1|500|mm, of a kind used for the production of TV sets
Printed circuit board with LED diodes: - whether or not equipped with prisms/lens, and - whether or not fitted with connector(s) for the manufacture of backlight units for goods of heading|8528
Colour LCD module in a housing: -|with a diagonal screen measurement of 14.48|cm or more but not more than 26|cm, -|without touch screen, -|with a backlight and micro-controller, -|with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector, -|without a signal processing module, -|with control electronics for pixel addressing only, -|with a motorised mechanism for moving the display screen, for permanent installation in vehicles of Chapter 87
Light-Emitting Diode (LED) backlights modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlights illumination for liquid crystal displays (LCDs)
Other
Other
Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for apparatus of heading|8526, for use in civil aircraft
Of other transmitter-receivers excluding VHF radio communication transmitter-receivers complying with standard ARINC|566|A, and on-board intercommunication systems complying with standard ARINC|306 or 412!1!- of receivers excluding radio-broadcasting or television apparatus and receivers for selective calling equipment (SELCAL) complying with standard ARINC|531 or 596!1!- Other, excluding receivers for OMEGA radio navigation systems complying with standard ARINC|580 or 599
Light-Emitting Diode (LED) backlights modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlights illumination for liquid crystal displays (LCDs)
Organic light emitting diode modules and organic light emitting diode panels for the apparatus of subheadings 8528 72 or 8528 73
Other
Electrical signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields (other than those of heading|8608)
Equipment for railways or tramways
Other equipment
Parts
Electric sound or visual signalling apparatus (for example, bells, sirens, indicator panels, burglar or fire alarms), other than those of heading|8512|or 8530
Burglar or fire alarms and similar apparatus
Of a kind used for buildings
Other
For use in civil aircraft
Other
Indicator panels incorporating liquid crystal devices (LCD) or light emitting diodes (LED)
Incorporating light emitting diodes (LED)
For use in civil aircraft
Other
Incorporating liquid crystal devices (LCD)
Incorporating active matrix liquid crystal devices (LCD)
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other apparatus
Flat panel display devices
For use in civil aircraft
Other
Other
For use in civil aircraft
Electro-accoustic transducer
Bells, buzzers, door chimes and similar
Other
Parts
Of apparatus of subheadings|8531|20|and 8531|80|20
Other
For use in certain type of aircraft
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Other
Electrical capacitors, fixed, variable or adjustable (pre-set)
Fixed capacitors designed for use in 50/60|Hz circuits and having a reactive power handling capacity of not less than 0,5|kvar (power capacitors)
Other fixed capacitors
Tantalum
Aluminium electrolytic
Ceramic dielectric, single layer
Ceramic dielectric, multilayer
Dielectric of paper or plastics
Other
Variable or adjustable (pre-set) capacitors
Parts
Electrical resistors (including rheostats and potentiometers), other than heating resistors
Fixed carbon resistors, composition or film types
Other fixed resistors
For a power handling capacity not exceeding 20|W
Other
Wirewound variable resistors, including rheostats and potentiometers
For a power handling capacity not exceeding 20|W
Other
Other variable resistors, including rheostats and potentiometers
For a power handling capacity not exceeding 20|W
Other
Parts
Printed circuits
Consisting only of conductor elements and contacts
Multilayer circuits
Other
With other passive elements
Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, fuses, lightning arresters, voltage limiters, surge suppressors, plugs and other connectors, junction boxes), for a voltage exceeding 1|000|V
Fuses
For use in certain types of aircraft
Other
Automatic circuit breakers
For a voltage of less than 72,5|kV
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Isolating switches and make-and-break switches
For a voltage of less than 72,5|kV
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Lightning arresters, voltage limiters and surge suppressors
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Printed circuit board in the form of plates consisting of isolating material with electrical connections and solder points, for use in the manufacture of back light units for LCD modules
Semiconductor module switch in a casing: -|consisting of an IGBT transistor chip and a diode chip on one or more lead frames, -|for a voltage of 1200|V
Other
Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuits (for example, switches, relays, fuses, surge suppressors, plugs, sockets, lamp holders and other connectors, junction boxes), for a voltage not exceeding 1|000|V; connectors for optical fibres, optical fibre bundles or cables
Fuses
For a current not exceeding 10|A
For use in certain types of aircraft
Other
For a current exceeding 10|A but not exceeding 63|A
For use in certain types of aircraft
Other
For a current exceeding 63|A
For use in certain types of aircraft
Other
Automatic circuit breakers
For a current not exceeding 63|A
For use in certain types of aircraft
Other
For a current exceeding 63|A
For use in certain types of aircraft
Other
Other apparatus for protecting electrical circuits
For a current not exceeding 16|A
For use in certain types of aircraft
Other
For a current exceeding 16|A but not exceeding 125|A
For use in certain types of aircraft
Other
Thermo-electric switch with a cut-off current of 50|A or more, comprising a snap action switch, for direct mounting on an electric motor coil, contained in a hermetically sealed housing
Other
For a current exceeding 125|A
For use in certain types of aircraft
Other
Relays
For a voltage not exceeding 60|V
For a current not exceeding 2|A
For use in certain types of aircraft
Other
For a current exceeding 2|A
For use in certain types of aircraft
Other
A power relay with: -|an electromechanical switching function, -|a load current of 3|amperes or more but not exceeding 16|amperes, -|a coil voltage of 5|volts or more but not exceeding 24|volts, -|a distance between the connector pins of the load circuit not more than 12,5|mm
Other
Other
For use in certain types of aircraft
Other
Relays with: -|a nominal voltage of 12|V DC -|an allowable voltage of not more than 16|V DC -|a coil resistance at 20|°C of 26, 7|Ohm (± 10|%) -|a pick-up voltage at 60|°C of not more than 8,5|V -|a drop-out voltage at 20|°C of 1|V or more -|a nominal operating power at 20|°C of 5,4|Watts -|a switching voltage of not more than 400|V DC -|a permanent current-carrying capacity of not more than 120|A for use in the manufacture of batteries for electric vehicles
Thermal relays contained in a hermetically sealed glass cartridge of not more than 35|mm in length excluding wires, with a maximum leakage rate of 10$-$6|cm$3|He/sec at one bar in the temperature range 0|ºC to 160|°C, to be incorporated into compressors for refrigerating equipment
Other
Other switches
Electronic AC switches consisting of optically coupled input and output circuits (insulated thyristor AC switches)
Electronic switches, including temperature protected electronic switches, consisting of a transistor and a logic chip (chip-on-chip technology)
Electromechanical snap-action switches for a current not exceeding 11|A
Other
For a voltage not exceeding 60|V
Push-button switches
For use in certain types of aircraft
Other
Switch of the printed circuit mount type, operating at a force of 4,9|N (±0,9|N), contained in a housing
Mechanical tact switch for connecting electronic circuits, operating at a voltage of not more than 60V and at a current strength of not more than 50mA, for use in the manufacture of products of headings 8521|or 8528
Mechanical switches for connecting electrical circuits, with: -|a voltage of 14,4|V or more but not more than 42|V, -|an amperage of 10|A or more but not more than 42|A, for use in the manufacture of machines falling within heading 8467
Other
Rotary switches
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Hall effect switch, comprising 1|magnet, 1|Hall effect sensor and 2|capacitors, contained in a housing with 3|connections
Devices, having adjustable controller and switching functions, comprising one ore more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing
Other
Other
For use in certain types of aircraft
Other
Mechanical speed governer switches for connecting electrical circuits, with: -|a voltage of 240|V or more but not more than 250|V, -|an amperage of 4|A or more but not more than 6|A, for use in the manufacture of machines falling within heading 8467
Mechanical switches for connecting electrical circuits, with: -|a voltage of 240|V or more but not more than 300|V, -|an amperage of 3|A or more but not more than 15|A, for use in the manufacture of machines falling within heading 8467
Semiconductor module switch in a casing: -|consisting of an IGBT transistor chip and a diode chip on one or more lead frames, -|for a voltage of 600|V
Switch unit for coaxial cable, comprising 3|electromagnetic switches, with a switching time of not more than 50|ms and an actuating current of not more than 500|mA at a voltage of 12|V
Devices, having adjustable controller and switching functions, comprising one ore more monolithic integrated circuits whether or not combined with semiconductor elements, mounted together on a leadframe and contained in a plastic housing
Mechanical push-button switch for connecting electronic circuits, operating at a voltage of 220|V or more but not more than 250|V and at a current strength of not more than 5|A, for use in the manufacture of products of headings 8521|or 8528
Other
Lamp holders, plugs and sockets
Lamp holders
Edison lamp holders
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Other
For coaxial cables
For printed circuits
Other
For use in certain types of aircraft
Other
SCART type connectors, built into a plastic or metal housing, with 21|pins in 2|rows, for use in the manufacture of products falling within headings 8521|and 8528
Electrical sockets and plugs with a length of not more than 12,7|mm or a diameter of not more than 10,8|mm, for use in the production of hearing aids and speech processors
Pitch connector for use in the manufacture of LCD television reception apparatus
Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least: -|a pulse transformer, including a wide-band ferrite core, -|a common mode coil, -|a resistor, -|a|capacitor, for use in the manufacture of products falling within headings 8521|or 8528
AC socket with a noise filter, composed of: -|AC socket (for power cord connection) of 230|V, -|integrated noise filter composed of capacitors and inductors, -|cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit, whether or not equipped with a metal support, which joins the AC socket to the PDP TV set
Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521|or 8528
Socket or plug, built into a plastic or metal housing, with no more than 96|pins, for use in the manufacture of products falling within headings 8521|or 8528
High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19|pins or 20|pins in 2|rows, for use in the manufacture of products falling within headings 8521|or 8528
D-Subminiature (D-sub) type socket or plug, built into a plastic or metal housing, with 15|pins in 3|rows, for use in the manufacture of products falling within headings 8521|or 8528
Secure Digital (SD), CompactFlash, "Smart Card" and "Common interface modules (cards)" female connectors and interfaces, of a kind used for soldering on printed circuit boards, for connecting electrical apparatus and circuits and switching or protecting electrical circuits with a voltage of not more than 1 000 V
Other
Connectors for optical fibres, optical fibre bundles or cables
Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521|or 8528
Other
Other apparatus
Prefabricated elements for electrical circuits
For use in certain types of aircraft
Other
Connections and contact elements for wire and cables
Wafer probers
Other
For use in certain types of aircraft
Other
Semiconductor chip housing in the form of a plastic frame containing a lead frame equipped with contact pads, for voltages of not more than 1|000|V
Rivet contacts -|of copper -|plated with silver nickel alloy AgNi10|or with silver containing by weight 11.2|% (± 1.0|%) of tin oxide and of indium oxide taken together -|with a thickness of the plating of 0,3|mm (-0/+0,015|mm)
Battery clamp of a kind used for motor vehicles of heading 8702, 8703, 8704 or 8711
Metallic stamped frame with connections
Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Secure Digital (SD) type memory card slot, push-push or push-pull type, for use in the manufacture of goods falling within headings 8521|or 8528
Other
Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading|8535|or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter|90, and numerical control apparatus, other than switching apparatus of heading|8517
For a voltage not exceeding 1|000|V
Numerical control panels with built-in automatic data-processing machine
For use in certain types of aircraft
Other
Other
Programmable memory controllers
For use in certain types of aircraft
Other
Data processing and evaluation vehicle dashboard control module, operating through the CAN - bus protocol, containing at least: •microprocessor relays, •a stepper motor, •Electrically Erasable Programmable Read-Only (EEPROM) memory, and •other passive components (such as connectors, diodes, voltage stabilizer, resistors, capacitors, transistors), with a voltage of 13,5 V
Fuse control module in a plastic housing with mounting brackets comprising: -|sockets with or without fuses, -|connecting ports, -|a printed circuit board with embedded microprocessor, micro switch and relay of a kind used in the manufacture of goods of chapter 87
Electronic control units, manufactured according to class 2|of IPC-A-610E standard, with at least: -|an AC power input of 208|V or more but not more than| 400|V, -|a logic power input of 24|V DC, -|an automatic circuit breaker, -|a main power switch, -|internal or external electrical connectors and cables, -|in a housing with dimension of 281|mm x 180|mm x 75|mm or more, but not more than 630|mm x 420|mm x 230|mm, of a kind used for manufacturing recycling or sorting machines
Other
Other
For use in certain types of aircraft
Other
Motor bridge ICs without programmable memory consisting of: -|one or more integrated circuits, not interconnected, on separate lead frames, -|also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars -|mounted in a plastic housing
Electronic control unit without memory, for a voltage of 12|V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing: -|2|rotary knobs -|27|or more pushbuttons -|LED lights -|2|integrated circuits for receiving and sending of control signals via the LIN-bus
Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of: -|a length of 50|mm or more, but not more than 120|mm, -|a width of 20|mm or more but not more than 40|mm, -|a height of 30|mm or more, but not more than 120|mm of a kind used|in the manufacture of goods of Chapter 87
Electronic control units, manufactured according to class 2|of IPC-A-610E standard, with at least: -|an AC power input of 208|V or more but not more than| 400|V, -|a logic power input of 24|V DC, -|an automatic circuit breaker, -|a main power switch, -|internal or external electrical connectors and cables, -|in a housing with dimension of 281|mm x 180|mm x 75|mm or more, but not more than 630|mm x 420|mm x 230|mm, of a kind used for manufacturing recycling or sorting machines
Electronic control unit BCM (Body Control Module) comprising -|plastic box with printed circuit board and metal holder, -|with voltage of 9V or more, but not more than 16V, -|able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder of a kind used in the manufacture of goods of Chapter 87
Touch-Sensitive Data Input Devices (so-called touch screens) without display capabilities, for incorporation into apparatus having a display, which function by detecting the presence and location of a touch within the display area
Electronic assembly consisting of: -|a microprocessor, -|light-emitting diode (LED) or liquid crystal display (LCD) indicators, -|electronic components mounted on a printed circuit, for use in the manufacture of built-in products of headings 8514|2080, 8516|5000|and 8516|6080
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Touch sensitive screen panel, consisting of a conductive grid between two glass or plastic plates or sheets, fitted with electric conductors and connectors
Electronic control units for a voltage of 12|V, for use in the manufacture of vehicle mounted temperature control systems
Unit consisting of two junction field effect transistors contained in a dual lead frame housing
Electronic circuit card without separate housing for actuating and controlling vacuum cleaner brushes|powered by not more than 300|W
Electronic circuit cards that -|are connected by wire or radio frequency to each other and the motor controller card, and -|regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program, -|whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)
Other
For a voltage exceeding 1|000|V
For a voltage exceeding 1|000|V but not exceeding 72,5|kV
For use in certain types of aircraft
Other
For a voltage exceeding 72,5|kV
For use in certain types of aircraft
Other
Parts suitable for use solely or principally with the apparatus of heading|8535, 8536|or 8537
Boards, panels, consoles, desks, cabinets and other bases for the goods of heading|8537, not equipped with their apparatus
For use in certain types of aircraft
Other
Other
For wafer probers of subheading|8536|90|20
Electronic assemblies
Other
Other
Electronic assemblies
For use in certain types of aircraft
Other
Interior antenna for a car door locking system, comprising: -|an antenna module in a plastic housing, -|a connection cable with a plug, -|at least two mounting brackets -|whether or not PCB including integrated circuits, diodes and transistors of a kind used in the manufacture of goods of CN heading 8703
Other
Other
For use in certain types of aircraft
Other
Polycarbonate or acrylonitrile butadiene styrene covers and cases for steering pad switches whether or not coated on the outside with a scratch resistant paint
Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint
Interior antenna for a car door locking system, comprising: -|an antenna module in a plastic housing, -|a connection cable with a plug, -|at least two mounting brackets -|whether or not PCB including integrated circuits, diodes and transistors of a kind used in the manufacture of goods of CN heading 8703
Part of an electrothermal fuse, consisting of a tin coated copper wire attached to a cylindrical casing, the exterior dimensions of which do not exceed 5|mm|!x!|48|mm
Copper base plate, of a kind used as a heatsink in the manufacture of IGBT modules containing more components than IGBT chips and diodes with a voltage of 650|V or more but not more than 1200|V
Other
Electric filament or discharge lamps, including sealed beam lamp units and ultraviolet or infra-red lamps; arc lamps
Sealed beam lamp units
For use in civil aircraft
Other
Other filament lamps, excluding ultraviolet or infra-red lamps
Tungsten halogen
Of a kind used for motorcycles or other motor vehicles
Other, for a voltage
Exceeding 100|V
Lamps for lighting, for use in certain types of aircraft
Other
Not exceeding 100|V
Lamps for lighting, for use in certain types of aircraft
Other
Other, of a power not exceeding 200|W and for a voltage exceeding 100|V
Reflector lamps
Lamps for lighting, for use in certain types of aircraft
Other
Other
Lamps for lighting, for use in certain types of aircraft
Other
Other
Of a kind used for motorcycles or other motor vehicles
Other, for a voltage
Exceeding 100|V
Lamps for lighting, for use in certain types of aircraft
Other
Not exceeding 100|V
Lamps for lighting, for use in certain types of aircraft
Other
Discharge lamps, other than ultraviolet lamps
Fluorescent, hot cathode
With double ended cap
Lamps for lighting, for use in certain types of aircraft
Other
Other
Lamps for lighting, for use in certain types of aircraft
Other
Mercury or sodium vapour lamps; metal halide lamps
Mercury or sodium vapour lamps
Metal halide lamps
Lamps for lighting, for use in certain types of aircraft
Other
Other
Lamps for lighting, for use in certain types of aircraft
Cold cathode (CCFL) or External Electrode (EEFL) fluorescent lamps, of a diameter of not more than 5mm and with a length of more than 120mm but not more than 1570mm
Cold-cathode fluorescent lamps (CCFLs) for backlighting of flat panel displays
Other
Ultraviolet or infra-red lamps; arc lamps
Arc lamps
Other
Parts
Lamp bases
Other
Thermionic, cold cathode or photocathode valves and tubes (for example, vacuum or vapour or gas filled valves and tubes, mercury arc rectifying valves and tubes, cathode ray tubes, television camera tubes)
Cathode ray television picture tubes, including video monitor cathode ray tubes
Colour
For use in certain types of aircraft
Other
Colour cathode-ray tube equipped with electron guns placed side by side (in-line technology), with a diagonal measurement of the screen of 79 cm or more
Other
Monochrome
For use in certain types of aircraft
Other
Television camera tubes; image converters and intensifiers; other photocathode tubes
Television camera tubes
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Photomultiplier
Other
Data/graphic display tubes, monochrome; data/graphic display tubes, colour, with a phosphor dot screen pitch smaller than 0,4|mm
For use in certain types of aircraft
Other
Other cathode ray tubes
For use in certain types of aircraft
Other
Microwave tubes (for example, magnetrons, klystrons, travelling-wave tubes, carcinotrons), excluding grid-controlled tubes
Magnetrons
For use in certain types of aircraft
Continuous wave magnetron with a fixed frequency of 2|460|MHz, packaged magnet, probe output, for use in the manufacture of products falling within subheading 8516|50|00
Other
Other
For use in certain types of aircraft
Other
Other valves and tubes
Receiver or amplifier valves and tubes
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300|mm|!x!|350|mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons
Vacuum fluorescent display tube
Other
Parts
Of cathode ray tubes
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Diodes, transistors and similar semiconductor devices; photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light-emitting diodes; mounted piezoelectric crystals
Diodes, other than photosensitive or light-emitting diodes
Transistors, other than photosensitive transistors
With a dissipation rate of less than 1|W
Other
Thyristors, diacs and triacs, other than photosensitive devices
Photosensitive semiconductor devices, including photovoltaic cells whether or not assembled in modules or made up into panels; light-emitting diodes
Light-emitting diodes, including laser diodes
Other
Solar chargers that consist of less than six cells, are portable and supply electricity to devices or charge batteries; thin film photovoltaic products; crystalline silicon photovoltaic products that are permanently integrated into electrical goods, where the function of the electrical goods is other than power generation, and where these electrical goods consume the electricity generated by the integrated crystalline silicon photovoltaic cell(s); modules or panels with a output voltage not exceeding 50 V DC and a power output not exceeding 50 W solely for direct use as battery chargers in systems with the same voltage and power characteristics
Other
Crystalline silicon photovoltaic modules or panels
Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)
Consigned from Malaysia
Consigned from Taiwan
Other
Cells of the type used in crystalline silicon photovoltaic modules or panels with a thickness of the cells not exceeding 400 μm
Consigned from the People's Republic of China, unless the products are in transit in the sense of Article V GATT (http://www.wto.org/english/docs_e/legal_e/gatt47_01_e.htm)
Consigned from Malaysia
Consigned from Taiwan
Other
Other
Other semiconductor devices
Mounted piezoelectric crystals
Parts
Electronic integrated circuits
Electronic integrated circuits
Processors and controllers, whether or not combined with memories, converters, logic circuits, amplifiers, clock and timing circuits, or other circuits
Goods specified in note|8(b)(3) to this chapter
Other
Memories
Goods specified in note|8(b)(3) to this chapter
Other
Dynamic random-access memories (D-RAMs)
With a storage capacity not exceeding 512|Mbits
With a storage capacity exceeding 512|Mbits
Static random-access memories (S-RAMs), including cache random-access memories (cache-RAMs)
UV erasable, programmable, read only memories (EPROMs)
Electrically erasable, programmable, read only memories (E$2PROMs), including flash E$2PROMs
Flash E$2PROMs
With a storage capacity not exceeding 512|Mbits
With a storage capacity exceeding 512|Mbits
Other
Other memories
Amplifiers
Other
Goods specified in note|8(b)(3) to this chapter
Other
Parts
Electrical machines and apparatus, having individual functions, not specified or included elsewhere in this chapter
Particle accelerators
Signal generators
Machines and apparatus for electroplating, electrolysis or electrophoresis
Electroplating and electrolysis machines of a kind used solely or principally for the manufacture of printed circuits
Other
Other machines and apparatus
Electrical machines with translation or dictionary functions
Aerial amplifiers
Sunbeds, sunlamps and similar suntanning equipment
Electric fence energisers
Other
Plasma cleaner machines that remove organic contaminants from electron microscopy specimens and specimen holders
Touch-Sensitive Data Input Devices (so-called touch screens) without display capabilities, for incorporation into apparatus having a display, which function by detecting the presence and location of a touch within the display area
Flight recorders, electric synchros and transducers, defrosters and demisters with electric resistors, for use in civil aircraft
Articles specifically designed for connection to telegraphic or telephonic apparatus or instruments or to telegraphic or telephonic networks
Microwave amplifiers
Cordless infrared remote control devices for video game consoles
Digital flight-data recorders
Engine pressure indicators, for use in certain types of aircraft
Portable battery operated electronic reader for recording and reproducing text, still image or audio file
Digital signal processing apparatus capable of connecting to a wired or wireless network for the mixing of sound
Portable interactive electronic education devices primarily designed for children
Unit consisting of two junction field effect transistors contained in a dual lead frame housing
Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing
Radio frequency (RF) modulator, operating with a frequency range of 43|MHz or more but not more than 870|MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing
High-frequency amplifier comprising one or more integrated circuits and discrete capacitor chips on a metal flange in a housing
Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8|MHz to 67|MHz, contained in a housing
Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2|photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing
Oscillator, with a centre frequency of 20|GHz or more but not more than 42|GHz, consisting of active and passive elements not mounted on a substrate, contained in a housing
Voltage controlled frequency generator, consisting of active and passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30|x|30|mm
Audio recording and reproducing circuit, capable of stereo audio data storage and simultaneous record and playback, comprising 2|or 3|monolithic integrated circuits mounted on a printed circuit or a lead frame, contained in a housing
Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing
Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing
Mobile telephone view and control module comprising of: -|a mains power/ CAN (Controller area network) output socket, -|a Universal Serial Bus (USB) and Audio IN/OUT ports and -|incorporating a video switching device for the interface of smart phone operating systems with the Media Orientated Systems Transport network (MOST), for use in the manufacture of vehicles of chapter 87
Other
Parts
Assemblies and sub-assemblies consisting of two or more parts or pieces fastened or joined together, for flight recorders, for use in civil aircraft
Housings, housing parts, drums, setting wheels, frames, covers and other parts of acrylonitrile-butadiene-styrene of a kind used for the manufacture of remote controls
Stainless steel cathode in the form of a plate with a hanger bar, whether or not with plastic side strips
Assembly of products falling within heading|8541|or 8542|mounted on a printed circuit, contained in a housing
Part of an electrolysis device, consisting of a pan of nickel equipped with a wire mesh of nickel, fixed via ribs of nickel, and a pan of titanium equipped with a wire mesh of titanium, fixed via ribs of titanium, of which both pans are fixed together back to back
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Other
Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectors
Winding wire
Of copper
Lacquered or enamelled
Other
Other
Coaxial cable and other coaxial electric conductors
PET/PVC insulated flexible cable with: -|a voltage of not more than 60|V, -|a current of not more than 1|A, -|a heat resistance of not more than 105|°C, -|individual wires of a thickness of not more than 0,1|mm (± 0,01|mm) and a width of not more than 0,8|mm (± 0,03|mm), -|a distance between conductors of not more than 0,5|mm and -|a pitch (distance from centreline to centreline of conductors) of not more than 1,25|mm
Antenna connecting cable for the transmission of analogue radio (AM/FM) and GPS signals, containing: -|a two-core coaxial cable, -|two or more connectors, -|5|or more plastic clips for attachment to the dashboard of kind used in the manufacture of goods of Chapter 87
Other
Ignition wiring sets and other wiring sets of a kind used in vehicles, aircraft or ships
For use in civil aircraft
Other
Multi-measurement wire harness of a voltage of 5V|or more but not more than 90|V capable of measuring some or all of the following; -|a travel speed|of not more than 24|km/h -|a motor speed|of not more than|4|500|rpm -|hydraulic pressure|of not more than|25|Mpa -|mass|of not more than|50|metric tonnes for use in the manufacture of vehicles|of heading 8427
Wire harness of the steering system with an operating voltage of 12|V, equipped with connectors on both sides, having at least 3|plastic anchor clamps for mounting on a motor vehicle steering box
Four-core connecting cable containing two female connectors| for the transmission of| digital signals from navigation and audio systems to a USB connector, of kind used in the manufacture of goods of Chapter 87
Multi-measurement wire harness: -|of a voltage of 5|V or more but not more than 90|V, -|capable of transmitting information for use in the manufacture of vehicles of heading 8711
Extension two-core cable with two connectors, containing at least: -|a rubber grommet, -|a plastic conduit, -|a metal attachment bracket of a kind used to connect vehicle speed sensors in the manufacture of vehicles of chapter 87
Other
Other electric conductors, for a voltage not exceeding 1|000|V
Fitted with connectors
Of a kind used for telecommunications
Other
Data transmission cable capable of a bit rate transmission of 600|Mbit/s or more, with: -|a voltage of 1,25|V|(±|0,25|V) -|connectors fitted at one or both ends, at least one of which contains pins with a pitch of|1|mm, -|outer screening shielding, used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits
PET/PVC insulated flexible cable with: -|a voltage of not more than 60|V, -|a current of not more than 1|A, -|a heat resistance of not more than 105|°C, -|individual wires of a thickness of not more than 0,1|mm (± 0,01|mm) and a width of not more than 0,8|mm (± 0,03|mm), -|a distance between conductors of not more than 0,5|mm and -|a pitch (distance from centreline to centreline of conductors) of not more than 1,25|mm
PET insulated electric conductor with: -|10|or 80|individual wires, -|a length of 50|mm or more, but not more than 800|mm, -|connector(s) and/or plug(s) fitted at one or both ends, for use in the manufacture of products falling within headings 8521|and 8528
Wire harness of the steering system with an operating voltage of 12|V, equipped with connectors on both sides, having at least 3|plastic anchor clamps for mounting on a motor vehicle steering box
Four-core connecting cable containing two female connectors| for the transmission of| digital signals from navigation and audio systems to a USB connector, of kind used in the manufacture of goods of Chapter 87
Extension two-core cable with two connectors, containing at least: -|a rubber grommet, -|a plastic conduit, -|a metal attachment bracket of a kind used to connect vehicle speed sensors in the manufacture of vehicles of chapter 87
Electric conductors: -|of a voltage of not more than 80|V, -|with a length of not more than 120|cm, -|fitted with connectors, for use in the manufacture of hearing aids, accessory kits and speech processors
Other
Other
Of a kind used for telecommunications, for a voltage not exceeding 80|V
Other
Wire and cables, with individual conductor wires of a diameter exceeding 0,51|mm
Insulated copper electrical wires: -|with individual conductor wires of a diameter exceeding 0,51|mm., -|for a voltage|of not more than|1|000|V, for use in the manufacture of automotive cable harnesses
Other
Other
For a voltage not exceeding 80|V
Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements
PET/PVC insulated flexible cable with: -|a voltage of not more than 60|V, -|a current of not more than 1|A, -|a heat resistance of not more than 105|°C, -|individual wires of a thickness of not more than 0,1|mm (± 0,01|mm) and a width of not more than 0,8|mm (± 0,03|mm), -|a distance between conductors of not more than 0,5|mm and -|a pitch (distance from centreline to centreline of conductors) of not more than 1,25|mm
Electric conductors: -|of a voltage of not more than 80|V, -|of a platinum-iridium-alloy, -|coated with poly(tetrafluoroethylene), -|without connectors, for use in the manufacture of hearing aids, implants and speech processors
Other
For a voltage exceeding 80|V but less than 1|000|V
For a voltage of 1|000|V
Other electric conductors, for a voltage exceeding 1|000|V
With copper conductors
With other conductors
Optical fibre cables
Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposes
Electrodes
Of a kind used for furnaces
Graphite electrodes of a kind used for electric furnaces, with an apparent density of 1,65 g/cm³ or more and an electrical resistance of 6.0 μΩ.m or less
Other
Other
Carbon electrodes, for use in the manufacture of zinc-carbon batteries
Other
Brushes
Other
Heating resistors
Other
Nipples used for graphite electrodes of a kind used for electric furnaces, with an apparent density of 1,65 g/cm³ or more and an electrical resistance of 6.0 μΩ.m or less
Carbon fibre paper of a kind used for gas diffusion layers in fuel cell electrodes
Roll of laminate foil of graphite and copper, with: -|a width of 610|mm or more but not more than 620|mm, and -|a diameter of 690|mm or more but not more than 710|mm,for use in the manufacture of lithium-ion electric vehicle batteries
Other
Electrical insulators of any material
Of glass
Of ceramics
Other
Of plastics
Other
Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly, other than insulators of heading|8546; electrical conduit tubing and joints therefor, of base metal lined with insulating material
Insulating fittings of ceramics
Insulated fitting of ceramics, containing by weight 90|% or more of aluminium oxide, metallised, in the form of a hollow cylindrical body of an external diameter of 20|mm or more but not more than 250|mm, for the manufacture of vacuum interrupters
Other
Insulating fittings of plastics
Polycarbonate or acrylonitrile butadiene styrene covers and cases for steering pad switches whether or not coated on the outside with a scratch resistant paint
Other
Other
Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators; electrical parts of machinery or apparatus, not specified or included elsewhere in this chapter
Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators
Spent primary cells, spent primary batteries
Spent electric accumulators
Lead-acid accumulators
Other
Spent lithium-ion or nickel metal hydride electric accumulators
Other
Waste and scrap of primary cells, primary batteries and electric accumulators
Containing lead
Other
Other
Memories in multicombinational forms such as stack D-RAMs and modules
Other
For use in certain types of aircraft
Other
Unit, consisting of a resonator operating within a frequency range of 1,8|MHz or more but not more than 40|MHz and a capacitor, contained in a housing
Contact image sensor
Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing
Optical unit, consisting at least of a laserdiode and a photodiode operating at a typical wavelength of 635|nm or more but not more than 815|nm
Filters with a ferromagnetic core, used to suppress high frequency noise in electronic circuits, for the manufacture of TV sets and monitors of heading 8528
LCD modules, -|solely consisting of one or more TFT glass or plastic cells, -|not combined with touch screen facilities, -|with one or more printed circuits boards with control electronics for pixel addressing only, -|with or without backlight unit and -|with or without inverters
LCD modules, -|solely consisting of one or more TFT glass or plastic cells, -|combined with touch screen facilities, -|with one or more printed circuits boards with control electronics for pixel addressing only, -|with or without backlight unit and -|with or without inverters
Light-Emitting Diode (LED) backlights modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlights illumination for liquid crystal displays (LCDs)
Other
RAILWAY OR TRAMWAY LOCOMOTIVES, ROLLING STOCK AND PARTS THEREOF; RAILWAY OR TRAMWAY TRACK FIXTURES AND FITTINGS AND PARTS THEREOF; MECHANICAL (INCLUDING ELECTROMECHANICAL) TRAFFIC SIGNALLING EQUIPMENT OF ALL KINDS
Rail locomotives powered from an external source of electricity or by electric accumulators
Powered from an external source of electricity
Powered by electric accumulators
Other rail locomotives; locomotive tenders
Diesel-electric locomotives
Other
Self-propelled railway or tramway coaches, vans and trucks, other than those of heading|8604
Powered from an external source of electricity
Other
Railway or tramway maintenance or service vehicles, whether or not self-propelled (for example, workshops, cranes, ballast tampers, trackliners, testing coaches and track inspection vehicles)
Railway or tramway passenger coaches, not self-propelled; luggage vans, post office coaches and other special purpose railway or tramway coaches, not self-propelled (excluding those of heading|8604)
Railway or tramway goods vans and wagons, not self-propelled
Tank wagons and the like
Self-discharging vans and wagons, other than those of subheading|8606|10
Other
Covered and closed
Specially designed for the transport of highly radioactive materials
Other
Open, with non-removable sides of a height exceeding 60|cm
Other
Parts of railway or tramway locomotives or rolling stock
Bogies, bissel-bogies, axles and wheels, and parts thereof
Driving bogies and bissel-bogies
Other bogies and bissel-bogies
Other, including parts
Axles, assembled or not; wheels and parts thereof
Parts of bogies, bissel-bogies and the like
Brakes and parts thereof
Air brakes and parts thereof
Of cast iron or cast steel
Other
Other
Hooks and other coupling devices, buffers, and parts thereof
Other
Of locomotives
Axle-boxes and parts thereof
Other
Other
Axle-boxes and parts thereof
Other
Railway or tramway track fixtures and fittings; mechanical (including electromechanical) signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoing
Containers (including containers for the transport of fluids) specially designed and equipped for carriage by one or more modes of transport
Containers with an anti-radiation lead covering, for the transport of radioactive materials
Other
VEHICLES OTHER THAN RAILWAY OR TRAMWAY ROLLING STOCK, AND PARTS AND ACCESSORIES THEREOF
Tractors (other than tractors of heading|8709)
Pedestrian-controlled tractors
Road tractors for semi-trailers
New
Used
Track-laying tractors
Other
Agricultural tractors (excluding pedestrian-controlled tractors) and forestry tractors, wheeled
New, of an engine power
Not exceeding 18|kW
Exceeding 18|kW but not exceeding 37|kW
Exceeding 37|kW but not exceeding 59|kW
Exceeding 59|kW but not exceeding 75|kW
Exceeding 75|kW but not exceeding 90|kW
Exceeding 90|kW
Used
Other
Motor vehicles for the transport of ten or more persons, including the driver
With compression-ignition internal combustion piston engine (diesel or semi-diesel)
Of a cylinder capacity exceeding 2|500|cm$3
New
Used
Of a cylinder capacity not exceeding 2|500|cm$3
New
Used
Other
With spark-ignition internal combustion piston engine
Of a cylinder capacity exceeding 2|800|cm$3
New
Used
Of a cylinder capacity not exceeding 2|800|cm$3
New
Used
With other engines
Motor cars and other motor vehicles principally designed for the transport of persons (other than those of heading|8702), including station wagons and racing cars
Vehicles specially designed for travelling on snow; golf cars and similar vehicles
Vehicles specially designed for travelling on snow, with compression-ignition internal combustion piston engine (diesel or semi-diesel), or with spark-ignition internal combustion piston engine
Other
Other vehicles, with spark-ignition internal combustion reciprocating piston engine
Of a cylinder capacity not exceeding 1|000|cm$3
New
Used
Of a cylinder capacity exceeding 1|000|cm$3|but not exceeding 1|500|cm$3
New
Used
Of a cylinder capacity exceeding 1|500|cm$3|but not exceeding 3|000|cm$3
New
Motor caravans
Other
Used
Of a cylinder capacity exceeding 3|000|cm$3
New
Used
Other vehicles, with compression-ignition internal combustion piston engine (diesel or semi-diesel)
Of a cylinder capacity not exceeding 1|500|cm$3
New
Used
Of a cylinder capacity exceeding 1|500|cm$3|but not exceeding 2|500|cm$3
New
Motor caravans
Other
Used
Of a cylinder capacity exceeding 2|500|cm$3
New
Motor caravans
Other
Used
Other
With electric motors
Other
Motor vehicles for the transport of goods
Dumpers designed for off-highway use
With compression-ignition internal combustion piston engine (diesel or semi-diesel), or with spark-ignition internal combustion piston engine
Other
Other, with compression-ignition internal combustion piston engine (diesel or semi-diesel)
Of a gross vehicle weight not exceeding 5|tonnes
Specially designed for the transport of highly radioactive materials
Other
With engines of a cylinder capacity exceeding 2|500|cm$3
New
Used
With engines of a cylinder capacity not exceeding 2|500|cm$3
New
Used
Of a gross vehicle weight exceeding 5|tonnes but not exceeding 20|tonnes
Specially designed for the transport of highly radioactive materials
Other
New
Used
Of a gross vehicle weight exceeding 20|tonnes
Specially designed for the transport of highly radioactive materials
Other
New
Motor chassis with a self-ignition capacity of at least 8 000 cm³, fitted with a cabin on either 3, 4 or 5 wheels having a wheelbase of at least 480 cm, not containing working machinery, to be built into special purpose motor vehicles with a width of at least 300 cm
Other
Used
Other, with spark-ignition internal combustion piston engine
Of a gross vehicle weight not exceeding 5|tonnes
Specially designed for the transport of highly radioactive materials
Other
With engines of a cylinder capacity exceeding 2|800|cm$3
New
Used
With engines of a cylinder capacity not exceeding 2|800|cm$3
New
Used
Of a gross vehicle weight exceeding 5|tonnes
Specially designed for the transport of highly radioactive materials
Other
New
Used
Other
Special purpose motor vehicles, other than those principally designed for the transport of persons or goods (for example, breakdown lorries, crane lorries, fire fighting vehicles, concrete-mixer lorries, road sweeper lorries, spraying lorries, mobile workshops, mobile radiological units)
Crane lorries
Mobile drilling derricks
Fire fighting vehicles
Concrete-mixer lorries
Other
Concrete-pumping vehicles
Other
Chassis fitted with engines, for the motor vehicles of headings|8701|to 8705
Chassis for tractors of heading|8701; chassis for motor vehicles of heading|8702, 8703|or 8704, with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity exceeding 2|800|cm$3
For vehicles of heading|8702|or 8704
Other
Other
For vehicles of heading|8703
Other
Bodies (including cabs), for the motor vehicles of headings|8701|to 8705
For the vehicles of heading|8703
For industrial assembly purposes
Other
Other
For the industrial assembly of: Pedestrian-controlled tractors of subheading|8701|10; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Special purpose motor vehicles of heading|8705
Other
Parts and accessories of the motor vehicles of headings|8701|to 8705
Bumpers and parts thereof
For the industrial assembly of: Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Other
Other parts and accessories of bodies (including cabs)
Safety seat belts
For the industrial assembly of: Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Metal casing for automobile|safety belt pre-tension gas generators
Other
Other
Metal casing for automobile|safety belt pre-tension gas generators
Other
Other
For the industrial assembly of: Pedestrian-controlled tractors of subheading|8701|10; Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Other
Plastic cover of the exterior rear-view mirror for motor vehicles with clips
Other
Brakes and servo-brakes; parts thereof
For the industrial assembly of: Pedestrian-controlled tractors of subheading|8701|10; Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Motor powered brake actuation unit -|with a rating of 13.5|V (±0.5V) and -|a ball screw mechanism to control brake fluid pressure in the master cylinder for use in the manufacture of electric motor vehicles
Other
Other
For disc brakes
Drum type parking brake: -|operating within the service brake disk, -|with a diameter of 170|mm or more but not more than 175|mm, for use in the manufacture of motor vehicles
Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87
Body of disc type brake in BIR ("Ball in Ramp") or EPB ("Electronic Parking Brake") version containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 87
Ductile cast iron brake caliper jaw, of a |kind used in the manufacture of goods of Chapter 87
Other
Other
Gear boxes and parts thereof
For the industrial assembly of: Pedestrian-controlled tractors of subheading|8701|10; Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Other
Gear boxes
Automatic hydrodynamic gearbox with a hydraulic torque converter without transfer box, cardan shaft and front differential for use in the manufacture of motor vehicles of Chapter 87
Other
Parts
Of closed-die forged steel
Other
Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof
For the industrial assembly of: Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Other
Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles
Parts
Of closed-die forged steel
Car axle side-shaft fitted with a constant velocity joint at each end, of a kind used in the manufacture of goods of CN heading 8703
Other
Other
For non-driving axles
Other
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle -|of a length of| 1|m or more but not more than 2|m, -|of a weight of 6|kg or more but not more than 9|kg
Other
Road wheels and parts and accessories thereof
For the industrial assembly of: Pedestrian-controlled tractors of subheading|8701|10; Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres
Other
Other
Wheels of aluminium; parts and accessories of wheels, of aluminium
Wheels of aluminium, whether or not with their accessories and whether or not fitted with tyres
Other
Wheel centres in star form, cast in one piece, of iron or steel
Other
Suspension systems and parts thereof (including shock-absorbers)
For the industrial assembly of: Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Other
Suspension shock-absorbers
Upper strut insulator containing -|a metal holder with three mounting screws, and -|a rubber bump of a kind used in the manufacture of goods of Chapter 87
Other
Anti roll bars; other torsion bars
Other
Of closed-die forged steel
Rear chassis arm with a protective plastic label equipped with two metal casings with pressed-in rubber silent blocks, of kind used in the manufacture of goods of Chapter 87
Rear chassis arm equipped with a ball pivot and metal casing with a pressed-in rubber silent block, of kind used in the manufacture of goods of Chapter 87
Other
Other
Other parts and accessories
Radiators and parts thereof
For the industrial assembly of: Pedestrian-controlled tractors of subheading|8701|10; Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Other
Radiators
Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 87
Other
Parts
Of closed-die forged steel
Other
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Aluminium alloy inlet or outlet air tank manufactured to standard EN AC 42100|with: -|an insulating area flatness of not more than 0,1|mm, -|a permissible particle quantity of 0,3|mg per tank, -|a distance between pores of 2|mm or more, -|pore sizes of not more than 0,4|mm, and -|not more than 3|pores larger than 0,2mm of a kind used in heat exchangers for car cooling systems
Other
Silencers (mufflers) and exhaust pipes; parts thereof
For the industrial assembly of: Pedestrian-controlled tractors of subheading|8701|10; Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Other
Silencers (mufflers) and exhaust pipes
Parts
Of closed-die forged steel
Other
Clutches and parts thereof
For the industrial assembly of: Pedestrian-controlled tractors of subheading|8701|10; Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Other
Steering wheels, steering columns and steering boxes; parts thereof
For the industrial assembly of: Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Other
Steering wheels, steering columns and steering boxes
Rack steering gear in aluminium housing with homokinetic hinges of a kind used in the manufacture of goods of Chapter 87
Other
Parts
Of closed-die forged steel
Other
Safety airbags with inflator system; parts thereof
For the industrial assembly of: Pedestrian-controlled tractors of subheading|8701|10; Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Inflatable safety cushion of high strength polyamide fibre -|sewn -|folded into three-dimensional packing form, fixed by thermal forming
Inflatable safety cushion| of high strength polyamide fibre: -|sewn, -|folded, -|with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing -|suitable for cool inflator technology
Other
Other
Of closed-die forged steel
Other
Front passenger airbag composed of: -|a metal housing with at least six mounting brackets, -|an embedded safety cushion, -|a cartridge filled with compressed gas of a kind used in the manufacture of goods of Chapter 87
Inflatable safety cushion of high strength polyamide fibre -|sewn -|folded into three-dimensional packing form, fixed by thermal forming
Inflatable safety cushion| of high strength polyamide fibre: -|sewn, -|folded, -|with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing -|suitable for cool inflator technology
Other
Other
For the industrial assembly of: Pedestrian-controlled tractors of subheading|8701|10; Vehicles of heading|8703; Vehicles of heading|8704|with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2|500|cm$3|or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2|800|cm$3; Vehicles of heading|8705
Other
Of closed-die forged steel
Other
Metal housing caps for incorporation into balancing-arms or spherical bearings used in the suspension systems for the front wheels of motor vehicles
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Aluminium engine bracket, with dimensions of: -height of more than 10 mm but not more than 200 mm -width of more than 10 mm but not more than 200 mm -length of more than 10 mm but not more than 200 mm equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics: -internal porosity not more than 1 mm; -outer porosity not more than 2 mm; -Rockwell hardness HRB 10 or more of a kind used in the production of suspensions systems for engines in motor vehicles
Other
Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles
Vehicles
Electrical
Specially designed for the transport of highly radioactive materials
Other
Other
Specially designed for the transport of highly radioactive materials
Other
Parts
Tanks and other armoured fighting vehicles, motorised, whether or not fitted with weapons, and parts of such vehicles
Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars
With reciprocating internal combustion piston engine of a cylinder capacity not exceeding 50|cm$3
With reciprocating internal combustion piston engine of a cylinder capacity exceeding 50|cm$3|but not exceeding 250|cm$3
Scooters
Other, of a cylinder capacity
Exceeding 50|cm$3|but not exceeding 125|cm$3
Exceeding 125|cm$3|but not exceeding 250|cm$3
With reciprocating internal combustion piston engine of a cylinder capacity exceeding 250|cm$3|but not exceeding 500|cm$3
Of a cylinder capacity exceeding 250|cm$3|but not exceeding 380|cm$3
Of a cylinder capacity exceeding 380|cm$3|but not exceeding 500|cm$3
With reciprocating internal combustion piston engine of a cylinder capacity exceeding 500|cm$3|but not exceeding 800|cm$3
With reciprocating internal combustion piston engine of a cylinder capacity exceeding 800|cm$3
Other
Cycles, with an auxiliary electric motor with a continuous rated power not exceeding 250|watts
Other
Bicycles and other cycles (including delivery tricycles), not motorised
Bicycles with ball bearings
Consigned from Indonesia, Malaysia, Sri Lanka or Tunisia
Consigned from Cambodia, Pakistan or the Philippines
Other
Other
Unicycles
Other
Consigned from Indonesia, Malaysia, Sri Lanka or Tunisia
Consigned from Cambodia, Pakistan or the Philippines
Other
Carriages for disabled persons, whether or not motorised or otherwise mechanically propelled
Not mechanically propelled
Other
Parts and accessories of vehicles of headings|8711|to 8713
Of motorcycles (including mopeds)
Brakes and parts thereof
Gear boxes and parts thereof
Road wheels and parts and accessories thereof
Silencers (mufflers) and exhaust pipes; parts thereof
Clutches and parts thereof
Other
Inner tubes, -|of SAE1541|carbon steel -|with a hard chromium layer of 20|µm (+15|µm/-5|µm) -|having a wall thickness of 1,45|mm or more, but not more than 1,5|mm -|having an elongation at break of 15|% -|slotted of a kind used for the production of motorcycle fork rods
Radiators of a kind used in motor bikes for fitting of attachments
Axle clamps, housings, fork bridges and clamping pieces, of aluminium alloy of a kind used for motor bikes
Pistons for steering dampers of sintered steel according to standard ISO P2054 of a kind used for motor bikes
Other
Of carriages for disabled persons
Other
Frames and forks, and parts thereof
Frames
Painted, anodised, polished and/or lacquered
Originating in or consigned from China: - in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month; or - to be transferred to another holder of an end-use authorisation or to exempted parties
Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles
Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles
Other
Other
Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles
Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles
Other
Other
Frame, constructed from aluminium or aluminium and carbon fibres, for the use in the manufacture of bicycles
Other
Front forks
Painted, anodised, polished and/or lacquered
Originating in or consigned from China: - in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month; or - to be transferred to another holder of an end-use authorisation or to exempted parties
Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles
Front forks with aluminium legs, for use in the manufacture of bicycles
Other
Other
Constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles
Front forks with aluminium legs, for use in the manufacture of bicycles
Other
Other
Front forks with aluminium legs, for use in the manufacture of bicycles
Other
Parts
Wheel rims and spokes
Rims
Spokes
Hubs, other than coaster braking hubs and hub brakes, and free-wheel sprocket-wheels
Free-wheel sprocket-wheels
Originating in or consigned from China: - in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month; or - to be transferred to another holder of an end-use authorisation or to exempted parties
Other
Other
Brakes, including coaster braking hubs and hub brakes, and parts thereof
Brakes
Coaster braking hubs and hub brakes
Other brakes
Originating in or consigned from China: - in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month; or - to be transferred to another holder of an end-use authorisation or to exempted parties
Other
Parts
Brake levers
Originating in or consigned from China: - in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month; or - to be transferred to another holder of an end-use authorisation or to exempted parties
Other
Other
Saddles
Pedals and crank-gear, and parts thereof
Pedals
Pedals, for use in the manufacture of bicycles
Other
Crank-gear
Originating in or consigned from China: - in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month; or - to be transferred to another holder of an end-use authorisation or to exempted parties
Other
Parts
Other
Handlebars
Originating in or consigned from China: - in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month; or - to be transferred to another holder of an end-use authorisation or to exempted parties
Other
Luggage carriers
Derailleur gears
Originating in or consigned from China: - in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month; or - to be transferred to another holder of an end-use authorisation or to exempted parties
Other
Other; parts
Complete wheels with or without tubes, tyres and sprockets
Originating in or consigned from China: - in quantities below 300 units per month or to be transferred to a party in quantities below 300 units per month; or - to be transferred to another holder of an end-use authorisation or to exempted parties
Other
Seat posts, for use in the manufacture of bicycles
Other
Baby carriages and parts thereof
Baby carriages
Parts
Trailers and semi-trailers; other vehicles, not mechanically propelled; parts thereof
Trailers and semi-trailers of the caravan type, for housing or camping
Of a weight not exceeding 1|600|kg
Of a weight exceeding 1|600|kg
Self-loading or self-unloading trailers and semi-trailers for agricultural purposes
Other trailers and semi-trailers for the transport of goods
Tanker trailers and tanker semi-trailers
Other
Specially designed for the transport of highly radioactive materials
Other
New
Semi-trailers
Other
Used
Other trailers and semi-trailers
Other vehicles
Parts
Chassis
Bodies
Axles
Other parts
Aluminium road wheels of vehicles of CN heading 8716, whether or not with their accessories and whether or not fitted with tyres
Other
AIRCRAFT, SPACECRAFT, AND PARTS THEREOF
Balloons and dirigibles; gliders, hang gliders and other non-powered aircraft
Balloons and dirigibles; gliders and hang gliders
For civil use
Other
Other
For civil use
Other
Other aircraft (for example, helicopters, aeroplanes); spacecraft (including satellites) and suborbital and spacecraft launch vehicles
Helicopters
Of an unladen weight not exceeding 2|000|kg
For civil use
Other
Of an unladen weight exceeding 2|000|kg
For civil use
Other
Aeroplanes and other aircraft, of an unladen weight not exceeding 2|000|kg
For civil use
Other
Aeroplanes and other aircraft, of an unladen weight exceeding 2|000|kg but not exceeding 15|000|kg
For civil use
Other
Aeroplanes and other aircraft, of an unladen weight exceeding 15|000|kg
For civil use
Other
Spacecraft (including satellites) and suborbital and spacecraft launch vehicles
Spacecraft (including satellites)
Telecommunication satellites
Other
Suborbital and spacecraft launch vehicles
Parts of goods of heading|8801|or 8802
Propellers and rotors and parts thereof
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Undercarriages and parts thereof
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Other parts of aeroplanes or helicopters
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Connecting components for use in the production of helicopter tail rotor shafts
Pre-formed helicopter rotor shafts -|of circular cross-section, -|with a length|of 1|249,68|mm or more, but not more than 1|496,06|mm, -|of an external diameter of|81,356|mm or more, but not more than 82,2198|mm, -|swaged on both ends to an external diameter of 63,8683|mm or more, but not more than 66,802|mm, -|heat treated according to standards MIL-H-6088, AMS|2770|or AMS|2772
Other
Other
Of kites
Of spacecraft (including satellites)
Of telecommunication satellites
Other
Of suborbital and spacecraft launch vehicles
Other
For use in civil aircraft
Intended to be fitted in aircraft imported duty free or built within the Community
Other
Parachutes (including dirigible parachutes and paragliders) and rotochutes; parts thereof and accessories thereto
Aircraft launching gear; deck-arrestor or similar gear; ground flying trainers; parts of the foregoing articles
Aircraft launching gear and parts thereof; deck-arrestor or similar gear and parts thereof
Aircraft launching gear and parts thereof
Other
Ground flying trainers and parts thereof
Air combat simulators and parts thereof
Other
For use in civil aircraft
Other
SHIPS, BOATS AND FLOATING STRUCTURES
Cruise ships, excursion boats, ferry-boats, cargo ships, barges and similar vessels for the transport of persons or goods
Cruise ships, excursion boats and similar vessels principally designed for the transport of persons; ferry-boats of all kinds
Seagoing
Other
Tankers
Seagoing
Other
Refrigerated vessels, other than those of subheading|8901|20
Seagoing
Other
Other vessels for the transport of goods and other vessels for the transport of both persons and goods
Seagoing
Other
Fishing vessels; factory ships and other vessels for processing or preserving fishery products
Seagoing
Other
Yachts and other vessels for pleasure or sports; rowing boats and canoes
Inflatable
Of a weight not exceeding 100|kg each
Other
Other
Sailboats, with or without auxiliary motor
Seagoing
Other
Motor boats, other than outboard motor boats
Seagoing
Other
Of a length not exceeding 7,5|m
Of a length exceeding 7,5|m
Other
Of a weight not exceeding 100|kg each
Other
Of a length not exceeding 7,5|m
Of a length exceeding 7,5|m
Tugs and pusher craft
Tugs
Pusher craft
Seagoing
Other
Light-vessels, fire-floats, dredgers, floating cranes, and other vessels the navigability of which is subsidiary to their main function; floating docks; floating or submersible drilling or production platforms
Dredgers
Seagoing
Other
Floating or submersible drilling or production platforms
Other
Seagoing
Other
Other vessels, including warships and lifeboats other than rowing boats
Warships
Other
Seagoing
Other
Of a weight not exceeding 100|kg each
Other
Other floating structures (for example, rafts, tanks, coffer-dams, landing stages, buoys and beacons)
Inflatable rafts
Other
Vessels and other floating structures for breaking up
OPTICAL, PHOTOGRAPHIC, CINEMATOGRAPHIC, MEASURING, CHECKING, PRECISION, MEDICAL OR SURGICAL INSTRUMENTS AND APPARATUS; PARTS AND ACCESSORIES THEREOF
Optical fibres and optical fibre bundles; optical fibre cables other than those of heading|8544; sheets and plates of polarising material; lenses (including contact lenses), prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically worked
Optical fibres, optical fibre bundles and cables
Image conductor cables
Other
Image reverser made up from an assembly of optical fibres
Polymer optical fibre with: -|a poly(methyl methacrylate) core, -|a|cladding of fluorinated polymer, -|a diameter of not more than 3,0|mm, and -|a length of more than 150|m, of a kind used in the manufacture of polymer fibre cables
Other
Sheets and plates of polarising material
Material consisting of a polarising film, whether or not on rolls, supported on one or both sides by transparent material, whether or not with an adhesive layer, covered on one side or on both sides with a release film
Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut
Polarizer film, in rolls, consisting of a multilayered polyvinyl alcohol film, supported on either side by a triacetyl cellulose film, with a pressure sensitive adhesive and release film on one side
Other
Contact lenses
Spectacle lenses of glass
Not for the correction of vision
For the correction of vision
Both sides finished
Single focal
Other
Other
Spectacle lenses of other materials
Not for the correction of vision
For the correction of vision
Both sides finished
Single focal
Round organic uncut corrective eyeglass lens, finished on both sides: -|of a diameter of 4,9|cm or more but not more than 8,2|cm, -|of a height of 0,5|cm or more but not more than 1,8|cm, measured when the lens is laid on a flat surface from the horizontal plane to the lens front surface optical centre of a kind used to be processed in order to be adapted to a pair of glasses
Other
Other
Round organic uncut corrective eyeglass lens, finished on both sides: -|of a diameter of 4,9|cm or more but not more than 8,2|cm, -|of a height of 0,5|cm or more but not more than 1,8|cm, measured when the lens is laid on a flat surface from the horizontal plane to the lens front surface optical centre of a kind used to be processed in order to be adapted to a pair of glasses
Other
Other
Round organic uncut corrective eyeglass lens blanks, finished on one side: -|of a diameter of 5,9|cm or more but not more than 8,5|cm -|of a height of 1,2|cm or more but not more than 3,5|cm, measured when the lens is laid on a flat surface from the horizontal plane to the lens front surface optical centre of a kind used to be processed in order to be adapted to a pair of glasses
Other
Other
For use in civil aircraft
Unmounted optical elements made from moulded infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material
Rear projection screen, comprising a lenticular plastic plate
Rod of neodymium-doped yttrium-aluminium garnet (YAG) material, polished at both ends
Optical, diffuser, reflector or prism sheets, unprinted diffuser plates, whether or not possessing polarising properties, specifically cut
Reflector or diffuser sheets in rolls
Optical film with a minimum of 5|multi-layer structures, including a back side reflector, a front side coating and a contrast filter with a pitch of not more than 0,65|μm, for use in the manufacture of front projection screens
Polyethylene terephthalate film with a thickness of less than 300|µm according to ASTM D2103, having on one side prisms of acrylic resin with a prism angle of 90° and a prism pitch of 50|µm
Front filter comprising glass panels with special printing and film coating, for use in the manufacture of plasma display modules
Unmounted glass lenses, prisms and cemented elements for use in the manufacture or repair of goods of CN codes 9002, 9005, 9013|10 and|9015
Light guide panel made of poly(methyl methacrylate), -|whether or not cut, -|whether or not printed, for use in the manufacture of backlight units for flat screen TVs
Other
Lenses, prisms, mirrors and other optical elements, of any material, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically worked
Objective lenses
For cameras, projectors or photographic enlargers or reducers
Adjustable lens unit, having a focal length of 90|mm or more but not more than 180|mm and comprising a combination of between 4|and 8|glass or methacrylic lenses with a diameter of 120|mm or more but not more than 180|mm, each lens coated on at least one side with a magnesium fluoride layer, for use in the manufacture of video projectors
Infrared lens with motorised focus adjustment, -|using wavelengths of 3|μm or more but not more than 5|μm, -|providing a clear picture from 50|m to infinity, -|with fields of vision sizes of |3° x 2,25° and 9° x 6,75|°, -|with a weight of not more than 230|g, -|with a length of not more than 88|mm, -|with a diameter of not more than 46|mm, -|athermalised, for use in the manufacture of |thermal imaging cameras, infrared binoculars, weapons scopes
Lenses •measuring not more than 80 mm x 55 mm x 50 mm, •with a resolution of 160 lines/mm or better, and •with a zoom ratio of 18 times, of a kind used for the production of visualizers or live image cameras
Lenses •measuring not more than 180 mm x 100 mm x 100 mm at a maximum focal length of more than 200 mm, •with a resolution of 130 lines/mm or better, and •with a zoom ratio of 18 times of a kind used for the production of visualizers or live image cameras
Lenses •measuring not more than 125 mm x 65 mm x 65 mm, •with a resolution of 125 lines/mm or better, and •with a zoom ratio of 16 times of a kind used for the production of visualizers or live image cameras
Lens unit: -|having a focal length of 25|mm or more but not more than 150|mm, -|consisting of glass or plastic lenses, with a diameter of 60|mm or more but not more than 190|mm
Lenses •measuring not more than 180 mm×100 mm×100 mm at a maximum focal length of more than 200 mm, •with an etendue of 7 steradian mm² or better, and •with a zoom ratio of 16 times of a kind used for the production of visualizers or live image cameras
Lens assembly with: -|a field of view range of 58,5|deg or more, but not more than 194|deg, -|a focal length of 1,16|mm or more, but not more than 3,88|mm, -|a relative aperture of F/2.0|or more but not more than 2.6, -|a diameter of 17|mm or more but not more than 18,5|mm, for use in the manufacture of CMOS automotive cameras
Other
Other
Infrared lens with motorised focus adjustment, -|using wavelengths of 3|μm or more but not more than 5|μm, -|providing a clear picture from 50|m to infinity, -|with fields of vision sizes of |3° x 2,25° and 9° x 6,75|°, -|with a weight of not more than 230|g, -|with a length of not more than 88|mm, -|with a diameter of not more than 46|mm, -|athermalised, for use in the manufacture of |thermal imaging cameras, infrared binoculars, weapons scopes
Other
Filters
Filter, consisting of a plastic polarising membrane, a glass plate and a transparent protective film, mounted on a metal frame, for use in the manufacture of products falling within heading 8528
Other
Other
For use in civil aircraft
Lens, mounted, having a fixed focal length of 3,8|mm (±0,19|mm) or 8|mm (±0,4|mm), with a relative aperture of F2.0|and a diameter of not more than 33|mm, for use in the manufacture of charged-coupled (CCD) cameras
Optical unit, comprising 1|or 2|rows of optical glass fibres in the form of lenses and with a diameter of 0,85|mm or more but not more than 1,15|mm, embedded between 2|plastic plates
Mounted lenses made from infrared transmitting chalcogenide glass, or a combination of infrared transmitting chalcogenide glass and another lens material
Other
Frames and mountings for spectacles, goggles or the like, and parts thereof
Frames and mountings
Of plastics
For use in the manufacture of corrective glasses
Other
Of other materials
Of base metal
For use in the manufacture of corrective glasses
Other
Of other materials
Parts
Parts of spectacle frames and mountings, including bolts of the kind used for spectacle frames and mountings, of an alloy of titanium
Other
Spectacles, goggles and the like, corrective, protective or other
Sunglasses
With lenses optically worked
Other
With lenses of plastics
Other
Other
With lenses of plastics
Other
Binoculars, monoculars, other optical telescopes, and mountings therefor; other astronomical instruments and mountings therefor, but not including instruments for radio-astronomy
Binoculars
Other instruments
Parts and accessories (including mountings)
Photographic (other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than discharge lamps of heading|8539
Cameras of a kind used for preparing printing plates or cylinders
Cameras specially designed for underwater use, for aerial survey or for medical or surgical examination of internal organs; comparison cameras for forensic or criminological purposes
Instant print cameras
Other cameras
With a through-the-lens viewfinder (single lens reflex (SLR)), for roll film of a width not exceeding 35|mm
Other, for roll film of a width less than 35|mm
Other, for roll film of a width of 35|mm
Disposable cameras
Other
Other
Photographic flashlight apparatus and flashbulbs
Discharge lamp (electronic) flashlight apparatus
Other
Parts and accessories
For cameras
Other
Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus
Cameras
Projectors
For use in certain types of aircraft
Other
Parts and accessories
For cameras
For projectors
For use in certain types of aircraft
Other
Image projectors, other than cinematographic; photographic (other than cinematographic) enlargers and reducers
Projectors, enlargers and reducers
Parts and accessories
Apparatus and equipment for photographic (including cinematographic) laboratories, not specified or included elsewhere in this chapter; negatoscopes; projection screens
Apparatus and equipment for automatically developing photographic (including cinematographic) film or paper in rolls or for automatically exposing developed film to rolls of photographic paper
Other apparatus and equipment for photographic (including cinematographic) laboratories; negatoscopes
Projection screens
Parts and accessories
Of apparatus and equipment of subheadings 9010 50 00 or 9010 60 00
Other
Compound optical microscopes, including those for photomicrography, cinephotomicrography or microprojection
Stereoscopic microscopes
Fitted with equipment specifically designed for the handling and transport of semiconductor wafers or reticles
Other
Other microscopes, for photomicrography, cinephotomicrography or microprojection
Photomicrographic microscopes fitted with equipment specifically designed for the handling and transport of semiconductor wafers or reticles
Other
Other microscopes
Parts and accessories
Of apparatus of subheading|9011|10|10|or 9011|20|10
Other
Microscopes other than optical microscopes; diffraction apparatus
Microscopes other than optical microscopes; diffraction apparatus
Electron microscopes fitted with equipment specifically designed for the handling and transport of semiconductor wafers or reticles
Other
Parts and accessories
Of apparatus of subheading|9012|10|10
Other
Energy filters, to be installed on the column of electron microscopes
Other
Liquid crystal devices not constituting articles provided for more specifically in other headings; lasers, other than laser diodes; other optical appliances and instruments, not specified or included elsewhere in this chapter
Telescopic sights for fitting to arms; periscopes; telescopes designed to form parts of machines, appliances, instruments or apparatus of this chapter or Section|XVI
Telescopes designed to form parts of machines, appliances, instruments or apparatus of this Chapter or Section XVI
Other
Lasers, other than laser diodes
Carbon dioxide laser, stimulated by high frequency, having an output power of 12|W or more, but not more than 200|W
Laser head assemblies for use in the manufacture of measuring or checking machines for semiconductor wafers or devices
Laser for use in the manufacture of measuring or checking machines for semiconductor wafers or devices
Red, blue or green laser module -|consisting of one or more laser diodes on a metal submount with optical elements and electric connectors in a hermetic housing, -|with or without mirrors or a Periodically Poled Lithium Niobate (PPLN) crystal, -|with an optical output power of 1W or more but not more than 50W, -|only capable of emitting central wavelengths within an exact range depending on the colour: Red: 600|nm or more but not more than 665|nm; Green: 515|nm or more but not more than 560|nm; Blue: 435|nm or more but not more than 475|nm, -|and operational in two or more closely spaced wavelength bins mutually parted by 1nm or more but not more than 5nm
Optical unit, consisting at least of a laser diode and a photodiode operating at a typical wavelength of 635|nm or more but not more than 815|nm
Other
Other devices, appliances and instruments
Liquid crystal devices
Active matrix liquid crystal devices
Other
Other
Electronic semiconductor micro-mirror in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of: -|one or more monolithic application-specific integrated circuits (ASIC), -|one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material of a kind used for incorporation into products of Chapters 84-90|and 95
Other
Parts and accessories
For liquid crystal devices (LCD)
Other
For telescopic sights for fitting to arms or for periscopes
Other
Direction finding compasses; other navigational instruments and appliances
Direction finding compasses
For use in civil aircraft
Other
Electronic compass, as a geomagnetic sensor, in a housing (e.g. CSWLP, LGA, SOIC) suitable for fully automated printed circuit board (PCB) assembly,|with the following main components: -|a combination of one or more application-specific integrated circuits (ASIC) and -|one or more micro‑electromechanical sensors (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material, of a kind used in the manufacture of products falling in chapters 84-90|and 94
Other
Instruments and appliances for aeronautical or space navigation (other than compasses)
Inertial navigation systems
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other instruments and appliances
Parts and accessories
Of instruments of subheadings|9014|10|and 9014|20|for use in civil aircraft
Other
Surveying (including photogrammetrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefinders
Rangefinders
Electronic
For use in certain types of aircraft
Other
Other
For use in certain types of aircraft
Other
Theodolites and tachymeters (tacheometers)
Electronic
Other
Levels
Electronic
Other
Photogrammetrical, surveying instruments and appliances
Electronic
Other
Other instruments and appliances
Electronic
Meteorological, hydrological and geophysical instruments and apparatus
Meteorological instruments, for use in certain types of aircraft
Other
Other
Other
Instruments and appliances used in geodesy, topography, surveying or levelling; hydrographic instruments
Meteorological, hydrological and geophysical instruments and apparatus
Meteorological instruments, for use in certain types of aircraft
Other
Other
Parts and accessories
Parts of meteorological instruments and of rangefinders, for use in certain types of aircraft
Other
Balances of a sensitivity of 5|cg or better, with or without weights
Balances
Parts and accessories
Drawing, marking-out or mathematical calculating instruments (for example, drafting machines, pantographs, protractors, drawing sets, slide rules, disc calculators); instruments for measuring length, for use in the hand (for example, measuring rods and tapes, micrometers, callipers), not specified or included elsewhere in this chapter
Drafting tables and machines, whether or not automatic
Plotters
Other
Other drawing, marking-out or mathematical calculating instruments
Plotters
Other drawing instruments
Marking-out instruments
Mathematical calculating instruments (including slide rules, disc calculators and the like)
Micrometers, callipers and gauges
Other instruments
Measuring rods and tapes and divided scales
Other
Parts and accessories
Instruments and appliances used in medical, surgical, dental or veterinary sciences, including scintigraphic apparatus, other electromedical apparatus and sight-testing instruments
Electrodiagnostic apparatus (including apparatus for functional exploratory examination or for checking physiological parameters)
Electrocardiographs
Ultrasonic scanning apparatus
Magnetic resonance imaging apparatus
Scintigraphic apparatus
Other
Monitoring apparatus for simultaneous monitoring of two or more parameters
Other
Ultraviolet or infra-red ray apparatus
Syringes, needles, catheters, cannulae and the like
Syringes, with or without needles
Of plastics
Other
Tubular metal needles and needles for sutures
Tubular metal needles
Needles for sutures
Other
Other instruments and appliances, used in dental sciences
Dental drill engines, whether or not combined on a single base with other dental equipment
Other
Burrs, discs, drills and brushes, for use in dental drills
Other
Other ophthalmic instruments and appliances
Non-optical
Optical
Other instruments and appliances
Instruments and apparatus for measuring blood-pressure
Endoscopes
Renal dialysis equipment (artificial kidneys, kidney machines and dialysers)
Diathermic apparatus
Transfusion and infusion apparatus
Anaesthetic apparatus and instruments
Apparatus for nerve stimulation
Other
Mechano-therapy appliances; massage apparatus; psychological aptitude-testing apparatus; ozone therapy, oxygen therapy, aerosol therapy, artificial respiration or other therapeutic respiration apparatus
Mechano-therapy appliances; massage apparatus; psychological aptitude-testing apparatus
Electrical vibratory-massage apparatus
Other
Ozone therapy, oxygen therapy, aerosol therapy, artificial respiration or other therapeutic respiration apparatus
Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filters
Breathing appliances and gas masks (excluding parts thereof), for use in civil aircraft
Other
Parts of respiratory apparatus and of gas masks, for use in certain types of aircraft
Other
Orthopaedic appliances, including crutches, surgical belts and trusses; splints and other fracture appliances; artificial parts of the body; hearing aids and other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability
Orthopaedic or fracture appliances
Orthopaedic appliances
Splints and other fracture appliances
Artificial teeth and dental fittings
Artificial teeth
Of plastics
Of other materials
Other
Other artificial parts of the body
Artificial joints
Other
Ocular prostheses
Other
Hearing aids, excluding parts and accessories
Pacemakers for stimulating heart muscles, excluding parts and accessories
Other
Parts and accessories of hearing aids
Other
Apparatus based on the use of X-rays or of alpha, beta or gamma radiation, whether or not for medical, surgical, dental or veterinary uses, including radiography or radiotherapy apparatus, X-ray tubes and other X-ray generators, high tension generators, control panels and desks, screens, examination or treatment tables, chairs and the like
Apparatus based on the use of X-rays, whether or not for medical, surgical, dental or veterinary uses, including radiography or radiotherapy apparatus
Computed tomography apparatus
Other, for dental uses
Other, for medical, surgical or veterinary uses
For other uses
Apparatus based on the use of alpha, beta or gamma radiation, whether or not for medical, surgical, dental or veterinary uses, including radiography or radiotherapy apparatus
For medical, surgical, dental or veterinary uses
For other uses
X-ray tubes
Other, including parts and accessories
Panels for x-ray apparatus (x-ray flat panel sensors/x-ray sensors) consisting of a glass plate with a matrix of thin-film transistors, covered with a film of amorphous silicon, coated with a scintillator layer of caesium iodide and a metallised protective layer, or coated with a layer of amorphous selenium
Parts and accessories of apparatus based on the use of X-rays
Other
Instruments, apparatus and models, designed for demonstrational purposes (for example, in education or exhibitions), unsuitable for other uses
Of a type used for teaching physics, chemistry or technical subjects
Other
Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics)
Machines and appliances for testing metals
Electronic
Universal or for tensile tests
For hardness tests
Other
Other
Other machines and appliances
Electronic
For testing textiles, paper or paperboard
Other
Other
Parts and accessories
Hydrometers and similar floating instruments, thermometers, pyrometers, barometers, hygrometers and psychrometers, recording or not, and any combination of these instruments
Thermometers and pyrometers, not combined with other instruments
Liquid-filled, for direct reading
Clinical or veterinary thermometers
Other
For use in civil aircraft
Other
Other
Electronic
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other instruments
Barometers, not combined with other instruments
Other
Electronic
For use in civil aircraft
Other
Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of -|a combination of one or more monolithic application-specific integrated circuits (ASIC) and -|at least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material
Electronic semiconductor sensor for measuring at least two of the following quantities: -|Atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds, -|in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing : -|one or more monolithic application-specific integrated circuits (ASIC), -|one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material, of a kind used for incorporation into products of Chapters 84-90|and 95
Other
Other
For use in civil aircraft
Other
Parts and accessories
For use in civil aircraft
Other
Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading|9014, 9015, 9028|or 9032
For measuring or checking the flow or level of liquids
Electronic
Flow meters
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other
Flow meters
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
For measuring or checking pressure
Electronic
For use in civil aircraft
Other
Other
Spiral or metal diaphragm type pressure gauges
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other instruments or apparatus
Electronic
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Parts and accessories
For use in civil aircraft
Other
Instruments and apparatus for physical or chemical analysis (for example, polarimeters, refractometers, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomes
Gas or smoke analysis apparatus
Electronic
Other
Sensor element for gas or smoke analysis in motor vehicles, essentially consisting of a zirconium-ceramic element in a metal housing
Other
Chromatographs and electrophoresis instruments
Spectrometers, spectrophotometers and spectrographs using optical radiation (UV, visible, IR)
Other instruments and apparatus using optical radiation (UV, visible, IR)
Other instruments and apparatus
Exposure meters
Other
Electronic
pH meters, rH meters and other apparatus for measuring conductivity
Apparatus for performing measurements of the physical properties of semiconductor materials or of LCD substrates or associated insulating and conducting layers during the semiconductor wafer production process or the LCD production process
Other
Other
Viscometers, porosimeters and expansion meters
Other
Microtomes; parts and accessories
Microtomes
Parts and accessories
Of apparatus of subheadings|9027|20|to 9027|80
Of microtomes or of gas or smoke analysis apparatus
Gas, liquid or electricity supply or production meters, including calibrating meters therefor
Gas meters
Liquid meters
Electricity meters
For alternating current
For single-phase
For multiphase
Other
Parts and accessories
For electricity meters
Other
Revolution counters, production counters, taximeters, milometers, pedometers and the like; speed indicators and tachometers, other than those of heading|9014|or 9015; stroboscopes
Revolution counters, production counters, taximeters, milometers, pedometers and the like
Electric or electronic revolution counters, for use in civil aircraft
Speed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped with plastic housing and attached to connecting cable with a joining connector and mounting holders of a kind used in the manufacture of goods of Chapter 87
Other
Speed indicators and tachometers; stroboscopes
Speed indicators and tachometers
Speed indicators for vehicles
Clustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least: -|speed, -|engine revolutions, -|engine temperature, -|the fuel level communicating via CAN-BUS and K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87
Other
Other
For use in civil aircraft
Other
Stroboscopes
Parts and accessories
Of revolution counters, speed indicators and tachometers, for use in civil aircraft
Clustered instrument panel with the microprocessor control board, stepping motors and LED indicators showing at least: -|speed, -|engine revolutions, -|engine temperature, -|the fuel level communicating via CAN-BUS and K-LINE protocols, of a kind used in the manufacture of goods of Chapter 87
Other
Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading|9028; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiation
Instruments and apparatus for measuring or detecting ionising radiation
For use in civil aircraft
Other
Oscilloscopes and oscillographs
Cathode ray
For use in civil aircraft
Other
Other, with a recording device
For use in civil aircraft
Other
Other
Electronic
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Other instruments and apparatus, for measuring or checking voltage, current, resistance or power
Multimeters, without a recording device
For use in civil aircraft
Other
Multimeters, with a recording device
For use in civil aircraft
Other
Other, without a recording device
Electronic
For use in civil aircraft
Other
Other
Voltmeters
For use in civil aircraft
Other
Other
For use in civil aircraft
Resistance measuring instruments
Other
Other, with a recording device
For use in civil aircraft
Other
Other instruments and apparatus, specially designed for telecommunications (for example, cross-talk meters, gain measuring instruments, distortion factor meters, psophometers)
For use in civil aircraft
Other
Other instruments and apparatus
For measuring or checking semiconductor wafers or devices
Other, with a recording device
For use in civil aircraft
Other
Other
Electronic
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Parts and accessories
For apparatus of subheading|9030|82|00
Other
For use in civil aircraft
Other
Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this chapter; profile projectors
Machines for balancing mechanical parts
Test benches
Other optical instruments and appliances
For inspecting semiconductor wafers or devices or for inspecting photomasks or reticles used in manufacturing semiconductor devices
Other
Profile projectors
Other
Other instruments, appliances and machines
Electronic
For measuring or checking geometrical quantities
For inspecting semiconductor wafers or devices or for inspecting photomasks or reticles used in manufacturing semiconductor devices
Other
For use in civil aircraft
Apparatus for measuring the angle and direction of rotation of motor vehicles, consisting of at least one yaw rate sensor in the form of a monocrystalline quartz, whether or not combined with one or more measuring sensors, the whole contained in a housing
Semiconducting camshaft position sensor, with: -|a moulded plastic outer casing, -|an operational voltage of the control unit of 4,5|or more, but not more than 7|V@C@C|, for use in the manufacture of vehicles of Chapter 87
Programmable dual linear Hall sensor -|consisting of two non-electrically connected integrated circuits, a top die and a bottom die, -|positioned on the top and bottom of a lead frame, -|in a semiconductor housing, for use as a means for measuring angles, positions and currents in cars
Other
Other
For use in civil aircraft
Acceleration measurement device for automotive applications, comprising one or more active and/or passive elements and one or more sensors, the whole contained in a housing
Device for measuring wheel speed in vehicles (semi-conductor wheel speed sensor), consisting of: -|a monolithic integrated circuit in a housing, and -|one or more discrete SMD capacitors connected in parallel to the integrated circuit -|whether or not with integrated permanent magnets for detecting the movement of a pulse generator
Electronic semiconductor accelerometer in a housing, mainly consisting of -|a combination of one or more monolithic application-specific integrated circuits (ASIC) and -|one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material of a kind used for incorporation|into products under chapter 84|- 90|and 95
Electronic semiconductor sensor for measuring acceleration and/or angular rate: -|whether or not in combination with a magnetic field sensor; -|in a housing suitable for the automatic printing of conductor boards or Bare Die technology, |containing: -|one or more monolithic application-specific integrated circuits (ASIC), -|one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material, -|whether or not with an integrated microcontroller of a kind used for incorporation into products of Chapters 84-90|and 95
Combined electronic acceleration- and geomagnetic sensor, in a housing suitable for the automatic printing of conductor boards, mainly consisting of a combination of: -|one or more monolithic application-specific integrated circuits (ASIC) and -|one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material, of a kind used for incorporation into products under chapter 84-90|and 95
Gyroscopic sensor for measuring lateral acceleration of the vehicle vertical axis comprising -|a piezoelectric crystal for generating an electrical potential during deformation and -|a plastic box with metal holder of a kind used in the manufacture of goods of Chapter 87
Acceleration sensor, printed circuit board and connector, moulded together in plastic, for monitoring acceleration "G" and providing the values for further evaluation of triggering the airbags, of a kind used in the manufacture of goods of Chapter 87
Speed sensor using the Hall effect for measuring wheels rotation in a motor vehicle equipped with plastic housing and attached to connecting cable with a joining connector and mounting holders of a kind used in the manufacture of goods of Chapter 87
Other
Other
For measuring or checking geometrical quantities
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Functional Test Machine for calibrating|and image quality testing lenses in automotive cameras
Other
Parts and accessories
For apparatus of subheading|9031|41|00|or for optical instruments and appliances for measuring surface particulate contamination on semiconductor wafers of subheading|9031|49|90
For apparatus of subheading|9031|80|32
Other
Of instruments, appliances and machines of subheading|9031|80, for use in civil aircraft
Assembly for a laser align sensor, in the form of a printed circuit comprising optical filters and a charge-coupled image (CCD) sensor, the whole contained in a housing
Keypads of silicone or plastic, -|whether or not with parts of metal, plastic, glass fibre reinforced epoxide resin or wood, -|whether or not printed or surface treated, -|whether or not with electrical conducting elements -|whether or not with keypads foil glued on the keyboard -|whether or not with protective foil -|single or multilayer
Other
Automatic regulating or controlling instruments and apparatus
Thermostats
Electronic
For use in civil aircraft
Other
Other
With electrical triggering device
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Manostats
For use in civil aircraft
Other
Other instruments and apparatus
Hydraulic or pneumatic
For use in civil aircraft
Other
Other
For use in civil aircraft
Automotive airbag shock-sensor, comprising a contact capable of switching a current of 12|A at a voltage of 30|V, having a typical contact resistance of 80|mOhm
Electronic controller of electric power steering (EPS controller)
Digital valve controller for controlling liquids and gases
Other
Parts and accessories
For use in civil aircraft
Other
Parts and accessories (not specified or included elsewhere in this chapter) for machines, appliances, instruments or apparatus of Chapter|90
Light-Emitting Diode (LED) backlights modules, which are lighting sources that consist of one or more LEDs, and one or more connectors and are mounted on a printed circuit or other similar substrate, and other passive components, whether or not combined with optical components or protective diodes, and used as backlights illumination for liquid crystal displays (LCDs)
Other
CLOCKS AND WATCHES AND PARTS THEREOF
Wristwatches, pocket-watches and other watches, including stopwatches, with case of precious metal or of metal clad with precious metal
Wristwatches, electrically operated, whether or not incorporating a stopwatch facility
With mechanical display only
Other
Other wristwatches, whether or not incorporating a stopwatch facility
With automatic winding
Other
Other
Electrically operated
Other
Wristwatches, pocket-watches and other watches, including stopwatches, other than those of heading|9101
Wristwatches, electrically operated, whether or not incorporating a stopwatch facility
With mechanical display only
With opto-electronic display only
Other
Other wristwatches, whether or not incorporating a stopwatch facility
With automatic winding
Other
Other
Electrically operated
Other
Clocks with watch movements, excluding clocks of heading|9104
Electrically operated
Other
Instrument panel clocks and clocks of a similar type for vehicles, aircraft, spacecraft or vessels
For use in civil aircraft
Other
Other clocks
Alarm clocks
Electrically operated
Other
Wall clocks
Electrically operated
Other
Other
Electrically operated
Other
Time of day recording apparatus and apparatus for measuring, recording or otherwise indicating intervals of time, with clock or watch movement or with synchronous motor (for example, time-registers, time-recorders)
Time-registers; time-recorders
Other
Time switches, with clock or watch movement or with synchronous motor
Time switches, with clock or watch movement, used in automatic systems, intended in certain types of aircraft
Other
Watch movements, complete and assembled
Electrically operated
With mechanical display only or with a device to which a mechanical display can be incorporated
With opto-electronic display only
Other
With automatic winding
Other
Clock movements, complete and assembled
Electrically operated
Of a width or diameter not exceeding|50|mm, for use in civil aircraft
Other
Other
Of a width or diameter not exceeding|50|mm, for use in civil aircraft
Other
Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movements
Of watches
Complete movements, unassembled or partly assembled (movement sets)
With balance wheel and hairspring
Other
Incomplete movements, assembled
Used in automatic systems, for use in certain types of aircraft
Other
Rough movements
Other
Incomplete watch or clock movements, assembled, used in automatic systems, intended for certain types of aircraft
Other
Watch cases and parts thereof
Cases of precious metal or of metal clad with precious metal
Cases of base metal, whether or not gold- or silver-plated
Other cases
Parts
Clock cases and cases of a similar type for other goods of this chapter, and parts thereof
Cases
Parts
Watch straps, watch bands and watch bracelets, and parts thereof
Of precious metal or of metal clad with precious metal
Of precious metal
Of metal clad with precious metal
Of base metal, whether or not gold- or silver-plated
Other
Of leather or of composition leather
Hand-made
Other
Of textile materials
Hand-made
Other
Other
Other clock or watch parts
Springs, including hairsprings
Intended for certain types of aircraft
Other
Dials
Intended for certain types of aircraft
Other
Plates and bridges
Intended for certain types of aircraft
Other
Other
Intended for certain types of aircraft
Other
MUSICAL INSTRUMENTS; PARTS AND ACCESSORIES OF SUCH ARTICLES
Pianos, including automatic pianos; harpsichords and other keyboard stringed instruments
Upright pianos
New
Used
Grand pianos
Other
Other string musical instruments (for example, guitars, violins, harps)
Played with a bow
Violins
Other
Other
Guitars
Other
Wind musical instruments (for example, keyboard pipe organs, accordions, clarinets, trumpets, bagpipes), other than fairground organs and mechanical street organs
Brass-wind instruments
Other
Accordions and similar instruments
Mouth organs
Keyboard pipe organs; harmoniums and similar keyboard instruments with free metal reeds
Other
Percussion musical instruments (for example, drums, xylophones, cymbals, castanets, maracas)
Musical instruments, the sound of which is produced, or must be amplified, electrically (for example, organs, guitars, accordions)
Keyboard instruments, other than accordions
Organs
Digital pianos
Synthesisers
Other
Other
Guitars
Other
Musical boxes, fairground organs, mechanical street organs, mechanical singing birds, musical saws and other musical instruments not falling within any other heading of this chapter; decoy calls of all kinds; whistles, call horns and other mouth-blown sound signalling instruments
Musical boxes
Other
Parts (for example, mechanisms for musical boxes) and accessories (for example, cards, discs and rolls for mechanical instruments) of musical instruments; metronomes, tuning forks and pitch pipes of all kinds
Musical instrument strings
Other
Parts and accessories for pianos
Parts and accessories for the musical instruments of heading|9202
Parts and accessories for the musical instruments of heading|9207
Other
Parts and accessories for the musical instruments of heading|9205
Other
Metronomes, tuning forks and pitch pipes
Mechanisms for musical boxes
Other
ARMS AND AMMUNITION; PARTS AND ACCESSORIES THEREOF
Military weapons, other than revolvers, pistols and the arms of heading|9307
Artillery weapons (for example, guns, howitzers and mortars)
Rocket launchers; flame-throwers; grenade launchers; torpedo tubes and similar projectors
Other
Revolvers and pistols, other than those of heading|9303|or 9304
Other firearms and similar devices which operate by the firing of an explosive charge (for example, sporting shotguns and rifles, muzzle-loading firearms, Very pistols and other devices designed to project only signal flares, pistols and revolvers for firing blank ammunition, captive-bolt humane killers, line-throwing guns)
Muzzle-loading firearms
Other sporting, hunting or target-shooting shotguns, including combination shotgun-rifles
Single-barrelled, smooth bore
Other
Other sporting, hunting or target-shooting rifles
Other
Other arms (for example, spring, air or gas guns and pistols, truncheons), excluding those of heading|9307
Parts and accessories of articles of headings|9301|to 9304
Of revolvers or pistols
Of shotguns or rifles of heading|9303
Shotgun barrels
Other
Other
Of military weapons of heading|9301
Other
Bombs, grenades, torpedoes, mines, missiles and similar munitions of war and parts thereof; cartridges and other ammunition and projectiles and parts thereof, including shot and cartridge wads
Shotgun cartridges and parts thereof; air gun pellets
Cartridges
Other
Cases
Other
Other cartridges and parts thereof
For revolvers and pistols of heading|9302|and for sub-machine-guns of heading|9301
Other
For military weapons
Other
Other
For military purposes
Other
Swords, cutlasses, bayonets, lances and similar arms and parts thereof and scabbards and sheaths therefor
FURNITURE; BEDDING, MATTRESSES, MATTRESS SUPPORTS, CUSHIONS AND SIMILAR STUFFED FURNISHINGS; LAMPS AND LIGHTING FITTINGS, NOT ELSEWHERE SPECIFIED OR INCLUDED; ILLUMINATED SIGNS, ILLUMINATED NAMEPLATES AND THE LIKE; PREFABRICATED BUILDINGS
Seats (other than those of heading|9402), whether or not convertible into beds, and parts thereof
Seats of a kind used for aircraft
Not leather covered, for use in civil aircraft
Other
Seats of a kind used for motor vehicles
Swivel seats with variable height adjustment
Seats other than garden seats or camping equipment, convertible into beds
Seats of cane, osier, bamboo or similar materials
Of bamboo or rattan
Other
Other seats, with wooden frames
Upholstered
Other
Other seats, with metal frames
Upholstered
Other
Other seats
Parts
Of seats of a kind used for aircraft
Of seats specially designed for the crew, for use in certain types of aircraft
Other
Other
Of wood
Other
Ratchet disk of a kind used in the manufacture of reclining car seats
Sidemember with a thickness of 0,8|or more but not more than 3,0|mm, used in the manufacture of reclining car seats
Steel bracket for mounting safety features seats with thickness of 1|mm or more but not more than 2.5|mm used in the manufacture of reclining car seats
Steel handles for controlling the seat adjustment mechanism used in the manufacture of reclining car seats
Outer part of a headrest made of perforated bovine leather, lined with a scrim-reinforced lamination liner and without foam padding, after reworking (stitching of the leather and embroidery application) used in manufacture of seats of motor vehicles
Other
Medical, surgical, dental or veterinary furniture (for example, operating tables, examination tables, hospital beds with mechanical fittings, dentists' chairs); barbers' chairs and similar chairs, having rotating as well as both reclining and elevating movements; parts of the foregoing articles
Dentists', barbers' or similar chairs and parts thereof
Other
Other furniture and parts thereof
Metal furniture of a kind used in offices
Not exceeding 80|cm in height
Desks
Other
Exceeding 80|cm in height
Cupboards with doors, shutters or flaps
Filing, card-index and other cabinets
Other
Other metal furniture
Beds
For use in civil aircraft
Other
Other
For use in civil aircraft
Other
Wooden furniture of a kind used in offices
Not exceeding 80|cm in height
Desks
Other
Exceeding 80|cm in height
Cupboards with doors, shutters or flaps; filing, card-index and other cabinets
Other
Wooden furniture of a kind used in the kitchen
Fitted kitchen units
Hand-made
Other
Other
Hand-made
Other
Wooden furniture of a kind used in the bedroom
Other wooden furniture
Wooden furniture of a kind used in the dining room and the living room
Wooden furniture of a kind used in shops
Other wooden furniture
Furniture of plastics
For use in civil aircraft
Other
Furniture of other materials, including cane, osier, bamboo or similar materials
Of bamboo or rattan
Hand-made
Other
Other
Hand-made
Other
Parts
Of metal
Hand-made
Other
Of wood
Hand-made
Other
Of other materials
Hand-made
Other
Mattress supports; articles of bedding and similar furnishing (for example, mattresses, quilts, eiderdowns, cushions, pouffes and pillows) fitted with springs or stuffed or internally fitted with any material or of cellular rubber or plastics, whether or not covered
Mattress supports
Mattresses
Of cellular rubber or plastics, whether or not covered
Of rubber
Of plastics
Of other materials
Spring interior
Other
Sleeping bags
Other
Filled with feathers or down
Other
Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or included
Chandeliers and other electric ceiling or wall lighting fittings, excluding those of a kind used for lighting public open spaces or thoroughfares
Of plastics or of ceramic materials
Of plastics, of a kind used with filament lamps
For use in civil aircraft
Other
Other
Of plastics for use in civil aircrafts
Other
Of glass
Of other materials
Of a kind used with filament lamps
Hand-made
Of base metal, for use in civil aircraft
Other
Other
Of base metal, for use in civil aircraft
Hand-made
Other
Electric table, desk, bedside or floor-standing lamps
Of plastics or of ceramic materials
Of plastics, of a kind used with filament lamps
Other
Of glass
Of other materials
Of a kind used with filament lamps
Other
Hand-made
Other
Lighting sets of a kind used for Christmas trees
Other electric lamps and lighting fittings
Searchlights and spotlights
Other
Of plastics
Of a kind used with filament lamps
Of a kind used with tubular fluorescent lamps
Electric light assembly of synthetic material containing 3|fluorescent tubes (RBG) of a diameter of 3,0|mm (±0,2|mm), of a length of 420|mm (±1|mm) or more but not more than 600|mm (±1|mm), for the manufacture of goods of heading 8528
Other
Other
Ambient light module with a length of 300|mm or more but not more than 600|mm, based on a light engine of a series of 3|or more but not more than 9|specific one chip red green and blue light emitting diodes mounted on a PCB, with light coupled to the front and/or back of the flat TV set
LED array of white silicone, containing: -|an LED matrix module measuring 38,6|mm|!x!|20,6|mm|(±0,1|mm), |equipped with 128|red and green LED chips, and -|a flexible printed circuit board, equipped with a Negative Temperature Coefficient Thermistor
Printed circuit board with LED diodes: - whether or not equipped with prisms/lens, and - whether or not fitted with connector(s) for the manufacture of backlight units for goods of heading 8528
Other
Of other materials
Of a kind used with filament lamps
Of a kind used with tubular fluorescent lamps
Other
Hand-made
Other
Non-electrical lamps and lighting fittings
Hand-made
Other
Illuminated signs, illuminated nameplates and the like
Of plastics
Illuminated signs, illuminated name-plates and the like, for use in civil aircraft
Other
Of other materials
Illuminated signs, illuminated name-plates and the like, of base metal, for use in civil aircraft
Hand-made
Other
Parts
Of glass
Articles for electrical lighting fittings (excluding searchlights and spotlights)
Other
Of plastics
Parts of the articles of subheading 9405|10|or 9405|60, for use in civil aircraft
Other
Other
Parts of the articles of subheading 9405|10|or 9405|60, of base metal, for use in civil aircraft
Hand-made
Other
Prefabricated buildings
Mobile homes
Other
Of wood
Of iron or steel
Greenhouses
Other
Of other materials
TOYS, GAMES AND SPORTS REQUISITES; PARTS AND ACCESSORIES THEREOF
Tricycles, scooters, pedal cars and similar wheeled toys; dolls' carriages; dolls; other toys; reduced-size ('scale') models and similar recreational models, working or not; puzzles of all kinds
Tricycles, scooters, pedal cars and similar wheeled toys; dolls' carriages
Dolls representing only human beings and parts and accessories thereof
Dolls
Ornamental dolls dressed so as to reflect the folklore characteristic of the country of origin, hand-made
Other
Parts and accessories
Electric trains, including tracks, signals and other accessories therefor; reduced-size (scale) model assembly kits
Other construction sets and constructional toys
Of plastics
Of other materials
Hand-made, of wood
Other
Toys representing animals or non-human creatures
Stuffed
Other
Hand-made, of wood
Other
Toy musical instruments and apparatus
Hand-made, of wood
Other
Puzzles
Of wood
Hand-made
Other
Other
Other toys, put up in sets or outfits
Other toys and models, incorporating a motor
Of plastics
Cable car scale models for printing
Other
Of other materials
Other
Toy weapons
Hand-made, of wood
Other
Die-cast miniature models of metal
Other
Of plastics
Cable car scale models for printing
Portable interactive electronic education devices primarily designed for children
Other
Other
Hand-made, of wood
Other
Video game consoles and machines, articles for funfair, table or parlour games, including pintables, billiards, special tables for casino games and automatic bowling alley equipment
Articles and accessories for billiards of all kinds
Other games, operated by coins, banknotes, bank cards, tokens or by any other means of payment, other than automatic bowling alley equipment
Games with screen
Other games
Parts
Playing cards
Video game consoles and machines, other than those of subheading|9504|30
Other
Electric car racing sets, having the character of competitive games
Other
Festive, carnival or other entertainment articles, including conjuring tricks and novelty jokes
Articles for Christmas festivities
Of glass
Of other materials
Other
Articles and equipment for general physical exercise, gymnastics, athletics, other sports (including table-tennis) or outdoor games, not specified or included elsewhere in this chapter; swimming pools and paddling pools
Snow-skis and other snow-ski equipment
Skis
Cross-country skis
Downhill skis
Monoskis and snowboards
Other
Other skis
Ski-fastenings (ski-bindings)
Other
Water-skis, surf-bοards, sailboards and other water-sport equipment
Sailboards
Other
Golf clubs and other golf equipment
Clubs, complete
Balls
Other
Parts of golf clubs
Other
Articles and equipment for table tennis
Tennis, badminton or similar rackets, whether or not strung
Lawn-tennis rackets, whether or not strung
Other
Balls, other than golf balls and table-tennis balls
Lawn-tennis balls
Inflatable
Other
Cricket and polo balls
Other
Ice skates and roller skates, including skating boots with skates attached
Ice skates
Roller skates
Parts and accessories
Other
Articles and equipment for general physical exercise, gymnastics or athletics
Exercising apparatus with adjustable resistance mechanisms
Other
Other
Cricket and polo equipment, other than balls
Other
Fishing rods, fish-hooks and other line fishing tackle; fish landing nets, butterfly nets and similar nets; decoy 'birds' (other than those of heading|9208|or 9705) and similar hunting or shooting requisites
Fishing rods
Fish-hooks, whether or not snelled
Fish-hooks, not snelled
Other
Fishing reels
Other
Roundabouts, swings, shooting galleries and other fairground amusements; travelling circuses and travelling menageries; travelling theatres
Travelling circuses and travelling menageries
with live animals
Other
Other
with live animals
Other
MISCELLANEOUS MANUFACTURED ARTICLES
Worked ivory, bone, tortoiseshell, horn, antlers, coral, mother-of-pearl and other animal carving material, and articles of these materials (including articles obtained by moulding)
Worked ivory and articles of ivory
Hand-made
Other
Other
Worked vegetable or mineral carving material and articles of these materials; moulded or carved articles of wax, of stearin, of natural gums or natural resins or of modelling pastes, and other moulded or carved articles, not elsewhere specified or included; worked, unhardened gelatin (except gelatin of heading|3503) and articles of unhardened gelatin
Hand-made
Other
Brooms, brushes (including brushes constituting parts of machines, appliances or vehicles), hand-operated mechanical floor sweepers, not motorised, mops and feather dusters; prepared knots and tufts for broom or brush making; paint pads and rollers; squeegees (other than roller squeegees)
Brooms and brushes, consisting of twigs or other vegetable materials bound together, with or without handles
Toothbrushes, shaving brushes, hairbrushes, nail brushes, eyelash brushes and other toilet brushes for use on the person, including such brushes constituting parts of appliances
Toothbrushes, including dental-plate brushes
Other
Hair brushes
Other
Artists' brushes, writing brushes and similar brushes for the application of cosmetics
Artists' and writing brushes
Brushes for the application of cosmetics
Paint, distemper, varnish or similar brushes (other than brushes of subheading|9603|30); paint pads and rollers
Paint, distemper, varnish or similar brushes
Paint pads and rollers
Other brushes constituting parts of machines, appliances or vehicles
Other
Hand-operated mechanical floor sweepers, not motorised
Other
Road-sweeping brushes; household type brooms and brushes, including shoe brushes and clothes brushes; brushes for grooming animals
Other
Hand sieves and hand riddles
Travel sets for personal toilet, sewing or shoe or clothes cleaning
Buttons, press-fasteners, snap-fasteners and press studs, button moulds and other parts of these articles; button blanks
Press-fasteners, snap-fasteners and press studs and parts therefor
Buttons
Of plastics, not covered with textile material
Of base metal, not covered with textile material
Other
Button moulds and other parts of buttons; button blanks
Slide fasteners and parts thereof
Slide fasteners
Fitted with chain scoops of base metal
Other
Parts
Of base metal, including narrow strips mounted with chain scoops of base metal
Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers
Other
Other
Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers
Other
Ballpoint pens; felt-tipped and other porous-tipped pens and markers; fountain pens, stylograph pens and other pens; duplicating stylos; propelling or sliding pencils; pen-holders, pencil-holders and similar holders; parts (including caps and clips) of the foregoing articles, other than those of heading|9609
Ballpoint pens
With liquid ink (rolling ball pens)
Other
With replaceable refill
Other
Felt-tipped and other porous-tipped pens and markers
Fountain pens, stylograph pens and other pens
Propelling or sliding pencils
Sets of articles from two or more of the foregoing subheadings
Refills for ballpoint pens, comprising the ball point and ink-reservoir
Other
Pen nibs and nib points
Non-fibrous plastic pen-tips with an internal canal
Felt tips and other porous-tips for markers, without internal canal
Other
Other
Pencils (other than pencils of heading|9608), crayons, pencil leads, pastels, drawing charcoals, writing or drawing chalks and tailors' chalks
Pencils and crayons, with leads encased in a rigid sheath
With 'leads' of graphite
Other
Pencil leads, black or coloured
Other
Pastels and drawing charcoals
Other
Slates and boards, with writing or drawing surfaces, whether or not framed
Date, sealing or numbering stamps, and the like (including devices for printing or embossing labels), designed for operating in the hand; hand-operated composing sticks and hand printing sets incorporating such composing sticks
Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink-pads, whether or not inked, with or without boxes
Ribbons
Of plastics
Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation)
Other
Of man-made fibres, measuring less than 30|mm in width, permanently put in plastic or metal cartridges of a kind used in automatic typewriters, automatic data-processing equipment and other machines
Other
Ink-pads
Cigarette lighters and other lighters, whether or not mechanical or electrical, and parts thereof other than flints and wicks
Pocket lighters, gas fuelled, non-refillable
Pocket lighters, gas fuelled, refillable
Other lighters
Parts
Smoking pipes (including pipe bowls) and cigar or cigarette holders, and parts thereof
Roughly shaped blocks of wood or root, for the manufacture of pipes
Other
Combs, hair-slides and the like; hairpins, curling pins, curling grips, hair-curlers and the like, other than those of heading|8516, and parts thereof
Combs, hair-slides and the like
Of hard rubber or plastics
Other
Other
Scent sprays and similar toilet sprays, and mounts and heads therefor; powder-puffs and pads for the application of cosmetics or toilet preparations
Scent sprays and similar toilet sprays, and mounts and heads therefor
Toilet sprays
Mounts and heads
Powder-puffs and pads for the application of cosmetics or toilet preparations
Vacuum flasks and other vacuum vessels, complete with cases; parts thereof other than glass inners
Tailors' dummies and other lay figures; automata and other animated displays used for shop window dressing
Sanitary towels (pads) and tampons, napkins and napkin liners for babies, and similar articles, of any material
Of wadding of textile materials
Of man-made fibres
Other
Of other textile materials
Sanitary towels (pads), tampons and similar articles
Knitted or crocheted
Other
Napkins and napkin liners for babies, and similar articles
Knitted or crocheted
Other
Of other materials
Sanitary towels (pads), tampons and similar articles
Sanitary towels (pads)
Of paper pulp, paper, cellulose wadding or webs of cellulose fibres
Of other materials
Tampons
Of paper pulp, paper, cellulose wadding or webs of cellulose fibres
Of other materials
Other
Of paper pulp, paper, cellulose wadding or webs of cellulose fibres
Of other materials
Napkins and napkin liners for babies, and similar articles
Napkins and napkin liners for babies
Of paper pulp, paper, cellulose wadding or webs of cellulose fibres
Of other materials
Other (for example, incontinence care articles)
Of paper pulp, paper, cellulose wadding or webs of cellulose fibres
Of other materials
WORKS OF ART, COLLECTORS' PIECES AND ANTIQUES
Paintings, drawings and pastels, executed entirely by hand, other than drawings of heading|4906|and other than hand-painted or hand-decorated manufactured articles; collages and similar decorative plaques
Paintings, drawings and pastels
Other
Original engravings, prints and lithographs
Wood in the form of logs or squared logs with simple process in the surface, carved or ginely threaded or painted, does not have significant added-value and no significant change in shape
Other
Original sculptures and statuary, in any material
Postage or revenue stamps, stamp-postmarks, first-day covers, postal stationery (stamped paper), and the like, used or unused, other than those of heading|4907
Collections and collectors' pieces of zoological, botanical, mineralogical, anatomical, historical, archaeological, palaeontological, ethnographic or numismatic interest
Collectors’ pieces of wood
Collectors’ pieces of silver or gold
Collections and collectors' pieces of zoological, anatomical, historical, archaeological, palaeontological or ethnographic interest containing animal products
Other
Antiques of an age exceeding 100|years
COMPLETE INDUSTRIAL PLANT
Component parts of complete industrial plant in the framework of external trade (Commission Regulation EC No 113/2010 of 9.02.2010)
Classified in Chapter 01
Classified in Chapter 02
Classified in Chapter 03
Classified in Chapter 04
Classified in Chapter 05
Classified in Chapter 06
Classified in Chapter 07
Classified in Chapter 08
Classified in Chapter 09
Classified in Chapter 10
Classified in Chapter 11
Classified in Chapter 12
Classified in Chapter 13
Classified in Chapter 14
Classified in Chapter 15
Classified in Chapter 16
Classified in Chapter 17
Classified in Chapter 18
Classified in Chapter 19
Classified in Chapter 20
Classified in Chapter 21
Classified in Chapter 22
Classified in Chapter 23
Classified in Chapter 24
Classified in Chapter 25
Classified in Chapter 26
Classified in Chapter 27
Classified in Chapter 28
Classified in Chapter 29
Classified in Chapter 30
Classified in Chapter 31
Classified in Chapter 32
Classified in Chapter 33
Classified in Chapter 34
Classified in Chapter 35
Classified in Chapter 36
Classified in Chapter 37
Classified in Chapter 38
Classified in Chapter 39
Classified in Chapter 40
Classified in Chapter 41
Classified in Chapter 42
Classified in Chapter 43
Classified in Chapter 44
Classified in Chapter 45
Classified in Chapter 46
Classified in Chapter 47
Classified in Chapter 48
Classified in Chapter 49
Classified in Chapter 50
Classified in Chapter 51
Classified in Chapter 52
Classified in Chapter 53
Classified in Chapter 54
Classified in Chapter 55
Classified in Chapter 56
Classified in Chapter 57
Classified in Chapter 58
Classified in Chapter 59
Classified in Chapter 60
Classified in Chapter 61
Classified in Chapter 62
Classified in Chapter 63
Classified in Chapter 64
Classified in Chapter 65
Classified in Chapter 66
Classified in Chapter 67
Classified in Chapter 68
Classified in Chapter 69
Classified in Chapter 70
Classified in Chapter 71
Classified in Chapter 72
Classified in Chapter 73
Classified in Chapter 74
Classified in Chapter 75
Classified in Chapter 76
Classified in Chapter 78
Classified in Chapter 79
Classified in Chapter 80
Classified in Chapter 81
Classified in Chapter 82
Classified in Chapter 83
Classified in Chapter 84
Classified in Chapter 85
Classified in Chapter 86
Classified in Chapter 87
Classified in Chapter 88
Classified in Chapter 89
Classified in Chapter 90
Classified in Chapter 91
Classified in Chapter 92
Classified in Chapter 93
Classified in Chapter 94
Classified in Chapter 95
Classified in Chapter 96
Classified in Chapter 97
SPECIAL COMBINED NOMENCLATURE CODES
Certain goods, as provided for in Council Regulation (EC) No 1186/2009 (Import and Export)
Personal property belonging to natural persons transferring their normal place of residence
The following goods, other than those mentioned above: - Trousseaux and household effects belonging to a person transferring his or her normal place of residence on the occasion of his or her marriage; personal property acquired by inheritance; - School outfits, educational materials and related household effects; - Coffins containing bodies, funerary urns containing the ashes of deceased persons and ornamental funerary articles; - Goods for charitable or philanthropic organisations and goods for the benefit of disaster victims.
Goods delivered to vessels and aircraft
goods from CN chapters 1 to 24
goods from CN chapter 27
goods classified elsewhere
Goods delivered for the crew of the offshore installation or for the operation of the engines, machines and other equipment of the offshore installation
goods from CN chapters 1 to 24
goods from CN chapter 27
goods classified elsewhere
Code used only in trading of goods between Member States for individual transactions whose value is less than €|200 and for reporting residual products in some cases